Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt

   1 * Synopsys DesignWare ABP UART
   2
   3 Required properties:
   4 - compatible : "snps,dw-apb-uart"
   5 - reg : offset and length of the register set for the device.
   6 - interrupts : should contain uart interrupt.
   7
   8 Clock handling:
   9 The clock rate of the input clock needs to be supplied by one of
  10 - clock-frequency : the input clock frequency for the UART.
  11 - clocks : phandle to the input clock
  12
  13 The supplying peripheral clock can also be handled, needing a second property
  14 - clock-names: tuple listing input clock names.
  15         Required elements: "baudclk", "apb_pclk"
  16
  17 Optional properties:
  18 - resets : phandle to the parent reset controller.
  19 - reg-shift : quantity to shift the register offsets by.  If this property is
  20   not present then the register offsets are not shifted.
  21 - reg-io-width : the size (in bytes) of the IO accesses that should be
  22   performed on the device.  If this property is not present then single byte
  23   accesses are used.
  24
  25 Example:
  26
  27         uart@80230000 {
  28                 compatible = "snps,dw-apb-uart";
  29                 reg = <0x80230000 0x100>;
  30                 clock-frequency = <3686400>;
  31                 interrupts = <10>;
  32                 reg-shift = <2>;
  33                 reg-io-width = <4>;
  34         };
  35
  36 Example with one clock:
  37
  38         uart@80230000 {
  39                 compatible = "snps,dw-apb-uart";
  40                 reg = <0x80230000 0x100>;
  41                 clocks = <&baudclk>;
  42                 interrupts = <10>;
  43                 reg-shift = <2>;
  44                 reg-io-width = <4>;
  45         };
  46
  47 Example with two clocks:
  48
  49         uart@80230000 {
  50                 compatible = "snps,dw-apb-uart";
  51                 reg = <0x80230000 0x100>;
  52                 clocks = <&baudclk>, <&apb_pclk>;
  53                 clock-names = "baudclk", "apb_pclk";
  54                 interrupts = <10>;
  55                 reg-shift = <2>;
  56                 reg-io-width = <4>;
  57         };