2 # Makefile for directory with subdirs to build.
3 # Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
5 # This file is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
24 exec_prefix = $(prefix)
25 bindir = $(exec_prefix)/bin
26 libdir = $(exec_prefix)/lib
27 tooldir
= $(exec_prefix)/$(target
)
29 program_transform_name
=
31 datadir = $(prefix)/lib
32 mandir = $(prefix)/man
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
42 infodir = $(prefix)/info
43 includedir = $(prefix)/include
44 docdir
= $(datadir)/doc
49 INSTALL
= $${srcroot}/install.sh
-c
50 INSTALL_PROGRAM
= $(INSTALL
)
51 INSTALL_DATA
= $(INSTALL
) -m
644
52 INSTALL_XFORM
= $(INSTALL
) -t
='$(program_transform_name)'
54 INSTALL_DOSREL
= install-dosrel-fake
61 # Special variables passed down in EXTRA_GCC_FLAGS. They are defined
62 # here so that they can be overridden by Makefile fragments.
63 HOST_CC
= $(CC_FOR_BUILD
)
65 HOST_PREFIX_1
= loser-
67 # We don't specify -g -O because many compilers don't support -g -O,
68 # and/or -O is broken in and of itself.
71 CFLAGS_FOR_TARGET
= $(CFLAGS
)
72 LIBCFLAGS_FOR_TARGET
= $(CFLAGS_FOR_TARGET
)
76 # start-sanitize-chill
77 CHILLFLAGS
= $(CFLAGS
)
82 # Use -O2 to stress test the compiler.
84 LIBCXXFLAGS
= $(CXXFLAGS
) -fno-implicit-templates
85 CXXFLAGS_FOR_TARGET
= $(CXXFLAGS
)
86 LIBCXXFLAGS_FOR_TARGET
= $(CXXFLAGS_FOR_TARGET
) -fno-implicit-templates
90 # Not plain GZIP, since gzip looks there for extra command-line options.
93 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
94 BISON
= `if [ -f $$r/byacc/byacc ] ; \
95 then echo $$r/byacc/byacc ; \
99 LEX
= `if [ -f $$r/flex/flex ] ; \
100 then echo $$r/flex/flex ; \
103 M4
= `if [ -f $$r/m4/m4 ] ; \
104 then echo $$r/m4/m4 ; \
107 MAKEINFO
= `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
108 then echo $$r/texinfo/makeinfo/makeinfo ; \
109 else echo makeinfo ; fi`
111 # This just becomes part of the MAKEINFO definition passed down to
112 # sub-makes. It lets flags be given on the command line while still
113 # using the makeinfo from the object tree.
116 EXPECT
= `if [ -f $$r/expect/expect ] ; \
117 then echo $$r/expect/expect ; \
118 else echo expect ; fi`
120 RUNTEST
= `if [ -f $${srcroot}/dejagnu/runtest ] ; \
121 then echo $${srcroot}/dejagnu/runtest ; \
122 else echo runtest ; fi`
125 # libraries that may need to be augmented on a system-by-system basis
128 # compilers to use to create programs which must be run in the build
131 CXX_FOR_BUILD
= $(CXX
)
133 SUBDIRS
= "this is set via configure, don't edit this"
136 # This is set by the configure script to the list of directories which
137 # should be built using the target tools.
138 TARGET_CONFIGDIRS
= xiberty libgloss newlib libio librx libstdc
++ libg
++
140 # This is set by the configure script to the arguments passed to configure.
144 INSTALL_TARGET
= install-dirs \
146 $(INSTALL_TARGET_MODULES
) \
147 $(INSTALL_X11_MODULES
) \
153 if [ -f $$r/gcc/Makefile ] ; then \
154 if [ -f $$r/newlib/Makefile ] ; then \
155 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
157 echo $$r/gcc/xgcc -B$$r/gcc/; \
160 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
163 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
167 # start-sanitize-chill
168 CHILL_FOR_TARGET
= ` \
169 if [ -f $$r/gcc/Makefile ] ; then \
170 echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
172 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
175 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
182 if [ -f $$r/gcc/Makefile ] ; then \
183 if [ -f $$r/newlib/Makefile ] ; then \
184 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
186 echo $$r/gcc/xgcc -B$$r/gcc/; \
189 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
192 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
197 if [ -f $$r/gas/as.new ] ; then \
198 echo $$r/gas/as.new ; \
200 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
203 t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
207 DLLTOOL_FOR_TARGET
= ` \
208 if [ -f $$r/binutils/dlltool ] ; then \
209 echo $$r/binutils/dlltool ; \
211 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
214 t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
219 if [ -f $$r/binutils/ar ] ; then \
220 echo $$r/binutils/ar ; \
222 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
225 t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
229 RANLIB_FOR_TARGET
= ` \
230 if [ -f $$r/binutils/ranlib ] ; then \
231 echo $$r/binutils/ranlib ; \
233 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
236 t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
241 if [ -f $$r/binutils/nm.new ] ; then \
242 echo $$r/binutils/nm.new ; \
244 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
247 t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
251 #### host and target specific makefile fragments come in here.
254 # Flags to pass down to all sub-makes.
255 # Please keep these in alphabetical order.
256 BASE_FLAGS_TO_PASS
= \
257 "AR_FLAGS=$(AR_FLAGS)" \
258 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
259 "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
261 "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
262 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
264 "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
265 $(start-sanitize-chill
)\
266 "CHILLFLAGS=$(CHILLFLAGS)" \
267 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
268 "CHILL_LIB=$(CHILL_LIB)" \
269 $(end-sanitize-chill
)\
270 "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
271 "CXXFLAGS=$(CXXFLAGS)" \
272 "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
273 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
274 "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
275 "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
276 "INSTALL=$(INSTALL)" \
277 "INSTALL_DATA=$(INSTALL_DATA)" \
278 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
279 "INSTALL_XFORM=$(INSTALL_XFORM)" \
280 "LDFLAGS=$(LDFLAGS)" \
282 "LIBCFLAGS=$(LIBCFLAGS)" \
283 "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
284 "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
285 "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
287 "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
288 "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
289 "PICFLAG=$(PICFLAG)" \
290 "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
291 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
294 "RUNTEST=$(RUNTEST)" \
295 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
297 "exec_prefix=$(exec_prefix)" \
301 # Flags to pass down to most sub-makes, in which we're building with
302 # the host environment.
303 # If any variables are added here, they must be added to do-*, below.
312 FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_HOST_FLAGS
)
314 # Flags that are concerned with the location of the X11 include files
316 X11_FLAGS_TO_PASS
= \
317 "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
318 "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
321 # Flags to pass down to makes which are built with the target environment.
322 # The double $ decreases the length of the command line; the variables
323 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
324 # If any variables are added here, they must be added to do-*, below.
325 EXTRA_TARGET_FLAGS
= \
326 'AR=$$(AR_FOR_TARGET)' \
327 'AS=$$(AS_FOR_TARGET)' \
328 'CC=$$(CC_FOR_TARGET)' \
329 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
330 'CXX=$$(CXX_FOR_TARGET)' \
331 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
332 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
333 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
334 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
335 'NM=$$(NM_FOR_TARGET)' \
336 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
337 'RANLIB=$$(RANLIB_FOR_TARGET)'
339 TARGET_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_TARGET_FLAGS
)
341 # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
342 # unfortunately needs the native compiler and the target ar and
344 # If any variables are added here, they must be added to do-*, below.
345 # The HOST_* variables are a special case, which are used for the gcc
346 # cross-building scheme.
348 'AR=$$(AR_FOR_TARGET)' \
352 'HOST_CC=$(CC_FOR_BUILD)' \
353 'HOST_PREFIX=$(HOST_PREFIX)' \
354 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
356 'RANLIB=$$(RANLIB_FOR_TARGET)'
358 GCC_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_GCC_FLAGS
)
360 # This is a list of the targets for all of the modules which are compiled
361 # using $(FLAGS_TO_PASS).
408 # This is a list of the check targets for all of the modules which are
409 # compiled using $(FLAGS_TO_PASS).
410 # This is a list of the check targets for all of the modules which are
411 # compiled using $(FLAGS_TO_PASS).
413 # The list is in two parts. The first lists those tools which
414 # are tested as part of the host's native tool-chain, and not
415 # tested in a cross configuration.
416 NATIVE_CHECK_MODULES
= \
420 CROSS_CHECK_MODULES
= \
462 CHECK_MODULES
=$(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
464 # This is a list of the install targets for all of the modules which are
465 # compiled using $(FLAGS_TO_PASS).
511 # This is a list of the targets for all of the modules which are compiled
512 # using $(X11_FLAGS_TO_PASS).
522 # This is a list of the check targets for all of the modules which are
523 # compiled using $(X11_FLAGS_TO_PASS).
524 CHECK_X11_MODULES
= \
532 # This is a list of the install targets for all the modules which are
533 # compiled using $(X11_FLAGS_TO_PASS).
534 INSTALL_X11_MODULES
= \
543 # This is a list of the targets for all of the modules which are compiled
544 # using $(TARGET_FLAGS_TO_PASS).
545 ALL_TARGET_MODULES
= \
554 # This is a list of the configure targets for all of the modules which
555 # are compiled using the target tools.
556 CONFIGURE_TARGET_MODULES
= \
558 configure-libstdc
++ \
565 # This is a list of the check targets for all of the modules which are
566 # compiled using $(TARGET_FLAGS_TO_PASS).
567 CHECK_TARGET_MODULES
= \
574 # This is a list of the install targets for all of the modules which are
575 # compiled using $(TARGET_FLAGS_TO_PASS).
576 INSTALL_TARGET_MODULES
= \
584 # This is a shell case of all modules which are compiled using
585 # $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
586 TARGET_LIBS
= libio | libstdc
++ | librx | libg
++ | newlib | xiberty
588 # The first rule in the file had better be this one. Don't put any above it.
592 # The target built for a native build.
596 $(ALL_TARGET_MODULES
) \
600 # Do a target for all the subdirectories. A ``make do-X'' will do a
601 # ``make X'' in all subdirectories (because, in general, there is a
602 # dependency (below) of X upon do-X, a ``make X'' will also do this,
603 # but it may do additional work as well).
604 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
605 # because it is so large that it can easily overflow the command line
606 # length limit on some systems.
615 do-maintainer-clean \
619 @target
=`echo $@ | sed -e 's/^do-//'`; \
621 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
622 for i in
$(SUBDIRS
) $(TARGET_CONFIGDIRS
); do \
623 if
[ -f .
/$$i/Makefile
]; then \
626 for flag in
$(EXTRA_TARGET_FLAGS
); do \
627 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
631 for flag in
$(EXTRA_GCC_FLAGS
); do \
632 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
636 for flag in
$(EXTRA_HOST_FLAGS
); do \
637 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
641 export AR AS CC CXX NM RANLIB
; \
643 $(MAKE
) $(BASE_FLAGS_TO_PASS
) "AR=$${AR}" "AS=$${AS}" \
644 "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
645 "RANLIB=$${RANLIB}" \
647 then true
; else exit
1; fi
; \
651 # Here are the targets which correspond to the do-X targets.
653 .PHONY
: info installcheck dvi install-info
654 .PHONY
: clean distclean mostlyclean maintainer-clean
realclean
655 .PHONY
: local-clean local-distclean local-maintainer-clean
657 installcheck: do-installcheck
660 install-info
: do-install-info
dir.
info
661 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
662 if
[ -f
dir.
info ] ; then \
663 $(INSTALL_DATA
) dir.
info $(infodir)/dir.
info ; \
667 -rm -f
*.a TEMP errs core
*.o
*~ \
#* TAGS *.E
670 -rm -f Makefile config.status
672 local-maintainer-clean
:
673 @echo
"This command is intended for maintainers to use;"
674 @echo
"it deletes files that may require special tools to rebuild."
676 clean: do-clean local-clean
677 mostlyclean: do-mostlyclean local-clean
678 distclean: do-distclean local-clean local-distclean
679 maintainer-clean
: local-maintainer-clean do-maintainer-clean local-clean
680 maintainer-clean
: local-distclean
681 realclean: maintainer-clean
686 check: $(CHECK_MODULES
) \
687 $(CHECK_TARGET_MODULES
) \
688 $(CHECK_X11_MODULES
) \
691 # Installation targets.
693 .PHONY
: install uninstall source-vault binary-vault vault-install
694 install: $(INSTALL_TARGET
)
697 @echo
"the uninstall target is not supported in this tree"
700 $(MAKE
) -f .
/release
/Build-A-Release \
701 host
=$(host_alias
) source-vault
704 $(MAKE
) -f .
/release
/Build-A-Release \
705 host
=$(host_alias
) target
=$(target_alias
)
708 @if
[ -f .
/release
/vault-install
] ; then \
709 .
/release
/vault-install
$(host_alias
) $(target_alias
) ; \
715 install.
all: install-no-fixedincludes
716 @if
[ -f .
/gcc
/Makefile
] ; then \
717 r
=`pwd` ; export r
; \
719 $(MAKE
) $(FLAGS_TO_PASS
) install-headers
) ; \
724 # install-no-fixedincludes is used because Cygnus can not distribute
725 # the fixed header files.
726 .PHONY
: install-no-fixedincludes
727 install-no-fixedincludes
: \
730 $(INSTALL_TARGET_MODULES
) \
731 $(INSTALL_X11_MODULES
) \
734 # Install the gcc headers files, but not the fixed include files,
735 # which Cygnus is not allowed to distribute. This rule is very
736 # dependent on the workings of the gcc Makefile.in.
737 .PHONY
: gcc-no-fixedincludes
738 gcc-no-fixedincludes
:
739 @if
[ -f .
/gcc
/Makefile
]; then \
740 rm -rf gcc
/tmp-include
; \
741 mv gcc
/include gcc
/tmp-include
2>/dev
/null
; \
743 cp
$(srcdir)/gcc
/gsyslimits.h gcc
/include/syslimits.h
; \
744 touch gcc
/stmp-fixinc gcc
/include/fixed
; \
745 rm -f gcc
/stmp-headers gcc
/stmp-int-hdrs
; \
747 srcroot
=`cd $(srcdir); pwd` ; export srcroot
; \
749 $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
750 rm -rf gcc
/include; \
751 mv gcc
/tmp-include gcc
/include 2>/dev
/null
; \
754 # This rule is used to build the modules which use FLAGS_TO_PASS. To
755 # build a target all-X means to cd to X and make all.
757 # all-gui, and all-libproc are handled specially because
758 # they are still experimental, and if they fail to build, that
759 # shouldn't stop "make all".
760 .PHONY
: $(ALL_MODULES
) all-gui all-libproc
761 $(ALL_MODULES
) all-gui all-libproc
:
762 @
dir=`echo $@ | sed -e 's/all-//'`; \
763 if
[ -f .
/$${dir}/Makefile
] ; then \
765 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
766 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) all); \
771 # These rules are used to check the modules which use FLAGS_TO_PASS.
772 # To build a target check-X means to cd to X and make check. Some
773 # modules are only tested in a native toolchain.
775 .PHONY
: $(CHECK_MODULES
) $(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
776 $(NATIVE_CHECK_MODULES
):
777 @if
[ "$(host_canonical)" = "$(target_canonical)" ] ; then \
778 dir=`echo $@ | sed -e 's/check-//'`; \
779 if
[ -f .
/$${dir}/Makefile
] ; then \
781 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
782 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
788 $(CROSS_CHECK_MODULES
):
789 @
dir=`echo $@ | sed -e 's/check-//'`; \
790 if
[ -f .
/$${dir}/Makefile
] ; then \
792 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
793 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
798 # This rule is used to install the modules which use FLAGS_TO_PASS.
799 # To build a target install-X means to cd to X and make install.
800 .PHONY
: $(INSTALL_MODULES
)
801 $(INSTALL_MODULES
): install-dirs
802 @
dir=`echo $@ | sed -e 's/install-//'`; \
803 if
[ -f .
/$${dir}/Makefile
] ; then \
805 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
806 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
811 # This rule is used to configure the modules which are built with the
813 .PHONY
: $(CONFIGURE_TARGET_MODULES
)
814 $(CONFIGURE_TARGET_MODULES
):
815 @
dir=`echo $@ | sed -e 's/configure-//'`; \
816 if
[ -f .
/$${dir}/Makefile
] ; then \
818 elif echo
" $(TARGET_CONFIGDIRS) " | grep
" $${dir} " >/dev
/null
2>&1; then \
819 if
[ -d .
/$${dir} ]; then true
; else mkdir
$${dir}; fi
; \
821 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
822 AR
="$(AR_FOR_TARGET)"; export AR
; \
823 AS
="$(AS_FOR_TARGET)"; export AS
; \
824 CC
="$(CC_FOR_TARGET)"; export CC
; \
825 CFLAGS
="$(CFLAGS_FOR_TARGET)"; export CFLAGS
; \
826 CXX
="$(CXX_FOR_TARGET)"; export CXX
; \
827 CXXFLAGS
="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS
; \
828 NM
="$(NM_FOR_TARGET)"; export NM
; \
829 RANLIB
="$(RANLIB_FOR_TARGET)"; export RANLIB
; \
831 $${srcroot}/configure
$(CONFIG_ARGUMENTS
) --srcdir=$${srcroot}/$${dir}; \
836 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
837 # To build a target all-X means to cd to X and make all.
838 .PHONY
: $(ALL_TARGET_MODULES
)
839 $(ALL_TARGET_MODULES
):
840 @
dir=`echo $@ | sed -e 's/all-//'`; \
841 if
[ -f .
/$${dir}/Makefile
] ; then \
843 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
844 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) all); \
849 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
850 # To build a target install-X means to cd to X and make install.
851 .PHONY
: $(CHECK_TARGET_MODULES
)
852 $(CHECK_TARGET_MODULES
):
853 @
dir=`echo $@ | sed -e 's/check-//'`; \
854 if
[ -f .
/$${dir}/Makefile
] ; then \
856 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
857 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check); \
862 # This rule is used to install the modules which use
863 # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
865 .PHONY
: $(INSTALL_TARGET_MODULES
)
866 $(INSTALL_TARGET_MODULES
): install-dirs
867 @
dir=`echo $@ | sed -e 's/install-//'`; \
868 if
[ -f .
/$${dir}/Makefile
] ; then \
870 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
871 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) install); \
876 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
877 # To build a target all-X means to cd to X and make all.
878 .PHONY
: $(ALL_X11_MODULES
)
880 @
dir=`echo $@ | sed -e 's/all-//'`; \
881 if
[ -f .
/$${dir}/Makefile
] ; then \
883 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
885 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) all); \
890 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
891 # To build a target check-X means to cd to X and make all.
892 .PHONY
: $(CHECK_X11_MODULES
)
893 $(CHECK_X11_MODULES
):
894 @
dir=`echo $@ | sed -e 's/check-//'`; \
895 if
[ -f .
/$${dir}/Makefile
] ; then \
897 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
899 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) check); \
904 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
905 # To build a target install-X means to cd to X and make install.
906 .PHONY
: $(INSTALL_X11_MODULES
)
907 $(INSTALL_X11_MODULES
):
908 @
dir=`echo $@ | sed -e 's/install-//'`; \
909 if
[ -f .
/$${dir}/Makefile
] ; then \
911 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
913 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) install); \
918 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
921 @if
[ -f .
/gcc
/Makefile
] ; then \
923 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
924 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) all); \
931 @if
[ -f .
/gcc
/Makefile
] ; then \
933 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
934 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) check); \
941 @if
[ -f .
/gcc
/Makefile
] ; then \
943 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
944 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
951 # This rule is used to install the modules which use FLAGS_TO_PASS.
952 # To build a target install-X means to cd to X and make install.
953 .PHONY
: install-dosrel
954 install-dosrel
: install-dirs
info
955 @
dir=`echo $@ | sed -e 's/install-//'`; \
956 if
[ -f .
/$${dir}/Makefile
] ; then \
958 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
959 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
967 # This is a list of inter-dependencies among modules.
970 all-binutils
: all-libiberty all-opcodes all-bfd all-flex all-byacc
973 all-dejagnu
: all-tcl all-expect all-tk
974 all-diff
: all-libiberty
976 all-emacs19
: all-byacc
978 all-expect
: all-tcl all-tk
979 all-fileutils
: all-libiberty
981 all-flex
: all-libiberty all-byacc
982 all-gas
: all-libiberty all-opcodes all-bfd
985 all-gcc
: all-libiberty all-byacc all-binutils all-gas all-ld
986 all-gdb
: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim
$(gdbnlmrequirements
)
987 all-gprof
: all-libiberty all-bfd
988 all-grep
: all-libiberty
989 all-gui
: all-gdb all-libproc all-librx
990 all-gzip
: all-libiberty
991 all-hello
: all-libiberty
993 all-ispell
: all-emacs19
994 all-ld
: all-libiberty all-bfd all-byacc all-flex
995 configure-libg
++: all-gcc
996 all-libg
++: configure-libg
++ all-gas all-ld all-gcc all-xiberty all-newlib all-libio all-librx all-libstdc
++
997 configure-libgloss
: all-gcc
998 all-libgloss
: configure-libgloss
999 configure-libio
: all-gcc
1000 all-libio
: configure-libio all-gas all-ld all-gcc all-xiberty all-newlib
1002 configure-librx
: all-gcc all-newlib
1003 all-librx
: configure-librx
1004 configure-libstdc
++: all-gcc
1005 all-libstdc
++: configure-libstdc
++ all-gas all-ld all-gcc all-xiberty all-newlib all-libio
1006 all-m4
: all-libiberty
1007 all-make
: all-libiberty
1009 configure-newlib
: all-gcc
1010 all-newlib
: configure-newlib all-binutils all-gas all-gcc
1011 all-opcodes
: all-bfd
1013 all-prms
: all-libiberty
1016 all-recode
: all-libiberty
1017 all-sed
: all-libiberty
1018 all-send-pr
: all-prms
1020 all-sim
: all-libiberty all-bfd
1021 all-tar
: all-libiberty
1023 all-tclX
: all-tcl all-tk
1025 all-texinfo
: all-libiberty
1027 all-tgas
: all-libiberty all-bfd
1030 all-uudecode
: all-libiberty
1031 configure-xiberty
: all-gcc
1032 all-xiberty
: configure-xiberty all-gcc all-ld all-newlib
1034 ### other supporting targets
1041 .PHONY
: install-dirs
1043 @for i in
$(MAKEDIRS
) ; do \
1044 echo Making
$$i...
; \
1045 parent
=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
1046 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
; \
1047 if
[ ! -d
$$i ] ; then \
1048 if mkdir
$$i ; then \
1059 dir.
info: do-install-info
1060 if
[ -f
$(srcdir)/texinfo
/gen-info-dir
] ; then \
1061 $(srcdir)/texinfo
/gen-info-dir
$(infodir) $(srcdir)/texinfo
/dir.info-template
> dir.
info.new
; \
1062 mv
-f
dir.
info.new
dir.
info ; \
1067 @echo
"Building a full distribution of this tree isn't done"
1068 @echo
"via 'make dist'. Check out the etc/ subdirectory"
1072 # Right now this just builds TAGS in each subdirectory. emacs19 has the
1073 # ability to use several tags files at once, so there is probably no need
1074 # to combine them into one big TAGS file (like CVS 1.3 does). We could
1075 # (if we felt like it) have this Makefile write a piece of elisp which
1076 # the user could load to tell emacs19 where all the TAGS files we just
1080 # with the gnu make, this is done automatically.
1082 Makefile
: Makefile.in configure.in
$(host_makefile_frag
) $(target_makefile_frag
)
1083 $(SHELL
) .
/config.status
1086 # Support for building net releases
1088 # Files in devo used in any net release.
1089 # ChangeLog omitted because it may refer to files which are not in this
1090 # distribution (perhaps it would be better to include it anyway).
1091 DEVO_SUPPORT
= README Makefile.in configure configure.in \
1092 config.guess config.sub config move-if-change \
1093 mpw-README mpw-build.in mpw-config.in mpw-configure \
1094 COPYING COPYING.LIB
install.sh
1096 # Files in devo/etc used in any net release.
1097 # ChangeLog omitted because it may refer to files which are not in this
1098 # distribution (perhaps it would be better to include it anyway).
1099 ETC_SUPPORT
= Makefile.in cfg-paper.texi configure.in configure.man \
1100 configure.texi standards.texi make-stds.texi
1101 ETC_SUPPORT_PFX
=configure.
info standards.
info cfg-paper.
info
1103 # When you use `make setup-dirs' or `make taz' you should always redefine
1105 SUPPORT_FILES
= list-of-support-files-for-tool-in-question
1106 # Directories that might want `make diststuff' run.
1107 DISTSTUFFDIRS
= ld gprof gdb libg
++ binutils gnats gas
1108 # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
1109 DISTBISONFILES
= binutils
/Makefile.in gas
/Makefile.in gdb
/Makefile.in
1110 # Directories where "info" should be built.
1111 DISTDOCDIRS
= ld gprof binutils gas bfd libg
++ libio gdb gnats send-pr etc
1115 taz
: $(DEVO_SUPPORT
) $(SUPPORT_FILES
) \
1116 texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1117 # Make sure "diststuff" files get built properly.
1118 for f in
$(DISTBISONFILES
) ; do \
1119 if
[ -r
$$f ]; then \
1120 sed
'/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp
; \
1124 # Take out texinfo from a few places; make simple BISON=bison line.
1125 sed
-e
'/^all\.normal: /s/\all-texinfo //' \
1126 -e
'/^ install-texinfo /d' \
1127 -e
'/^BISON = /,/^$$/d' \
1128 -e
'/^# BISON:/s/.*/BISON = bison -y/' \
1130 mv
-f tmp Makefile.in
1132 $(start-sanitize-Sanitize
)
1133 @if
[ -f .Sanitize
] ; then echo
"RUN Sanitize FIRST!" ; false
; fi
;
1134 $(end-sanitize-Sanitize
)
1136 # Doc files don't change; include them in distribution.
1137 for f in
$(DISTDOCDIRS
) ; do \
1138 if
[ -r
$$f/Makefile
]; then \
1139 (cd
$$f ; $(MAKE
) info) || exit
1 ; \
1142 # Make links, and run "make diststuff" when needed.
1143 # The `echo' for setting `p' is to convert all whitespace to spaces.
1144 # Then the `case' further below should tell whether $$d is in
1146 rm -rf proto-toplev
; mkdir proto-toplev
1147 set
-e
; dirs
="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1148 p
=" `echo $(DISTSTUFFDIRS)` " ; \
1149 for d in
$$dirs ; do \
1150 if
[ -d
$$d ]; then \
1153 (cd
$$d ; $(MAKE
) diststuff
) || exit
1 ;; \
1155 if
[ -d
$$d/proto-
$$d.
dir ]; then \
1156 ln
-s ..
/$$d/proto-
$$d.
dir proto-toplev
/$$d ; \
1158 ln
-s ..
/$$d proto-toplev
/$$d ; \
1160 else ln
-s ..
/$$d proto-toplev
/$$d ; fi
; \
1164 mkdir proto-toplev
/etc
1165 (cd proto-toplev
/etc
; \
1166 for i in
$(ETC_SUPPORT
); do \
1167 ln
-s ..
/..
/etc
/$$i .
; \
1169 for i in
$(ETC_SUPPORT_PFX
); do \
1170 ln
-s ..
/..
/etc
/$$i* .
; \
1173 # Take out texinfo from configurable dirs
1174 rm proto-toplev
/configure.in
1175 sed
-e
'/^host_tools=/s/texinfo //' \
1176 <configure.in
>proto-toplev
/configure.in
1178 mkdir proto-toplev
/texinfo
1179 ln
-s ..
/..
/texinfo
/texinfo.
tex proto-toplev
/texinfo
/
1180 ln
-s ..
/..
/texinfo
/gpl.texinfo proto-toplev
/texinfo
/
1181 ln
-s ..
/..
/texinfo
/lgpl.texinfo proto-toplev
/texinfo
/
1182 ln
-s ..
/..
/texinfo
/tex3patch proto-toplev
/texinfo
/
1183 chmod og
=u
`find . -print`
1184 (VER
=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
1185 echo
"==> Making $(TOOL)-$$VER.tar.gz"; \
1186 rm -f
$(TOOL
)-$$VER; ln
-s proto-toplev
$(TOOL
)-$$VER; \
1187 tar cfh
- $(TOOL
)-$$VER \
1188 |
$(GZIPPROG
) -v
-9 >$(TOOL
)-$$VER.
tar.gz
)
1190 TEXINFO_SUPPORT
= texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1191 DIST_SUPPORT
= $(DEVO_SUPPORT
) $(TEXINFO_SUPPORT
)
1194 GAS_SUPPORT_DIRS
= bfd
include libiberty opcodes
1195 gas.
tar.gz
: $(DIST_SUPPORT
) $(GAS_SUPPORT_DIRS
) gas
1196 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1197 SUPPORT_FILES
="$(GAS_SUPPORT_DIRS)"
1199 # The FSF "binutils" release includes gprof and ld.
1200 .PHONY
: binutils.
tar.gz
1201 BINUTILS_SUPPORT_DIRS
= bfd gas
include libiberty opcodes
ld gprof
1202 binutils.
tar.gz
: $(DIST_SUPPORT
) $(BINUTILS_SUPPORT_DIRS
) binutils
1203 $(MAKE
) -f Makefile.in taz TOOL
=binutils \
1204 SUPPORT_FILES
="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1206 .PHONY
: gas
+binutils.
tar.gz
1207 GASB_SUPPORT_DIRS
= $(GAS_SUPPORT_DIRS
) binutils
ld gprof
1208 gas
+binutils.
tar.gz
: $(DIST_SUPPORT
) $(GASB_SUPPORT_DIRS
) gas
1209 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1210 SUPPORT_FILES
="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1212 .PHONY
: libg
++.
tar.gz
1213 LIBGXX_SUPPORT_DIRS
=include libstdc
++ libio librx libiberty xiberty
1214 libg
++.
tar.gz
: $(DIST_SUPPORT
) libg
++
1215 $(MAKE
) -f Makefile.in taz TOOL
=libg
++ \
1216 SUPPORT_FILES
="$(LIBGXX_SUPPORT_DIRS)"
1218 GNATS_SUPPORT_DIRS
=include libiberty send-pr
1219 gnats.
tar.gz
: $(DIST_SUPPORT
) $(GNATS_SUPPORT_DIRS
) gnats
1220 $(MAKE
) -f Makefile.in taz TOOL
=gnats \
1221 SUPPORT_FILES
="$(GNATS_SUPPORT_DIRS)"
1224 GDB_SUPPORT_DIRS
= bfd
include libiberty mmalloc opcodes readline sim utils
1225 GDBTK_SUPPORT_DIRS
= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
1226 gdb.
tar.gz
: $(DIST_SUPPORT
) $(GDB_SUPPORT_DIRS
) gdb
1227 $(MAKE
) -f Makefile.in taz TOOL
=gdb \
1228 SUPPORT_FILES
="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
1230 .PHONY
: newlib.
tar.gz
1231 NEWLIB_SUPPORT_DIRS
=libgloss
1232 # taz configures for the sun4 target which won't configure newlib.
1233 # We need newlib configured so that the .info files are made.
1234 # Unfortunately, it is not enough to just configure newlib separately:
1235 # taz will build the .info files but since SUBDIRS won't contain newlib,
1236 # distclean won't be run (leaving Makefile, config.status, and the tmp files
1237 # used in building the .info files, eg: *.def, *.ref).
1238 # Compensate here by configuring newlib for a simple (no multilib support)
1239 # cross target (sparc64), building the info files, and doing make distclean
1241 newlib.
tar.gz
: $(DIST_SUPPORT
) $(NEWLIB_SUPPORT_DIRS
) newlib
1243 cd newlib
&& ..
/configure
--srcdir $$rootme/newlib \
1244 --host sun4
--target sparc64-elf
1245 cd newlib
; make
info
1246 cd newlib
; make
distclean
1247 $(MAKE
) -f Makefile.in taz TOOL
=newlib \
1248 SUPPORT_FILES
="$(NEWLIB_SUPPORT_DIRS)" \
1249 DEVO_SUPPORT
="$(DEVO_SUPPORT) COPYING.NEWLIB" \
1250 DISTDOCDIRS
="$(DISTDOCDIRS) newlib"
1255 # start-sanitize-chill
1256 ## This is ugly, but I don't want GNU make to put these variables in
1257 ## the environment. Older makes will see this as a set of targets
1258 ## with no dependencies and no actions.
1259 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET
:
1260 # end-sanitize-chill
1262 # end of Makefile.in