2 # Makefile for directory with subdirs to build.
3 # Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
5 # This file is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24 exec_prefix = $(prefix)
25 bindir = $(exec_prefix)/bin
26 libdir = $(exec_prefix)/lib
27 tooldir
= $(exec_prefix)/$(target
)
29 program_transform_name
=
31 datadir = $(prefix)/share
32 mandir = $(prefix)/man
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
42 infodir = $(prefix)/info
43 includedir = $(prefix)/include
48 INSTALL
= $$s/install.sh
-c
49 INSTALL_PROGRAM
= $(INSTALL
)
50 INSTALL_DATA
= $(INSTALL
) -m
644
51 INSTALL_XFORM
= $(INSTALL
) -t
='$(program_transform_name)'
53 INSTALL_DOSREL
= install-dosrel-fake
60 # Special variables passed down in EXTRA_GCC_FLAGS. They are defined
61 # here so that they can be overridden by Makefile fragments.
62 HOST_CC
= $(CC_FOR_BUILD
)
64 HOST_PREFIX_1
= loser-
66 # We don't specify -g -O because many compilers don't support -g -O,
67 # and/or -O is broken in and of itself.
70 CFLAGS_FOR_TARGET
= $(CFLAGS
)
71 LIBCFLAGS_FOR_TARGET
= $(CFLAGS_FOR_TARGET
)
75 # start-sanitize-chill
76 CHILLFLAGS
= $(CFLAGS
)
81 # Use -O2 to stress test the compiler.
83 LIBCXXFLAGS
= $(CXXFLAGS
) -fno-implicit-templates
84 CXXFLAGS_FOR_TARGET
= $(CXXFLAGS
)
85 LIBCXXFLAGS_FOR_TARGET
= $(CXXFLAGS_FOR_TARGET
) -fno-implicit-templates
92 # Not plain GZIP, since gzip looks there for extra command-line options.
95 # These values are substituted by configure.
99 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
100 BISON
= `if [ -f $$r/byacc/byacc ] ; \
101 then echo $$r/byacc/byacc ; \
102 else echo ${DEFAULT_YACC} ; \
105 LEX
= `if [ -f $$r/flex/flex ] ; \
106 then echo $$r/flex/flex ; \
107 else echo ${DEFAULT_LEX} ; fi`
109 M4
= `if [ -f $$r/m4/m4 ] ; \
110 then echo $$r/m4/m4 ; \
113 MAKEINFO
= `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
114 then echo $$r/texinfo/makeinfo/makeinfo ; \
115 else echo makeinfo ; fi`
117 # This just becomes part of the MAKEINFO definition passed down to
118 # sub-makes. It lets flags be given on the command line while still
119 # using the makeinfo from the object tree.
122 EXPECT
= `if [ -f $$r/expect/expect ] ; \
123 then echo $$r/expect/expect ; \
124 else echo expect ; fi`
126 RUNTEST
= `if [ -f $$s/dejagnu/runtest ] ; \
127 then echo $$s/dejagnu/runtest ; \
128 else echo runtest ; fi`
131 # compilers to use to create programs which must be run in the build
134 CXX_FOR_BUILD
= $(CXX
)
136 SUBDIRS
= "this is set via configure, don't edit this"
139 # This is set by the configure script to the list of directories which
140 # should be built using the target tools.
141 TARGET_CONFIGDIRS
= libiberty libgloss newlib libio librx libstdc
++ libg
++ winsup
143 # Target libraries are put under this directory:
144 # Changed by configure to $(target_alias) if cross.
147 # This is set by the configure script to the arguments passed to configure.
150 # This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
154 # This is the name of the environment variable used for the path to
155 # the libraries. This may be changed by configure.in.
156 RPATH_ENVVAR
= LD_LIBRARY_PATH
158 # configure.in sets SET_LIB_PATH to this if --enable-shared was used.
159 REALLY_SET_LIB_PATH
= \
160 $(RPATH_ENVVAR
)=$$r/bfd
:$$r/opcodes
:$$$(RPATH_ENVVAR
); \
161 export $(RPATH_ENVVAR
);
164 INSTALL_TARGET
= install-dirs \
166 $(INSTALL_TARGET_MODULES
) \
167 $(INSTALL_X11_MODULES
) \
173 if [ -f $$r/gcc/xgcc ] ; then \
174 if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
175 if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
176 echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
178 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
181 echo $$r/gcc/xgcc -B$$r/gcc/; \
184 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
187 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
191 # If CC_FOR_TARGET is not overriden on the command line, then this
192 # variable is passed down to the gcc Makefile, where it is used to
193 # build libgcc2.a. We define it here so that it can itself be
194 # overridden on the command line.
195 GCC_FOR_TARGET
= $$r/gcc
/xgcc
-B
$$r/gcc
/
197 # start-sanitize-chill
198 CHILL_FOR_TARGET
= ` \
199 if [ -f $$r/gcc/xgcc ] ; then \
200 echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
202 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
205 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
212 if [ -f $$r/gcc/xgcc ] ; then \
213 if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
214 if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
215 echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
217 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
220 echo $$r/gcc/xgcc -B$$r/gcc/; \
223 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
226 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
231 if [ -f $$r/gas/as.new ] ; then \
232 echo $$r/gas/as.new ; \
234 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
237 t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
242 if [ -f $$r/ld/ld.new ] ; then \
243 echo $$r/ld/ld.new ; \
245 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
248 t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
252 DLLTOOL_FOR_TARGET
= ` \
253 if [ -f $$r/binutils/dlltool ] ; then \
254 echo $$r/binutils/dlltool ; \
256 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
259 t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
264 if [ -f $$r/binutils/ar ] ; then \
265 echo $$r/binutils/ar ; \
267 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
270 t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
274 RANLIB_FOR_TARGET
= ` \
275 if [ -f $$r/binutils/ranlib ] ; then \
276 echo $$r/binutils/ranlib ; \
278 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
281 t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
286 if [ -f $$r/binutils/nm.new ] ; then \
287 echo $$r/binutils/nm.new ; \
289 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
292 t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
296 #### host and target specific makefile fragments come in here.
299 # Flags to pass down to all sub-makes.
300 # Please keep these in alphabetical order.
301 BASE_FLAGS_TO_PASS
= \
302 "AR_FLAGS=$(AR_FLAGS)" \
303 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
304 "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
306 "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
307 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
309 "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
310 $(start-sanitize-chill
)\
311 "CHILLFLAGS=$(CHILLFLAGS)" \
312 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
313 "CHILL_LIB=$(CHILL_LIB)" \
314 $(end-sanitize-chill
)\
315 "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
316 "CXXFLAGS=$(CXXFLAGS)" \
317 "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
318 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
319 "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
320 "INSTALL=$(INSTALL)" \
321 "INSTALL_DATA=$(INSTALL_DATA)" \
322 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
323 "INSTALL_XFORM=$(INSTALL_XFORM)" \
324 "LDFLAGS=$(LDFLAGS)" \
326 "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
327 "LIBCFLAGS=$(LIBCFLAGS)" \
328 "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
329 "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
330 "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
333 "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
334 "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
335 "PICFLAG=$(PICFLAG)" \
336 "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
337 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
340 "RUNTEST=$(RUNTEST)" \
341 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
343 "exec_prefix=$(exec_prefix)" \
347 # Flags to pass down to most sub-makes, in which we're building with
348 # the host environment.
349 # If any variables are added here, they must be added to do-*, below.
355 'DLLTOOL=$(DLLTOOL)' \
360 FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_HOST_FLAGS
)
362 # Flags that are concerned with the location of the X11 include files
365 # NOTE: until the top-level is getting the values via autoconf, it only
366 # causes problems to have this top-level Makefile overriding the autoconf-set
367 # values in child directories. Only variables that don't conflict with
368 # autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
370 X11_FLAGS_TO_PASS
= \
371 'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
372 'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
374 # Flags to pass down to makes which are built with the target environment.
375 # The double $ decreases the length of the command line; the variables
376 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
377 # If any variables are added here, they must be added to do-*, below.
378 EXTRA_TARGET_FLAGS
= \
379 'AR=$$(AR_FOR_TARGET)' \
380 'AS=$$(AS_FOR_TARGET)' \
381 'CC=$$(CC_FOR_TARGET)' \
382 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
383 'CXX=$$(CXX_FOR_TARGET)' \
384 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
385 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
386 'LD=$$(LD_FOR_TARGET)' \
387 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
388 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
389 'NM=$$(NM_FOR_TARGET)' \
390 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
391 'RANLIB=$$(RANLIB_FOR_TARGET)'
393 TARGET_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_TARGET_FLAGS
)
395 # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
396 # unfortunately needs the native compiler and the target ar and
398 # If any variables are added here, they must be added to do-*, below.
399 # The HOST_* variables are a special case, which are used for the gcc
400 # cross-building scheme.
401 # The condition for setting GCC_FOR_TARGET is so that if CC_FOR_TARGET
402 # is overridden on the command line we use that value for
403 # GCC_FOR_TARGET, and, if it is not, we use the value of
404 # GCC_FOR_TARGET. We do this because the default value of
405 # CC_FOR_TARGET depends on gcc/xgcc, which won't exist when we first
406 # go into the gcc directory. FIXME: The test won't work correctly for
407 # older non-Posix make programs that do not set MAKEFLAGS; in that
408 # case, overriding CC_FOR_TARGET on the command line will not affect
411 'AR=$$(AR_FOR_TARGET)' \
415 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
416 'HOST_CC=$(CC_FOR_BUILD)' \
417 'HOST_PREFIX=$(HOST_PREFIX)' \
418 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
420 'RANLIB=$$(RANLIB_FOR_TARGET)' \
421 "GCC_FOR_TARGET=`if echo '$(MAKEFLAGS)' | grep CC_FOR_TARGET >/dev/null 2>&1; then \
422 echo '$$(CC_FOR_TARGET)'; \
424 echo $(GCC_FOR_TARGET); \
426 `if test x"$(LANGUAGES)" != x; then echo "LANGUAGES=$(LANGUAGES)"; fi` \
427 `if test x"$(STMP_FIXPROTO)" != x; then echo "STMP_FIXPROTO=$(STMP_FIXPROTO)"; fi` \
428 `if test x"$(LIMITS_H_TEST)" != x; then echo "LIMITS_H_TEST=$(LIMITS_H_TEST)"; fi` \
429 `if test x"$(LIBGCC1_TEST)" != x; then echo "LIBGCC1_TEST=$(LIBGCC1_TEST)"; fi` \
430 `if test x"$(LIBGCC2_CFLAGS)" != x; then echo "LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)"; fi` \
431 `if test x"$(LIBGCC2_INCLUDES)" != x; then echo "LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)"; fi` \
432 `if test x"$(ENQUIRE)" != x; then echo "ENQUIRE=$(ENQUIRE)"; fi` \
433 `if test x"$(BOOT_CFLAGS)" != x; then echo "BOOT_CFLAGS=$(BOOT_CFLAGS)"; fi`
435 GCC_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_GCC_FLAGS
)
437 # This is a list of the targets for all of the modules which are compiled
438 # using $(FLAGS_TO_PASS).
490 # This is a list of the check targets for all of the modules which are
491 # compiled using $(FLAGS_TO_PASS).
493 # The list is in two parts. The first lists those tools which
494 # are tested as part of the host's native tool-chain, and not
495 # tested in a cross configuration.
496 NATIVE_CHECK_MODULES
= \
500 CROSS_CHECK_MODULES
= \
546 CHECK_MODULES
=$(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
548 # This is a list of the install targets for all of the modules which are
549 # compiled using $(FLAGS_TO_PASS).
600 # This is a list of the targets for all of the modules which are compiled
601 # using $(X11_FLAGS_TO_PASS).
612 # This is a list of the check targets for all of the modules which are
613 # compiled using $(X11_FLAGS_TO_PASS).
614 CHECK_X11_MODULES
= \
623 # This is a list of the install targets for all the modules which are
624 # compiled using $(X11_FLAGS_TO_PASS).
625 INSTALL_X11_MODULES
= \
635 # This is a list of the targets for all of the modules which are compiled
636 # using $(TARGET_FLAGS_TO_PASS).
637 ALL_TARGET_MODULES
= \
639 all-target-libstdc
++ \
644 all-target-libgloss \
645 all-target-libiberty \
648 # This is a list of the configure targets for all of the modules which
649 # are compiled using the target tools.
650 CONFIGURE_TARGET_MODULES
= \
651 configure-target-libio \
652 configure-target-libstdc
++ \
653 configure-target-librx \
654 configure-target-libg
++ \
655 configure-target-newlib \
656 configure-target-winsup \
657 configure-target-libgloss \
658 configure-target-libiberty \
659 configure-target-examples
661 # This is a list of the check targets for all of the modules which are
662 # compiled using $(TARGET_FLAGS_TO_PASS).
663 CHECK_TARGET_MODULES
= \
665 check-target-libstdc
++ \
666 check-target-libg
++ \
667 check-target-newlib \
668 check-target-winsup \
669 check-target-libiberty
671 # This is a list of the install targets for all of the modules which are
672 # compiled using $(TARGET_FLAGS_TO_PASS).
673 INSTALL_TARGET_MODULES
= \
674 install-target-libio \
675 install-target-libstdc
++ \
676 install-target-libg
++ \
677 install-target-newlib \
678 install-target-winsup \
679 install-target-libgloss \
680 install-target-libiberty
682 # This is a list of the targets for which we can do a clean-{target}.
734 # All of the target modules that can be cleaned
735 CLEAN_TARGET_MODULES
= \
737 clean-target-libstdc
++ \
739 clean-target-libg
++ \
740 clean-target-newlib \
741 clean-target-winsup \
742 clean-target-libgloss \
743 clean-target-libiberty \
744 clean-target-examples
746 # All of the x11 modules that can be cleaned
747 CLEAN_X11_MODULES
= \
757 # The first rule in the file had better be this one. Don't put any above it.
761 # The target built for a native build.
765 $(ALL_TARGET_MODULES
) \
769 # Do a target for all the subdirectories. A ``make do-X'' will do a
770 # ``make X'' in all subdirectories (because, in general, there is a
771 # dependency (below) of X upon do-X, a ``make X'' will also do this,
772 # but it may do additional work as well).
773 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
774 # because it is so large that it can easily overflow the command line
775 # length limit on some systems.
784 do-maintainer-clean \
788 @target
=`echo $@ | sed -e 's/^do-//'`; \
790 s
=`cd $(srcdir); pwd`; export s
; \
792 for i in
$(SUBDIRS
) -dummy-
; do \
793 if
[ -f .
/$$i/Makefile
]; then \
796 for flag in
$(EXTRA_GCC_FLAGS
); do \
797 eval
`echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
801 for flag in
$(EXTRA_HOST_FLAGS
); do \
802 eval
`echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
806 export AR AS CC CXX NM RANLIB DLLTOOL
; \
808 $(MAKE
) $(BASE_FLAGS_TO_PASS
) "AR=$${AR}" "AS=$${AS}" \
809 "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
810 "RANLIB=$${RANLIB}" \
811 "DLLTOOL=$${DLLTOOL}" \
813 then true
; else exit
1; fi
; \
816 @target
=`echo $@ | sed -e 's/^do-//'`; \
818 s
=`cd $(srcdir); pwd`; export s
; \
820 for i in
$(TARGET_CONFIGDIRS
) -dummy-
; do \
821 if
[ -f
$(TARGET_SUBDIR
)/$$i/Makefile
]; then \
822 for flag in
$(EXTRA_TARGET_FLAGS
); do \
823 eval
`echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
825 export AR AS CC CXX NM RANLIB DLLTOOL
; \
826 if
(cd
$(TARGET_SUBDIR
)/$$i; \
827 $(MAKE
) $(BASE_FLAGS_TO_PASS
) "AR=$${AR}" "AS=$${AS}" \
828 "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
829 "RANLIB=$${RANLIB}" \
830 "DLLTOOL=$${DLLTOOL}" \
832 then true
; else exit
1; fi
; \
836 # Here are the targets which correspond to the do-X targets.
838 .PHONY
: info installcheck dvi install-info
839 .PHONY
: clean distclean mostlyclean maintainer-clean
realclean
840 .PHONY
: local-clean local-distclean local-maintainer-clean
842 installcheck: do-installcheck
845 install-info
: do-install-info
dir.
info
846 s
=`cd $(srcdir); pwd`; export s
; \
847 if
[ -f
dir.
info ] ; then \
848 $(INSTALL_DATA
) dir.
info $(infodir)/dir.
info ; \
852 -rm -f
*.a TEMP errs core
*.o
*~ \
#* TAGS *.E
855 -rm -f Makefile config.status
856 -if
[ "$(TARGET_SUBDIR)" != "." ]; then \
857 rm -rf
$(TARGET_SUBDIR
); \
860 local-maintainer-clean
:
861 @echo
"This command is intended for maintainers to use;"
862 @echo
"it deletes files that may require special tools to rebuild."
864 clean: do-clean local-clean
865 mostlyclean: do-mostlyclean local-clean
866 distclean: do-distclean local-clean local-distclean
867 maintainer-clean
: local-maintainer-clean do-maintainer-clean local-clean
868 maintainer-clean
: local-distclean
869 realclean: maintainer-clean
871 # This rule is used to clean specific modules.
872 .PHONY
: $(CLEAN_MODULES
) $(CLEAN_X11_MODULES
) clean-gcc
873 $(CLEAN_MODULES
) $(CLEAN_X11_MODULES
) clean-gcc
:
874 @
dir=`echo $@ | sed -e 's/clean-//'`; \
875 if
[ -f .
/$${dir}/Makefile
] ; then \
877 s
=`cd $(srcdir); pwd`; export s
; \
879 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) clean); \
884 .PHONY
: $(CLEAN_TARGET_MODULES
)
885 $(CLEAN_TARGET_MODULES
):
886 @
dir=`echo $@ | sed -e 's/clean-target-//'`; \
887 rm -f
$(TARGET_SUBDIR
)/$${dir}/multilib.out
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
; \
888 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/Makefile
] ; then \
890 s
=`cd $(srcdir); pwd`; export s
; \
892 (cd
$(TARGET_SUBDIR
)/$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) clean); \
897 clean-target
: $(CLEAN_TARGET_MODULES
)
902 check: $(CHECK_MODULES
) \
903 $(CHECK_TARGET_MODULES
) \
904 $(CHECK_X11_MODULES
) \
907 # Installation targets.
909 .PHONY
: install uninstall source-vault binary-vault vault-install
910 install: $(INSTALL_TARGET
)
913 @echo
"the uninstall target is not supported in this tree"
916 $(MAKE
) -f .
/release
/Build-A-Release \
917 host
=$(host_alias
) source-vault
920 $(MAKE
) -f .
/release
/Build-A-Release \
921 host
=$(host_alias
) target
=$(target_alias
)
924 @if
[ -f .
/release
/vault-install
] ; then \
925 .
/release
/vault-install
$(host_alias
) $(target_alias
) ; \
931 install.
all: install-no-fixedincludes
932 @if
[ -f .
/gcc
/Makefile
] ; then \
933 r
=`pwd` ; export r
; \
936 $(MAKE
) $(FLAGS_TO_PASS
) install-headers
) ; \
941 # inet-install is used because the I*Net wants DejaGNU installed but
942 # not built. Similarly, gzip is built but not installed.
944 $(MAKE
) INSTALL_MODULES
="`echo $(INSTALL_MODULES) | sed -e 's/install-dejagnu//' -e 's/install-gzip//'`" install
946 # install-no-fixedincludes is used because Cygnus can not distribute
947 # the fixed header files.
948 .PHONY
: install-no-fixedincludes
949 install-no-fixedincludes
: \
952 $(INSTALL_TARGET_MODULES
) \
953 $(INSTALL_X11_MODULES
) \
956 # Install the gcc headers files, but not the fixed include files,
957 # which Cygnus is not allowed to distribute. This rule is very
958 # dependent on the workings of the gcc Makefile.in.
959 .PHONY
: gcc-no-fixedincludes
960 gcc-no-fixedincludes
:
961 @if
[ -f .
/gcc
/Makefile
]; then \
962 rm -rf gcc
/tmp-include
; \
963 mv gcc
/include gcc
/tmp-include
2>/dev
/null
; \
965 cp
$(srcdir)/gcc
/gsyslimits.h gcc
/include/syslimits.h
; \
966 touch gcc
/stmp-fixinc gcc
/include/fixed
; \
967 rm -f gcc
/stmp-headers gcc
/stmp-int-hdrs
; \
969 s
=`cd $(srcdir); pwd` ; export s
; \
972 $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
973 rm -rf gcc
/include; \
974 mv gcc
/tmp-include gcc
/include 2>/dev
/null
; \
977 # This rule is used to build the modules which use FLAGS_TO_PASS. To
978 # build a target all-X means to cd to X and make all.
980 # all-gui, and all-libproc are handled specially because
981 # they are still experimental, and if they fail to build, that
982 # shouldn't stop "make all".
983 .PHONY
: $(ALL_MODULES
) all-gui all-libproc
984 $(ALL_MODULES
) all-gui all-libproc
:
985 @
dir=`echo $@ | sed -e 's/all-//'`; \
986 if
[ -f .
/$${dir}/Makefile
] ; then \
988 s
=`cd $(srcdir); pwd`; export s
; \
990 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) all); \
995 # These rules are used to check the modules which use FLAGS_TO_PASS.
996 # To build a target check-X means to cd to X and make check. Some
997 # modules are only tested in a native toolchain.
999 .PHONY
: $(CHECK_MODULES
) $(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
1000 $(NATIVE_CHECK_MODULES
):
1001 @if
[ "$(host_canonical)" = "$(target_canonical)" ] ; then \
1002 dir=`echo $@ | sed -e 's/check-//'`; \
1003 if
[ -f .
/$${dir}/Makefile
] ; then \
1004 r
=`pwd`; export r
; \
1005 s
=`cd $(srcdir); pwd`; export s
; \
1007 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
1013 $(CROSS_CHECK_MODULES
):
1014 @
dir=`echo $@ | sed -e 's/check-//'`; \
1015 if
[ -f .
/$${dir}/Makefile
] ; then \
1016 r
=`pwd`; export r
; \
1017 s
=`cd $(srcdir); pwd`; export s
; \
1019 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
1024 # This rule is used to install the modules which use FLAGS_TO_PASS.
1025 # To build a target install-X means to cd to X and make install.
1026 .PHONY
: $(INSTALL_MODULES
)
1027 $(INSTALL_MODULES
): install-dirs
1028 @
dir=`echo $@ | sed -e 's/install-//'`; \
1029 if
[ -f .
/$${dir}/Makefile
] ; then \
1030 r
=`pwd`; export r
; \
1031 s
=`cd $(srcdir); pwd`; export s
; \
1033 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
1038 # This rule is used to configure the modules which are built with the
1040 .PHONY
: $(CONFIGURE_TARGET_MODULES
)
1041 $(CONFIGURE_TARGET_MODULES
):
1042 @
dir=`echo $@ | sed -e 's/configure-target-//'`; \
1043 if
[ -d
$(TARGET_SUBDIR
)/$${dir} ]; then \
1044 r
=`pwd`; export r
; \
1045 $(CC_FOR_TARGET
) --print-multi-lib
> $(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
2> /dev
/null
; \
1046 if
[ -s
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
]; then \
1047 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/multilib.out
]; then \
1048 if cmp
$(TARGET_SUBDIR
)/$${dir}/multilib.out
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
> /dev
/null
; then \
1049 rm -f
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
; \
1051 echo
"Multilibs changed for $${dir}, reconfiguring"; \
1052 rm -f
$(TARGET_SUBDIR
)/$${dir}/multilib.out
$(TARGET_SUBDIR
)/$${dir}/Makefile
; \
1053 mv
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
$(TARGET_SUBDIR
)/$${dir}/multilib.out
; \
1056 mv
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
$(TARGET_SUBDIR
)/$${dir}/multilib.out
; \
1059 fi
; exit
0 # break command into two pieces
1060 @
dir=`echo $@ | sed -e 's/configure-target-//'`; \
1061 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/Makefile
] ; then \
1063 elif echo
" $(TARGET_CONFIGDIRS) " | grep
" $${dir} " >/dev
/null
2>&1; then \
1064 if
[ -d
$(srcdir)/$${dir} ]; then \
1065 [ -d
$(TARGET_SUBDIR
)/$${dir} ] || mkdir
$(TARGET_SUBDIR
)/$${dir};\
1066 r
=`pwd`; export r
; \
1067 s
=`cd $(srcdir); pwd`; export s
; \
1069 AR
="$(AR_FOR_TARGET)"; export AR
; \
1070 AS
="$(AS_FOR_TARGET)"; export AS
; \
1071 CC
="$(CC_FOR_TARGET)"; export CC
; \
1072 CFLAGS
="$(CFLAGS_FOR_TARGET)"; export CFLAGS
; \
1073 CXX
="$(CXX_FOR_TARGET)"; export CXX
; \
1074 CXXFLAGS
="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS
; \
1075 DLLTOOL
="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL
; \
1076 LD
="$(LD_FOR_TARGET)"; export LD
; \
1077 NM
="$(NM_FOR_TARGET)"; export NM
; \
1078 RANLIB
="$(RANLIB_FOR_TARGET)"; export RANLIB
; \
1079 echo Configuring in
$(TARGET_SUBDIR
)/$${dir}; \
1080 cd
$(TARGET_SUBDIR
)/$${dir}; \
1083 topdir
=$(srcdir) ;; \
1085 case
"$(TARGET_SUBDIR)" in \
1086 .
) topdir
="../$(srcdir)" ;; \
1087 *) topdir
="../../$(srcdir)" ;; \
1090 if
[ "$(srcdir)" = "." ] ; then \
1091 if
[ "$(TARGET_SUBDIR)" != "." ] ; then \
1092 if
$(SHELL
) $$s/symlink-tree
$${topdir}/$${dir} "no-such-file" ; then \
1093 if
[ -f Makefile
]; then \
1094 if
$(MAKE
) distclean; then \
1108 srcdiroption
="--srcdir=."; \
1111 srcdiroption
="--srcdir=$${topdir}/$${dir}"; \
1112 libsrcdir
="$$s/$${dir}"; \
1114 if
[ -f
$${libsrcdir}/configure
] ; then \
1115 $(SHELL
) $${libsrcdir}/configure \
1116 $(CONFIG_ARGUMENTS
) $${srcdiroption} \
1117 --with-target-subdir
="$(TARGET_SUBDIR)"; \
1119 $(SHELL
) $$s/configure \
1120 $(CONFIG_ARGUMENTS
) $${srcdiroption} \
1121 --with-target-subdir
="$(TARGET_SUBDIR)"; \
1130 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
1131 # To build a target all-X means to cd to X and make all.
1132 .PHONY
: $(ALL_TARGET_MODULES
)
1133 $(ALL_TARGET_MODULES
):
1134 @
dir=`echo $@ | sed -e 's/all-target-//'`; \
1135 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/Makefile
] ; then \
1136 r
=`pwd`; export r
; \
1137 s
=`cd $(srcdir); pwd`; export s
; \
1139 (cd
$(TARGET_SUBDIR
)/$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) all); \
1144 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
1145 # To build a target install-X means to cd to X and make install.
1146 .PHONY
: $(CHECK_TARGET_MODULES
)
1147 $(CHECK_TARGET_MODULES
):
1148 @
dir=`echo $@ | sed -e 's/check-target-//'`; \
1149 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/Makefile
] ; then \
1150 r
=`pwd`; export r
; \
1151 s
=`cd $(srcdir); pwd`; export s
; \
1153 (cd
$(TARGET_SUBDIR
)/$${dir};$(MAKE
) $(TARGET_FLAGS_TO_PASS
) check);\
1158 # This rule is used to install the modules which use
1159 # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
1161 .PHONY
: $(INSTALL_TARGET_MODULES
)
1162 $(INSTALL_TARGET_MODULES
): install-dirs
1163 @
dir=`echo $@ | sed -e 's/install-target-//'`; \
1164 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/Makefile
] ; then \
1165 r
=`pwd`; export r
; \
1166 s
=`cd $(srcdir); pwd`; export s
; \
1168 (cd
$(TARGET_SUBDIR
)/$${dir}; \
1169 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) install); \
1174 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
1175 # To build a target all-X means to cd to X and make all.
1176 .PHONY
: $(ALL_X11_MODULES
)
1178 @
dir=`echo $@ | sed -e 's/all-//'`; \
1179 if
[ -f .
/$${dir}/Makefile
] ; then \
1180 r
=`pwd`; export r
; \
1181 s
=`cd $(srcdir); pwd`; export s
; \
1184 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) all); \
1189 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
1190 # To build a target check-X means to cd to X and make all.
1191 .PHONY
: $(CHECK_X11_MODULES
)
1192 $(CHECK_X11_MODULES
):
1193 @
dir=`echo $@ | sed -e 's/check-//'`; \
1194 if
[ -f .
/$${dir}/Makefile
] ; then \
1195 r
=`pwd`; export r
; \
1196 s
=`cd $(srcdir); pwd`; export s
; \
1199 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) check); \
1204 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
1205 # To build a target install-X means to cd to X and make install.
1206 .PHONY
: $(INSTALL_X11_MODULES
)
1207 $(INSTALL_X11_MODULES
):
1208 @
dir=`echo $@ | sed -e 's/install-//'`; \
1209 if
[ -f .
/$${dir}/Makefile
] ; then \
1210 r
=`pwd`; export r
; \
1211 s
=`cd $(srcdir); pwd`; export s
; \
1214 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) install); \
1219 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
1222 @if
[ -f .
/gcc
/Makefile
] ; then \
1223 r
=`pwd`; export r
; \
1224 s
=`cd $(srcdir); pwd`; export s
; \
1226 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) all); \
1231 .PHONY
: all-bootstrap
1233 @if
[ -f .
/gcc
/Makefile
] ; then \
1234 r
=`pwd`; export r
; \
1235 s
=`cd $(srcdir); pwd`; export s
; \
1237 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) bootstrap
); \
1244 @if
[ -f .
/gcc
/Makefile
] ; then \
1245 r
=`pwd`; export r
; \
1246 s
=`cd $(srcdir); pwd`; export s
; \
1248 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) check); \
1255 @if
[ -f .
/gcc
/Makefile
] ; then \
1256 r
=`pwd`; export r
; \
1257 s
=`cd $(srcdir); pwd`; export s
; \
1259 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
1265 # EXPERIMENTAL STUFF
1266 # This rule is used to install the modules which use FLAGS_TO_PASS.
1267 # To build a target install-X means to cd to X and make install.
1268 .PHONY
: install-dosrel
1269 install-dosrel
: install-dirs
info
1270 @
dir=`echo $@ | sed -e 's/install-//'`; \
1271 if
[ -f .
/$${dir}/Makefile
] ; then \
1272 r
=`pwd`; export r
; \
1273 s
=`cd $(srcdir); pwd`; export s
; \
1275 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
1280 install-dosrel-fake
:
1283 # This is a list of inter-dependencies among modules.
1285 all-autoconf
: all-m4
1288 all-binutils
: all-libiberty all-opcodes all-bfd all-flex all-byacc
1291 all-dejagnu
: all-tcl all-expect all-tk
1292 all-diff
: all-libiberty
1294 all-emacs19
: all-byacc
1296 configure-target-examples
: $(ALL_GCC
)
1297 all-target-examples
: configure-target-examples
1298 all-expect
: all-tcl all-tk
1299 all-fileutils
: all-libiberty
1301 all-flex
: all-libiberty all-byacc
1302 all-gas
: all-libiberty all-opcodes all-bfd
1306 all-gcc
: all-libiberty all-byacc all-binutils all-gas all-ld
1307 all-bootstrap
: all-libiberty all-byacc all-binutils all-gas all-ld
1308 GDB_TK
= all-tk all-tcl
1309 all-gdb
: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim
$(gdbnlmrequirements
) $(GDB_TK
)
1310 all-gprof
: all-libiberty all-bfd all-opcodes
1311 all-grep
: all-libiberty
1312 all-grez
: all-libiberty all-bfd all-opcodes
1313 all-gui
: all-gdb all-libproc all-target-librx
1315 all-gzip
: all-libiberty
1316 all-hello
: all-libiberty
1318 all-inet
: all-tcl all-send-pr all-perl
1319 all-ispell
: all-emacs19
1320 all-ld
: all-libiberty all-bfd all-opcodes all-byacc all-flex
1321 configure-target-libg
++: $(ALL_GCC
) configure-target-librx
1322 all-target-libg
++: configure-target-libg
++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc
++
1323 configure-target-libgloss
: $(ALL_GCC
)
1324 all-target-libgloss
: configure-target-libgloss configure-target-newlib
1325 configure-target-libio
: $(ALL_GCC
)
1326 all-target-libio
: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
1328 configure-target-librx
: $(ALL_GCC
) configure-target-newlib
1329 all-target-librx
: configure-target-librx
1330 configure-target-libstdc
++: $(ALL_GCC
)
1331 all-target-libstdc
++: configure-target-libstdc
++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
1332 all-m4
: all-libiberty
1333 all-make
: all-libiberty
1335 configure-target-newlib
: $(ALL_GCC
)
1336 all-target-newlib
: configure-target-newlib all-binutils all-gas all-gcc
1337 all-opcodes
: all-bfd all-libiberty
1338 all-patch
: all-libiberty
1340 all-prms
: all-libiberty
1343 all-recode
: all-libiberty
1344 all-sed
: all-libiberty
1345 all-send-pr
: all-prms
1347 all-sim
: all-libiberty all-bfd all-opcodes
1348 all-tar
: all-libiberty
1350 all-tclX
: all-tcl all-tk
1352 all-texinfo
: all-libiberty
1354 all-tgas
: all-libiberty all-bfd all-opcodes
1357 all-target-winsup
: all-target-newlib all-target-libiberty configure-target-winsup
1358 configure-target-winsup
: configure-target-newlib
1359 all-uudecode
: all-libiberty
1360 configure-target-libiberty
: $(ALL_GCC
)
1361 all-target-libiberty
: configure-target-libiberty all-gcc all-ld all-target-newlib
1362 all-target
: $(ALL_TARGET_MODULES
)
1363 install-target
: $(INSTALL_TARGET_MODULES
)
1365 ### other supporting targets
1370 .PHONY
: install-dirs
1372 @for i in
$(MAKEDIRS
) ; do \
1373 echo Making
$$i...
; \
1374 parent
=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
1375 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
; \
1376 if
[ ! -d
$$i ] ; then \
1377 if mkdir
$$i ; then \
1388 dir.
info: do-install-info
1389 if
[ -f
$(srcdir)/texinfo
/gen-info-dir
] ; then \
1390 $(srcdir)/texinfo
/gen-info-dir
$(infodir) $(srcdir)/texinfo
/dir.info-template
> dir.
info.new
; \
1391 mv
-f
dir.
info.new
dir.
info ; \
1396 @echo
"Building a full distribution of this tree isn't done"
1397 @echo
"via 'make dist'. Check out the etc/ subdirectory"
1401 # Right now this just builds TAGS in each subdirectory. emacs19 has the
1402 # ability to use several tags files at once, so there is probably no need
1403 # to combine them into one big TAGS file (like CVS 1.3 does). We could
1404 # (if we felt like it) have this Makefile write a piece of elisp which
1405 # the user could load to tell emacs19 where all the TAGS files we just
1409 # with the gnu make, this is done automatically.
1411 Makefile
: Makefile.in configure.in
$(host_makefile_frag
) $(target_makefile_frag
)
1412 $(SHELL
) .
/config.status
1415 # Support for building net releases
1417 # Files in devo used in any net release.
1418 # ChangeLog omitted because it may refer to files which are not in this
1419 # distribution (perhaps it would be better to include it anyway).
1420 DEVO_SUPPORT
= README Makefile.in configure configure.in \
1421 config.guess config.sub config move-if-change \
1422 mpw-README mpw-build.in mpw-config.in mpw-configure \
1423 COPYING COPYING.LIB
install.sh config-ml.in symlink-tree
1425 # Files in devo/etc used in any net release.
1426 # ChangeLog omitted because it may refer to files which are not in this
1427 # distribution (perhaps it would be better to include it anyway).
1428 ETC_SUPPORT
= Makefile.in cfg-paper.texi configure configure.in configure.man \
1429 configure.texi standards.texi make-stds.texi \
1430 configure.
info* standards.
info* cfg-paper.
info*
1432 # When you use `make setup-dirs' or `make taz' you should always redefine
1434 SUPPORT_FILES
= list-of-support-files-for-tool-in-question
1435 # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
1436 DISTBISONFILES
= binutils
/Makefile.in gas
/Makefile.in gdb
/Makefile.in
1440 taz
: $(DEVO_SUPPORT
) $(SUPPORT_FILES
) \
1441 texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1442 # Make sure "diststuff" files get built properly.
1443 for f in
$(DISTBISONFILES
) ; do \
1444 if
[ -r
$$f ]; then \
1445 sed
'/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp
; \
1449 # Take out texinfo from a few places; make simple BISON=bison line.
1450 sed
-e
'/^all\.normal: /s/\all-texinfo //' \
1451 -e
'/^ install-texinfo /d' \
1452 -e
'/^BISON = /,/^$$/d' \
1453 -e
'/^# BISON:/s/.*/BISON = bison -y/' \
1455 mv
-f tmp Makefile.in
1457 $(start-sanitize-Sanitize
)
1458 @if
[ -f .Sanitize
] ; then echo
"RUN Sanitize FIRST!" ; false
; fi
;
1459 $(end-sanitize-Sanitize
)
1461 [ -z
"$(CONFIGURE_TARGET_MODULES)" ] \
1462 ||
$(MAKE
) $(CONFIGURE_TARGET_MODULES
) ALL_GCC
="" \
1463 CC_FOR_TARGET
="$(CC)" CXX_FOR_TARGET
="$(CXX)"
1464 # Make links, and run "make diststuff" or "make info" when needed.
1465 rm -rf proto-toplev
; mkdir proto-toplev
1466 set
-e
; dirs
="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1467 for d in
$$dirs ; do \
1468 if
[ -d
$$d ]; then \
1469 if
[ ! -f
$$d/Makefile
] ; then true
; \
1470 elif grep
'^diststuff:' $$d/Makefile
>/dev
/null
; then \
1471 (cd
$$d ; $(MAKE
) diststuff
) || exit
1 ; \
1472 elif grep
'^info:' $$d/Makefile
>/dev
/null
; then \
1473 (cd
$$d ; $(MAKE
) info ) || exit
1 ; \
1475 if
[ -d
$$d/proto-
$$d.
dir ]; then \
1476 ln
-s ..
/$$d/proto-
$$d.
dir proto-toplev
/$$d ; \
1478 ln
-s ..
/$$d proto-toplev
/$$d ; \
1480 else ln
-s ..
/$$d proto-toplev
/$$d ; fi
; \
1482 cd etc
; $(MAKE
) info
1485 mkdir proto-toplev
/etc
1486 (cd proto-toplev
/etc
; \
1487 for i in
$(ETC_SUPPORT
); do \
1488 ln
-s ..
/..
/etc
/$$i .
; \
1491 # Take out texinfo from configurable dirs
1492 rm proto-toplev
/configure.in
1493 sed
-e
'/^host_tools=/s/texinfo //' \
1494 <configure.in
>proto-toplev
/configure.in
1496 mkdir proto-toplev
/texinfo
1497 ln
-s ..
/..
/texinfo
/texinfo.
tex proto-toplev
/texinfo
/
1498 ln
-s ..
/..
/texinfo
/gpl.texinfo proto-toplev
/texinfo
/
1499 ln
-s ..
/..
/texinfo
/lgpl.texinfo proto-toplev
/texinfo
/
1500 if
test -r texinfo
/util
/tex3patch
; then \
1501 mkdir proto-toplev
/texinfo
/util
&& \
1502 ln
-s ..
/..
/..
/texinfo
/util
/tex3patch proto-toplev
/texinfo
/util
; \
1504 chmod og
=u
`find . -print`
1505 $(MAKE
) -f Makefile.in do-tar-gz TOOL
=$(TOOL
) \
1506 VER
=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`
1509 echo
"==> Making $(TOOL)-$(VER).tar.gz"
1510 -rm -f
$(TOOL
)-$(VER
)
1511 ln
-s proto-toplev
$(TOOL
)-$(VER
)
1512 tar cfh
$(TOOL
)-$(VER
).
tar $(TOOL
)-$(VER
)
1513 $(GZIPPROG
) -v
-9 $(TOOL
)-$(VER
).
tar
1515 TEXINFO_SUPPORT
= texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1516 DIST_SUPPORT
= $(DEVO_SUPPORT
) $(TEXINFO_SUPPORT
)
1519 GAS_SUPPORT_DIRS
= bfd
include libiberty opcodes make-all.com setup.com
1520 gas.
tar.gz
: $(DIST_SUPPORT
) $(GAS_SUPPORT_DIRS
) gas
1521 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1522 SUPPORT_FILES
="$(GAS_SUPPORT_DIRS)"
1524 # The FSF "binutils" release includes gprof and ld.
1525 .PHONY
: binutils.
tar.gz
1526 BINUTILS_SUPPORT_DIRS
= bfd gas
include libiberty opcodes
ld gprof make-all.com setup.com
1527 binutils.
tar.gz
: $(DIST_SUPPORT
) $(BINUTILS_SUPPORT_DIRS
) binutils
1528 $(MAKE
) -f Makefile.in taz TOOL
=binutils \
1529 SUPPORT_FILES
="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1531 .PHONY
: gas
+binutils.
tar.gz
1532 GASB_SUPPORT_DIRS
= $(GAS_SUPPORT_DIRS
) binutils
ld gprof
1533 gas
+binutils.
tar.gz
: $(DIST_SUPPORT
) $(GASB_SUPPORT_DIRS
) gas
1534 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1535 SUPPORT_FILES
="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1537 .PHONY
: libg
++.
tar.gz
1538 LIBGXX_SUPPORT_DIRS
=include libstdc
++ libio librx libiberty
1539 libg
++.
tar.gz
: $(DIST_SUPPORT
) libg
++
1540 $(MAKE
) -f Makefile.in taz TOOL
=libg
++ \
1541 SUPPORT_FILES
="$(LIBGXX_SUPPORT_DIRS)"
1543 GNATS_SUPPORT_DIRS
=include libiberty send-pr
1544 gnats.
tar.gz
: $(DIST_SUPPORT
) $(GNATS_SUPPORT_DIRS
) gnats
1545 $(MAKE
) -f Makefile.in taz TOOL
=gnats \
1546 SUPPORT_FILES
="$(GNATS_SUPPORT_DIRS)"
1549 GDB_SUPPORT_DIRS
= bfd
include libiberty mmalloc opcodes readline sim utils
1550 GDBTK_SUPPORT_DIRS
= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
1551 gdb.
tar.gz
: $(DIST_SUPPORT
) $(GDB_SUPPORT_DIRS
) gdb
1552 $(MAKE
) -f Makefile.in taz TOOL
=gdb \
1553 SUPPORT_FILES
="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
1555 .PHONY
: newlib.
tar.gz
1556 NEWLIB_SUPPORT_DIRS
=libgloss
1557 # taz configures for the sun4 target which won't configure newlib.
1558 # We need newlib configured so that the .info files are made.
1559 # Unfortunately, it is not enough to just configure newlib separately:
1560 # taz will build the .info files but since SUBDIRS won't contain newlib,
1561 # distclean won't be run (leaving Makefile, config.status, and the tmp files
1562 # used in building the .info files, eg: *.def, *.ref).
1563 # The problem isn't solvable however without a lot of extra work because
1564 # target libraries are built in subdir $(target_alias) which gets nuked during
1565 # the make distclean. For now punt on the issue of shipping newlib info files
1566 # with newlib net releases and wait for a day when some native target (sun4?)
1567 # supports newlib (if only minimally).
1568 newlib.
tar.gz
: $(DIST_SUPPORT
) $(NEWLIB_SUPPORT_DIRS
) newlib
1569 $(MAKE
) -f Makefile.in taz TOOL
=newlib \
1570 SUPPORT_FILES
="$(NEWLIB_SUPPORT_DIRS)" \
1571 DEVO_SUPPORT
="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
1575 # start-sanitize-chill
1576 ## This is ugly, but I don't want GNU make to put these variables in
1577 ## the environment. Older makes will see this as a set of targets
1578 ## with no dependencies and no actions.
1579 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET
:
1580 # end-sanitize-chill
1582 # end of Makefile.in