Documentation/devicetree/bindings/serial/of-serial.txt

   1 * UART (Universal Asynchronous Receiver/Transmitter)
   2
   3 Required properties:
   4 - compatible : one of:
   5         - "ns8250"
   6         - "ns16450"
   7         - "ns16550a"
   8         - "ns16550"
   9         - "ns16750"
  10         - "ns16850"
  11         - For Tegra20, must contain "nvidia,tegra20-uart"
  12         - For other Tegra, must contain '"nvidia,<chip>-uart",
  13           "nvidia,tegra20-uart"' where <chip> is tegra30, tegra114, tegra124,
  14           tegra132, or tegra210.
  15         - "nxp,lpc3220-uart"
  16         - "ralink,rt2880-uart"
  17         - "ibm,qpace-nwp-serial"
  18         - "altr,16550-FIFO32"
  19         - "altr,16550-FIFO64"
  20         - "altr,16550-FIFO128"
  21         - "fsl,16550-FIFO64"
  22         - "serial" if the port type is unknown.
  23 - reg : offset and length of the register set for the device.
  24 - interrupts : should contain uart interrupt.
  25 - clock-frequency : the input clock frequency for the UART
  26          or
  27   clocks phandle to refer to the clk used as per Documentation/devicetree
  28   /bindings/clock/clock-bindings.txt
  29
  30 Optional properties:
  31 - current-speed : the current active speed of the UART.
  32 - reg-offset : offset to apply to the mapbase from the start of the registers.
  33 - reg-shift : quantity to shift the register offsets by.
  34 - reg-io-width : the size (in bytes) of the IO accesses that should be
  35   performed on the device.  There are some systems that require 32-bit
  36   accesses to the UART (e.g. TI davinci).
  37 - used-by-rtas : set to indicate that the port is in use by the OpenFirmware
  38   RTAS and should not be registered.
  39 - no-loopback-test: set to indicate that the port does not implements loopback
  40   test mode
  41 - fifo-size: the fifo size of the UART.
  42 - auto-flow-control: one way to enable automatic flow control support. The
  43   driver is allowed to detect support for the capability even without this
  44   property.
  45
  46 Example:
  47
  48         uart@80230000 {
  49                 compatible = "ns8250";
  50                 reg = <0x80230000 0x100>;
  51                 clock-frequency = <3686400>;
  52                 interrupts = <10>;
  53                 reg-shift = <2>;
  54         };