Documentation/devicetree/bindings/regulator/da9211.txt

   1 * Dialog Semiconductor DA9211/DA9213 Voltage Regulator
   2
   3 Required properties:
   4 - compatible: "dlg,da9211" or "dlg,da9213".
   5 - reg: I2C slave address, usually 0x68.
   6 - interrupts: the interrupt outputs of the controller
   7 - regulators: A node that houses a sub-node for each regulator within the
   8   device. Each sub-node is identified using the node's name, with valid
   9   values listed below. The content of each sub-node is defined by the
  10   standard binding for regulators; see regulator.txt.
  11   BUCKA and BUCKB.
  12
  13 Optional properties:
  14 - enable-gpios: platform gpio for control of BUCKA/BUCKB.
  15 - Any optional property defined in regulator.txt
  16
  17 Example 1) DA9211
  18
  19         pmic: da9211@68 {
  20                 compatible = "dlg,da9211";
  21                 reg = <0x68>;
  22                 interrupts = <3 27>;
  23
  24                 regulators {
  25                         BUCKA {
  26                                 regulator-name = "VBUCKA";
  27                                 regulator-min-microvolt = < 300000>;
  28                                 regulator-max-microvolt = <1570000>;
  29                                 regulator-min-microamp  = <2000000>;
  30                                 regulator-max-microamp  = <5000000>;
  31                                 enable-gpios = <&gpio 27 0>;
  32                         };
  33                         BUCKB {
  34                                 regulator-name = "VBUCKB";
  35                                 regulator-min-microvolt = < 300000>;
  36                                 regulator-max-microvolt = <1570000>;
  37                                 regulator-min-microamp  = <2000000>;
  38                                 regulator-max-microamp  = <5000000>;
  39                                 enable-gpios = <&gpio 17 0>;
  40                         };
  41                 };
  42         };
  43
  44 Example 2) DA9213
  45         pmic: da9213@68 {
  46                 compatible = "dlg,da9213";
  47                 reg = <0x68>;
  48                 interrupts = <3 27>;
  49
  50                 regulators {
  51                         BUCKA {
  52                                 regulator-name = "VBUCKA";
  53                                 regulator-min-microvolt = < 300000>;
  54                                 regulator-max-microvolt = <1570000>;
  55                                 regulator-min-microamp  = <3000000>;
  56                                 regulator-max-microamp  = <6000000>;
  57                                 enable-gpios = <&gpio 27 0>;
  58                         };
  59                         BUCKB {
  60                                 regulator-name = "VBUCKB";
  61                                 regulator-min-microvolt = < 300000>;
  62                                 regulator-max-microvolt = <1570000>;
  63                                 regulator-min-microamp  = <3000000>;
  64                                 regulator-max-microamp  = <6000000>;
  65                                 enable-gpios = <&gpio 17 0>;
  66                         };
  67                 };
  68         };