Merge branch 'omap-for-v4.8/legacy' into for-next
[deliverable/linux.git] / Documentation / devicetree / bindings / serial / brcm,bcm6345-uart.txt
1 * BCM63xx UART
2
3 Required properties:
4
5 - compatible: "brcm,bcm6345-uart"
6
7 - reg: The base address of the UART register bank.
8
9 - interrupts: A single interrupt specifier.
10
11 - clocks: Clock driving the hardware; used to figure out the baud rate
12 divisor.
13
14 Example:
15
16 uart0: serial@14e00520 {
17 compatible = "brcm,bcm6345-uart";
18 reg = <0x14e00520 0x18>;
19 interrupt-parent = <&periph_intc>;
20 interrupts = <2>;
21 clocks = <&periph_clk>;
22 };
23
24 clocks {
25 periph_clk: periph_clk@0 {
26 compatible = "fixed-clock";
27 #clock-cells = <0>;
28 clock-frequency = <54000000>;
29 };
30 };
This page took 0.037691 seconds and 5 git commands to generate.