2 # Makefile for directory with subdirs to build.
3 # Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
5 # This file is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
24 exec_prefix = $(prefix)
25 bindir = $(exec_prefix)/bin
26 libdir = $(exec_prefix)/lib
27 tooldir
= $(exec_prefix)/$(target
)
29 program_transform_name
=
31 datadir = $(prefix)/lib
32 mandir = $(prefix)/man
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
42 infodir = $(prefix)/info
43 includedir = $(prefix)/include
44 docdir
= $(datadir)/doc
48 INSTALL
= $${srcroot}/install.sh
-c
49 INSTALL_PROGRAM
= $(INSTALL
)
50 INSTALL_DATA
= $(INSTALL
) -m
644
51 INSTALL_XFORM
= $(INSTALL
) -t
='$(program_transform_name)'
53 INSTALL_DOSREL
= install-dosrel-fake
60 # Special variables passed down in EXTRA_GCC_FLAGS. They are defined
61 # here so that they can be overridden by Makefile fragments.
62 HOST_CC
= $(CC_FOR_BUILD
)
64 HOST_PREFIX_1
= loser-
66 # We don't specify -g -O because many compilers don't support -g -O,
67 # and/or -O is broken in and of itself.
70 # start-sanitize-chill
71 CHILLFLAGS
= $(CFLAGS
)
76 # Use -O2 to stress test the compiler.
77 CXXFLAGS
= -g
-O2
-fno-implicit-templates
81 # Not plain GZIP, since gzip looks there for extra command-line options.
84 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
85 BISON
= `if [ -f $$r/byacc/byacc ] ; \
86 then echo $$r/byacc/byacc ; \
90 LEX
= `if [ -f $$r/flex/flex ] ; \
91 then echo $$r/flex/flex ; \
94 M4
= `if [ -f $$r/m4/m4 ] ; \
95 then echo $$r/m4/m4 ; \
98 MAKEINFO
= `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
99 then echo $$r/texinfo/makeinfo/makeinfo ; \
100 else echo makeinfo ; fi`
102 # This just becomes part of the MAKEINFO definition passed down to
103 # sub-makes. It lets flags be given on the command line while still
104 # using the makeinfo from the object tree.
107 EXPECT
= `if [ -f $$r/expect/expect ] ; \
108 then echo $$r/expect/expect ; \
109 else echo expect ; fi`
111 RUNTEST
= `if [ -f $${srcroot}/dejagnu/runtest ] ; \
112 then echo $${srcroot}/dejagnu/runtest ; \
113 else echo runtest ; fi`
116 # libraries that may need to be augmented on a system-by-system basis
119 # compilers to use to create programs which must be run in the build
122 CXX_FOR_BUILD
= $(CXX
)
124 SUBDIRS
= "this is set via configure, don't edit this"
128 INSTALL_TARGET
= install-dirs \
130 $(INSTALL_TARGET_MODULES
) \
131 $(INSTALL_X11_MODULES
) \
137 if [ -f $$r/gcc/Makefile ] ; then \
138 if [ -f $$r/newlib/Makefile ] ; then \
139 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
141 echo $$r/gcc/xgcc -B$$r/gcc/; \
144 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
147 t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
151 # start-sanitize-chill
152 CHILL_FOR_TARGET
= ` \
153 if [ -f $$r/gcc/Makefile ] ; then \
154 echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/chillrt/; \
156 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
159 t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
166 if [ -f $$r/gcc/Makefile ] ; then \
167 if [ -f $$r/newlib/Makefile ] ; then \
168 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
170 echo $$r/gcc/xgcc -B$$r/gcc/; \
173 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
176 t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
181 if [ -f $$r/gas/Makefile ] ; then \
182 echo $$r/gas/as.new ; \
184 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
187 t='$(program_transform_name)'; echo as | sed -e 's/brokensed/brokensed/' $$t ; \
192 if [ -f $$r/binutils/ar ] ; then \
193 echo $$r/binutils/ar ; \
195 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
198 t='$(program_transform_name)'; echo ar | sed -e 's/brokensed/brokensed/' $$t ; \
202 RANLIB_FOR_TARGET
= ` \
203 if [ -f $$r/binutils/ranlib ] ; then \
204 echo $$r/binutils/ranlib ; \
206 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
209 t='$(program_transform_name)'; echo ranlib | sed -e 's/brokensed/brokensed/' $$t ; \
214 if [ -f $$r/binutils/Makefile ] ; then \
215 echo $$r/binutils/nm.new ; \
217 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
220 t='$(program_transform_name)'; echo nm | sed -e 's/brokensed/brokensed/' $$t ; \
225 #### host and target specific makefile fragments come in here.
228 # Flags to pass down to all sub-makes.
229 # Please keep these in alphabetical order.
230 BASE_FLAGS_TO_PASS
= \
231 "AR_FLAGS=$(AR_FLAGS)" \
232 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
233 "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
235 "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
236 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
238 $(start-sanitize-chill
)\
239 "CHILLFLAGS=$(CHILLFLAGS)" \
240 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
241 "CHILL_LIB=$(CHILL_LIB)" \
242 $(end-sanitize-chill
)\
243 "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
244 "CXXFLAGS=$(CXXFLAGS)" \
245 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
246 "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
247 "INSTALL=$(INSTALL)" \
248 "INSTALL_DATA=$(INSTALL_DATA)" \
249 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
250 "INSTALL_XFORM=$(INSTALL_XFORM)" \
251 "LDFLAGS=$(LDFLAGS)" \
254 "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
255 "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
256 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
259 "RUNTEST=$(RUNTEST)" \
260 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
262 "exec_prefix=$(exec_prefix)" \
266 # Flags to pass down to most sub-makes, in which we're building with
267 # the host environment.
268 # If any variables are added here, they must be added to do-*, below.
277 FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_HOST_FLAGS
)
279 # Flags that are concerned with the location of the X11 include files
281 X11_FLAGS_TO_PASS
= \
282 "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
283 "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
286 # Flags to pass down to makes which are built with the target environment.
287 # The double $ decreases the length of the command line; the variables
288 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
289 # If any variables are added here, they must be added to do-*, below.
290 EXTRA_TARGET_FLAGS
= \
291 'AR=$$(AR_FOR_TARGET)' \
292 'AS=$$(AS_FOR_TARGET)' \
293 'CC=$$(CC_FOR_TARGET)' \
294 'CXX=$$(CXX_FOR_TARGET)' \
295 'NM=$$(NM_FOR_TARGET)' \
296 'RANLIB=$$(RANLIB_FOR_TARGET)'
298 TARGET_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_TARGET_FLAGS
)
300 # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
301 # unfortunately needs the native compiler and the target ar and
303 # If any variables are added here, they must be added to do-*, below.
304 # The HOST_* variables are a special case, which are used for the gcc
305 # cross-building scheme.
307 'AR=$$(AR_FOR_TARGET)' \
311 'HOST_CC=$(CC_FOR_BUILD)' \
312 'HOST_PREFIX=$(HOST_PREFIX)' \
313 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
315 'RANLIB=$$(RANLIB_FOR_TARGET)'
317 GCC_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_GCC_FLAGS
)
319 # This is a list of the targets for all of the modules which are compiled
320 # using $(FLAGS_TO_PASS).
369 # This is a list of the check targets for all of the modules which are
370 # compiled using $(FLAGS_TO_PASS).
371 # This is a list of the check targets for all of the modules which are
372 # compiled using $(FLAGS_TO_PASS).
374 # The list is in two parts. The first lists those tools which
375 # are tested as part of the host's native tool-chain, and not
376 # tested in a cross configuration.
377 NATIVE_CHECK_MODULES
= \
381 CROSS_CHECK_MODULES
= \
425 CHECK_MODULES
=$(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
427 # This is a list of the install targets for all of the modules which are
428 # compiled using $(FLAGS_TO_PASS).
477 # This is a list of the targets for all of the modules which are compiled
478 # using $(X11_FLAGS_TO_PASS).
487 # This is a list of the check targets for all of the modules which are
488 # compiled using $(X11_FLAGS_TO_PASS).
489 CHECK_X11_MODULES
= \
496 # This is a list of the install targets for all the modules which are
497 # compiled using $(X11_FLAGS_TO_PASS).
498 INSTALL_X11_MODULES
= \
506 # This is a list of the targets for all of the modules which are compiled
507 # using $(TARGET_FLAGS_TO_PASS).
508 ALL_TARGET_MODULES
= \
509 $(start-sanitize-chill
) \
511 $(end-sanitize-chill
) \
520 # This is a list of the check targets for all of the modules which are
521 # compiled using $(TARGET_FLAGS_TO_PASS).
522 CHECK_TARGET_MODULES
= \
523 $(start-sanitize-chill
) \
525 $(end-sanitize-chill
) \
532 # This is a list of the install targets for all of the modules which are
533 # compiled using $(TARGET_FLAGS_TO_PASS).
534 INSTALL_TARGET_MODULES
= \
535 $(start-sanitize-chill
) \
537 $(end-sanitize-chill
) \
545 # This is a shell case of all modules which are compiled using
546 # $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
547 TARGET_LIBS
= libio | libstdc
++ | librx | libg
++ | newlib | xiberty
548 # start-sanitize-chill
549 TARGET_LIBS
= chillrt | libio | libstdc
++ | librx | libg
++ | newlib | xiberty
552 # The first rule in the file had better be this one. Don't put any above it.
556 # The target built for a native build.
560 $(ALL_TARGET_MODULES
) \
564 # Do a target for all the subdirectories. A ``make do-X'' will do a
565 # ``make X'' in all subdirectories (because, in general, there is a
566 # dependency (below) of X upon do-X, a ``make X'' will also do this,
567 # but it may do additional work as well).
568 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
569 # because it is so large that it can easily overflow the command line
570 # length limit on some systems.
583 @target
=`echo $@ | sed -e 's/^do-//'`; \
585 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
586 for i in
$(SUBDIRS
); do \
587 if
[ -f .
/$$i/Makefile
]; then \
590 for flag in
$(EXTRA_TARGET_FLAGS
); do \
591 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
595 for flag in
$(EXTRA_GCC_FLAGS
); do \
596 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
600 for flag in
$(EXTRA_HOST_FLAGS
); do \
601 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
605 export AR AS CC CXX NM RANLIB
; \
607 $(MAKE
) $(BASE_FLAGS_TO_PASS
) "AR=$${AR}" "AS=$${AS}" \
608 "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
609 "RANLIB=$${RANLIB}" \
611 then true
; else exit
1; fi
; \
615 # Here are the targets which correspond to the do-X targets.
617 .PHONY
: info installcheck dvi install-info
618 .PHONY
: clean distclean mostlyclean realclean local-clean local-distclean
620 installcheck: do-installcheck
623 install-info
: do-install-info
dir.
info
624 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
625 if
[ -f
dir.
info ] ; then \
626 $(INSTALL_DATA
) dir.
info $(infodir)/dir.
info ; \
630 -rm -f
*.a TEMP errs core
*.o
*~ \
#* TAGS *.E
633 -rm -f Makefile config.status
635 clean: do-clean local-clean
636 mostlyclean: do-mostlyclean local-clean
637 distclean: do-distclean local-clean local-distclean
638 realclean: do-realclean local-clean local-distclean
643 check: $(CHECK_MODULES
) \
644 $(CHECK_TARGET_MODULES
) \
645 $(CHECK_X11_MODULES
) \
648 # Installation targets.
650 .PHONY
: install uninstall vault-install
651 install: $(INSTALL_TARGET
)
654 @echo
"the uninstall target is not supported in this tree"
657 @if
[ -f .
/release
/vault-install
] ; then \
658 .
/release
/vault-install
$(host_alias
) $(target_alias
) ; \
664 install.
all: install-no-fixedincludes
665 @if
[ -f .
/gcc
/Makefile
] ; then \
666 r
=`pwd` ; export r
; \
668 $(MAKE
) $(FLAGS_TO_PASS
) install-headers
) ; \
673 # install-no-fixedincludes is used because Cygnus can not distribute
674 # the fixed header files.
675 .PHONY
: install-no-fixedincludes
676 install-no-fixedincludes
: \
679 $(INSTALL_TARGET_MODULES
) \
680 $(INSTALL_X11_MODULES
) \
683 # Install the gcc headers files, but not the fixed include files,
684 # which Cygnus is not allowed to distribute. This rule is very
685 # dependent on the workings of the gcc Makefile.in.
686 .PHONY
: gcc-no-fixedincludes
687 gcc-no-fixedincludes
:
688 @if
[ -f .
/gcc
/Makefile
]; then \
689 rm -rf gcc
/tmp-include
; \
690 mv gcc
/include gcc
/tmp-include
2>/dev
/null
; \
692 cp
$(srcdir)/gcc
/gsyslimits.h gcc
/include/syslimits.h
; \
693 touch gcc
/stmp-fixinc gcc
/include/fixed
; \
694 rm -f gcc
/stmp-headers gcc
/stmp-int-hdrs
; \
696 srcroot
=`cd $(srcdir); pwd` ; export srcroot
; \
698 $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
699 rm -rf gcc
/include; \
700 mv gcc
/tmp-include gcc
/include 2>/dev
/null
; \
703 # This rule is used to build the modules which use FLAGS_TO_PASS. To
704 # build a target all-X means to cd to X and make all.
705 # all-glob is handled specially because it doesn't actually build.
707 # all-gui, and all-libproc are handled specially because
708 # they are still experimental, and if they fail to build, that
709 # shouldn't stop "make all".
710 .PHONY
: $(ALL_MODULES
) all-glob all-gui all-libproc
711 $(ALL_MODULES
) all-glob all-gui all-libproc
:
712 @
dir=`echo $@ | sed -e 's/all-//'`; \
713 if
[ -f .
/$${dir}/Makefile
] ; then \
715 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
716 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) all); \
721 # These rules are used to check the modules which use FLAGS_TO_PASS.
722 # To build a target check-X means to cd to X and make check. Some
723 # modules are only tested in a native toolchain.
725 .PHONY
: $(CHECK_MODULES
) $(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
726 $(NATIVE_CHECK_MODULES
):
727 @if
[ "$(host_canonical)" = "$(target_canonical)" ] ; then \
728 dir=`echo $@ | sed -e 's/check-//'`; \
729 if
[ -f .
/$${dir}/Makefile
] ; then \
731 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
732 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
738 $(CROSS_CHECK_MODULES
):
739 @
dir=`echo $@ | sed -e 's/check-//'`; \
740 if
[ -f .
/$${dir}/Makefile
] ; then \
742 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
743 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
748 # This rule is used to install the modules which use FLAGS_TO_PASS.
749 # To build a target install-X means to cd to X and make install.
750 .PHONY
: $(INSTALL_MODULES
)
751 $(INSTALL_MODULES
): install-dirs
752 @
dir=`echo $@ | sed -e 's/install-//'`; \
753 if
[ -f .
/$${dir}/Makefile
] ; then \
755 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
756 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
761 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
762 # To build a target all-X means to cd to X and make all.
763 .PHONY
: $(ALL_TARGET_MODULES
)
764 $(ALL_TARGET_MODULES
):
765 @
dir=`echo $@ | sed -e 's/all-//'`; \
766 if
[ -f .
/$${dir}/Makefile
] ; then \
768 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
769 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) all); \
774 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
775 # To build a target install-X means to cd to X and make install.
776 .PHONY
: $(CHECK_TARGET_MODULES
)
777 $(CHECK_TARGET_MODULES
):
778 @
dir=`echo $@ | sed -e 's/check-//'`; \
779 if
[ -f .
/$${dir}/Makefile
] ; then \
781 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
782 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check); \
787 # This rule is used to install the modules which use
788 # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
790 .PHONY
: $(INSTALL_TARGET_MODULES
)
791 $(INSTALL_TARGET_MODULES
): install-dirs
792 @
dir=`echo $@ | sed -e 's/install-//'`; \
793 if
[ -f .
/$${dir}/Makefile
] ; then \
795 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
796 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) install); \
801 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
802 # To build a target all-X means to cd to X and make all.
803 .PHONY
: $(ALL_X11_MODULES
)
805 @
dir=`echo $@ | sed -e 's/all-//'`; \
806 if
[ -f .
/$${dir}/Makefile
] ; then \
808 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
810 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) all); \
815 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
816 # To build a target check-X means to cd to X and make all.
817 .PHONY
: $(CHECK_X11_MODULES
)
818 $(CHECK_X11_MODULES
):
819 @
dir=`echo $@ | sed -e 's/check-//'`; \
820 if
[ -f .
/$${dir}/Makefile
] ; then \
822 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
824 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) check); \
829 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
830 # To build a target install-X means to cd to X and make install.
831 .PHONY
: $(INSTALL_X11_MODULES
)
832 $(INSTALL_X11_MODULES
):
833 @
dir=`echo $@ | sed -e 's/install-//'`; \
834 if
[ -f .
/$${dir}/Makefile
] ; then \
836 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
838 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) install); \
843 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
846 @if
[ -f .
/gcc
/Makefile
] ; then \
848 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
849 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) all); \
856 @if
[ -f .
/gcc
/Makefile
] ; then \
858 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
859 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) check); \
866 @if
[ -f .
/gcc
/Makefile
] ; then \
868 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
869 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
876 # This rule is used to install the modules which use FLAGS_TO_PASS.
877 # To build a target install-X means to cd to X and make install.
878 .PHONY
: install-dosrel
879 install-dosrel
: install-dirs
info
880 @
dir=`echo $@ | sed -e 's/install-//'`; \
881 if
[ -f .
/$${dir}/Makefile
] ; then \
883 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
884 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
892 # This is a list of inter-dependencies among modules.
895 all-binutils
: all-libiberty all-opcodes all-bfd all-flex all-byacc
897 # start-sanitize-chill
898 all-chillrt
: all-binutils all-gas all-gcc all-newlib
901 all-dejagnu
: all-tcl all-expect all-tk
902 all-diff
: all-libiberty
904 all-emacs19
: all-byacc
906 all-expect
: all-tcl all-tk
907 all-fileutils
: all-libiberty
909 all-flex
: all-libiberty all-byacc
910 all-gas
: all-libiberty all-opcodes all-bfd
913 all-gcc
: all-libiberty all-byacc all-binutils all-gas all-pagas
914 all-gdb
: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim all-gcc all-ld
916 all-gprof
: all-libiberty all-bfd
917 all-grep
: all-libiberty
918 all-gui
: all-gdb all-libproc all-librx
919 all-gzip
: all-libiberty
920 all-hello
: all-libiberty
922 all-ispell
: all-emacs
# all-emacs19 ??? is this needed?
923 all-ld
: all-libiberty all-bfd all-byacc all-flex
924 all-libg
++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib \
926 all-libio
: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib
928 all-libstdc
++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib \
930 all-m4
: all-libiberty
931 all-make
: all-libiberty
933 all-newlib
: all-binutils all-gas all-pagas all-gcc
936 all-prms
: all-libiberty
939 all-recode
: all-libiberty
940 all-sed
: all-libiberty
941 all-send-pr
: all-prms
943 all-sim
: all-libiberty all-bfd
944 all-tar
: all-libiberty
946 all-tclX
: all-tcl all-tk
948 all-texinfo
: all-libiberty
950 all-tgas
: all-libiberty all-bfd
953 all-uudecode
: all-libiberty
954 all-xiberty
: all-gcc all-ld all-newlib
956 ### other supporting targets
965 @for i in
$(MAKEDIRS
) ; do \
966 echo Making
$$i...
; \
967 parent
=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
968 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
; \
969 if
[ ! -d
$$i ] ; then \
970 if mkdir
$$i ; then \
981 dir.
info: do-install-info
982 if
[ -f
$(srcdir)/texinfo
/gen-info-dir
] ; then \
983 $(srcdir)/texinfo
/gen-info-dir
$(infodir) $(srcdir)/texinfo
/dir.info-template
> dir.
info.new
; \
984 mv
-f
dir.
info.new
dir.
info ; \
989 @echo
"Building a full distribution of this tree isn't done"
990 @echo
"via 'make dist'. Check out the etc/ subdirectory"
994 # Right now this just builds TAGS in each subdirectory. emacs19 has the
995 # ability to use several tags files at once, so there is probably no need
996 # to combine them into one big TAGS file (like CVS 1.3 does). We could
997 # (if we felt like it) have this Makefile write a piece of elisp which
998 # the user could load to tell emacs19 where all the TAGS files we just
1002 # with the gnu make, this is done automatically.
1004 Makefile
: Makefile.in configure.in
$(host_makefile_frag
) $(target_makefile_frag
)
1005 $(SHELL
) .
/config.status
1008 # Support for building net releases
1010 # Files in devo used in any net release.
1011 # ChangeLog omitted because it may refer to files which are not in this
1012 # distribution (perhaps it would be better to include it anyway).
1013 DEVO_SUPPORT
= README Makefile.in configure configure.in \
1014 config.guess config.sub config move-if-change \
1015 COPYING COPYING.LIB
install.sh
1017 # Files in devo/etc used in any net release.
1018 # ChangeLog omitted because it may refer to files which are not in this
1019 # distribution (perhaps it would be better to include it anyway).
1020 ETC_SUPPORT
= Makefile.in cfg-paper.texi configure.in configure.man \
1021 configure.texi standards.texi make-stds.texi
1022 ETC_SUPPORT_PFX
=configure.
info standards.
info cfg-paper.
info
1024 # When you use `make setup-dirs' or `make taz' you should always redefine
1026 SUPPORT_FILES
= list-of-support-files-for-tool-in-question
1027 # Directories that might want `make diststuff' run.
1028 DISTSTUFFDIRS
= ld gprof gdb libg
++ binutils gnats gas
1029 # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
1030 DISTBISONFILES
= binutils
/Makefile.in gas
/Makefile.in gdb
/Makefile.in
1031 # Directories where "info" should be built.
1032 DISTDOCDIRS
= ld gprof binutils gas bfd libg
++ libio gdb gnats send-pr etc
1036 taz
: $(DEVO_SUPPORT
) $(SUPPORT_FILES
) \
1037 texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1038 # Make sure "diststuff" files get built properly.
1039 for f in
$(DISTBISONFILES
) ; do \
1040 if
[ -r
$$f ]; then \
1041 sed
'/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp
; \
1045 # Take out texinfo from a few places; make simple BISON=bison line.
1046 sed
-e
'/^all\.normal: /s/\all-texinfo //' \
1047 -e
'/^ install-texinfo /d' \
1048 -e
'/^BISON = /,/^$$/d' \
1049 -e
'/^# BISON:/s/.*/BISON = bison -y/' \
1051 mv
-f tmp Makefile.in
1053 $(start-sanitize-Sanitize
)
1054 @if
[ -f .Sanitize
] ; then echo
"RUN Sanitize FIRST!" ; false
; fi
;
1055 $(end-sanitize-Sanitize
)
1057 # Doc files don't change; include them in distribution.
1058 for f in
$(DISTDOCDIRS
) ; do \
1059 if
[ -r
$$f/Makefile
]; then \
1060 (cd
$$f ; $(MAKE
) info) || exit
1 ; \
1063 # Make links, and run "make diststuff" when needed.
1064 # The `echo' for setting `p' is to convert all whitespace to spaces.
1065 # Then the `case' further below should tell whether $$d is in
1067 rm -rf proto-toplev
; mkdir proto-toplev
1068 set
-e
; dirs
="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1069 p
=" `echo $(DISTSTUFFDIRS)` " ; \
1070 for d in
$$dirs ; do \
1071 if
[ -d
$$d ]; then \
1074 echo making diststuff in
$$d ; \
1075 (cd
$$d ; pwd
; $(MAKE
) diststuff
) || exit
1 ;; \
1077 if
[ -d
$$d/proto-
$$d.
dir ]; then \
1078 ln
-s ..
/$$d/proto-
$$d.
dir proto-toplev
/$$d ; \
1080 ln
-s ..
/$$d proto-toplev
/$$d ; \
1082 else ln
-s ..
/$$d proto-toplev
/$$d ; fi
; \
1086 mkdir proto-toplev
/etc
1087 (cd proto-toplev
/etc
; \
1088 for i in
$(ETC_SUPPORT
); do \
1089 ln
-s ..
/..
/etc
/$$i .
; \
1091 for i in
$(ETC_SUPPORT_PFX
); do \
1092 ln
-s ..
/..
/etc
/$$i* .
; \
1095 # Take out texinfo and glob from configurable dirs
1096 rm proto-toplev
/configure.in
1097 sed
-e
'/^host_tools=/s/texinfo //' \
1098 -e
'/^host_libs=/s/glob //' \
1099 <configure.in
>proto-toplev
/configure.in
1101 mkdir proto-toplev
/texinfo
1102 ln
-s ..
/..
/texinfo
/texinfo.
tex proto-toplev
/texinfo
/
1103 ln
-s ..
/..
/texinfo
/gpl.texinfo proto-toplev
/texinfo
/
1104 ln
-s ..
/..
/texinfo
/lgpl.texinfo proto-toplev
/texinfo
/
1105 ln
-s ..
/..
/texinfo
/tex3patch proto-toplev
/texinfo
/
1106 chmod og
=u
`find . -print`
1107 (VER
=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
1108 echo
"==> Making $(TOOL)-$$VER.tar.gz"; \
1109 rm -f
$(TOOL
)-$$VER; ln
-s proto-toplev
$(TOOL
)-$$VER; \
1110 tar cfh
- $(TOOL
)-$$VER \
1111 |
$(GZIPPROG
) -v
-9 >$(TOOL
)-$$VER.
tar.gz
)
1113 TEXINFO_SUPPORT
= texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1114 DIST_SUPPORT
= $(DEVO_SUPPORT
) $(TEXINFO_SUPPORT
)
1117 GAS_SUPPORT_DIRS
= bfd
include libiberty opcodes
1118 gas.
tar.gz
: $(DIST_SUPPORT
) $(GAS_SUPPORT_DIRS
) gas
1119 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1120 SUPPORT_FILES
="$(GAS_SUPPORT_DIRS)"
1122 # The FSF "binutils" release includes gprof and ld.
1123 .PHONY
: binutils.
tar.gz
1124 BINUTILS_SUPPORT_DIRS
= bfd gas
include libiberty opcodes
ld gprof
1125 binutils.
tar.gz
: $(DIST_SUPPORT
) $(BINUTILS_SUPPORT_DIRS
) binutils
1126 $(MAKE
) -f Makefile.in taz TOOL
=binutils \
1127 SUPPORT_FILES
="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1129 .PHONY
: gas
+binutils.
tar.gz
1130 GASB_SUPPORT_DIRS
= $(GAS_SUPPORT_DIRS
) binutils
ld gprof
1131 gas
+binutils.
tar.gz
: $(DIST_SUPPORT
) $(GASB_SUPPORT_DIRS
) gas
1132 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1133 SUPPORT_FILES
="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1135 .PHONY
: libg
++.
tar.gz
1136 LIBGXX_SUPPORT_DIRS
=include libio librx libiberty xiberty
1137 libg
++.
tar.gz
: $(DIST_SUPPORT
) libg
++
1138 $(MAKE
) -f Makefile.in taz TOOL
=libg
++ \
1139 SUPPORT_FILES
="$(LIBGXX_SUPPORT_DIRS)"
1141 GNATS_SUPPORT_DIRS
=include libiberty send-pr
1142 gnats.
tar.gz
: $(DIST_SUPPORT
) $(GNATS_SUPPORT_DIRS
) gnats
1143 $(MAKE
) -f Makefile.in taz TOOL
=gnats \
1144 SUPPORT_FILES
="$(GNATS_SUPPORT_DIRS)"
1147 GDB_SUPPORT_DIRS
= bfd glob
include libiberty mmalloc opcodes readline sim
1148 gdb.
tar.gz
: $(DIST_SUPPORT
) $(GDB_SUPPORT_DIRS
) gdb
1149 $(MAKE
) -f Makefile.in taz TOOL
=gdb \
1150 SUPPORT_FILES
="$(GDB_SUPPORT_DIRS)"
1152 .PHONY
: newlib.
tar.gz
1153 NEWLIB_SUPPORT_DIRS
=
1154 newlib.
tar.gz
: $(DIST_SUPPORT
) $(NEWLIB_SUPPORT_DIRS
) newlib
1155 $(MAKE
) -f Makefile.in taz TOOL
=newlib \
1156 SUPPORT_FILES
="$(NEWLIB_SUPPORT_DIRS)" \
1157 DEVO_SUPPORT
="$(DEVO_SUPPORT) COPYING.NEWLIB" \
1158 DISTDOCDIRS
="$(DISTDOCDIRS) newlib"
1163 # start-sanitize-chill
1164 ## This is ugly, but I don't want GNU make to put these variables in
1165 ## the environment. Older makes will see this as a set of targets
1166 ## with no dependencies and no actions.
1167 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET
:
1168 # end-sanitize-chill
1170 # end of Makefile.in