Merge branch 'i2c/for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
[deliverable/linux.git] / Documentation / devicetree / bindings / regulator / pv88080.txt
1 * Powerventure Semiconductor PV88080 Voltage Regulator
2
3 Required properties:
4 - compatible: "pvs,pv88080".
5 - reg: I2C slave address, usually 0x49.
6 - interrupts: the interrupt outputs of the controller
7 - regulators: A node that houses a sub-node for each regulator within the
8 device. Each sub-node is identified using the node's name, with valid
9 values listed below. The content of each sub-node is defined by the
10 standard binding for regulators; see regulator.txt.
11 BUCK1, BUCK2, and BUCK3.
12
13 Optional properties:
14 - Any optional property defined in regulator.txt
15
16 Example
17
18 pmic: pv88080@49 {
19 compatible = "pvs,pv88080";
20 reg = <0x49>;
21 interrupt-parent = <&gpio>;
22 interrupts = <24 24>;
23
24 regulators {
25 BUCK1 {
26 regulator-name = "buck1";
27 regulator-min-microvolt = < 600000>;
28 regulator-max-microvolt = <1393750>;
29 regulator-min-microamp = < 220000>;
30 regulator-max-microamp = <7040000>;
31 };
32
33 BUCK2 {
34 regulator-name = "buck2";
35 regulator-min-microvolt = < 600000>;
36 regulator-max-microvolt = <1393750>;
37 regulator-min-microamp = <1496000>;
38 regulator-max-microamp = <4189000>;
39 };
40
41 BUCK3 {
42 regulator-name = "buck3";
43 regulator-min-microvolt = <1400000>;
44 regulator-max-microvolt = <2193750>;
45 regulator-min-microamp = <1496000>;
46 regulator-max-microamp = <4189000>;
47 };
48 };
49 };
This page took 0.050032 seconds and 5 git commands to generate.