Makefile.in

   1 #
   2 # Makefile for directory with subdirs to build.
   3 #   Copyright (C) 1990, 91, 92, 93, 94, 95, 96, 1997 Free Software Foundation
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  18 #
  19
  20 srcdir = .
  21
  22 prefix = /usr/local
  23 exec_prefix = $(prefix)
  24
  25 bindir=${exec_prefix}/bin
  26 sbindir=${exec_prefix}/sbin
  27 libexecdir=${exec_prefix}/libexec
  28 datadir=${prefix}/share
  29 sysconfdir=${prefix}/etc
  30 sharedstatedir=${prefix}/com
  31 localstatedir=${prefix}/var
  32 libdir=${exec_prefix}/lib
  33 includedir=${prefix}/include
  34 oldincludedir=/usr/include
  35 infodir=${prefix}/info
  36 mandir=${prefix}/man
  37
  38 tooldir = $(exec_prefix)/$(target)
  39
  40 program_transform_name =
  41
  42 man1dir = $(mandir)/man1
  43 man2dir = $(mandir)/man2
  44 man3dir = $(mandir)/man3
  45 man4dir = $(mandir)/man4
  46 man5dir = $(mandir)/man5
  47 man6dir = $(mandir)/man6
  48 man7dir = $(mandir)/man7
  49 man8dir = $(mandir)/man8
  50 man9dir = $(mandir)/man9
  51 GDB_NLM_DEPS =
  52
  53 SHELL = /bin/sh
  54
  55 # INSTALL_PROGRAM_ARGS is changed by configure.in to use -x for a
  56 # cygwin32 host.
  57 INSTALL_PROGRAM_ARGS =
  58
  59 INSTALL = $(SHELL) $$s/install-sh -c
  60 INSTALL_PROGRAM = $(INSTALL) $(INSTALL_PROGRAM_ARGS)
  61 INSTALL_SCRIPT = $(INSTALL)
  62 INSTALL_DATA = $(INSTALL) -m 644
  63
  64 INSTALL_DOSREL = install-dosrel-fake
  65
  66 AS = as
  67 AR = ar
  68 AR_FLAGS = rc
  69 CC = cc
  70
  71 # Special variables passed down in EXTRA_GCC_FLAGS.  They are defined
  72 # here so that they can be overridden by Makefile fragments.
  73 HOST_CC = $(CC_FOR_BUILD)
  74 HOST_PREFIX =
  75 HOST_PREFIX_1 = loser-
  76
  77 # These flag values are normally overridden by the configure script.
  78 CFLAGS = -g
  79 CXXFLAGS = -g -O2
  80
  81 LIBCFLAGS = $(CFLAGS)
  82 CFLAGS_FOR_TARGET = $(CFLAGS)
  83 LDFLAGS_FOR_TARGET =
  84 LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
  85 PICFLAG =
  86 PICFLAG_FOR_TARGET =
  87
  88 # start-sanitize-chill
  89 CHILLFLAGS = $(CFLAGS)
  90 CHILL_LIB = -lchill
  91 # end-sanitize-chill
  92 CXX = c++
  93
  94 # Use -O2 to stress test the compiler.
  95 LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
  96 CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
  97 LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
  98
  99 RANLIB = ranlib
 100
 101 DLLTOOL = dlltool
 102 WINDRES = windres
 103
 104 NM = nm
 105
 106 LD = ld
 107
 108 # Not plain GZIP, since gzip looks there for extra command-line options.
 109 GZIPPROG = gzip
 110
 111 # These values are substituted by configure.
 112 DEFAULT_YACC = yacc
 113 DEFAULT_LEX = lex
 114
 115 BISON = `if [ -f $$r/bison/bison ] ; then \
 116             echo $$r/bison/bison -L $$s/bison/ ; \
 117          else \
 118             echo bison ; \
 119          fi`
 120
 121 YACC = `if [ -f $$r/bison/bison ] ; then \
 122             echo $$r/bison/bison -y -L $$s/bison/ ; \
 123         elif [ -f $$r/byacc/byacc ] ; then \
 124             echo $$r/byacc/byacc ; \
 125         else \
 126             echo ${DEFAULT_YACC} ; \
 127         fi`
 128
 129 LEX = `if [ -f $$r/flex/flex ] ; \
 130         then echo $$r/flex/flex ; \
 131         else echo ${DEFAULT_LEX} ; fi`
 132
 133 M4 = `if [ -f $$r/m4/m4 ] ; \
 134         then echo $$r/m4/m4 ; \
 135         else echo m4 ; fi`
 136
 137 MAKEINFO = `if [ -f $$r/texinfo/makeinfo/Makefile ] ; \
 138         then echo $$r/texinfo/makeinfo/makeinfo ; \
 139         else echo makeinfo ; fi`
 140
 141 # This just becomes part of the MAKEINFO definition passed down to
 142 # sub-makes.  It lets flags be given on the command line while still
 143 # using the makeinfo from the object tree.
 144 MAKEINFOFLAGS =
 145
 146 EXPECT = `if [ -f $$r/expect/expect ] ; \
 147         then echo $$r/expect/expect ; \
 148         else echo expect ; fi`
 149
 150 RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
 151         then echo $$s/dejagnu/runtest ; \
 152         else echo runtest ; fi`
 153
 154
 155 # compilers to use to create programs which must be run in the build
 156 # environment.
 157 CC_FOR_BUILD = $(CC)
 158 CXX_FOR_BUILD = $(CXX)
 159
 160 SUBDIRS = "this is set via configure, don't edit this"
 161 OTHERS =
 162
 163 # This is set by the configure script to the list of directories which
 164 # should be built using the target tools.
 165 TARGET_CONFIGDIRS = libiberty libgloss newlib libio librx libstdc++ libg++ winsup opcodes cygmon
 166
 167 # Target libraries are put under this directory:
 168 # Changed by configure to $(target_alias) if cross.
 169 TARGET_SUBDIR = .
 170
 171 # This is set by the configure script to the arguments passed to configure.
 172 CONFIG_ARGUMENTS =
 173
 174 # This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
 175 # was used.
 176 SET_LIB_PATH =
 177
 178 # This is the name of the environment variable used for the path to
 179 # the libraries.  This may be changed by configure.in.
 180 RPATH_ENVVAR = LD_LIBRARY_PATH
 181
 182 # configure.in sets SET_LIB_PATH to this if --enable-shared was used.
 183 REALLY_SET_LIB_PATH = \
 184   $(RPATH_ENVVAR)=$$r/bfd:$$r/opcodes:$$$(RPATH_ENVVAR); \
 185   export $(RPATH_ENVVAR);
 186
 187 ALL = all.normal
 188 INSTALL_TARGET = installdirs \
 189         $(INSTALL_MODULES) \
 190         $(INSTALL_TARGET_MODULES) \
 191         $(INSTALL_X11_MODULES) \
 192         install-gcc \
 193         $(INSTALL_DOSREL)
 194
 195
 196 CC_FOR_TARGET = ` \
 197   if [ -f $$r/gcc/xgcc ] ; then \
 198     if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
 199       if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
 200         echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/$(TARGET_SUBDIR)/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
 201       else \
 202         echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
 203       fi; \
 204     else \
 205       echo $$r/gcc/xgcc -B$$r/gcc/; \
 206     fi; \
 207   else \
 208     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 209       echo $(CC); \
 210     else \
 211       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 212     fi; \
 213   fi`
 214
 215 # If CC_FOR_TARGET is not overriden on the command line, then this
 216 # variable is passed down to the gcc Makefile, where it is used to
 217 # build libgcc2.a.  We define it here so that it can itself be
 218 # overridden on the command line.
 219 GCC_FOR_TARGET = $$r/gcc/xgcc -B$$r/gcc/
 220
 221 # start-sanitize-chill
 222 CHILL_FOR_TARGET = ` \
 223   if [ -f $$r/gcc/xgcc ] ; then \
 224     echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
 225   else \
 226     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 227       echo $(CC); \
 228     else \
 229       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 230     fi; \
 231   fi`
 232
 233 # end-sanitize-chill
 234
 235 CXX_FOR_TARGET = ` \
 236   if [ -f $$r/gcc/xgcc ] ; then \
 237     if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
 238       if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
 239         echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
 240       else \
 241         echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
 242       fi; \
 243     else \
 244       echo $$r/gcc/xgcc -B$$r/gcc/; \
 245     fi; \
 246   else \
 247     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 248       echo $(CXX); \
 249     else \
 250       t='$(program_transform_name)'; echo c++ | sed -e 's/x/x/' $$t; \
 251     fi; \
 252   fi`
 253
 254 AS_FOR_TARGET = ` \
 255   if [ -f $$r/gas/as-new ] ; then \
 256     echo $$r/gas/as-new ; \
 257   else \
 258     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 259       echo $(AS); \
 260     else \
 261        t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
 262     fi; \
 263   fi`
 264
 265 LD_FOR_TARGET = ` \
 266   if [ -f $$r/ld/ld-new ] ; then \
 267     echo $$r/ld/ld-new ; \
 268   else \
 269     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 270       echo $(LD); \
 271     else \
 272        t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
 273     fi; \
 274   fi`
 275
 276 DLLTOOL_FOR_TARGET = ` \
 277   if [ -f $$r/binutils/dlltool ] ; then \
 278     echo $$r/binutils/dlltool ; \
 279   else \
 280     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 281       echo $(DLLTOOL); \
 282     else \
 283        t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
 284     fi; \
 285   fi`
 286
 287 WINDRES_FOR_TARGET = ` \
 288   if [ -f $$r/binutils/windres ] ; then \
 289     echo $$r/binutils/windres ; \
 290   else \
 291     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 292       echo $(WINDRES); \
 293     else \
 294        t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
 295     fi; \
 296   fi`
 297
 298 AR_FOR_TARGET = ` \
 299   if [ -f $$r/binutils/ar ] ; then \
 300     echo $$r/binutils/ar ; \
 301   else \
 302     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 303       echo $(AR); \
 304     else \
 305        t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
 306     fi; \
 307   fi`
 308
 309 RANLIB_FOR_TARGET = ` \
 310   if [ -f $$r/binutils/ranlib ] ; then \
 311     echo $$r/binutils/ranlib ; \
 312   else \
 313     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 314       echo $(RANLIB); \
 315     else \
 316        t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
 317     fi; \
 318   fi`
 319
 320 NM_FOR_TARGET = ` \
 321   if [ -f $$r/binutils/nm-new ] ; then \
 322     echo $$r/binutils/nm-new ; \
 323   else \
 324     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 325       echo $(NM); \
 326     else \
 327        t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
 328     fi; \
 329   fi`
 330
 331 #### host and target specific makefile fragments come in here.
 332 ###
 333
 334 # Flags to pass down to all sub-makes.
 335 # Please keep these in alphabetical order.
 336 BASE_FLAGS_TO_PASS = \
 337         "AR_FLAGS=$(AR_FLAGS)" \
 338         "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
 339         "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
 340         "BISON=$(BISON)" \
 341         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 342         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 343         "CFLAGS=$(CFLAGS)" \
 344         "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 345         $(start-sanitize-chill)\
 346         "CHILLFLAGS=$(CHILLFLAGS)" \
 347         "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
 348         "CHILL_LIB=$(CHILL_LIB)" \
 349         $(end-sanitize-chill)\
 350         "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
 351         "CXXFLAGS=$(CXXFLAGS)" \
 352         "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
 353         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 354         "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
 355         "INSTALL=$(INSTALL)" \
 356         "INSTALL_DATA=$(INSTALL_DATA)" \
 357         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 358         "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
 359         "LDFLAGS=$(LDFLAGS)" \
 360         "LEX=$(LEX)" \
 361         "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
 362         "LIBCFLAGS=$(LIBCFLAGS)" \
 363         "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 364         "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
 365         "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
 366         "M4=$(M4)" \
 367         "MAKE=$(MAKE)" \
 368         "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 369         "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
 370         "PICFLAG=$(PICFLAG)" \
 371         "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 372         "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
 373         "SHELL=$(SHELL)" \
 374         "EXPECT=$(EXPECT)" \
 375         "RUNTEST=$(RUNTEST)" \
 376         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 377         "WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
 378         "YACC=$(YACC)" \
 379         "bindir=$(bindir)" \
 380         "datadir=$(datadir)" \
 381         "exec_prefix=$(exec_prefix)" \
 382         "includedir=$(includedir)" \
 383         "infodir=$(infodir)" \
 384         "libdir=$(libdir)" \
 385         "libexecdir=$(libexecdir)" \
 386         "localstatedir=$(localstatedir)" \
 387         "mandir=$(mandir)" \
 388         "oldincludedir=$(oldincludedir)" \
 389         "prefix=$(prefix)" \
 390         "sbindir=$(sbindir)" \
 391         "sharedstatedir=$(sharedstatedir)" \
 392         "sysconfdir=$(sysconfdir)" \
 393         "tooldir=$(tooldir)"
 394
 395 # Flags to pass down to most sub-makes, in which we're building with
 396 # the host environment.
 397 # If any variables are added here, they must be added to do-*, below.
 398 EXTRA_HOST_FLAGS = \
 399         'AR=$(AR)' \
 400         'AS=$(AS)' \
 401         'CC=$(CC)' \
 402         'CXX=$(CXX)' \
 403         'DLLTOOL=$(DLLTOOL)' \
 404         'LD=$(LD)' \
 405         'NM=$(NM)' \
 406         'RANLIB=$(RANLIB)' \
 407         'WINDRES=$(WINDRES)'
 408
 409 FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
 410
 411 # Flags that are concerned with the location of the X11 include files
 412 # and library files
 413 #
 414 # NOTE: until the top-level is getting the values via autoconf, it only
 415 # causes problems to have this top-level Makefile overriding the autoconf-set
 416 # values in child directories.  Only variables that don't conflict with
 417 # autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
 418 #
 419 X11_FLAGS_TO_PASS = \
 420         'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
 421         'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
 422
 423 # Flags to pass down to makes which are built with the target environment.
 424 # The double $ decreases the length of the command line; the variables
 425 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
 426 # If any variables are added here, they must be added to do-*, below.
 427 EXTRA_TARGET_FLAGS = \
 428         'AR=$$(AR_FOR_TARGET)' \
 429         'AS=$$(AS_FOR_TARGET)' \
 430         'CC=$$(CC_FOR_TARGET)' \
 431         'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
 432         'CXX=$$(CXX_FOR_TARGET)' \
 433         'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
 434         'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
 435         'LD=$$(LD_FOR_TARGET)' \
 436         'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
 437         'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
 438         'NM=$$(NM_FOR_TARGET)' \
 439         'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
 440         'RANLIB=$$(RANLIB_FOR_TARGET)' \
 441         'WINDRES=$$(WINDRES_FOR_TARGET)'
 442
 443 TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
 444
 445 # Flags to pass down to gcc.  gcc builds a library, libgcc.a, so it
 446 # unfortunately needs the native compiler and the target ar and
 447 # ranlib.
 448 # If any variables are added here, they must be added to do-*, below.
 449 # The HOST_* variables are a special case, which are used for the gcc
 450 # cross-building scheme.
 451 EXTRA_GCC_FLAGS = \
 452         'AR=$$(AR_FOR_TARGET)' \
 453         'AS=$(AS)' \
 454         'CC=$(CC)' \
 455         'CXX=$(CXX)' \
 456         'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
 457         'HOST_CC=$(CC_FOR_BUILD)' \
 458         'HOST_PREFIX=$(HOST_PREFIX)' \
 459         'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
 460         'NM=$(NM)' \
 461         'RANLIB=$$(RANLIB_FOR_TARGET)' \
 462         'WINDRES=$$(WINDRES_FOR_TARGET)' \
 463         "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
 464         "`if test x'$(LANGUAGES)' != x; then echo 'LANGUAGES=$(LANGUAGES)'; else echo 'XFOO=bar'; fi`" \
 465         "`if test x'$(STMP_FIXPROTO)' != x; then echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)'; else echo 'XFOO=bar'; fi`" \
 466         "`if test x'$(LIMITS_H_TEST)' != x; then echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)'; else echo 'XFOO=bar'; fi`" \
 467         "`if test x'$(LIBGCC1_TEST)' != x; then echo 'LIBGCC1_TEST=$(LIBGCC1_TEST)'; else echo 'XFOO=bar'; fi`" \
 468         "`if test x'$(LIBGCC2_CFLAGS)' != x; then echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)'; else echo 'XFOO=bar'; fi`" \
 469         "`if test x'$(LIBGCC2_DEBUG_CFLAGS)' != x; then echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)'; else echo 'XFOO=bar'; fi`" \
 470         "`if test x'$(LIBGCC2_INCLUDES)' != x; then echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)'; else echo 'XFOO=bar'; fi`" \
 471         "`if test x'$(ENQUIRE)' != x; then echo 'ENQUIRE=$(ENQUIRE)'; else echo 'XFOO=bar'; fi`" \
 472         "`if test x'$(BOOT_CFLAGS)' != x; then echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)'; else echo 'XFOO=bar'; fi`"
 473
 474 GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
 475
 476 # This is a list of the targets for all of the modules which are compiled
 477 # using $(FLAGS_TO_PASS).
 478 ALL_MODULES = \
 479         all-apache \
 480         all-autoconf \
 481         all-automake \
 482         all-bash \
 483         all-bfd \
 484         all-binutils \
 485         all-bison \
 486         all-byacc \
 487         all-cvs \
 488         all-db \
 489         all-dejagnu \
 490         all-diff \
 491         all-dosutils \
 492         all-etc \
 493         all-fileutils \
 494         all-findutils \
 495         all-find \
 496         all-flex \
 497         all-gas \
 498         all-gawk \
 499         all-gnuserv \
 500         all-gprof \
 501         all-grep \
 502         all-grez \
 503         all-gzip \
 504         all-hello \
 505         $(start-sanitize-ide) \
 506         all-ilu \
 507         $(end-sanitize-ide) \
 508         all-indent \
 509         all-inet \
 510         all-ispell \
 511         all-itcl \
 512         $(start-sanitize-ide) \
 513         all-jstools \
 514         $(end-sanitize-ide) \
 515         all-ld \
 516         all-libiberty \
 517         $(start-sanitize-ide) \
 518         all-libide \
 519         $(end-sanitize-ide) \
 520         all-m4 \
 521         all-make \
 522         all-mmalloc \
 523         all-opcodes \
 524         all-patch \
 525         all-perl \
 526         all-prms \
 527         all-rcs \
 528         all-readline \
 529         all-release \
 530         all-recode \
 531         all-sed \
 532         all-send-pr \
 533         all-shellutils \
 534         all-sim \
 535         all-sn \
 536         all-tar \
 537         all-tcl \
 538         all-texinfo \
 539         all-textutils \
 540         all-tgas \
 541         all-time \
 542         all-uudecode \
 543         $(start-sanitize-ide) \
 544         all-vmake \
 545         $(end-sanitize-ide) \
 546         all-wdiff
 547
 548 # This is a list of the check targets for all of the modules which are
 549 # compiled using $(FLAGS_TO_PASS).
 550 #
 551 # The list is in two parts.  The first lists those tools which
 552 # are tested as part of the host's native tool-chain, and not
 553 # tested in a cross configuration.
 554 NATIVE_CHECK_MODULES = \
 555         check-bison \
 556         check-byacc \
 557         check-flex
 558
 559 CROSS_CHECK_MODULES = \
 560         check-apache \
 561         check-autoconf \
 562         check-automake \
 563         check-bash \
 564         check-bfd \
 565         check-binutils \
 566         check-cvs \
 567         check-db \
 568         check-dejagnu \
 569         check-diff \
 570         check-etc \
 571         check-fileutils \
 572         check-findutils \
 573         check-find \
 574         check-gas \
 575         check-gawk \
 576         check-gnuserv \
 577         check-gprof \
 578         check-grep \
 579         check-gzip \
 580         check-hello \
 581         $(start-sanitize-ide) \
 582         check-ilu \
 583         $(end-sanitize-ide) \
 584         check-indent \
 585         check-inet \
 586         check-ispell \
 587         check-itcl \
 588         $(start-sanitize-ide) \
 589         check-jstools \
 590         $(end-sanitize-ide) \
 591         check-ld \
 592         check-libiberty \
 593         $(start-sanitize-ide) \
 594         check-libide \
 595         $(end-sanitize-ide) \
 596         check-m4 \
 597         check-make \
 598         check-mmcheckoc \
 599         check-opcodes \
 600         check-patch \
 601         check-perl \
 602         check-prms \
 603         check-rcs \
 604         check-readline \
 605         check-recode \
 606         check-sed \
 607         check-send-pr \
 608         check-shellutils \
 609         check-sn \
 610         check-sim \
 611         check-tar \
 612         check-tcl \
 613         check-texinfo \
 614         check-textutils \
 615         check-tgas \
 616         check-time \
 617         check-uudecode \
 618         $(start-sanitize-ide) \
 619         check-vmake \
 620         $(end-sanitize-ide) \
 621         check-wdiff
 622
 623 CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 624
 625 # This is a list of the install targets for all of the modules which are
 626 # compiled using $(FLAGS_TO_PASS).
 627 # We put install-opcodes before install-binutils because the installed
 628 # binutils might be on PATH, and they might need the shared opcodes
 629 # library.
 630 INSTALL_MODULES = \
 631         install-apache \
 632         install-autoconf \
 633         install-automake \
 634         install-bash \
 635         install-bfd \
 636         install-opcodes \
 637         install-binutils \
 638         install-bison \
 639         install-byacc \
 640         install-cvs \
 641         install-db \
 642         install-dejagnu \
 643         install-diff \
 644         install-dosutils \
 645         install-etc \
 646         install-fileutils \
 647         install-findutils \
 648         install-find \
 649         install-flex \
 650         install-gas \
 651         install-gawk \
 652         install-gnuserv \
 653         install-gprof \
 654         install-grep \
 655         install-grez \
 656         install-gzip \
 657         install-hello \
 658         $(start-sanitize-ide) \
 659         install-ilu \
 660         $(end-sanitize-ide) \
 661         install-indent \
 662         install-inet \
 663         install-ispell \
 664         install-itcl \
 665         $(start-sanitize-ide) \
 666         install-jstools \
 667         $(end-sanitize-ide) \
 668         install-ld \
 669         install-libiberty \
 670         $(start-sanitize-ide) \
 671         install-libide \
 672         $(end-sanitize-ide) \
 673         install-m4 \
 674         install-make \
 675         install-mmalloc \
 676         install-patch \
 677         install-perl \
 678         install-prms \
 679         install-rcs \
 680         install-readline \
 681         install-recode \
 682         install-sed \
 683         install-send-pr \
 684         install-shellutils \
 685         install-sim \
 686         install-sn \
 687         install-tar \
 688         install-tcl \
 689         install-texinfo \
 690         install-textutils \
 691         install-tgas \
 692         install-time \
 693         install-uudecode \
 694         $(start-sanitize-ide) \
 695         install-vmake \
 696         $(end-sanitize-ide) \
 697         install-wdiff
 698
 699 # This is a list of the targets for all of the modules which are compiled
 700 # using $(X11_FLAGS_TO_PASS).
 701 ALL_X11_MODULES = \
 702         all-emacs \
 703         all-emacs19 \
 704         all-gdb \
 705         all-expect \
 706         all-gash \
 707         all-guile \
 708         all-tclX \
 709         all-tk \
 710         all-tix
 711
 712 # This is a list of the check targets for all of the modules which are
 713 # compiled using $(X11_FLAGS_TO_PASS).
 714 CHECK_X11_MODULES = \
 715         check-emacs \
 716         check-gdb \
 717         check-guile \
 718         check-expect \
 719         check-gash \
 720         check-tclX \
 721         check-tk \
 722         check-tix
 723
 724 # This is a list of the install targets for all the modules which are
 725 # compiled using $(X11_FLAGS_TO_PASS).
 726 INSTALL_X11_MODULES = \
 727         install-emacs \
 728         install-emacs19 \
 729         install-gdb \
 730         install-guile \
 731         install-expect \
 732         install-gash \
 733         install-tclX \
 734         install-tk \
 735         install-tix
 736
 737 # This is a list of the targets for all of the modules which are compiled
 738 # using $(TARGET_FLAGS_TO_PASS).
 739 ALL_TARGET_MODULES = \
 740         all-target-libio \
 741         all-target-libstdc++ \
 742         all-target-librx \
 743         all-target-libg++ \
 744         all-target-newlib \
 745         all-target-winsup \
 746         all-target-libgloss \
 747         all-target-libiberty \
 748         all-target-gperf \
 749         all-target-examples \
 750         all-target-cygmon
 751
 752 # This is a list of the configure targets for all of the modules which
 753 # are compiled using the target tools.
 754 CONFIGURE_TARGET_MODULES = \
 755         configure-target-libio \
 756         configure-target-libstdc++ \
 757         configure-target-librx \
 758         configure-target-libg++ \
 759         configure-target-newlib \
 760         configure-target-winsup \
 761         configure-target-libgloss \
 762         configure-target-libiberty \
 763         configure-target-gperf \
 764         configure-target-examples \
 765         configure-target-cygmon
 766
 767 # This is a list of the check targets for all of the modules which are
 768 # compiled using $(TARGET_FLAGS_TO_PASS).
 769 CHECK_TARGET_MODULES = \
 770         check-target-libio \
 771         check-target-libstdc++ \
 772         check-target-libg++ \
 773         check-target-newlib \
 774         check-target-winsup \
 775         check-target-libiberty \
 776         check-target-gperf
 777
 778 # This is a list of the install targets for all of the modules which are
 779 # compiled using $(TARGET_FLAGS_TO_PASS).
 780 INSTALL_TARGET_MODULES = \
 781         install-target-libio \
 782         install-target-libstdc++ \
 783         install-target-libg++ \
 784         install-target-newlib \
 785         install-target-winsup \
 786         install-target-libgloss \
 787         install-target-libiberty \
 788         install-target-gperf
 789
 790 # This is a list of the targets for which we can do a clean-{target}.
 791 CLEAN_MODULES = \
 792         clean-apache \
 793         clean-autoconf \
 794         clean-automake \
 795         clean-bash \
 796         clean-bfd \
 797         clean-binutils \
 798         clean-bison \
 799         clean-byacc \
 800         clean-cvs \
 801         clean-db \
 802         clean-dejagnu \
 803         clean-diff \
 804         clean-dosutils \
 805         clean-etc \
 806         clean-fileutils \
 807         clean-findutils \
 808         clean-find \
 809         clean-flex \
 810         clean-gas \
 811         clean-gawk \
 812         clean-gnuserv \
 813         clean-gprof \
 814         clean-grep \
 815         clean-grez \
 816         clean-gzip \
 817         clean-hello \
 818         $(start-sanitize-ide) \
 819         clean-ilu \
 820         $(end-sanitize-ide) \
 821         clean-indent \
 822         clean-inet \
 823         clean-ispell \
 824         clean-itcl \
 825         $(start-sanitize-ide) \
 826         clean-jstools \
 827         $(end-sanitize-ide) \
 828         clean-ld \
 829         clean-libiberty \
 830         $(start-sanitize-ide) \
 831         clean-libide \
 832         $(end-sanitize-ide) \
 833         clean-m4 \
 834         clean-make \
 835         clean-mmalloc \
 836         clean-opcodes \
 837         clean-patch \
 838         clean-perl \
 839         clean-prms \
 840         clean-rcs \
 841         clean-readline \
 842         clean-release \
 843         clean-recode \
 844         clean-sed \
 845         clean-send-pr \
 846         clean-shellutils \
 847         clean-sim \
 848         clean-sn \
 849         clean-tar \
 850         clean-tcl \
 851         clean-texinfo \
 852         clean-textutils \
 853         clean-tgas \
 854         clean-time \
 855         clean-uudecode \
 856         $(start-sanitize-ide) \
 857         clean-vmake \
 858         $(end-sanitize-ide) \
 859         clean-wdiff
 860
 861 # All of the target modules that can be cleaned
 862 CLEAN_TARGET_MODULES = \
 863         clean-target-libio \
 864         clean-target-libstdc++ \
 865         clean-target-librx \
 866         clean-target-libg++ \
 867         clean-target-newlib \
 868         clean-target-winsup \
 869         clean-target-libgloss \
 870         clean-target-libiberty \
 871         clean-target-gperf \
 872         clean-target-examples \
 873         clean-target-cygmon
 874
 875 # All of the x11 modules that can be cleaned
 876 CLEAN_X11_MODULES = \
 877         clean-emacs \
 878         clean-emacs19 \
 879         clean-gdb \
 880         clean-expect \
 881         clean-gash \
 882         clean-guile \
 883         clean-tclX \
 884         clean-tk \
 885         clean-tix
 886
 887 # The first rule in the file had better be this one.  Don't put any above it.
 888 all: all.normal
 889 .PHONY: all
 890
 891 # The target built for a native build.
 892 .PHONY: all.normal
 893 all.normal: \
 894         $(ALL_MODULES) \
 895         $(ALL_X11_MODULES) \
 896         $(ALL_TARGET_MODULES) \
 897         all-gcc
 898
 899 # Do a target for all the subdirectories.  A ``make do-X'' will do a
 900 # ``make X'' in all subdirectories (because, in general, there is a
 901 # dependency (below) of X upon do-X, a ``make X'' will also do this,
 902 # but it may do additional work as well).
 903 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
 904 # because it is so large that it can easily overflow the command line
 905 # length limit on some systems.
 906 DO_X = \
 907         do-clean \
 908         do-distclean \
 909         do-dvi \
 910         do-info \
 911         do-install-info \
 912         do-installcheck \
 913         do-mostlyclean \
 914         do-maintainer-clean \
 915         do-TAGS
 916 .PHONY: $(DO_X)
 917 $(DO_X):
 918         @target=`echo $@ | sed -e 's/^do-//'`; \
 919         r=`pwd`; export r; \
 920         s=`cd $(srcdir); pwd`; export s; \
 921         $(SET_LIB_PATH) \
 922         for i in $(SUBDIRS) -dummy-; do \
 923           if [ -f ./$$i/Makefile ]; then \
 924             case $$i in \
 925             gcc) \
 926               for flag in $(EXTRA_GCC_FLAGS); do \
 927                 eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
 928               done; \
 929               ;; \
 930             *) \
 931               for flag in $(EXTRA_HOST_FLAGS); do \
 932                 eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
 933               done; \
 934               ;; \
 935             esac ; \
 936             export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
 937             if (cd ./$$i; \
 938                 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 939                         "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
 940                         "RANLIB=$${RANLIB}" \
 941                         "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
 942                         $${target}); \
 943             then true; else exit 1; fi; \
 944           else true; fi; \
 945         done
 946         @target=`echo $@ | sed -e 's/^do-//'`; \
 947         r=`pwd`; export r; \
 948         s=`cd $(srcdir); pwd`; export s; \
 949         $(SET_LIB_PATH) \
 950         for i in $(TARGET_CONFIGDIRS) -dummy-; do \
 951           if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
 952             for flag in $(EXTRA_TARGET_FLAGS); do \
 953                 eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
 954             done; \
 955             export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
 956             if (cd $(TARGET_SUBDIR)/$$i; \
 957                 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 958                         "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
 959                         "RANLIB=$${RANLIB}" \
 960                         "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
 961                         $${target}); \
 962             then true; else exit 1; fi; \
 963           else true; fi; \
 964         done
 965
 966 # Here are the targets which correspond to the do-X targets.
 967
 968 .PHONY: info installcheck dvi install-info
 969 .PHONY: clean distclean mostlyclean maintainer-clean realclean
 970 .PHONY: local-clean local-distclean local-maintainer-clean
 971 info: do-info
 972 installcheck: do-installcheck
 973 dvi: do-dvi
 974
 975 # Make sure makeinfo is built before we do a `make info'.
 976 do-info: all-texinfo
 977
 978 install-info: do-install-info dir.info
 979         s=`cd $(srcdir); pwd`; export s; \
 980         if [ -f dir.info ] ; then \
 981           $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
 982         else true ; fi
 983
 984 local-clean:
 985         -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
 986
 987 local-distclean:
 988         -rm -f Makefile config.status config.cache
 989         -if [ "$(TARGET_SUBDIR)" != "." ]; then \
 990           rm -rf $(TARGET_SUBDIR); \
 991         else true; fi
 992
 993 local-maintainer-clean:
 994         @echo "This command is intended for maintainers to use;"
 995         @echo "it deletes files that may require special tools to rebuild."
 996
 997 clean: do-clean local-clean
 998 mostlyclean: do-mostlyclean local-clean
 999 distclean: do-distclean local-clean local-distclean
1000 maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
1001 maintainer-clean: local-distclean
1002 realclean: maintainer-clean
1003
1004 # This rule is used to clean specific modules.
1005 .PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
1006 $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
1007         @dir=`echo $@ | sed -e 's/clean-//'`; \
1008         if [ -f ./$${dir}/Makefile ] ; then \
1009           r=`pwd`; export r; \
1010           s=`cd $(srcdir); pwd`; export s; \
1011           $(SET_LIB_PATH) \
1012           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
1013         else \
1014           true; \
1015         fi
1016
1017 .PHONY: $(CLEAN_TARGET_MODULES)
1018 $(CLEAN_TARGET_MODULES):
1019         @dir=`echo $@ | sed -e 's/clean-target-//'`; \
1020         rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
1021         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1022           r=`pwd`; export r; \
1023           s=`cd $(srcdir); pwd`; export s; \
1024           $(SET_LIB_PATH) \
1025           (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
1026         else \
1027           true; \
1028         fi
1029
1030 clean-target: $(CLEAN_TARGET_MODULES)
1031
1032 # Check target.
1033
1034 .PHONY: check
1035 check: $(CHECK_MODULES) \
1036         $(CHECK_TARGET_MODULES) \
1037         $(CHECK_X11_MODULES) \
1038         check-gcc
1039
1040 # Installation targets.
1041
1042 .PHONY: install uninstall source-vault binary-vault vault-install
1043 install: $(INSTALL_TARGET)
1044
1045 uninstall:
1046         @echo "the uninstall target is not supported in this tree"
1047
1048 source-vault:
1049         $(MAKE) -f ./release/Build-A-Release \
1050                 host=$(host_alias) source-vault
1051
1052 binary-vault:
1053         $(MAKE) -f ./release/Build-A-Release \
1054                 host=$(host_alias) target=$(target_alias)
1055
1056 vault-install:
1057         @if [ -f ./release/vault-install ] ; then \
1058           ./release/vault-install $(host_alias) $(target_alias) ; \
1059         else \
1060           true ; \
1061         fi
1062
1063 .PHONY: install.all
1064 install.all: install-no-fixedincludes
1065         @if [ -f ./gcc/Makefile ] ; then \
1066                 r=`pwd` ; export r ; \
1067                 $(SET_LIB_PATH) \
1068                 (cd ./gcc; \
1069                 $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
1070         else \
1071                 true ; \
1072         fi
1073
1074 # inet-install is used because the I*Net wants DejaGNU installed but
1075 # not built.  Similarly, gzip is built but not installed.
1076 inet-install:
1077         $(MAKE) INSTALL_MODULES="`echo $(INSTALL_MODULES) | sed -e 's/install-dejagnu//' -e 's/install-gzip//'`" install
1078
1079 # install-no-fixedincludes is used because Cygnus can not distribute
1080 # the fixed header files.
1081 .PHONY: install-no-fixedincludes
1082 install-no-fixedincludes: \
1083         installdirs \
1084         $(INSTALL_MODULES) \
1085         $(INSTALL_TARGET_MODULES) \
1086         $(INSTALL_X11_MODULES) \
1087         gcc-no-fixedincludes
1088
1089 # Install the gcc headers files, but not the fixed include files,
1090 # which Cygnus is not allowed to distribute.  This rule is very
1091 # dependent on the workings of the gcc Makefile.in.
1092 .PHONY: gcc-no-fixedincludes
1093 gcc-no-fixedincludes:
1094         @if [ -f ./gcc/Makefile ]; then \
1095           rm -rf gcc/tmp-include; \
1096           mv gcc/include gcc/tmp-include 2>/dev/null; \
1097           mkdir gcc/include; \
1098           cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
1099           touch gcc/stmp-fixinc gcc/include/fixed; \
1100           rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
1101           r=`pwd`; export r; \
1102           s=`cd $(srcdir); pwd` ; export s; \
1103           $(SET_LIB_PATH) \
1104           (cd ./gcc; \
1105            $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
1106           rm -rf gcc/include; \
1107           mv gcc/tmp-include gcc/include 2>/dev/null; \
1108         else true; fi
1109
1110 # start-sanitize-ide
1111 # Install Foundry.  Avoid installing a bunch of stuff we don't need.
1112 install-foundry:
1113         mods="$(INSTALL_MODULES)"; \
1114         x11_mods="$(INSTALL_X11_MODULES)"; \
1115         for d in install-tcl install-tk install-itcl install-tix install-ilu; do \
1116           mods="`echo $${mods} | sed -e "s/$$d//"`"; \
1117           x11_mods="`echo $${x11_mods} | sed -e "s/$$d//"`"; \
1118         done; \
1119         $(MAKE) INSTALL_MODULES="$${mods}" INSTALL_X11_MODULES="$${x11_mods}" install
1120         for d in tcl tk itcl tix ilu; do \
1121           if [ -f $$d/Makefile ]; then \
1122             r=`pwd`; export r; \
1123             s=`cd $(srcdir); pwd`; export s; \
1124             $(SET_LIB_PATH) \
1125             (cd $$d; $(MAKE) $(FLAGS_TO_PASS) install-minimal); \
1126           else \
1127             true; \
1128           fi; \
1129         done
1130 # end-sanitize-ide
1131
1132 # This rule is used to build the modules which use FLAGS_TO_PASS.  To
1133 # build a target all-X means to cd to X and make all.
1134 #
1135 # all-gui, and all-libproc are handled specially because
1136 # they are still experimental, and if they fail to build, that
1137 # shouldn't stop "make all".
1138 .PHONY: $(ALL_MODULES) all-gui all-libproc
1139 $(ALL_MODULES) all-gui all-libproc:
1140         @dir=`echo $@ | sed -e 's/all-//'`; \
1141         if [ -f ./$${dir}/Makefile ] ; then \
1142           r=`pwd`; export r; \
1143           s=`cd $(srcdir); pwd`; export s; \
1144           $(SET_LIB_PATH) \
1145           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
1146         else \
1147           true; \
1148         fi
1149
1150 # These rules are used to check the modules which use FLAGS_TO_PASS.
1151 # To build a target check-X means to cd to X and make check.  Some
1152 # modules are only tested in a native toolchain.
1153
1154 .PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
1155 $(NATIVE_CHECK_MODULES):
1156         @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
1157           dir=`echo $@ | sed -e 's/check-//'`; \
1158           if [ -f ./$${dir}/Makefile ] ; then \
1159             r=`pwd`; export r; \
1160             s=`cd $(srcdir); pwd`; export s; \
1161             $(SET_LIB_PATH) \
1162             (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
1163           else \
1164             true; \
1165           fi; \
1166         fi
1167
1168 $(CROSS_CHECK_MODULES):
1169         @dir=`echo $@ | sed -e 's/check-//'`; \
1170         if [ -f ./$${dir}/Makefile ] ; then \
1171           r=`pwd`; export r; \
1172           s=`cd $(srcdir); pwd`; export s; \
1173           $(SET_LIB_PATH) \
1174           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
1175         else \
1176           true; \
1177         fi
1178
1179 # This rule is used to install the modules which use FLAGS_TO_PASS.
1180 # To build a target install-X means to cd to X and make install.
1181 .PHONY: $(INSTALL_MODULES)
1182 $(INSTALL_MODULES): installdirs
1183         @dir=`echo $@ | sed -e 's/install-//'`; \
1184         if [ -f ./$${dir}/Makefile ] ; then \
1185           r=`pwd`; export r; \
1186           s=`cd $(srcdir); pwd`; export s; \
1187           $(SET_LIB_PATH) \
1188           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
1189         else \
1190           true; \
1191         fi
1192
1193 # This rule is used to configure the modules which are built with the
1194 # target tools.
1195 .PHONY: $(CONFIGURE_TARGET_MODULES)
1196 $(CONFIGURE_TARGET_MODULES):
1197         @dir=`echo $@ | sed -e 's/configure-target-//'`; \
1198         if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
1199           r=`pwd`; export r; \
1200           $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
1201           if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
1202             if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
1203               if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
1204                 rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
1205               else \
1206                 echo "Multilibs changed for $${dir}, reconfiguring"; \
1207                 rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
1208                 mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
1209               fi; \
1210             else \
1211               mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
1212             fi; \
1213           fi; \
1214         fi; exit 0      # break command into two pieces
1215         @dir=`echo $@ | sed -e 's/configure-target-//'`; \
1216         if [ ! -d $(TARGET_SUBDIR) ]; then \
1217           true; \
1218         elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1219           true; \
1220         elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
1221           if [ -d $(srcdir)/$${dir} ]; then \
1222             [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
1223             r=`pwd`; export r; \
1224             s=`cd $(srcdir); pwd`; export s; \
1225             $(SET_LIB_PATH) \
1226             AR="$(AR_FOR_TARGET)"; export AR; \
1227             AS="$(AS_FOR_TARGET)"; export AS; \
1228             CC="$(CC_FOR_TARGET)"; export CC; \
1229             CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
1230             CXX="$(CXX_FOR_TARGET)"; export CXX; \
1231             CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
1232             DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
1233             LD="$(LD_FOR_TARGET)"; export LD; \
1234             LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
1235             NM="$(NM_FOR_TARGET)"; export NM; \
1236             RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
1237             WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
1238             echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
1239             cd $(TARGET_SUBDIR)/$${dir}; \
1240             case $(srcdir) in \
1241             /*) \
1242               topdir=$(srcdir) ;; \
1243             *) \
1244               case "$(TARGET_SUBDIR)" in \
1245               .) topdir="../$(srcdir)" ;; \
1246               *) topdir="../../$(srcdir)" ;; \
1247               esac ;; \
1248             esac; \
1249             if [ "$(srcdir)" = "." ] ; then \
1250               if [ "$(TARGET_SUBDIR)" != "." ] ; then \
1251                 if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
1252                   if [ -f Makefile ]; then \
1253                     if $(MAKE) distclean; then \
1254                       true; \
1255                     else \
1256                       exit 1; \
1257                     fi; \
1258                   else \
1259                     true; \
1260                   fi; \
1261                 else \
1262                   exit 1; \
1263                 fi; \
1264               else \
1265                 true; \
1266               fi; \
1267               srcdiroption="--srcdir=."; \
1268               libsrcdir="."; \
1269             else \
1270               srcdiroption="--srcdir=$${topdir}/$${dir}"; \
1271               libsrcdir="$$s/$${dir}"; \
1272             fi; \
1273             if [ -f $${libsrcdir}/configure ] ; then \
1274               $(SHELL) $${libsrcdir}/configure \
1275                 $(CONFIG_ARGUMENTS) $${srcdiroption} \
1276                 --with-target-subdir="$(TARGET_SUBDIR)"; \
1277             else \
1278               $(SHELL) $$s/configure \
1279                 $(CONFIG_ARGUMENTS) $${srcdiroption} \
1280                 --with-target-subdir="$(TARGET_SUBDIR)"; \
1281             fi; \
1282           else \
1283             true; \
1284           fi; \
1285         else \
1286           true; \
1287         fi
1288
1289 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
1290 # To build a target all-X means to cd to X and make all.
1291 .PHONY: $(ALL_TARGET_MODULES)
1292 $(ALL_TARGET_MODULES):
1293         @dir=`echo $@ | sed -e 's/all-target-//'`; \
1294         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1295           r=`pwd`; export r; \
1296           s=`cd $(srcdir); pwd`; export s; \
1297           $(SET_LIB_PATH) \
1298           (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
1299         else \
1300           true; \
1301         fi
1302
1303 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
1304 # To build a target install-X means to cd to X and make install.
1305 .PHONY: $(CHECK_TARGET_MODULES)
1306 $(CHECK_TARGET_MODULES):
1307         @dir=`echo $@ | sed -e 's/check-target-//'`; \
1308         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1309           r=`pwd`; export r; \
1310           s=`cd $(srcdir); pwd`; export s; \
1311           $(SET_LIB_PATH) \
1312           (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
1313         else \
1314           true; \
1315         fi
1316
1317 # This rule is used to install the modules which use
1318 # TARGET_FLAGS_TO_PASS.  To build a target install-X means to cd to X
1319 # and make install.
1320 .PHONY: $(INSTALL_TARGET_MODULES)
1321 $(INSTALL_TARGET_MODULES): installdirs
1322         @dir=`echo $@ | sed -e 's/install-target-//'`; \
1323         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1324           r=`pwd`; export r; \
1325           s=`cd $(srcdir); pwd`; export s; \
1326           $(SET_LIB_PATH) \
1327           (cd $(TARGET_SUBDIR)/$${dir}; \
1328             $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
1329         else \
1330           true; \
1331         fi
1332
1333 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
1334 # To build a target all-X means to cd to X and make all.
1335 .PHONY: $(ALL_X11_MODULES)
1336 $(ALL_X11_MODULES):
1337         @dir=`echo $@ | sed -e 's/all-//'`; \
1338         if [ -f ./$${dir}/Makefile ] ; then \
1339           r=`pwd`; export r; \
1340           s=`cd $(srcdir); pwd`; export s; \
1341           $(SET_LIB_PATH) \
1342           (cd $${dir}; \
1343            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
1344         else \
1345           true; \
1346         fi
1347
1348 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
1349 # To build a target check-X means to cd to X and make all.
1350 .PHONY: $(CHECK_X11_MODULES)
1351 $(CHECK_X11_MODULES):
1352         @dir=`echo $@ | sed -e 's/check-//'`; \
1353         if [ -f ./$${dir}/Makefile ] ; then \
1354           r=`pwd`; export r; \
1355           s=`cd $(srcdir); pwd`; export s; \
1356           $(SET_LIB_PATH) \
1357           (cd $${dir}; \
1358            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
1359         else \
1360           true; \
1361         fi
1362
1363 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
1364 # To build a target install-X means to cd to X and make install.
1365 .PHONY: $(INSTALL_X11_MODULES)
1366 $(INSTALL_X11_MODULES): installdirs
1367         @dir=`echo $@ | sed -e 's/install-//'`; \
1368         if [ -f ./$${dir}/Makefile ] ; then \
1369           r=`pwd`; export r; \
1370           s=`cd $(srcdir); pwd`; export s; \
1371           $(SET_LIB_PATH) \
1372           (cd $${dir}; \
1373            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
1374         else \
1375           true; \
1376         fi
1377
1378 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
1379 .PHONY: all-gcc
1380 all-gcc:
1381         @if [ -f ./gcc/Makefile ] ; then \
1382           r=`pwd`; export r; \
1383           s=`cd $(srcdir); pwd`; export s; \
1384           $(SET_LIB_PATH) \
1385           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
1386         else \
1387           true; \
1388         fi
1389
1390 .PHONY: all-bootstrap
1391 all-bootstrap:
1392         @if [ -f ./gcc/Makefile ] ; then \
1393           r=`pwd`; export r; \
1394           s=`cd $(srcdir); pwd`; export s; \
1395           $(SET_LIB_PATH) \
1396           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) bootstrap); \
1397         else \
1398           true; \
1399         fi
1400
1401 .PHONY: check-gcc
1402 check-gcc:
1403         @if [ -f ./gcc/Makefile ] ; then \
1404           r=`pwd`; export r; \
1405           s=`cd $(srcdir); pwd`; export s; \
1406           $(SET_LIB_PATH) \
1407           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
1408         else \
1409           true; \
1410         fi
1411
1412 .PHONY: install-gcc
1413 install-gcc:
1414         @if [ -f ./gcc/Makefile ] ; then \
1415           r=`pwd`; export r; \
1416           s=`cd $(srcdir); pwd`; export s; \
1417           $(SET_LIB_PATH) \
1418           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
1419         else \
1420           true; \
1421         fi
1422
1423
1424 # EXPERIMENTAL STUFF
1425 # This rule is used to install the modules which use FLAGS_TO_PASS.
1426 # To build a target install-X means to cd to X and make install.
1427 .PHONY: install-dosrel
1428 install-dosrel: installdirs info
1429         @dir=`echo $@ | sed -e 's/install-//'`; \
1430         if [ -f ./$${dir}/Makefile ] ; then \
1431           r=`pwd`; export r; \
1432           s=`cd $(srcdir); pwd`; export s; \
1433           $(SET_LIB_PATH) \
1434           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
1435         else \
1436           true; \
1437         fi
1438
1439 install-dosrel-fake:
1440
1441
1442 # This is a list of inter-dependencies among modules.
1443 all-apache:
1444 all-autoconf: all-m4 all-texinfo
1445 all-automake:
1446 all-bash:
1447 all-bfd:
1448 all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc
1449 all-bison: all-texinfo
1450 all-byacc:
1451 all-cvs:
1452 configure-target-cygmon: $(ALL_GCC)
1453 all-target-cygmon: configure-target-cygmon all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
1454 all-db:
1455 all-dejagnu: all-tcl all-expect all-tk
1456 all-diff: all-libiberty
1457 all-emacs:
1458 all-emacs19: all-bison all-byacc
1459 all-etc:
1460 configure-target-examples: $(ALL_GCC)
1461 all-target-examples: configure-target-examples
1462 all-expect: all-tcl all-tk
1463 all-fileutils: all-libiberty
1464 all-findutils:
1465 all-find:
1466 all-flex: all-libiberty all-bison all-byacc
1467 all-gas: all-libiberty all-opcodes all-bfd
1468 all-gash: all-tcl
1469 all-gawk:
1470 ALL_GCC = all-gcc
1471 all-gcc: all-bison all-byacc all-binutils all-gas all-ld
1472 all-bootstrap: all-libiberty all-bison all-byacc all-binutils all-gas all-ld
1473 GDB_TK = all-tk all-tcl all-itcl all-tix all-libide
1474 all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
1475 all-gnuserv:
1476 configure-target-gperf: $(ALL_GCC)
1477 all-target-gperf: configure-target-gperf all-target-libiberty all-target-libg++
1478 all-gprof: all-libiberty all-bfd all-opcodes
1479 all-grep: all-libiberty
1480 all-grez: all-libiberty all-bfd all-opcodes
1481 all-gui: all-gdb all-libproc all-target-librx
1482 all-guile:
1483 all-gzip: all-libiberty
1484 all-hello: all-libiberty
1485 # start-sanitize-ide
1486 all-ilu:
1487 # end-sanitize-ide
1488 all-indent:
1489 all-inet: all-tcl all-send-pr all-perl
1490 all-ispell: all-emacs19
1491 all-itcl: all-tcl all-tk
1492 # start-sanitize-ide
1493 all-jstools: all-tcl all-tk all-tix all-libide
1494 # end-sanitize-ide
1495 all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex
1496 configure-target-libg++: $(ALL_GCC) configure-target-librx
1497 all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
1498 configure-target-libgloss: $(ALL_GCC)
1499 all-target-libgloss: configure-target-libgloss configure-target-newlib
1500 configure-target-libio: $(ALL_GCC)
1501 all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
1502 check-target-libio: all-target-libstdc++
1503 all-libiberty:
1504 # start-sanitize-ide
1505 all-libide: all-tcl all-tk all-itcl all-ilu
1506 # end-sanitize-ide
1507 configure-target-librx: $(ALL_GCC) configure-target-newlib
1508 all-target-librx: configure-target-librx
1509 configure-target-libstdc++: $(ALL_GCC)
1510 all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
1511 all-m4: all-libiberty
1512 all-make: all-libiberty
1513 all-mmalloc:
1514 configure-target-newlib: $(ALL_GCC)
1515 all-target-newlib: configure-target-newlib all-binutils all-gas all-gcc
1516 all-opcodes: all-bfd all-libiberty
1517 all-patch: all-libiberty
1518 all-perl:
1519 all-prms: all-libiberty
1520 all-rcs:
1521 all-readline:
1522 all-recode: all-libiberty
1523 all-sed: all-libiberty
1524 all-send-pr: all-prms
1525 all-shellutils:
1526 all-sim: all-libiberty all-bfd all-opcodes all-readline
1527 all-sn: all-tcl all-tk all-tix all-itcl all-db all-grep
1528 all-tar: all-libiberty
1529 all-tcl:
1530 all-tclX: all-tcl all-tk
1531 all-tk: all-tcl
1532 all-texinfo: all-libiberty
1533 all-textutils:
1534 all-tgas: all-libiberty all-bfd all-opcodes
1535 all-time:
1536 all-tix: all-tcl all-tk
1537 # start-sanitize-ide
1538 all-vmake: all-tcl all-tk all-itcl all-tix all-libide
1539 # end-sanitize-ide
1540 all-wdiff:
1541 all-target-winsup: all-target-newlib all-target-libiberty all-target-librx all-target-libio configure-target-winsup
1542 configure-target-winsup: configure-target-newlib
1543 all-uudecode: all-libiberty
1544 configure-target-libiberty: $(ALL_GCC)
1545 all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib
1546 all-target: $(ALL_TARGET_MODULES)
1547 install-itcl: install-tcl
1548 install-target: $(INSTALL_TARGET_MODULES)
1549
1550 ### other supporting targets
1551
1552 MAKEDIRS= \
1553         $(prefix) \
1554         $(exec_prefix)
1555 .PHONY: installdirs
1556 installdirs: mkinstalldirs
1557         $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
1558
1559 dir.info: do-install-info
1560         if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
1561           $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
1562           mv -f dir.info.new dir.info ; \
1563         else true ; \
1564         fi
1565
1566 dist:
1567         @echo "Building a full distribution of this tree isn't done"
1568         @echo "via 'make dist'.  Check out the etc/ subdirectory"
1569
1570 etags tags: TAGS
1571
1572 # Right now this just builds TAGS in each subdirectory.  emacs19 has the
1573 # ability to use several tags files at once, so there is probably no need
1574 # to combine them into one big TAGS file (like CVS 1.3 does).  We could
1575 # (if we felt like it) have this Makefile write a piece of elisp which
1576 # the user could load to tell emacs19 where all the TAGS files we just
1577 # built are.
1578 TAGS: do-TAGS
1579
1580 # with the gnu make, this is done automatically.
1581
1582 Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
1583         $(SHELL) ./config.status
1584
1585 #
1586 # Support for building net releases
1587
1588 # Files in devo used in any net release.
1589 # ChangeLog omitted because it may refer to files which are not in this
1590 # distribution (perhaps it would be better to include it anyway).
1591 DEVO_SUPPORT= README Makefile.in configure configure.in \
1592         config.guess config.sub config move-if-change \
1593         mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
1594         COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
1595         mkinstalldirs ltconfig ltmain.sh missing ylwrap
1596
1597 # Files in devo/etc used in any net release.
1598 # ChangeLog omitted because it may refer to files which are not in this
1599 # distribution (perhaps it would be better to include it anyway).
1600 ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
1601         make-stds.texi standards.info*
1602
1603 # When you use `make setup-dirs' or `make taz' you should always redefine
1604 # this macro.
1605 SUPPORT_FILES = list-of-support-files-for-tool-in-question
1606
1607 .PHONY: taz
1608
1609 taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
1610   texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
1611         # Take out texinfo from a few places; make simple BISON=bison line.
1612         sed -e '/^all\.normal: /s/\all-texinfo //' \
1613             -e '/^      install-texinfo /d' \
1614         <Makefile.in >tmp
1615         mv -f tmp Makefile.in
1616         #
1617         $(start-sanitize-Sanitize)
1618         @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
1619         $(end-sanitize-Sanitize)
1620         ./configure sun4
1621         [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
1622           || $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \
1623             CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
1624         # Make links, and run "make diststuff" or "make info" when needed.
1625         rm -rf proto-toplev ; mkdir proto-toplev
1626         set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1627         for d in $$dirs ; do \
1628           if [ -d $$d ]; then \
1629             if [ ! -f $$d/Makefile ] ; then true ; \
1630             elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
1631                 (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
1632             elif grep '^info:' $$d/Makefile >/dev/null ; then \
1633                 (cd $$d ; $(MAKE) info ) || exit 1 ; \
1634             fi ; \
1635             if [ -d $$d/proto-$$d.dir ]; then \
1636               ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
1637             else \
1638               ln -s ../$$d proto-toplev/$$d ; \
1639             fi ; \
1640           else ln -s ../$$d proto-toplev/$$d ; fi ; \
1641         done
1642         cd etc ; $(MAKE) info
1643         $(MAKE) distclean
1644         #
1645         mkdir proto-toplev/etc
1646         (cd proto-toplev/etc; \
1647          for i in $(ETC_SUPPORT); do \
1648                 ln -s ../../etc/$$i . ; \
1649          done)
1650         #
1651         # Take out texinfo from configurable dirs
1652         rm proto-toplev/configure.in
1653         sed -e '/^host_tools=/s/texinfo //' \
1654             <configure.in >proto-toplev/configure.in
1655         #
1656         mkdir proto-toplev/texinfo
1657         ln -s ../../texinfo/texinfo.tex         proto-toplev/texinfo/
1658         ln -s ../../texinfo/gpl.texinfo         proto-toplev/texinfo/
1659         ln -s ../../texinfo/lgpl.texinfo        proto-toplev/texinfo/
1660         if test -r texinfo/util/tex3patch ; then \
1661           mkdir proto-toplev/texinfo/util && \
1662           ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
1663         else true; fi
1664         chmod og=u `find . -print`
1665         if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
1666           ver=`sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'`; \
1667         else \
1668           ver=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
1669         fi; \
1670         $(MAKE) -f Makefile.in do-tar-gz TOOL=$(TOOL) VER=$$ver
1671
1672 do-tar-gz:
1673         echo "==> Making $(TOOL)-$(VER).tar.gz"
1674         -rm -f $(TOOL)-$(VER)
1675         ln -s proto-toplev $(TOOL)-$(VER)
1676         tar cfh $(TOOL)-$(VER).tar $(TOOL)-$(VER)
1677         $(GZIPPROG) -v -9 $(TOOL)-$(VER).tar
1678
1679 TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
1680 DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
1681
1682 .PHONY: gas.tar.gz
1683 GAS_SUPPORT_DIRS= bfd include libiberty opcodes setup.com makefile.vms
1684 gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
1685         $(MAKE) -f Makefile.in taz TOOL=gas \
1686                 SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
1687
1688 # The FSF "binutils" release includes gprof and ld.
1689 .PHONY: binutils.tar.gz
1690 BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof setup.com makefile.vms
1691 binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
1692         $(MAKE) -f Makefile.in taz TOOL=binutils \
1693                 SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1694
1695 .PHONY: gas+binutils.tar.gz
1696 GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
1697 gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
1698         $(MAKE) -f Makefile.in taz TOOL=gas \
1699                 SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1700
1701 .PHONY: libg++.tar.gz
1702 LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
1703 libg++.tar.gz: $(DIST_SUPPORT) libg++
1704         $(MAKE) -f Makefile.in taz TOOL=libg++ \
1705                 SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
1706
1707 GNATS_SUPPORT_DIRS=include libiberty send-pr
1708 gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
1709         $(MAKE) -f  Makefile.in taz TOOL=gnats \
1710                 SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
1711
1712 .PHONY: gdb.tar.gz
1713 GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils
1714 GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
1715 gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
1716         $(MAKE) -f Makefile.in taz TOOL=gdb \
1717                 SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
1718
1719 .PHONY: newlib.tar.gz
1720 NEWLIB_SUPPORT_DIRS=libgloss
1721 # taz configures for the sun4 target which won't configure newlib.
1722 # We need newlib configured so that the .info files are made.
1723 # Unfortunately, it is not enough to just configure newlib separately:
1724 # taz will build the .info files but since SUBDIRS won't contain newlib,
1725 # distclean won't be run (leaving Makefile, config.status, and the tmp files
1726 # used in building the .info files, eg: *.def, *.ref).
1727 # The problem isn't solvable however without a lot of extra work because
1728 # target libraries are built in subdir $(target_alias) which gets nuked during
1729 # the make distclean.  For now punt on the issue of shipping newlib info files
1730 # with newlib net releases and wait for a day when some native target (sun4?)
1731 # supports newlib (if only minimally).
1732 newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
1733         $(MAKE) -f Makefile.in taz TOOL=newlib \
1734                 SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
1735                 DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
1736
1737 .NOEXPORT:
1738 MAKEOVERRIDES=
1739
1740 # start-sanitize-chill
1741 ## This is ugly, but I don't want GNU make to put these variables in
1742 ## the environment.  Older makes will see this as a set of targets
1743 ## with no dependencies and no actions.
1744 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
1745 # end-sanitize-chill
1746
1747 # end of Makefile.in