Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt

   1 BROADCOM Cygnus Audio I2S/TDM/SPDIF controller
   2
   3 Required properties:
   4         - compatible : "brcm,cygnus-audio"
   5         - #address-cells: 32bit valued, 1 cell.
   6         - #size-cells:  32bit valued, 0 cell.
   7         - reg : Should contain audio registers location and length
   8         - reg-names: names of the registers listed in "reg" property
   9                 Valid names are "aud" and "i2s_in". "aud" contains a
  10                 set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains
  11                 a set of I2S_IN registers.
  12         - clocks: PLL and leaf clocks used by audio ports
  13         - assigned-clocks: PLL and leaf clocks
  14         - assigned-clock-parents: parent clocks of the assigned clocks
  15                 (usually the PLL)
  16         - assigned-clock-rates: List of clock frequencies of the
  17                 assigned clocks
  18         - clock-names: names of 3 leaf clocks used by audio ports
  19                 Valid names are "ch0_audio", "ch1_audio", "ch2_audio"
  20         - interrupts: audio DMA interrupt number
  21
  22 SSP Subnode properties:
  23 - reg: The index of ssp port interface to use
  24         Valid value are 0, 1, 2, or 3 (for spdif)
  25
  26 Example:
  27         cygnus_audio: audio@180ae000 {
  28                 compatible = "brcm,cygnus-audio";
  29                 #address-cells = <1>;
  30                 #size-cells = <0>;
  31                 reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>;
  32                 reg-names = "aud", "i2s_in";
  33                 clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>,
  34                                 <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>,
  35                                 <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
  36                 assigned-clocks = <&audiopll BCM_CYGNUS_AUDIOPLL>,
  37                                                         <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>,
  38                                                         <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>,
  39                                                         <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
  40                 assigned-clock-parents = <&audiopll BCM_CYGNUS_AUDIOPLL>;
  41                 assigned-clock-rates = <1769470191>,
  42                                                                 <0>,
  43                                                                 <0>,
  44                                                                 <0>;
  45                 clock-names = "ch0_audio", "ch1_audio", "ch2_audio";
  46                 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
  47
  48                 ssp0: ssp_port@0 {
  49                         reg = <0>;
  50                         status = "okay";
  51                 };
  52
  53                 ssp1: ssp_port@1 {
  54                         reg = <1>;
  55                         status = "disabled";
  56                 };
  57
  58                 ssp2: ssp_port@2 {
  59                         reg = <2>;
  60                         status = "disabled";
  61                 };
  62
  63                 spdif: spdif_port@3 {
  64                         reg = <3>;
  65                         status = "disabled";
  66                 };
  67         };