2 # Makefile for directory with subdirs to build.
3 # Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
5 # This file is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
24 exec_prefix = $(prefix)
25 bindir = $(exec_prefix)/bin
26 libdir = $(exec_prefix)/lib
27 tooldir
= $(exec_prefix)/$(target
)
29 program_transform_name
=
31 datadir = $(prefix)/lib
32 mandir = $(prefix)/man
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
42 infodir = $(prefix)/info
43 includedir = $(prefix)/include
44 docdir
= $(datadir)/doc
48 INSTALL
= $${srcroot}/install.sh
-c
49 INSTALL_PROGRAM
= $(INSTALL
)
50 INSTALL_DATA
= $(INSTALL
) -m
644
51 INSTALL_XFORM
= $(INSTALL
) -t
='$(program_transform_name)'
53 INSTALL_DOSREL
= install-dosrel-fake
60 # Special variables passed down in EXTRA_GCC_FLAGS. They are defined
61 # here so that they can be overridden by Makefile fragments.
62 HOST_CC
= $(CC_FOR_BUILD
)
64 HOST_PREFIX_1
= loser-
66 # We don't specify -g -O because many compilers don't support -g -O,
67 # and/or -O is broken in and of itself.
70 CFLAGS_FOR_TARGET
= $(CFLAGS
)
71 LIBCFLAGS_FOR_TARGET
= $(CFLAGS_FOR_TARGET
)
73 # start-sanitize-chill
74 CHILLFLAGS
= $(CFLAGS
)
79 # Use -O2 to stress test the compiler.
81 LIBCXXFLAGS
= $(CXXFLAGS
) -fno-implicit-templates
82 CXXFLAGS_FOR_TARGET
= $(CXXFLAGS
)
83 LIBCXXFLAGS_FOR_TARGET
= $(CXXFLAGS_FOR_TARGET
) -fno-implicit-templates
87 # Not plain GZIP, since gzip looks there for extra command-line options.
90 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
91 BISON
= `if [ -f $$r/byacc/byacc ] ; \
92 then echo $$r/byacc/byacc ; \
96 LEX
= `if [ -f $$r/flex/flex ] ; \
97 then echo $$r/flex/flex ; \
100 M4
= `if [ -f $$r/m4/m4 ] ; \
101 then echo $$r/m4/m4 ; \
104 MAKEINFO
= `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
105 then echo $$r/texinfo/makeinfo/makeinfo ; \
106 else echo makeinfo ; fi`
108 # This just becomes part of the MAKEINFO definition passed down to
109 # sub-makes. It lets flags be given on the command line while still
110 # using the makeinfo from the object tree.
113 EXPECT
= `if [ -f $$r/expect/expect ] ; \
114 then echo $$r/expect/expect ; \
115 else echo expect ; fi`
117 RUNTEST
= `if [ -f $${srcroot}/dejagnu/runtest ] ; \
118 then echo $${srcroot}/dejagnu/runtest ; \
119 else echo runtest ; fi`
122 # libraries that may need to be augmented on a system-by-system basis
125 # compilers to use to create programs which must be run in the build
128 CXX_FOR_BUILD
= $(CXX
)
130 SUBDIRS
= "this is set via configure, don't edit this"
134 INSTALL_TARGET
= install-dirs \
136 $(INSTALL_TARGET_MODULES
) \
137 $(INSTALL_X11_MODULES
) \
143 if [ -f $$r/gcc/Makefile ] ; then \
144 if [ -f $$r/newlib/Makefile ] ; then \
145 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
147 echo $$r/gcc/xgcc -B$$r/gcc/; \
150 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
153 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
157 # start-sanitize-chill
158 CHILL_FOR_TARGET
= ` \
159 if [ -f $$r/gcc/Makefile ] ; then \
160 echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/chillrt/; \
162 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
165 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
172 if [ -f $$r/gcc/Makefile ] ; then \
173 if [ -f $$r/newlib/Makefile ] ; then \
174 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
176 echo $$r/gcc/xgcc -B$$r/gcc/; \
179 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
182 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
187 if [ -f $$r/gas/as.new ] ; then \
188 echo $$r/gas/as.new ; \
190 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
193 t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
198 if [ -f $$r/binutils/ar ] ; then \
199 echo $$r/binutils/ar ; \
201 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
204 t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
208 RANLIB_FOR_TARGET
= ` \
209 if [ -f $$r/binutils/ranlib ] ; then \
210 echo $$r/binutils/ranlib ; \
212 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
215 t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
220 if [ -f $$r/binutils/nm.new ] ; then \
221 echo $$r/binutils/nm.new ; \
223 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
226 t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
230 #### host and target specific makefile fragments come in here.
233 # Flags to pass down to all sub-makes.
234 # Please keep these in alphabetical order.
235 BASE_FLAGS_TO_PASS
= \
236 "AR_FLAGS=$(AR_FLAGS)" \
237 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
238 "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
240 "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
241 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
243 "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
244 $(start-sanitize-chill
)\
245 "CHILLFLAGS=$(CHILLFLAGS)" \
246 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
247 "CHILL_LIB=$(CHILL_LIB)" \
248 $(end-sanitize-chill
)\
249 "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
250 "CXXFLAGS=$(CXXFLAGS)" \
251 "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
252 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
253 "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
254 "INSTALL=$(INSTALL)" \
255 "INSTALL_DATA=$(INSTALL_DATA)" \
256 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
257 "INSTALL_XFORM=$(INSTALL_XFORM)" \
258 "LDFLAGS=$(LDFLAGS)" \
260 "LIBCFLAGS=$(LIBCFLAGS)" \
261 "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
262 "LIBCXXFLAGS=$(LIBCFLAGS)" \
263 "LIBCXXFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
265 "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
266 "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
267 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
270 "RUNTEST=$(RUNTEST)" \
271 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
273 "exec_prefix=$(exec_prefix)" \
277 # Flags to pass down to most sub-makes, in which we're building with
278 # the host environment.
279 # If any variables are added here, they must be added to do-*, below.
288 FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_HOST_FLAGS
)
290 # Flags that are concerned with the location of the X11 include files
292 X11_FLAGS_TO_PASS
= \
293 "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
294 "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
297 # Flags to pass down to makes which are built with the target environment.
298 # The double $ decreases the length of the command line; the variables
299 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
300 # If any variables are added here, they must be added to do-*, below.
301 EXTRA_TARGET_FLAGS
= \
302 'AR=$$(AR_FOR_TARGET)' \
303 'AS=$$(AS_FOR_TARGET)' \
304 'CC=$$(CC_FOR_TARGET)' \
305 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
306 'CXX=$$(CXX_FOR_TARGET)' \
307 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
308 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
309 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
310 'NM=$$(NM_FOR_TARGET)' \
311 'RANLIB=$$(RANLIB_FOR_TARGET)'
313 TARGET_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_TARGET_FLAGS
)
315 # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
316 # unfortunately needs the native compiler and the target ar and
318 # If any variables are added here, they must be added to do-*, below.
319 # The HOST_* variables are a special case, which are used for the gcc
320 # cross-building scheme.
322 'AR=$$(AR_FOR_TARGET)' \
326 'HOST_CC=$(CC_FOR_BUILD)' \
327 'HOST_PREFIX=$(HOST_PREFIX)' \
328 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
330 'RANLIB=$$(RANLIB_FOR_TARGET)'
332 GCC_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_GCC_FLAGS
)
334 # This is a list of the targets for all of the modules which are compiled
335 # using $(FLAGS_TO_PASS).
383 # This is a list of the check targets for all of the modules which are
384 # compiled using $(FLAGS_TO_PASS).
385 # This is a list of the check targets for all of the modules which are
386 # compiled using $(FLAGS_TO_PASS).
388 # The list is in two parts. The first lists those tools which
389 # are tested as part of the host's native tool-chain, and not
390 # tested in a cross configuration.
391 NATIVE_CHECK_MODULES
= \
395 CROSS_CHECK_MODULES
= \
438 CHECK_MODULES
=$(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
440 # This is a list of the install targets for all of the modules which are
441 # compiled using $(FLAGS_TO_PASS).
489 # This is a list of the targets for all of the modules which are compiled
490 # using $(X11_FLAGS_TO_PASS).
499 # This is a list of the check targets for all of the modules which are
500 # compiled using $(X11_FLAGS_TO_PASS).
501 CHECK_X11_MODULES
= \
508 # This is a list of the install targets for all the modules which are
509 # compiled using $(X11_FLAGS_TO_PASS).
510 INSTALL_X11_MODULES
= \
518 # This is a list of the targets for all of the modules which are compiled
519 # using $(TARGET_FLAGS_TO_PASS).
520 ALL_TARGET_MODULES
= \
521 $(start-sanitize-chill
) \
523 $(end-sanitize-chill
) \
532 # This is a list of the check targets for all of the modules which are
533 # compiled using $(TARGET_FLAGS_TO_PASS).
534 CHECK_TARGET_MODULES
= \
535 $(start-sanitize-chill
) \
537 $(end-sanitize-chill
) \
544 # This is a list of the install targets for all of the modules which are
545 # compiled using $(TARGET_FLAGS_TO_PASS).
546 INSTALL_TARGET_MODULES
= \
547 $(start-sanitize-chill
) \
549 $(end-sanitize-chill
) \
557 # This is a shell case of all modules which are compiled using
558 # $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
559 TARGET_LIBS
= libio | libstdc
++ | librx | libg
++ | newlib | xiberty
560 # start-sanitize-chill
561 TARGET_LIBS
= chillrt | libio | libstdc
++ | librx | libg
++ | newlib | xiberty
564 # The first rule in the file had better be this one. Don't put any above it.
568 # The target built for a native build.
572 $(ALL_TARGET_MODULES
) \
576 # Do a target for all the subdirectories. A ``make do-X'' will do a
577 # ``make X'' in all subdirectories (because, in general, there is a
578 # dependency (below) of X upon do-X, a ``make X'' will also do this,
579 # but it may do additional work as well).
580 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
581 # because it is so large that it can easily overflow the command line
582 # length limit on some systems.
595 @target
=`echo $@ | sed -e 's/^do-//'`; \
597 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
598 for i in
$(SUBDIRS
); do \
599 if
[ -f .
/$$i/Makefile
]; then \
602 for flag in
$(EXTRA_TARGET_FLAGS
); do \
603 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
607 for flag in
$(EXTRA_GCC_FLAGS
); do \
608 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
612 for flag in
$(EXTRA_HOST_FLAGS
); do \
613 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
617 export AR AS CC CXX NM RANLIB
; \
619 $(MAKE
) $(BASE_FLAGS_TO_PASS
) "AR=$${AR}" "AS=$${AS}" \
620 "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
621 "RANLIB=$${RANLIB}" \
623 then true
; else exit
1; fi
; \
627 # Here are the targets which correspond to the do-X targets.
629 .PHONY
: info installcheck dvi install-info
630 .PHONY
: clean distclean mostlyclean realclean local-clean local-distclean
632 installcheck: do-installcheck
635 install-info
: do-install-info
dir.
info
636 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
637 if
[ -f
dir.
info ] ; then \
638 $(INSTALL_DATA
) dir.
info $(infodir)/dir.
info ; \
642 -rm -f
*.a TEMP errs core
*.o
*~ \
#* TAGS *.E
645 -rm -f Makefile config.status
647 clean: do-clean local-clean
648 mostlyclean: do-mostlyclean local-clean
649 distclean: do-distclean local-clean local-distclean
650 realclean: do-realclean local-clean local-distclean
655 check: $(CHECK_MODULES
) \
656 $(CHECK_TARGET_MODULES
) \
657 $(CHECK_X11_MODULES
) \
660 # Installation targets.
662 .PHONY
: install uninstall vault-install
663 install: $(INSTALL_TARGET
)
666 @echo
"the uninstall target is not supported in this tree"
669 @if
[ -f .
/release
/vault-install
] ; then \
670 .
/release
/vault-install
$(host_alias
) $(target_alias
) ; \
676 install.
all: install-no-fixedincludes
677 @if
[ -f .
/gcc
/Makefile
] ; then \
678 r
=`pwd` ; export r
; \
680 $(MAKE
) $(FLAGS_TO_PASS
) install-headers
) ; \
685 # install-no-fixedincludes is used because Cygnus can not distribute
686 # the fixed header files.
687 .PHONY
: install-no-fixedincludes
688 install-no-fixedincludes
: \
691 $(INSTALL_TARGET_MODULES
) \
692 $(INSTALL_X11_MODULES
) \
695 # Install the gcc headers files, but not the fixed include files,
696 # which Cygnus is not allowed to distribute. This rule is very
697 # dependent on the workings of the gcc Makefile.in.
698 .PHONY
: gcc-no-fixedincludes
699 gcc-no-fixedincludes
:
700 @if
[ -f .
/gcc
/Makefile
]; then \
701 rm -rf gcc
/tmp-include
; \
702 mv gcc
/include gcc
/tmp-include
2>/dev
/null
; \
704 cp
$(srcdir)/gcc
/gsyslimits.h gcc
/include/syslimits.h
; \
705 touch gcc
/stmp-fixinc gcc
/include/fixed
; \
706 rm -f gcc
/stmp-headers gcc
/stmp-int-hdrs
; \
708 srcroot
=`cd $(srcdir); pwd` ; export srcroot
; \
710 $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
711 rm -rf gcc
/include; \
712 mv gcc
/tmp-include gcc
/include 2>/dev
/null
; \
715 # This rule is used to build the modules which use FLAGS_TO_PASS. To
716 # build a target all-X means to cd to X and make all.
717 # all-glob is handled specially because it doesn't actually build.
719 # all-gui, and all-libproc are handled specially because
720 # they are still experimental, and if they fail to build, that
721 # shouldn't stop "make all".
722 .PHONY
: $(ALL_MODULES
) all-glob all-gui all-libproc
723 $(ALL_MODULES
) all-glob all-gui all-libproc
:
724 @
dir=`echo $@ | sed -e 's/all-//'`; \
725 if
[ -f .
/$${dir}/Makefile
] ; then \
727 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
728 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) all); \
733 # These rules are used to check the modules which use FLAGS_TO_PASS.
734 # To build a target check-X means to cd to X and make check. Some
735 # modules are only tested in a native toolchain.
737 .PHONY
: $(CHECK_MODULES
) $(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
738 $(NATIVE_CHECK_MODULES
):
739 @if
[ "$(host_canonical)" = "$(target_canonical)" ] ; then \
740 dir=`echo $@ | sed -e 's/check-//'`; \
741 if
[ -f .
/$${dir}/Makefile
] ; then \
743 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
744 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
750 $(CROSS_CHECK_MODULES
):
751 @
dir=`echo $@ | sed -e 's/check-//'`; \
752 if
[ -f .
/$${dir}/Makefile
] ; then \
754 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
755 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
760 # This rule is used to install the modules which use FLAGS_TO_PASS.
761 # To build a target install-X means to cd to X and make install.
762 .PHONY
: $(INSTALL_MODULES
)
763 $(INSTALL_MODULES
): install-dirs
764 @
dir=`echo $@ | sed -e 's/install-//'`; \
765 if
[ -f .
/$${dir}/Makefile
] ; then \
767 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
768 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
773 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
774 # To build a target all-X means to cd to X and make all.
775 .PHONY
: $(ALL_TARGET_MODULES
)
776 $(ALL_TARGET_MODULES
):
777 @
dir=`echo $@ | sed -e 's/all-//'`; \
778 if
[ -f .
/$${dir}/Makefile
] ; then \
780 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
781 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) all); \
786 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
787 # To build a target install-X means to cd to X and make install.
788 .PHONY
: $(CHECK_TARGET_MODULES
)
789 $(CHECK_TARGET_MODULES
):
790 @
dir=`echo $@ | sed -e 's/check-//'`; \
791 if
[ -f .
/$${dir}/Makefile
] ; then \
793 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
794 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check); \
799 # This rule is used to install the modules which use
800 # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
802 .PHONY
: $(INSTALL_TARGET_MODULES
)
803 $(INSTALL_TARGET_MODULES
): install-dirs
804 @
dir=`echo $@ | sed -e 's/install-//'`; \
805 if
[ -f .
/$${dir}/Makefile
] ; then \
807 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
808 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) install); \
813 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
814 # To build a target all-X means to cd to X and make all.
815 .PHONY
: $(ALL_X11_MODULES
)
817 @
dir=`echo $@ | sed -e 's/all-//'`; \
818 if
[ -f .
/$${dir}/Makefile
] ; then \
820 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
822 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) all); \
827 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
828 # To build a target check-X means to cd to X and make all.
829 .PHONY
: $(CHECK_X11_MODULES
)
830 $(CHECK_X11_MODULES
):
831 @
dir=`echo $@ | sed -e 's/check-//'`; \
832 if
[ -f .
/$${dir}/Makefile
] ; then \
834 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
836 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) check); \
841 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
842 # To build a target install-X means to cd to X and make install.
843 .PHONY
: $(INSTALL_X11_MODULES
)
844 $(INSTALL_X11_MODULES
):
845 @
dir=`echo $@ | sed -e 's/install-//'`; \
846 if
[ -f .
/$${dir}/Makefile
] ; then \
848 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
850 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) install); \
855 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
858 @if
[ -f .
/gcc
/Makefile
] ; then \
860 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
861 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) all); \
868 @if
[ -f .
/gcc
/Makefile
] ; then \
870 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
871 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) check); \
878 @if
[ -f .
/gcc
/Makefile
] ; then \
880 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
881 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
888 # This rule is used to install the modules which use FLAGS_TO_PASS.
889 # To build a target install-X means to cd to X and make install.
890 .PHONY
: install-dosrel
891 install-dosrel
: install-dirs
info
892 @
dir=`echo $@ | sed -e 's/install-//'`; \
893 if
[ -f .
/$${dir}/Makefile
] ; then \
895 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
896 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
904 # This is a list of inter-dependencies among modules.
907 all-binutils
: all-libiberty all-opcodes all-bfd all-flex all-byacc
909 # start-sanitize-chill
910 all-chillrt
: all-binutils all-gas all-gcc all-newlib
913 all-dejagnu
: all-tcl all-expect all-tk
914 all-diff
: all-libiberty
916 all-emacs19
: all-byacc
918 all-expect
: all-tcl all-tk
919 all-fileutils
: all-libiberty
921 all-flex
: all-libiberty all-byacc
922 all-gas
: all-libiberty all-opcodes all-bfd
925 all-gcc
: all-libiberty all-byacc all-binutils all-gas
926 all-gdb
: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim all-gcc all-ld
928 all-gprof
: all-libiberty all-bfd
929 all-grep
: all-libiberty
930 all-gui
: all-gdb all-libproc all-librx
931 all-gzip
: all-libiberty
932 all-hello
: all-libiberty
934 all-ispell
: all-emacs19
935 all-ld
: all-libiberty all-bfd all-byacc all-flex
936 all-libg
++: all-gas all-ld all-gcc all-xiberty all-newlib all-libio all-librx
937 all-libio
: all-gas all-ld all-gcc all-xiberty all-newlib
939 all-libstdc
++: all-gas all-ld all-gcc all-xiberty all-newlib all-libio
940 all-m4
: all-libiberty
941 all-make
: all-libiberty
943 all-newlib
: all-binutils all-gas all-gcc
946 all-prms
: all-libiberty
949 all-recode
: all-libiberty
950 all-sed
: all-libiberty
951 all-send-pr
: all-prms
953 all-sim
: all-libiberty all-bfd
954 all-tar
: all-libiberty
956 all-tclX
: all-tcl all-tk
958 all-texinfo
: all-libiberty
960 all-tgas
: all-libiberty all-bfd
963 all-uudecode
: all-libiberty
964 all-xiberty
: all-gcc all-ld all-newlib
966 ### other supporting targets
975 @for i in
$(MAKEDIRS
) ; do \
976 echo Making
$$i...
; \
977 parent
=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
978 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
; \
979 if
[ ! -d
$$i ] ; then \
980 if mkdir
$$i ; then \
991 dir.
info: do-install-info
992 if
[ -f
$(srcdir)/texinfo
/gen-info-dir
] ; then \
993 $(srcdir)/texinfo
/gen-info-dir
$(infodir) $(srcdir)/texinfo
/dir.info-template
> dir.
info.new
; \
994 mv
-f
dir.
info.new
dir.
info ; \
999 @echo
"Building a full distribution of this tree isn't done"
1000 @echo
"via 'make dist'. Check out the etc/ subdirectory"
1004 # Right now this just builds TAGS in each subdirectory. emacs19 has the
1005 # ability to use several tags files at once, so there is probably no need
1006 # to combine them into one big TAGS file (like CVS 1.3 does). We could
1007 # (if we felt like it) have this Makefile write a piece of elisp which
1008 # the user could load to tell emacs19 where all the TAGS files we just
1012 # with the gnu make, this is done automatically.
1014 Makefile
: Makefile.in configure.in
$(host_makefile_frag
) $(target_makefile_frag
)
1015 $(SHELL
) .
/config.status
1018 # Support for building net releases
1020 # Files in devo used in any net release.
1021 # ChangeLog omitted because it may refer to files which are not in this
1022 # distribution (perhaps it would be better to include it anyway).
1023 DEVO_SUPPORT
= README Makefile.in configure configure.in \
1024 config.guess config.sub config move-if-change \
1025 COPYING COPYING.LIB
install.sh
1027 # Files in devo/etc used in any net release.
1028 # ChangeLog omitted because it may refer to files which are not in this
1029 # distribution (perhaps it would be better to include it anyway).
1030 ETC_SUPPORT
= Makefile.in cfg-paper.texi configure.in configure.man \
1031 configure.texi standards.texi make-stds.texi
1032 ETC_SUPPORT_PFX
=configure.
info standards.
info cfg-paper.
info
1034 # When you use `make setup-dirs' or `make taz' you should always redefine
1036 SUPPORT_FILES
= list-of-support-files-for-tool-in-question
1037 # Directories that might want `make diststuff' run.
1038 DISTSTUFFDIRS
= ld gprof gdb libg
++ binutils gnats gas
1039 # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
1040 DISTBISONFILES
= binutils
/Makefile.in gas
/Makefile.in gdb
/Makefile.in
1041 # Directories where "info" should be built.
1042 DISTDOCDIRS
= ld gprof binutils gas bfd libg
++ libio gdb gnats send-pr etc
1046 taz
: $(DEVO_SUPPORT
) $(SUPPORT_FILES
) \
1047 texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1048 # Make sure "diststuff" files get built properly.
1049 for f in
$(DISTBISONFILES
) ; do \
1050 if
[ -r
$$f ]; then \
1051 sed
'/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp
; \
1055 # Take out texinfo from a few places; make simple BISON=bison line.
1056 sed
-e
'/^all\.normal: /s/\all-texinfo //' \
1057 -e
'/^ install-texinfo /d' \
1058 -e
'/^BISON = /,/^$$/d' \
1059 -e
'/^# BISON:/s/.*/BISON = bison -y/' \
1061 mv
-f tmp Makefile.in
1063 $(start-sanitize-Sanitize
)
1064 @if
[ -f .Sanitize
] ; then echo
"RUN Sanitize FIRST!" ; false
; fi
;
1065 $(end-sanitize-Sanitize
)
1067 # Doc files don't change; include them in distribution.
1068 for f in
$(DISTDOCDIRS
) ; do \
1069 if
[ -r
$$f/Makefile
]; then \
1070 (cd
$$f ; $(MAKE
) info) || exit
1 ; \
1073 # Make links, and run "make diststuff" when needed.
1074 # The `echo' for setting `p' is to convert all whitespace to spaces.
1075 # Then the `case' further below should tell whether $$d is in
1077 rm -rf proto-toplev
; mkdir proto-toplev
1078 set
-e
; dirs
="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1079 p
=" `echo $(DISTSTUFFDIRS)` " ; \
1080 for d in
$$dirs ; do \
1081 if
[ -d
$$d ]; then \
1084 echo making diststuff in
$$d ; \
1085 (cd
$$d ; pwd
; $(MAKE
) diststuff
) || exit
1 ;; \
1087 if
[ -d
$$d/proto-
$$d.
dir ]; then \
1088 ln
-s ..
/$$d/proto-
$$d.
dir proto-toplev
/$$d ; \
1090 ln
-s ..
/$$d proto-toplev
/$$d ; \
1092 else ln
-s ..
/$$d proto-toplev
/$$d ; fi
; \
1096 mkdir proto-toplev
/etc
1097 (cd proto-toplev
/etc
; \
1098 for i in
$(ETC_SUPPORT
); do \
1099 ln
-s ..
/..
/etc
/$$i .
; \
1101 for i in
$(ETC_SUPPORT_PFX
); do \
1102 ln
-s ..
/..
/etc
/$$i* .
; \
1105 # Take out texinfo and glob from configurable dirs
1106 rm proto-toplev
/configure.in
1107 sed
-e
'/^host_tools=/s/texinfo //' \
1108 -e
'/^host_libs=/s/glob //' \
1109 <configure.in
>proto-toplev
/configure.in
1111 mkdir proto-toplev
/texinfo
1112 ln
-s ..
/..
/texinfo
/texinfo.
tex proto-toplev
/texinfo
/
1113 ln
-s ..
/..
/texinfo
/gpl.texinfo proto-toplev
/texinfo
/
1114 ln
-s ..
/..
/texinfo
/lgpl.texinfo proto-toplev
/texinfo
/
1115 ln
-s ..
/..
/texinfo
/tex3patch proto-toplev
/texinfo
/
1116 chmod og
=u
`find . -print`
1117 (VER
=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
1118 echo
"==> Making $(TOOL)-$$VER.tar.gz"; \
1119 rm -f
$(TOOL
)-$$VER; ln
-s proto-toplev
$(TOOL
)-$$VER; \
1120 tar cfh
- $(TOOL
)-$$VER \
1121 |
$(GZIPPROG
) -v
-9 >$(TOOL
)-$$VER.
tar.gz
)
1123 TEXINFO_SUPPORT
= texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1124 DIST_SUPPORT
= $(DEVO_SUPPORT
) $(TEXINFO_SUPPORT
)
1127 GAS_SUPPORT_DIRS
= bfd
include libiberty opcodes
1128 gas.
tar.gz
: $(DIST_SUPPORT
) $(GAS_SUPPORT_DIRS
) gas
1129 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1130 SUPPORT_FILES
="$(GAS_SUPPORT_DIRS)"
1132 # The FSF "binutils" release includes gprof and ld.
1133 .PHONY
: binutils.
tar.gz
1134 BINUTILS_SUPPORT_DIRS
= bfd gas
include libiberty opcodes
ld gprof
1135 binutils.
tar.gz
: $(DIST_SUPPORT
) $(BINUTILS_SUPPORT_DIRS
) binutils
1136 $(MAKE
) -f Makefile.in taz TOOL
=binutils \
1137 SUPPORT_FILES
="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1139 .PHONY
: gas
+binutils.
tar.gz
1140 GASB_SUPPORT_DIRS
= $(GAS_SUPPORT_DIRS
) binutils
ld gprof
1141 gas
+binutils.
tar.gz
: $(DIST_SUPPORT
) $(GASB_SUPPORT_DIRS
) gas
1142 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1143 SUPPORT_FILES
="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1145 .PHONY
: libg
++.
tar.gz
1146 LIBGXX_SUPPORT_DIRS
=include libstdc
++ libio librx libiberty xiberty
1147 libg
++.
tar.gz
: $(DIST_SUPPORT
) libg
++
1148 $(MAKE
) -f Makefile.in taz TOOL
=libg
++ \
1149 SUPPORT_FILES
="$(LIBGXX_SUPPORT_DIRS)"
1151 GNATS_SUPPORT_DIRS
=include libiberty send-pr
1152 gnats.
tar.gz
: $(DIST_SUPPORT
) $(GNATS_SUPPORT_DIRS
) gnats
1153 $(MAKE
) -f Makefile.in taz TOOL
=gnats \
1154 SUPPORT_FILES
="$(GNATS_SUPPORT_DIRS)"
1157 GDB_SUPPORT_DIRS
= bfd glob
include libiberty mmalloc opcodes readline sim
1158 gdb.
tar.gz
: $(DIST_SUPPORT
) $(GDB_SUPPORT_DIRS
) gdb
1159 $(MAKE
) -f Makefile.in taz TOOL
=gdb \
1160 SUPPORT_FILES
="$(GDB_SUPPORT_DIRS)"
1162 .PHONY
: newlib.
tar.gz
1163 NEWLIB_SUPPORT_DIRS
=
1164 newlib.
tar.gz
: $(DIST_SUPPORT
) $(NEWLIB_SUPPORT_DIRS
) newlib
1165 $(MAKE
) -f Makefile.in taz TOOL
=newlib \
1166 SUPPORT_FILES
="$(NEWLIB_SUPPORT_DIRS)" \
1167 DEVO_SUPPORT
="$(DEVO_SUPPORT) COPYING.NEWLIB" \
1168 DISTDOCDIRS
="$(DISTDOCDIRS) newlib"
1173 # start-sanitize-chill
1174 ## This is ugly, but I don't want GNU make to put these variables in
1175 ## the environment. Older makes will see this as a set of targets
1176 ## with no dependencies and no actions.
1177 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET
:
1178 # end-sanitize-chill
1180 # end of Makefile.in