Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/arizona', 'asoc/topic...
[deliverable/linux.git] / Documentation / devicetree / bindings / sound / da7219.txt
1 Dialog Semiconductor DA7219 Audio Codec bindings
2
3 DA7219 is an audio codec with advanced accessory detect features.
4
5 ======
6
7 Required properties:
8 - compatible : Should be "dlg,da7219"
9 - reg: Specifies the I2C slave address
10
11 - interrupt-parent : Specifies the phandle of the interrupt controller to which
12 the IRQs from DA7219 are delivered to.
13 - interrupts : IRQ line info for DA7219.
14 (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
15 further information relating to interrupt properties)
16
17 - VDD-supply: VDD power supply for the device
18 - VDDMIC-supply: VDDMIC power supply for the device
19 - VDDIO-supply: VDDIO power supply for the device
20 (See Documentation/devicetree/bindings/regulator/regulator.txt for further
21 information relating to regulators)
22
23 Optional properties:
24 - interrupt-names : Name associated with interrupt line. Should be "wakeup" if
25 interrupt is to be used to wake system, otherwise "irq" should be used.
26 - wakeup-source: Flag to indicate this device can wake system (suspend/resume).
27
28 - clocks : phandle and clock specifier for codec MCLK.
29 - clock-names : Clock name string for 'clocks' attribute, should be "mclk".
30
31 - dlg,micbias-lvl : Voltage (mV) for Mic Bias
32 [<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
33 - dlg,mic-amp-in-sel : Mic input source type
34 ["diff", "se_p", "se_n"]
35
36 Deprecated properties:
37 - dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
38 (LDO unavailable in production HW so property no longer required).
39
40 ======
41
42 Child node - 'da7219_aad':
43
44 Optional properties:
45 - dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
46 [<2800>, <2900>]
47 - dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
48 - dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
49 [<2>, <5>, <10>, <50>, <100>, <200>, <500>]
50 - dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
51 [<200>, <500>, <750>, <1000>]
52 - dlg,jack-ins-deb : Debounce time for jack insertion (ms)
53 [<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>]
54 - dlg,jack-det-rate: Jack type detection latency (3/4 pole)
55 ["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"]
56 - dlg,jack-rem-deb : Debounce time for jack removal (ms)
57 [<1>, <5>, <10>, <20>]
58 - dlg,a-d-btn-thr : Impedance threshold between buttons A and D
59 [0x0 - 0xFF]
60 - dlg,d-b-btn-thr : Impedance threshold between buttons D and B
61 [0x0 - 0xFF]
62 - dlg,b-c-btn-thr : Impedance threshold between buttons B and C
63 [0x0 - 0xFF]
64 - dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
65 [0x0 - 0xFF]
66 - dlg,btn-avg : Number of 8-bit readings for averaged button measurement
67 [<1>, <2>, <4>, <8>]
68 - dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
69 [<1>, <2>, <4>, <8>]
70
71 ======
72
73 Example:
74
75 codec: da7219@1a {
76 compatible = "dlg,da7219";
77 reg = <0x1a>;
78
79 interrupt-parent = <&gpio6>;
80 interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
81
82 VDD-supply = <&reg_audio>;
83 VDDMIC-supply = <&reg_audio>;
84 VDDIO-supply = <&reg_audio>;
85
86 clocks = <&clks 201>;
87 clock-names = "mclk";
88
89 dlg,ldo-lvl = <1200>;
90 dlg,micbias-lvl = <2600>;
91 dlg,mic-amp-in-sel = "diff";
92
93 da7219_aad {
94 dlg,btn-cfg = <50>;
95 dlg,mic-det-thr = <500>;
96 dlg,jack-ins-deb = <20>;
97 dlg,jack-det-rate = "32ms_64ms";
98 dlg,jack-rem-deb = <1>;
99
100 dlg,a-d-btn-thr = <0xa>;
101 dlg,d-b-btn-thr = <0x16>;
102 dlg,b-c-btn-thr = <0x21>;
103 dlg,c-mic-btn-thr = <0x3E>;
104
105 dlg,btn-avg = <4>;
106 dlg,adc-1bit-rpt = <1>;
107 };
108 };
This page took 0.049549 seconds and 5 git commands to generate.