2 # Makefile for directory with subdirs to build.
3 # Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
5 # This file is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24 exec_prefix = $(prefix)
25 bindir = $(exec_prefix)/bin
26 libdir = $(exec_prefix)/lib
27 tooldir
= $(exec_prefix)/$(target
)
29 program_transform_name
=
31 datadir = $(prefix)/share
32 mandir = $(prefix)/man
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
42 infodir = $(prefix)/info
43 includedir = $(prefix)/include
48 INSTALL
= $$s/install.sh
-c
49 INSTALL_PROGRAM
= $(INSTALL
)
50 INSTALL_DATA
= $(INSTALL
) -m
644
51 INSTALL_XFORM
= $(INSTALL
) -t
='$(program_transform_name)'
53 INSTALL_DOSREL
= install-dosrel-fake
60 # Special variables passed down in EXTRA_GCC_FLAGS. They are defined
61 # here so that they can be overridden by Makefile fragments.
62 HOST_CC
= $(CC_FOR_BUILD
)
64 HOST_PREFIX_1
= loser-
66 # We don't specify -g -O because many compilers don't support -g -O,
67 # and/or -O is broken in and of itself.
70 CFLAGS_FOR_TARGET
= $(CFLAGS
)
71 LIBCFLAGS_FOR_TARGET
= $(CFLAGS_FOR_TARGET
)
75 # start-sanitize-chill
76 CHILLFLAGS
= $(CFLAGS
)
81 # Use -O2 to stress test the compiler.
83 LIBCXXFLAGS
= $(CXXFLAGS
) -fno-implicit-templates
84 CXXFLAGS_FOR_TARGET
= $(CXXFLAGS
)
85 LIBCXXFLAGS_FOR_TARGET
= $(CXXFLAGS_FOR_TARGET
) -fno-implicit-templates
92 # Not plain GZIP, since gzip looks there for extra command-line options.
95 # These values are substituted by configure.
99 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
100 BISON
= `if [ -f $$r/byacc/byacc ] ; \
101 then echo $$r/byacc/byacc ; \
102 else echo ${DEFAULT_YACC} ; \
105 LEX
= `if [ -f $$r/flex/flex ] ; \
106 then echo $$r/flex/flex ; \
107 else echo ${DEFAULT_LEX} ; fi`
109 M4
= `if [ -f $$r/m4/m4 ] ; \
110 then echo $$r/m4/m4 ; \
113 MAKEINFO
= `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
114 then echo $$r/texinfo/makeinfo/makeinfo ; \
115 else echo makeinfo ; fi`
117 # This just becomes part of the MAKEINFO definition passed down to
118 # sub-makes. It lets flags be given on the command line while still
119 # using the makeinfo from the object tree.
122 EXPECT
= `if [ -f $$r/expect/expect ] ; \
123 then echo $$r/expect/expect ; \
124 else echo expect ; fi`
126 RUNTEST
= `if [ -f $$s/dejagnu/runtest ] ; \
127 then echo $$s/dejagnu/runtest ; \
128 else echo runtest ; fi`
131 # compilers to use to create programs which must be run in the build
134 CXX_FOR_BUILD
= $(CXX
)
136 SUBDIRS
= "this is set via configure, don't edit this"
139 # This is set by the configure script to the list of directories which
140 # should be built using the target tools.
141 TARGET_CONFIGDIRS
= libiberty libgloss newlib libio librx libstdc
++ libg
++ winsup
143 # Target libraries are put under this directory:
144 # Changed by configure to $(target_alias) if cross.
147 # This is set by the configure script to the arguments passed to configure.
150 # This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
154 # This is the name of the environment variable used for the path to
155 # the libraries. This may be changed by configure.in.
156 RPATH_ENVVAR
= LD_LIBRARY_PATH
158 # configure.in sets SET_LIB_PATH to this if --enable-shared was used.
159 REALLY_SET_LIB_PATH
= \
160 $(RPATH_ENVVAR
)=$$r/bfd
:$$r/opcodes
:$$$(RPATH_ENVVAR
); \
161 export $(RPATH_ENVVAR
);
164 INSTALL_TARGET
= install-dirs \
166 $(INSTALL_TARGET_MODULES
) \
167 $(INSTALL_X11_MODULES
) \
173 if [ -f $$r/gcc/xgcc ] ; then \
174 if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
175 if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
176 echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
178 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
181 echo $$r/gcc/xgcc -B$$r/gcc/; \
184 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
187 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
191 # If CC_FOR_TARGET is not overriden on the command line, then this
192 # variable is passed down to the gcc Makefile, where it is used to
193 # build libgcc2.a. We define it here so that it can itself be
194 # overridden on the command line.
195 GCC_FOR_TARGET
= $$r/gcc
/xgcc
-B
$$r/gcc
/
197 # start-sanitize-chill
198 CHILL_FOR_TARGET
= ` \
199 if [ -f $$r/gcc/xgcc ] ; then \
200 echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
202 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
205 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
212 if [ -f $$r/gcc/xgcc ] ; then \
213 if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
214 if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
215 echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
217 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
220 echo $$r/gcc/xgcc -B$$r/gcc/; \
223 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
226 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
231 if [ -f $$r/gas/as.new ] ; then \
232 echo $$r/gas/as.new ; \
234 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
237 t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
242 if [ -f $$r/ld/ld.new ] ; then \
243 echo $$r/ld/ld.new ; \
245 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
248 t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
252 DLLTOOL_FOR_TARGET
= ` \
253 if [ -f $$r/binutils/dlltool ] ; then \
254 echo $$r/binutils/dlltool ; \
256 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
259 t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
264 if [ -f $$r/binutils/ar ] ; then \
265 echo $$r/binutils/ar ; \
267 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
270 t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
274 RANLIB_FOR_TARGET
= ` \
275 if [ -f $$r/binutils/ranlib ] ; then \
276 echo $$r/binutils/ranlib ; \
278 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
281 t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
286 if [ -f $$r/binutils/nm.new ] ; then \
287 echo $$r/binutils/nm.new ; \
289 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
292 t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
296 #### host and target specific makefile fragments come in here.
299 # Flags to pass down to all sub-makes.
300 # Please keep these in alphabetical order.
301 BASE_FLAGS_TO_PASS
= \
302 "AR_FLAGS=$(AR_FLAGS)" \
303 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
304 "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
306 "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
307 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
309 "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
310 $(start-sanitize-chill
)\
311 "CHILLFLAGS=$(CHILLFLAGS)" \
312 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
313 "CHILL_LIB=$(CHILL_LIB)" \
314 $(end-sanitize-chill
)\
315 "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
316 "CXXFLAGS=$(CXXFLAGS)" \
317 "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
318 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
319 "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
320 "INSTALL=$(INSTALL)" \
321 "INSTALL_DATA=$(INSTALL_DATA)" \
322 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
323 "INSTALL_XFORM=$(INSTALL_XFORM)" \
324 "LDFLAGS=$(LDFLAGS)" \
326 "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
327 "LIBCFLAGS=$(LIBCFLAGS)" \
328 "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
329 "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
330 "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
333 "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
334 "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
335 "PICFLAG=$(PICFLAG)" \
336 "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
337 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
340 "RUNTEST=$(RUNTEST)" \
341 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
343 "exec_prefix=$(exec_prefix)" \
347 # Flags to pass down to most sub-makes, in which we're building with
348 # the host environment.
349 # If any variables are added here, they must be added to do-*, below.
355 'DLLTOOL=$(DLLTOOL)' \
360 FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_HOST_FLAGS
) $(HOST_FLAGS
)
362 # Flags that are concerned with the location of the X11 include files
365 # NOTE: until the top-level is getting the values via autoconf, it only
366 # causes problems to have this top-level Makefile overriding the autoconf-set
367 # values in child directories. Only variables that don't conflict with
368 # autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
370 X11_FLAGS_TO_PASS
= \
371 'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
372 'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
374 # Flags to pass down to makes which are built with the target environment.
375 # The double $ decreases the length of the command line; the variables
376 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
377 # If any variables are added here, they must be added to do-*, below.
378 EXTRA_TARGET_FLAGS
= \
379 'AR=$$(AR_FOR_TARGET)' \
380 'AS=$$(AS_FOR_TARGET)' \
381 'CC=$$(CC_FOR_TARGET)' \
382 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
383 'CXX=$$(CXX_FOR_TARGET)' \
384 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
385 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
386 'LD=$$(LD_FOR_TARGET)' \
387 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
388 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
389 'NM=$$(NM_FOR_TARGET)' \
390 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
391 'RANLIB=$$(RANLIB_FOR_TARGET)'
393 TARGET_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_TARGET_FLAGS
)
395 # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
396 # unfortunately needs the native compiler and the target ar and
398 # If any variables are added here, they must be added to do-*, below.
399 # The HOST_* variables are a special case, which are used for the gcc
400 # cross-building scheme.
401 # The condition for setting GCC_FOR_TARGET is so that if CC_FOR_TARGET
402 # is overridden on the command line we use that value for
403 # GCC_FOR_TARGET, and, if it is not, we use the value of
404 # GCC_FOR_TARGET. We do this because the default value of
405 # CC_FOR_TARGET depends on gcc/xgcc, which won't exist when we first
406 # go into the gcc directory. FIXME: The test won't work correctly for
407 # older non-Posix make programs that do not set MAKEFLAGS; in that
408 # case, overriding CC_FOR_TARGET on the command line will not affect
411 'AR=$$(AR_FOR_TARGET)' \
415 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
416 'HOST_CC=$(CC_FOR_BUILD)' \
417 'HOST_PREFIX=$(HOST_PREFIX)' \
418 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
420 'RANLIB=$$(RANLIB_FOR_TARGET)' \
421 'GCC_FOR_TARGET=$(GCC_FOR_TARGET)' \
422 `if test x"$(LANGUAGES)" != x; then echo "LANGUAGES=$(LANGUAGES)"; fi` \
423 `if test x"$(STMP_FIXPROTO)" != x; then echo "STMP_FIXPROTO=$(STMP_FIXPROTO)"; fi` \
424 `if test x"$(LIMITS_H_TEST)" != x; then echo "LIMITS_H_TEST=$(LIMITS_H_TEST)"; fi` \
425 `if test x"$(LIBGCC1_TEST)" != x; then echo "LIBGCC1_TEST=$(LIBGCC1_TEST)"; fi` \
426 `if test x"$(LIBGCC2_CFLAGS)" != x; then echo "LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)"; fi` \
427 `if test x"$(LIBGCC2_INCLUDES)" != x; then echo "LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)"; fi` \
428 `if test x"$(ENQUIRE)" != x; then echo "ENQUIRE=$(ENQUIRE)"; fi` \
429 `if test x"$(BOOT_CFLAGS)" != x; then echo "BOOT_CFLAGS=$(BOOT_CFLAGS)"; fi`
431 GCC_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_GCC_FLAGS
)
433 # This is a list of the targets for all of the modules which are compiled
434 # using $(FLAGS_TO_PASS).
486 # This is a list of the check targets for all of the modules which are
487 # compiled using $(FLAGS_TO_PASS).
489 # The list is in two parts. The first lists those tools which
490 # are tested as part of the host's native tool-chain, and not
491 # tested in a cross configuration.
492 NATIVE_CHECK_MODULES
= \
496 CROSS_CHECK_MODULES
= \
542 CHECK_MODULES
=$(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
544 # This is a list of the install targets for all of the modules which are
545 # compiled using $(FLAGS_TO_PASS).
596 # This is a list of the targets for all of the modules which are compiled
597 # using $(X11_FLAGS_TO_PASS).
608 # This is a list of the check targets for all of the modules which are
609 # compiled using $(X11_FLAGS_TO_PASS).
610 CHECK_X11_MODULES
= \
619 # This is a list of the install targets for all the modules which are
620 # compiled using $(X11_FLAGS_TO_PASS).
621 INSTALL_X11_MODULES
= \
631 # This is a list of the targets for all of the modules which are compiled
632 # using $(TARGET_FLAGS_TO_PASS).
633 ALL_TARGET_MODULES
= \
635 all-target-libstdc
++ \
640 all-target-libgloss \
641 all-target-libiberty \
644 # This is a list of the configure targets for all of the modules which
645 # are compiled using the target tools.
646 CONFIGURE_TARGET_MODULES
= \
647 configure-target-libio \
648 configure-target-libstdc
++ \
649 configure-target-librx \
650 configure-target-libg
++ \
651 configure-target-newlib \
652 configure-target-winsup \
653 configure-target-libgloss \
654 configure-target-libiberty \
655 configure-target-examples
657 # This is a list of the check targets for all of the modules which are
658 # compiled using $(TARGET_FLAGS_TO_PASS).
659 CHECK_TARGET_MODULES
= \
661 check-target-libstdc
++ \
662 check-target-libg
++ \
663 check-target-newlib \
664 check-target-winsup \
665 check-target-libiberty
667 # This is a list of the install targets for all of the modules which are
668 # compiled using $(TARGET_FLAGS_TO_PASS).
669 INSTALL_TARGET_MODULES
= \
670 install-target-libio \
671 install-target-libstdc
++ \
672 install-target-libg
++ \
673 install-target-newlib \
674 install-target-winsup \
675 install-target-libgloss \
676 install-target-libiberty
678 # This is a list of the targets for which we can do a clean-{target}.
730 # All of the target modules that can be cleaned
731 CLEAN_TARGET_MODULES
= \
733 clean-target-libstdc
++ \
735 clean-target-libg
++ \
736 clean-target-newlib \
737 clean-target-winsup \
738 clean-target-libgloss \
739 clean-target-libiberty \
740 clean-target-examples
742 # All of the x11 modules that can be cleaned
743 CLEAN_X11_MODULES
= \
753 # The first rule in the file had better be this one. Don't put any above it.
757 # The target built for a native build.
761 $(ALL_TARGET_MODULES
) \
765 # Do a target for all the subdirectories. A ``make do-X'' will do a
766 # ``make X'' in all subdirectories (because, in general, there is a
767 # dependency (below) of X upon do-X, a ``make X'' will also do this,
768 # but it may do additional work as well).
769 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
770 # because it is so large that it can easily overflow the command line
771 # length limit on some systems.
780 do-maintainer-clean \
784 @target
=`echo $@ | sed -e 's/^do-//'`; \
786 s
=`cd $(srcdir); pwd`; export s
; \
788 for i in
$(SUBDIRS
) -dummy-
; do \
789 if
[ -f .
/$$i/Makefile
]; then \
792 for flag in
$(EXTRA_GCC_FLAGS
); do \
793 eval
`echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
797 for flag in
$(EXTRA_HOST_FLAGS
); do \
798 eval
`echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
802 export AR AS CC CXX NM RANLIB DLLTOOL
; \
804 $(MAKE
) $(BASE_FLAGS_TO_PASS
) "AR=$${AR}" "AS=$${AS}" \
805 "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
806 "RANLIB=$${RANLIB}" \
807 "DLLTOOL=$${DLLTOOL}" \
809 then true
; else exit
1; fi
; \
812 @target
=`echo $@ | sed -e 's/^do-//'`; \
814 s
=`cd $(srcdir); pwd`; export s
; \
816 for i in
$(TARGET_CONFIGDIRS
) -dummy-
; do \
817 if
[ -f
$(TARGET_SUBDIR
)/$$i/Makefile
]; then \
818 for flag in
$(EXTRA_TARGET_FLAGS
); do \
819 eval
`echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
821 export AR AS CC CXX NM RANLIB DLLTOOL
; \
822 if
(cd
$(TARGET_SUBDIR
)/$$i; \
823 $(MAKE
) $(BASE_FLAGS_TO_PASS
) "AR=$${AR}" "AS=$${AS}" \
824 "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
825 "RANLIB=$${RANLIB}" \
826 "DLLTOOL=$${DLLTOOL}" \
828 then true
; else exit
1; fi
; \
832 # Here are the targets which correspond to the do-X targets.
834 .PHONY
: info installcheck dvi install-info
835 .PHONY
: clean distclean mostlyclean maintainer-clean
realclean
836 .PHONY
: local-clean local-distclean local-maintainer-clean
838 installcheck: do-installcheck
841 install-info
: do-install-info
dir.
info
842 s
=`cd $(srcdir); pwd`; export s
; \
843 if
[ -f
dir.
info ] ; then \
844 $(INSTALL_DATA
) dir.
info $(infodir)/dir.
info ; \
848 -rm -f
*.a TEMP errs core
*.o
*~ \
#* TAGS *.E
851 -rm -f Makefile config.status
852 -if
[ "$(TARGET_SUBDIR)" != "." ]; then \
853 rm -rf
$(TARGET_SUBDIR
); \
856 local-maintainer-clean
:
857 @echo
"This command is intended for maintainers to use;"
858 @echo
"it deletes files that may require special tools to rebuild."
860 clean: do-clean local-clean
861 mostlyclean: do-mostlyclean local-clean
862 distclean: do-distclean local-clean local-distclean
863 maintainer-clean
: local-maintainer-clean do-maintainer-clean local-clean
864 maintainer-clean
: local-distclean
865 realclean: maintainer-clean
867 # This rule is used to clean specific modules.
868 .PHONY
: $(CLEAN_MODULES
) $(CLEAN_X11_MODULES
) clean-gcc
869 $(CLEAN_MODULES
) $(CLEAN_X11_MODULES
) clean-gcc
:
870 @
dir=`echo $@ | sed -e 's/clean-//'`; \
871 if
[ -f .
/$${dir}/Makefile
] ; then \
873 s
=`cd $(srcdir); pwd`; export s
; \
875 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) clean); \
880 .PHONY
: $(CLEAN_TARGET_MODULES
)
881 $(CLEAN_TARGET_MODULES
):
882 @
dir=`echo $@ | sed -e 's/clean-target-//'`; \
883 rm -f
$(TARGET_SUBDIR
)/$${dir}/multilib.out
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
; \
884 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/Makefile
] ; then \
886 s
=`cd $(srcdir); pwd`; export s
; \
888 (cd
$(TARGET_SUBDIR
)/$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) clean); \
893 clean-target
: $(CLEAN_TARGET_MODULES
)
898 check: $(CHECK_MODULES
) \
899 $(CHECK_TARGET_MODULES
) \
900 $(CHECK_X11_MODULES
) \
903 # Installation targets.
905 .PHONY
: install uninstall source-vault binary-vault vault-install
906 install: $(INSTALL_TARGET
)
909 @echo
"the uninstall target is not supported in this tree"
912 $(MAKE
) -f .
/release
/Build-A-Release \
913 host
=$(host_alias
) source-vault
916 $(MAKE
) -f .
/release
/Build-A-Release \
917 host
=$(host_alias
) target
=$(target_alias
)
920 @if
[ -f .
/release
/vault-install
] ; then \
921 .
/release
/vault-install
$(host_alias
) $(target_alias
) ; \
927 install.
all: install-no-fixedincludes
928 @if
[ -f .
/gcc
/Makefile
] ; then \
929 r
=`pwd` ; export r
; \
932 $(MAKE
) $(FLAGS_TO_PASS
) install-headers
) ; \
937 # inet-install is used because the I*Net wants DejaGNU installed but
938 # not built. Similarly, gzip is built but not installed.
940 $(MAKE
) INSTALL_MODULES
="`echo $(INSTALL_MODULES) | sed -e 's/install-dejagnu//' -e 's/install-gzip//'`" install
942 # install-no-fixedincludes is used because Cygnus can not distribute
943 # the fixed header files.
944 .PHONY
: install-no-fixedincludes
945 install-no-fixedincludes
: \
948 $(INSTALL_TARGET_MODULES
) \
949 $(INSTALL_X11_MODULES
) \
952 # Install the gcc headers files, but not the fixed include files,
953 # which Cygnus is not allowed to distribute. This rule is very
954 # dependent on the workings of the gcc Makefile.in.
955 .PHONY
: gcc-no-fixedincludes
956 gcc-no-fixedincludes
:
957 @if
[ -f .
/gcc
/Makefile
]; then \
958 rm -rf gcc
/tmp-include
; \
959 mv gcc
/include gcc
/tmp-include
2>/dev
/null
; \
961 cp
$(srcdir)/gcc
/gsyslimits.h gcc
/include/syslimits.h
; \
962 touch gcc
/stmp-fixinc gcc
/include/fixed
; \
963 rm -f gcc
/stmp-headers gcc
/stmp-int-hdrs
; \
965 s
=`cd $(srcdir); pwd` ; export s
; \
968 $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
969 rm -rf gcc
/include; \
970 mv gcc
/tmp-include gcc
/include 2>/dev
/null
; \
973 # This rule is used to build the modules which use FLAGS_TO_PASS. To
974 # build a target all-X means to cd to X and make all.
976 # all-gui, and all-libproc are handled specially because
977 # they are still experimental, and if they fail to build, that
978 # shouldn't stop "make all".
979 .PHONY
: $(ALL_MODULES
) all-gui all-libproc
980 $(ALL_MODULES
) all-gui all-libproc
:
981 @
dir=`echo $@ | sed -e 's/all-//'`; \
982 if
[ -f .
/$${dir}/Makefile
] ; then \
984 s
=`cd $(srcdir); pwd`; export s
; \
986 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) all); \
991 # These rules are used to check the modules which use FLAGS_TO_PASS.
992 # To build a target check-X means to cd to X and make check. Some
993 # modules are only tested in a native toolchain.
995 .PHONY
: $(CHECK_MODULES
) $(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
996 $(NATIVE_CHECK_MODULES
):
997 @if
[ "$(host_canonical)" = "$(target_canonical)" ] ; then \
998 dir=`echo $@ | sed -e 's/check-//'`; \
999 if
[ -f .
/$${dir}/Makefile
] ; then \
1000 r
=`pwd`; export r
; \
1001 s
=`cd $(srcdir); pwd`; export s
; \
1003 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
1009 $(CROSS_CHECK_MODULES
):
1010 @
dir=`echo $@ | sed -e 's/check-//'`; \
1011 if
[ -f .
/$${dir}/Makefile
] ; then \
1012 r
=`pwd`; export r
; \
1013 s
=`cd $(srcdir); pwd`; export s
; \
1015 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
1020 # This rule is used to install the modules which use FLAGS_TO_PASS.
1021 # To build a target install-X means to cd to X and make install.
1022 .PHONY
: $(INSTALL_MODULES
)
1023 $(INSTALL_MODULES
): install-dirs
1024 @
dir=`echo $@ | sed -e 's/install-//'`; \
1025 if
[ -f .
/$${dir}/Makefile
] ; then \
1026 r
=`pwd`; export r
; \
1027 s
=`cd $(srcdir); pwd`; export s
; \
1029 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
1034 # This rule is used to configure the modules which are built with the
1036 .PHONY
: $(CONFIGURE_TARGET_MODULES
)
1037 $(CONFIGURE_TARGET_MODULES
):
1038 @
dir=`echo $@ | sed -e 's/configure-target-//'`; \
1039 if
[ -d
$(TARGET_SUBDIR
)/$${dir} ]; then \
1040 r
=`pwd`; export r
; \
1041 $(CC_FOR_TARGET
) --print-multi-lib
> $(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
2> /dev
/null
; \
1042 if
[ -s
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
]; then \
1043 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/multilib.out
]; then \
1044 if cmp
$(TARGET_SUBDIR
)/$${dir}/multilib.out
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
> /dev
/null
; then \
1045 rm -f
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
; \
1047 echo
"Multilibs changed for $${dir}, reconfiguring"; \
1048 rm -f
$(TARGET_SUBDIR
)/$${dir}/multilib.out
$(TARGET_SUBDIR
)/$${dir}/Makefile
; \
1049 mv
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
$(TARGET_SUBDIR
)/$${dir}/multilib.out
; \
1052 mv
$(TARGET_SUBDIR
)/$${dir}/tmpmulti.out
$(TARGET_SUBDIR
)/$${dir}/multilib.out
; \
1055 fi
; exit
0 # break command into two pieces
1056 @
dir=`echo $@ | sed -e 's/configure-target-//'`; \
1057 if
[ ! -d
$(TARGET_SUBDIR
) ]; then \
1059 elif
[ -f
$(TARGET_SUBDIR
)/$${dir}/Makefile
] ; then \
1061 elif echo
" $(TARGET_CONFIGDIRS) " | grep
" $${dir} " >/dev
/null
2>&1; then \
1062 if
[ -d
$(srcdir)/$${dir} ]; then \
1063 [ -d
$(TARGET_SUBDIR
)/$${dir} ] || mkdir
$(TARGET_SUBDIR
)/$${dir};\
1064 r
=`pwd`; export r
; \
1065 s
=`cd $(srcdir); pwd`; export s
; \
1067 AR
="$(AR_FOR_TARGET)"; export AR
; \
1068 AS
="$(AS_FOR_TARGET)"; export AS
; \
1069 CC
="$(CC_FOR_TARGET)"; export CC
; \
1070 CFLAGS
="$(CFLAGS_FOR_TARGET)"; export CFLAGS
; \
1071 CXX
="$(CXX_FOR_TARGET)"; export CXX
; \
1072 CXXFLAGS
="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS
; \
1073 DLLTOOL
="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL
; \
1074 LD
="$(LD_FOR_TARGET)"; export LD
; \
1075 NM
="$(NM_FOR_TARGET)"; export NM
; \
1076 RANLIB
="$(RANLIB_FOR_TARGET)"; export RANLIB
; \
1077 echo Configuring in
$(TARGET_SUBDIR
)/$${dir}; \
1078 cd
$(TARGET_SUBDIR
)/$${dir}; \
1081 topdir
=$(srcdir) ;; \
1083 case
"$(TARGET_SUBDIR)" in \
1084 .
) topdir
="../$(srcdir)" ;; \
1085 *) topdir
="../../$(srcdir)" ;; \
1088 if
[ "$(srcdir)" = "." ] ; then \
1089 if
[ "$(TARGET_SUBDIR)" != "." ] ; then \
1090 if
$(SHELL
) $$s/symlink-tree
$${topdir}/$${dir} "no-such-file" ; then \
1091 if
[ -f Makefile
]; then \
1092 if
$(MAKE
) distclean; then \
1106 srcdiroption
="--srcdir=."; \
1109 srcdiroption
="--srcdir=$${topdir}/$${dir}"; \
1110 libsrcdir
="$$s/$${dir}"; \
1112 if
[ -f
$${libsrcdir}/configure
] ; then \
1113 $(SHELL
) $${libsrcdir}/configure \
1114 $(CONFIG_ARGUMENTS
) $${srcdiroption} \
1115 --with-target-subdir
="$(TARGET_SUBDIR)"; \
1117 $(SHELL
) $$s/configure \
1118 $(CONFIG_ARGUMENTS
) $${srcdiroption} \
1119 --with-target-subdir
="$(TARGET_SUBDIR)"; \
1128 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
1129 # To build a target all-X means to cd to X and make all.
1130 .PHONY
: $(ALL_TARGET_MODULES
)
1131 $(ALL_TARGET_MODULES
):
1132 @
dir=`echo $@ | sed -e 's/all-target-//'`; \
1133 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/Makefile
] ; then \
1134 r
=`pwd`; export r
; \
1135 s
=`cd $(srcdir); pwd`; export s
; \
1137 (cd
$(TARGET_SUBDIR
)/$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) all); \
1142 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
1143 # To build a target install-X means to cd to X and make install.
1144 .PHONY
: $(CHECK_TARGET_MODULES
)
1145 $(CHECK_TARGET_MODULES
):
1146 @
dir=`echo $@ | sed -e 's/check-target-//'`; \
1147 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/Makefile
] ; then \
1148 r
=`pwd`; export r
; \
1149 s
=`cd $(srcdir); pwd`; export s
; \
1151 (cd
$(TARGET_SUBDIR
)/$${dir};$(MAKE
) $(TARGET_FLAGS_TO_PASS
) check);\
1156 # This rule is used to install the modules which use
1157 # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
1159 .PHONY
: $(INSTALL_TARGET_MODULES
)
1160 $(INSTALL_TARGET_MODULES
): install-dirs
1161 @
dir=`echo $@ | sed -e 's/install-target-//'`; \
1162 if
[ -f
$(TARGET_SUBDIR
)/$${dir}/Makefile
] ; then \
1163 r
=`pwd`; export r
; \
1164 s
=`cd $(srcdir); pwd`; export s
; \
1166 (cd
$(TARGET_SUBDIR
)/$${dir}; \
1167 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) install); \
1172 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
1173 # To build a target all-X means to cd to X and make all.
1174 .PHONY
: $(ALL_X11_MODULES
)
1176 @
dir=`echo $@ | sed -e 's/all-//'`; \
1177 if
[ -f .
/$${dir}/Makefile
] ; then \
1178 r
=`pwd`; export r
; \
1179 s
=`cd $(srcdir); pwd`; export s
; \
1182 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) all); \
1187 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
1188 # To build a target check-X means to cd to X and make all.
1189 .PHONY
: $(CHECK_X11_MODULES
)
1190 $(CHECK_X11_MODULES
):
1191 @
dir=`echo $@ | sed -e 's/check-//'`; \
1192 if
[ -f .
/$${dir}/Makefile
] ; then \
1193 r
=`pwd`; export r
; \
1194 s
=`cd $(srcdir); pwd`; export s
; \
1197 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) check); \
1202 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
1203 # To build a target install-X means to cd to X and make install.
1204 .PHONY
: $(INSTALL_X11_MODULES
)
1205 $(INSTALL_X11_MODULES
):
1206 @
dir=`echo $@ | sed -e 's/install-//'`; \
1207 if
[ -f .
/$${dir}/Makefile
] ; then \
1208 r
=`pwd`; export r
; \
1209 s
=`cd $(srcdir); pwd`; export s
; \
1212 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) install); \
1217 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
1220 @if
[ -f .
/gcc
/Makefile
] ; then \
1221 r
=`pwd`; export r
; \
1222 s
=`cd $(srcdir); pwd`; export s
; \
1224 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) all); \
1229 .PHONY
: all-bootstrap
1231 @if
[ -f .
/gcc
/Makefile
] ; then \
1232 r
=`pwd`; export r
; \
1233 s
=`cd $(srcdir); pwd`; export s
; \
1235 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) bootstrap
); \
1242 @if
[ -f .
/gcc
/Makefile
] ; then \
1243 r
=`pwd`; export r
; \
1244 s
=`cd $(srcdir); pwd`; export s
; \
1246 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) check); \
1253 @if
[ -f .
/gcc
/Makefile
] ; then \
1254 r
=`pwd`; export r
; \
1255 s
=`cd $(srcdir); pwd`; export s
; \
1257 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
1263 # EXPERIMENTAL STUFF
1264 # This rule is used to install the modules which use FLAGS_TO_PASS.
1265 # To build a target install-X means to cd to X and make install.
1266 .PHONY
: install-dosrel
1267 install-dosrel
: install-dirs
info
1268 @
dir=`echo $@ | sed -e 's/install-//'`; \
1269 if
[ -f .
/$${dir}/Makefile
] ; then \
1270 r
=`pwd`; export r
; \
1271 s
=`cd $(srcdir); pwd`; export s
; \
1273 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
1278 install-dosrel-fake
:
1281 # This is a list of inter-dependencies among modules.
1283 all-autoconf
: all-m4
1286 all-binutils
: all-libiberty all-opcodes all-bfd all-flex all-byacc
1289 all-dejagnu
: all-tcl all-expect all-tk
1290 all-diff
: all-libiberty
1292 all-emacs19
: all-byacc
1294 configure-target-examples
: $(ALL_GCC
)
1295 all-target-examples
: configure-target-examples
1296 all-expect
: all-tcl all-tk
1297 all-fileutils
: all-libiberty
1299 all-flex
: all-libiberty all-byacc
1300 all-gas
: all-libiberty all-opcodes all-bfd
1304 all-gcc
: all-libiberty all-byacc all-binutils all-gas all-ld
1305 all-bootstrap
: all-libiberty all-byacc all-binutils all-gas all-ld
1306 GDB_TK
= all-tk all-tcl
1307 all-gdb
: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim
$(gdbnlmrequirements
) $(GDB_TK
)
1308 all-gprof
: all-libiberty all-bfd all-opcodes
1309 all-grep
: all-libiberty
1310 all-grez
: all-libiberty all-bfd all-opcodes
1311 all-gui
: all-gdb all-libproc all-target-librx
1313 all-gzip
: all-libiberty
1314 all-hello
: all-libiberty
1316 all-inet
: all-tcl all-send-pr all-perl
1317 all-ispell
: all-emacs19
1318 all-ld
: all-libiberty all-bfd all-opcodes all-byacc all-flex
1319 configure-target-libg
++: $(ALL_GCC
) configure-target-librx
1320 all-target-libg
++: configure-target-libg
++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc
++
1321 configure-target-libgloss
: $(ALL_GCC
)
1322 all-target-libgloss
: configure-target-libgloss configure-target-newlib
1323 configure-target-libio
: $(ALL_GCC
)
1324 all-target-libio
: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
1326 configure-target-librx
: $(ALL_GCC
) configure-target-newlib
1327 all-target-librx
: configure-target-librx
1328 configure-target-libstdc
++: $(ALL_GCC
)
1329 all-target-libstdc
++: configure-target-libstdc
++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
1330 all-m4
: all-libiberty
1331 all-make
: all-libiberty
1333 configure-target-newlib
: $(ALL_GCC
)
1334 all-target-newlib
: configure-target-newlib all-binutils all-gas all-gcc
1335 all-opcodes
: all-bfd all-libiberty
1336 all-patch
: all-libiberty
1338 all-prms
: all-libiberty
1341 all-recode
: all-libiberty
1342 all-sed
: all-libiberty
1343 all-send-pr
: all-prms
1345 all-sim
: all-libiberty all-bfd all-opcodes
1346 all-tar
: all-libiberty
1348 all-tclX
: all-tcl all-tk
1350 all-texinfo
: all-libiberty
1352 all-tgas
: all-libiberty all-bfd all-opcodes
1355 all-target-winsup
: all-target-newlib all-target-libiberty configure-target-winsup
1356 configure-target-winsup
: configure-target-newlib
1357 all-uudecode
: all-libiberty
1358 configure-target-libiberty
: $(ALL_GCC
)
1359 all-target-libiberty
: configure-target-libiberty all-gcc all-ld all-target-newlib
1360 all-target
: $(ALL_TARGET_MODULES
)
1361 install-target
: $(INSTALL_TARGET_MODULES
)
1363 ### other supporting targets
1368 .PHONY
: install-dirs
1370 @for i in
$(MAKEDIRS
) ; do \
1371 echo Making
$$i...
; \
1372 parent
=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
1373 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
; \
1374 if
[ ! -d
$$i ] ; then \
1375 if mkdir
$$i ; then \
1386 dir.
info: do-install-info
1387 if
[ -f
$(srcdir)/texinfo
/gen-info-dir
] ; then \
1388 $(srcdir)/texinfo
/gen-info-dir
$(infodir) $(srcdir)/texinfo
/dir.info-template
> dir.
info.new
; \
1389 mv
-f
dir.
info.new
dir.
info ; \
1394 @echo
"Building a full distribution of this tree isn't done"
1395 @echo
"via 'make dist'. Check out the etc/ subdirectory"
1399 # Right now this just builds TAGS in each subdirectory. emacs19 has the
1400 # ability to use several tags files at once, so there is probably no need
1401 # to combine them into one big TAGS file (like CVS 1.3 does). We could
1402 # (if we felt like it) have this Makefile write a piece of elisp which
1403 # the user could load to tell emacs19 where all the TAGS files we just
1407 # with the gnu make, this is done automatically.
1409 Makefile
: Makefile.in configure.in
$(host_makefile_frag
) $(target_makefile_frag
)
1410 $(SHELL
) .
/config.status
1413 # Support for building net releases
1415 # Files in devo used in any net release.
1416 # ChangeLog omitted because it may refer to files which are not in this
1417 # distribution (perhaps it would be better to include it anyway).
1418 DEVO_SUPPORT
= README Makefile.in configure configure.in \
1419 config.guess config.sub config move-if-change \
1420 mpw-README mpw-build.in mpw-config.in mpw-configure \
1421 COPYING COPYING.LIB
install.sh config-ml.in symlink-tree
1423 # Files in devo/etc used in any net release.
1424 # ChangeLog omitted because it may refer to files which are not in this
1425 # distribution (perhaps it would be better to include it anyway).
1426 ETC_SUPPORT
= Makefile.in cfg-paper.texi configure configure.in configure.man \
1427 configure.texi standards.texi make-stds.texi \
1428 configure.
info* standards.
info* cfg-paper.
info*
1430 # When you use `make setup-dirs' or `make taz' you should always redefine
1432 SUPPORT_FILES
= list-of-support-files-for-tool-in-question
1433 # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
1434 DISTBISONFILES
= binutils
/Makefile.in gas
/Makefile.in gdb
/Makefile.in
1438 taz
: $(DEVO_SUPPORT
) $(SUPPORT_FILES
) \
1439 texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1440 # Make sure "diststuff" files get built properly.
1441 for f in
$(DISTBISONFILES
) ; do \
1442 if
[ -r
$$f ]; then \
1443 sed
'/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp
; \
1447 # Take out texinfo from a few places; make simple BISON=bison line.
1448 sed
-e
'/^all\.normal: /s/\all-texinfo //' \
1449 -e
'/^ install-texinfo /d' \
1450 -e
'/^BISON = /,/^$$/d' \
1451 -e
'/^# BISON:/s/.*/BISON = bison -y/' \
1453 mv
-f tmp Makefile.in
1455 $(start-sanitize-Sanitize
)
1456 @if
[ -f .Sanitize
] ; then echo
"RUN Sanitize FIRST!" ; false
; fi
;
1457 $(end-sanitize-Sanitize
)
1459 [ -z
"$(CONFIGURE_TARGET_MODULES)" ] \
1460 ||
$(MAKE
) $(CONFIGURE_TARGET_MODULES
) ALL_GCC
="" \
1461 CC_FOR_TARGET
="$(CC)" CXX_FOR_TARGET
="$(CXX)"
1462 # Make links, and run "make diststuff" or "make info" when needed.
1463 rm -rf proto-toplev
; mkdir proto-toplev
1464 set
-e
; dirs
="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1465 for d in
$$dirs ; do \
1466 if
[ -d
$$d ]; then \
1467 if
[ ! -f
$$d/Makefile
] ; then true
; \
1468 elif grep
'^diststuff:' $$d/Makefile
>/dev
/null
; then \
1469 (cd
$$d ; $(MAKE
) diststuff
) || exit
1 ; \
1470 elif grep
'^info:' $$d/Makefile
>/dev
/null
; then \
1471 (cd
$$d ; $(MAKE
) info ) || exit
1 ; \
1473 if
[ -d
$$d/proto-
$$d.
dir ]; then \
1474 ln
-s ..
/$$d/proto-
$$d.
dir proto-toplev
/$$d ; \
1476 ln
-s ..
/$$d proto-toplev
/$$d ; \
1478 else ln
-s ..
/$$d proto-toplev
/$$d ; fi
; \
1480 cd etc
; $(MAKE
) info
1483 mkdir proto-toplev
/etc
1484 (cd proto-toplev
/etc
; \
1485 for i in
$(ETC_SUPPORT
); do \
1486 ln
-s ..
/..
/etc
/$$i .
; \
1489 # Take out texinfo from configurable dirs
1490 rm proto-toplev
/configure.in
1491 sed
-e
'/^host_tools=/s/texinfo //' \
1492 <configure.in
>proto-toplev
/configure.in
1494 mkdir proto-toplev
/texinfo
1495 ln
-s ..
/..
/texinfo
/texinfo.
tex proto-toplev
/texinfo
/
1496 ln
-s ..
/..
/texinfo
/gpl.texinfo proto-toplev
/texinfo
/
1497 ln
-s ..
/..
/texinfo
/lgpl.texinfo proto-toplev
/texinfo
/
1498 if
test -r texinfo
/util
/tex3patch
; then \
1499 mkdir proto-toplev
/texinfo
/util
&& \
1500 ln
-s ..
/..
/..
/texinfo
/util
/tex3patch proto-toplev
/texinfo
/util
; \
1502 chmod og
=u
`find . -print`
1503 $(MAKE
) -f Makefile.in do-tar-gz TOOL
=$(TOOL
) \
1504 VER
=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`
1507 echo
"==> Making $(TOOL)-$(VER).tar.gz"
1508 -rm -f
$(TOOL
)-$(VER
)
1509 ln
-s proto-toplev
$(TOOL
)-$(VER
)
1510 tar cfh
$(TOOL
)-$(VER
).
tar $(TOOL
)-$(VER
)
1511 $(GZIPPROG
) -v
-9 $(TOOL
)-$(VER
).
tar
1513 TEXINFO_SUPPORT
= texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1514 DIST_SUPPORT
= $(DEVO_SUPPORT
) $(TEXINFO_SUPPORT
)
1517 GAS_SUPPORT_DIRS
= bfd
include libiberty opcodes make-all.com setup.com
1518 gas.
tar.gz
: $(DIST_SUPPORT
) $(GAS_SUPPORT_DIRS
) gas
1519 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1520 SUPPORT_FILES
="$(GAS_SUPPORT_DIRS)"
1522 # The FSF "binutils" release includes gprof and ld.
1523 .PHONY
: binutils.
tar.gz
1524 BINUTILS_SUPPORT_DIRS
= bfd gas
include libiberty opcodes
ld gprof make-all.com setup.com
1525 binutils.
tar.gz
: $(DIST_SUPPORT
) $(BINUTILS_SUPPORT_DIRS
) binutils
1526 $(MAKE
) -f Makefile.in taz TOOL
=binutils \
1527 SUPPORT_FILES
="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1529 .PHONY
: gas
+binutils.
tar.gz
1530 GASB_SUPPORT_DIRS
= $(GAS_SUPPORT_DIRS
) binutils
ld gprof
1531 gas
+binutils.
tar.gz
: $(DIST_SUPPORT
) $(GASB_SUPPORT_DIRS
) gas
1532 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1533 SUPPORT_FILES
="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1535 .PHONY
: libg
++.
tar.gz
1536 LIBGXX_SUPPORT_DIRS
=include libstdc
++ libio librx libiberty
1537 libg
++.
tar.gz
: $(DIST_SUPPORT
) libg
++
1538 $(MAKE
) -f Makefile.in taz TOOL
=libg
++ \
1539 SUPPORT_FILES
="$(LIBGXX_SUPPORT_DIRS)"
1541 GNATS_SUPPORT_DIRS
=include libiberty send-pr
1542 gnats.
tar.gz
: $(DIST_SUPPORT
) $(GNATS_SUPPORT_DIRS
) gnats
1543 $(MAKE
) -f Makefile.in taz TOOL
=gnats \
1544 SUPPORT_FILES
="$(GNATS_SUPPORT_DIRS)"
1547 GDB_SUPPORT_DIRS
= bfd
include libiberty mmalloc opcodes readline sim utils
1548 GDBTK_SUPPORT_DIRS
= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
1549 gdb.
tar.gz
: $(DIST_SUPPORT
) $(GDB_SUPPORT_DIRS
) gdb
1550 $(MAKE
) -f Makefile.in taz TOOL
=gdb \
1551 SUPPORT_FILES
="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
1553 .PHONY
: newlib.
tar.gz
1554 NEWLIB_SUPPORT_DIRS
=libgloss
1555 # taz configures for the sun4 target which won't configure newlib.
1556 # We need newlib configured so that the .info files are made.
1557 # Unfortunately, it is not enough to just configure newlib separately:
1558 # taz will build the .info files but since SUBDIRS won't contain newlib,
1559 # distclean won't be run (leaving Makefile, config.status, and the tmp files
1560 # used in building the .info files, eg: *.def, *.ref).
1561 # The problem isn't solvable however without a lot of extra work because
1562 # target libraries are built in subdir $(target_alias) which gets nuked during
1563 # the make distclean. For now punt on the issue of shipping newlib info files
1564 # with newlib net releases and wait for a day when some native target (sun4?)
1565 # supports newlib (if only minimally).
1566 newlib.
tar.gz
: $(DIST_SUPPORT
) $(NEWLIB_SUPPORT_DIRS
) newlib
1567 $(MAKE
) -f Makefile.in taz TOOL
=newlib \
1568 SUPPORT_FILES
="$(NEWLIB_SUPPORT_DIRS)" \
1569 DEVO_SUPPORT
="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
1574 # start-sanitize-chill
1575 ## This is ugly, but I don't want GNU make to put these variables in
1576 ## the environment. Older makes will see this as a set of targets
1577 ## with no dependencies and no actions.
1578 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET
:
1579 # end-sanitize-chill
1581 # end of Makefile.in