Makefile.in

   1 #
   2 # Makefile for directory with subdirs to build.
   3 #   Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
  18 #
  19
  20 srcdir = .
  21
  22 prefix = /usr/local
  23
  24 exec_prefix = $(prefix)
  25 bindir = $(exec_prefix)/bin
  26 libdir = $(exec_prefix)/lib
  27 tooldir = $(exec_prefix)/$(target)
  28
  29 program_transform_name =
  30
  31 datadir = $(prefix)/lib
  32 mandir = $(prefix)/man
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = $(prefix)/info
  43 includedir = $(prefix)/include
  44 docdir = $(datadir)/doc
  45 GDB_NLM_DEPS =
  46
  47 SHELL = /bin/sh
  48
  49 INSTALL = $${srcroot}/install.sh -c
  50 INSTALL_PROGRAM = $(INSTALL)
  51 INSTALL_DATA = $(INSTALL) -m 644
  52 INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
  53
  54 INSTALL_DOSREL = install-dosrel-fake
  55
  56 AS = as
  57 AR = ar
  58 AR_FLAGS = rc
  59 CC = cc
  60
  61 # Special variables passed down in EXTRA_GCC_FLAGS.  They are defined
  62 # here so that they can be overridden by Makefile fragments.
  63 HOST_CC = $(CC_FOR_BUILD)
  64 HOST_PREFIX =
  65 HOST_PREFIX_1 = loser-
  66
  67 # We don't specify -g -O because many compilers don't support -g -O,
  68 # and/or -O is broken in and of itself.
  69 CFLAGS = -g
  70 LIBCFLAGS = $(CFLAGS)
  71 CFLAGS_FOR_TARGET = $(CFLAGS)
  72 LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
  73 PICFLAG =
  74 PICFLAG_FOR_TARGET =
  75
  76 # start-sanitize-chill
  77 CHILLFLAGS = $(CFLAGS)
  78 CHILL_LIB = -lchill
  79 # end-sanitize-chill
  80 CXX = gcc
  81
  82 # Use -O2 to stress test the compiler.
  83 CXXFLAGS = -g -O2
  84 LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
  85 CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
  86 LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
  87
  88 RANLIB = ranlib
  89 NM = nm
  90 # Not plain GZIP, since gzip looks there for extra command-line options.
  91 GZIPPROG = gzip
  92
  93 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
  94 BISON = `if [ -f $$r/byacc/byacc ] ; \
  95             then echo $$r/byacc/byacc ; \
  96             else echo byacc ; \
  97         fi`
  98
  99 LEX = `if [ -f $$r/flex/flex ] ; \
 100         then echo $$r/flex/flex ; \
 101         else echo flex ; fi`
 102
 103 M4 = `if [ -f $$r/m4/m4 ] ; \
 104         then echo $$r/m4/m4 ; \
 105         else echo m4 ; fi`
 106
 107 MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
 108         then echo $$r/texinfo/makeinfo/makeinfo ; \
 109         else echo makeinfo ; fi`
 110
 111 # This just becomes part of the MAKEINFO definition passed down to
 112 # sub-makes.  It lets flags be given on the command line while still
 113 # using the makeinfo from the object tree.
 114 MAKEINFOFLAGS =
 115
 116 EXPECT = `if [ -f $$r/expect/expect ] ; \
 117         then echo $$r/expect/expect ; \
 118         else echo expect ; fi`
 119
 120 RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \
 121         then echo $${srcroot}/dejagnu/runtest ; \
 122         else echo runtest ; fi`
 123
 124
 125 # compilers to use to create programs which must be run in the build
 126 # environment.
 127 CC_FOR_BUILD = $(CC)
 128 CXX_FOR_BUILD = $(CXX)
 129
 130 SUBDIRS = "this is set via configure, don't edit this"
 131 OTHERS =
 132
 133 # This is set by the configure script to the list of directories which
 134 # should be built using the target tools.
 135 TARGET_CONFIGDIRS = libiberty libgloss newlib libio librx libstdc++ libg++ winsup
 136
 137 # This is set by the configure script to the arguments passed to configure.
 138 CONFIG_ARGUMENTS =
 139
 140 ALL = all.normal
 141 INSTALL_TARGET = install-dirs \
 142         $(INSTALL_MODULES) \
 143         $(INSTALL_TARGET_MODULES) \
 144         $(INSTALL_X11_MODULES) \
 145         install-gcc \
 146         $(INSTALL_DOSREL)
 147
 148
 149 CC_FOR_TARGET = ` \
 150   if [ -f $$r/gcc/Makefile ] ; then \
 151     if [ -f $$r/newlib/Makefile ] ; then \
 152       echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
 153     else \
 154       echo $$r/gcc/xgcc -B$$r/gcc/; \
 155     fi; \
 156   else \
 157     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 158       echo $(CC); \
 159     else \
 160       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 161     fi; \
 162   fi`
 163
 164 # start-sanitize-chill
 165 CHILL_FOR_TARGET = ` \
 166   if [ -f $$r/gcc/Makefile ] ; then \
 167     echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
 168   else \
 169     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 170       echo $(CC); \
 171     else \
 172       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 173     fi; \
 174   fi`
 175
 176 # end-sanitize-chill
 177
 178 CXX_FOR_TARGET = ` \
 179   if [ -f $$r/gcc/Makefile ] ; then \
 180     if [ -f $$r/newlib/Makefile ] ; then \
 181       echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
 182     else \
 183       echo $$r/gcc/xgcc -B$$r/gcc/; \
 184     fi; \
 185   else \
 186     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 187       echo $(CXX); \
 188     else \
 189       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 190     fi; \
 191   fi`
 192
 193 AS_FOR_TARGET = ` \
 194   if [ -f $$r/gas/as.new ] ; then \
 195     echo $$r/gas/as.new ; \
 196   else \
 197     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 198       echo $(AS); \
 199     else \
 200        t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
 201     fi; \
 202   fi`
 203
 204 LD_FOR_TARGET = ` \
 205   if [ -f $$r/ld/ld.new ] ; then \
 206     echo $$r/ld/ld.new ; \
 207   else \
 208     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 209       echo $(LD); \
 210     else \
 211        t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
 212     fi; \
 213   fi`
 214
 215 DLLTOOL_FOR_TARGET = ` \
 216   if [ -f $$r/binutils/dlltool ] ; then \
 217     echo $$r/binutils/dlltool ; \
 218   else \
 219     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 220       echo $(DLLTOOL); \
 221     else \
 222        t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
 223     fi; \
 224   fi`
 225
 226 AR_FOR_TARGET = ` \
 227   if [ -f $$r/binutils/ar ] ; then \
 228     echo $$r/binutils/ar ; \
 229   else \
 230     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 231       echo $(AR); \
 232     else \
 233        t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
 234     fi; \
 235   fi`
 236
 237 RANLIB_FOR_TARGET = ` \
 238   if [ -f $$r/binutils/ranlib ] ; then \
 239     echo $$r/binutils/ranlib ; \
 240   else \
 241     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 242       echo $(RANLIB); \
 243     else \
 244        t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
 245     fi; \
 246   fi`
 247
 248 NM_FOR_TARGET = ` \
 249   if [ -f $$r/binutils/nm.new ] ; then \
 250     echo $$r/binutils/nm.new ; \
 251   else \
 252     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 253       echo $(NM); \
 254     else \
 255        t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
 256     fi; \
 257   fi`
 258
 259 #### host and target specific makefile fragments come in here.
 260 ###
 261
 262 # Flags to pass down to all sub-makes.
 263 # Please keep these in alphabetical order.
 264 BASE_FLAGS_TO_PASS = \
 265         "AR_FLAGS=$(AR_FLAGS)" \
 266         "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
 267         "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
 268         "BISON=$(BISON)" \
 269         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 270         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 271         "CFLAGS=$(CFLAGS)" \
 272         "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 273         $(start-sanitize-chill)\
 274         "CHILLFLAGS=$(CHILLFLAGS)" \
 275         "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
 276         "CHILL_LIB=$(CHILL_LIB)" \
 277         $(end-sanitize-chill)\
 278         "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
 279         "CXXFLAGS=$(CXXFLAGS)" \
 280         "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
 281         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 282         "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
 283         "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
 284         "INSTALL=$(INSTALL)" \
 285         "INSTALL_DATA=$(INSTALL_DATA)" \
 286         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 287         "INSTALL_XFORM=$(INSTALL_XFORM)" \
 288         "LDFLAGS=$(LDFLAGS)" \
 289         "LEX=$(LEX)" \
 290         "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
 291         "LIBCFLAGS=$(LIBCFLAGS)" \
 292         "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 293         "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
 294         "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
 295         "M4=$(M4)" \
 296         "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 297         "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
 298         "PICFLAG=$(PICFLAG)" \
 299         "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 300         "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
 301         "SHELL=$(SHELL)" \
 302         "EXPECT=$(EXPECT)" \
 303         "RUNTEST=$(RUNTEST)" \
 304         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 305         "YACC=$(BISON)" \
 306         "exec_prefix=$(exec_prefix)" \
 307         "prefix=$(prefix)" \
 308         "tooldir=$(tooldir)"
 309
 310 # Flags to pass down to most sub-makes, in which we're building with
 311 # the host environment.
 312 # If any variables are added here, they must be added to do-*, below.
 313 EXTRA_HOST_FLAGS = \
 314         'AR=$(AR)' \
 315         'AS=$(AS)' \
 316         'CC=$(CC)' \
 317         'CXX=$(CXX)' \
 318         'NM=$(NM)' \
 319         'RANLIB=$(RANLIB)'
 320
 321 FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
 322
 323 # Flags that are concerned with the location of the X11 include files
 324 # and library files
 325 #
 326 # NOTE: until the top-level is getting the values via autoconf, it only
 327 # causes problems to have this top-level Makefile overriding the autoconf-set
 328 # values in child directories.  Only variables that don't conflict with
 329 # autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
 330 #
 331 X11_FLAGS_TO_PASS = \
 332         'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
 333         'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
 334
 335 # Flags to pass down to makes which are built with the target environment.
 336 # The double $ decreases the length of the command line; the variables
 337 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
 338 # If any variables are added here, they must be added to do-*, below.
 339 EXTRA_TARGET_FLAGS = \
 340         'AR=$$(AR_FOR_TARGET)' \
 341         'AS=$$(AS_FOR_TARGET)' \
 342         'CC=$$(CC_FOR_TARGET)' \
 343         'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
 344         'CXX=$$(CXX_FOR_TARGET)' \
 345         'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
 346         'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
 347         'LD=$$(LD_FOR_TARGET)' \
 348         'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
 349         'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
 350         'NM=$$(NM_FOR_TARGET)' \
 351         'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
 352         'RANLIB=$$(RANLIB_FOR_TARGET)'
 353
 354 TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
 355
 356 # Flags to pass down to gcc.  gcc builds a library, libgcc.a, so it
 357 # unfortunately needs the native compiler and the target ar and
 358 # ranlib.
 359 # If any variables are added here, they must be added to do-*, below.
 360 # The HOST_* variables are a special case, which are used for the gcc
 361 # cross-building scheme.
 362 EXTRA_GCC_FLAGS = \
 363         'AR=$$(AR_FOR_TARGET)' \
 364         'AS=$(AS)' \
 365         'CC=$(CC)' \
 366         'CXX=$(CXX)' \
 367         'HOST_CC=$(CC_FOR_BUILD)' \
 368         'HOST_PREFIX=$(HOST_PREFIX)' \
 369         'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
 370         'NM=$(NM)' \
 371         'RANLIB=$$(RANLIB_FOR_TARGET)'
 372
 373 GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
 374
 375 # This is a list of the targets for all of the modules which are compiled
 376 # using $(FLAGS_TO_PASS).
 377 ALL_MODULES = \
 378         all-autoconf \
 379         all-bfd \
 380         all-binutils \
 381         all-byacc \
 382         all-cvs \
 383         all-dejagnu \
 384         all-diff \
 385         all-dosutils \
 386         all-etc \
 387         all-fileutils \
 388         all-find \
 389         all-flex \
 390         all-gas \
 391         all-gawk \
 392         all-gprof \
 393         all-grep \
 394         all-gzip \
 395         all-hello \
 396         all-indent \
 397         all-ispell \
 398         all-ld \
 399         all-libiberty \
 400         all-m4 \
 401         all-make \
 402         all-mmalloc \
 403         all-opcodes \
 404         all-patch \
 405         all-prms \
 406         all-rcs \
 407         all-readline \
 408         all-release \
 409         all-recode \
 410         all-sed \
 411         all-send-pr \
 412         all-shellutils \
 413         all-sim \
 414         all-tar \
 415         all-tcl \
 416         all-texinfo \
 417         all-textutils \
 418         all-tgas \
 419         all-time \
 420         all-uudecode \
 421         all-wdiff
 422
 423 # This is a list of the check targets for all of the modules which are
 424 # compiled using $(FLAGS_TO_PASS).
 425 # This is a list of the check targets for all of the modules which are
 426 # compiled using $(FLAGS_TO_PASS).
 427 #
 428 # The list is in two parts.  The first lists those tools which
 429 # are tested as part of the host's native tool-chain, and not
 430 # tested in a cross configuration.
 431 NATIVE_CHECK_MODULES = \
 432         check-byacc \
 433         check-flex
 434
 435 CROSS_CHECK_MODULES = \
 436         check-autoconf \
 437         check-bfd \
 438         check-binutils \
 439         check-cvs \
 440         check-dejagnu \
 441         check-diff \
 442         check-etc \
 443         check-fileutils \
 444         check-find \
 445         check-gas \
 446         check-gawk \
 447         check-gprof \
 448         check-grep \
 449         check-gzip \
 450         check-hello \
 451         check-indent \
 452         check-ispell \
 453         check-ld \
 454         check-libiberty \
 455         check-m4 \
 456         check-make \
 457         check-mmcheckoc \
 458         check-opcodes \
 459         check-patch \
 460         check-prms \
 461         check-rcs \
 462         check-readline \
 463         check-recode \
 464         check-sed \
 465         check-send-pr \
 466         check-shellutils \
 467         check-sim \
 468         check-tar \
 469         check-tcl \
 470         check-texinfo \
 471         check-textutils \
 472         check-tgas \
 473         check-time \
 474         check-uudecode \
 475         check-wdiff
 476
 477 CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 478
 479 # This is a list of the install targets for all of the modules which are
 480 # compiled using $(FLAGS_TO_PASS).
 481 INSTALL_MODULES = \
 482         install-autoconf \
 483         install-bfd \
 484         install-binutils \
 485         install-byacc \
 486         install-cvs \
 487         install-dejagnu \
 488         install-diff \
 489         install-dosutils \
 490         install-etc \
 491         install-fileutils \
 492         install-find \
 493         install-flex \
 494         install-gas \
 495         install-gawk \
 496         install-gprof \
 497         install-grep \
 498         install-gzip \
 499         install-hello \
 500         install-indent \
 501         install-ispell \
 502         install-ld \
 503         install-libiberty \
 504         install-m4 \
 505         install-make \
 506         install-mmalloc \
 507         install-opcodes \
 508         install-patch \
 509         install-prms \
 510         install-rcs \
 511         install-readline \
 512         install-recode \
 513         install-sed \
 514         install-send-pr \
 515         install-shellutils \
 516         install-sim \
 517         install-tar \
 518         install-tcl \
 519         install-texinfo \
 520         install-textutils \
 521         install-tgas \
 522         install-time \
 523         install-uudecode \
 524         install-wdiff
 525
 526 # This is a list of the targets for all of the modules which are compiled
 527 # using $(X11_FLAGS_TO_PASS).
 528 ALL_X11_MODULES = \
 529         all-emacs \
 530         all-emacs19 \
 531         all-gdb \
 532         all-expect \
 533         all-gash \
 534         all-tclX \
 535         all-tk
 536
 537 # This is a list of the check targets for all of the modules which are
 538 # compiled using $(X11_FLAGS_TO_PASS).
 539 CHECK_X11_MODULES = \
 540         check-emacs \
 541         check-gdb \
 542         check-expect \
 543         check-gash \
 544         check-tclX \
 545         check-tk
 546
 547 # This is a list of the install targets for all the modules which are
 548 # compiled using $(X11_FLAGS_TO_PASS).
 549 INSTALL_X11_MODULES = \
 550         install-emacs \
 551         install-emacs19 \
 552         install-gdb \
 553         install-expect \
 554         install-gash \
 555         install-tclX \
 556         install-tk
 557
 558 # This is a list of the targets for all of the modules which are compiled
 559 # using $(TARGET_FLAGS_TO_PASS).
 560 # RENAME these  all-xinberty should be all-target-libiberty
 561 ALL_TARGET_MODULES = \
 562         all-target-libio \
 563         all-target-libstdc++ \
 564         all-target-librx \
 565         all-target-libg++ \
 566         all-target-newlib \
 567         all-target-winsup \
 568         all-target-libgloss \
 569         all-target-libiberty
 570
 571 # This is a list of the configure targets for all of the modules which
 572 # are compiled using the target tools.
 573 CONFIGURE_TARGET_MODULES = \
 574         configure-target-libio \
 575         configure-target-libstdc++ \
 576         configure-target-librx \
 577         configure-target-libg++ \
 578         configure-target-newlib \
 579         configure-target-winsup \
 580         configure-target-libgloss \
 581         configure-target-libiberty
 582
 583 # This is a list of the check targets for all of the modules which are
 584 # compiled using $(TARGET_FLAGS_TO_PASS).
 585 CHECK_TARGET_MODULES = \
 586         check-target-libio \
 587         check-target-libstdc++ \
 588         check-target-libg++ \
 589         check-target-newlib \
 590         check-target-winsup \
 591         check-target-libiberty
 592
 593 # This is a list of the install targets for all of the modules which are
 594 # compiled using $(TARGET_FLAGS_TO_PASS).
 595 CROSS=native # or CROSS=cross
 596 # Target libraries are put under this directory:
 597 TARGET_SUBDIR = . # Changed by configure to $(target_alias) if cross.
 598
 599 INSTALL_TARGET_MODULES = \
 600         install-target-libio \
 601         install-target-libstdc++ \
 602         install-target-libg++ \
 603         install-target-newlib \
 604         install-target-winsup \
 605         install-target-libgloss \
 606         install-target-libiberty
 607
 608 # The first rule in the file had better be this one.  Don't put any above it.
 609 all: all.normal
 610 .PHONY: all
 611
 612 # The target built for a native build.
 613 .PHONY: all.normal
 614 all.normal: \
 615         $(ALL_MODULES) \
 616         $(ALL_TARGET_MODULES) \
 617         $(ALL_X11_MODULES) \
 618         all-gcc
 619
 620 # Do a target for all the subdirectories.  A ``make do-X'' will do a
 621 # ``make X'' in all subdirectories (because, in general, there is a
 622 # dependency (below) of X upon do-X, a ``make X'' will also do this,
 623 # but it may do additional work as well).
 624 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
 625 # because it is so large that it can easily overflow the command line
 626 # length limit on some systems.
 627 DO_X = \
 628         do-clean \
 629         do-distclean \
 630         do-dvi \
 631         do-info \
 632         do-install-info \
 633         do-installcheck \
 634         do-mostlyclean \
 635         do-maintainer-clean \
 636         do-TAGS
 637 .PHONY: $(DO_X)
 638 $(DO_X):
 639         @target=`echo $@ | sed -e 's/^do-//'`; \
 640         r=`pwd`; export r; \
 641         srcroot=`cd $(srcdir); pwd`; export srcroot; \
 642         for i in $(SUBDIRS) -dummy-; do \
 643           if [ -f ./$$i/Makefile ]; then \
 644             case $$i in \
 645             gcc) \
 646               for flag in $(EXTRA_GCC_FLAGS); do \
 647                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 648               done; \
 649               ;; \
 650             *) \
 651               for flag in $(EXTRA_HOST_FLAGS); do \
 652                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 653               done; \
 654               ;; \
 655             esac ; \
 656             export AR AS CC CXX NM RANLIB; \
 657             if (cd ./$$i; \
 658                 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 659                         "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
 660                         "RANLIB=$${RANLIB}" \
 661                         $${target}); \
 662             then true; else exit 1; fi; \
 663           else true; fi; \
 664         done;\
 665         for i in $(TARGET_CONFIGDIRS) -dummy-; do \
 666           if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
 667             for flag in $(EXTRA_TARGET_FLAGS); do \
 668                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 669             done; \
 670             export AR AS CC CXX NM RANLIB; \
 671             if (cd $(TARGET_SUBDIR)/$$i; \
 672                 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 673                         "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
 674                         "RANLIB=$${RANLIB}" \
 675                         $${target}); \
 676             then true; else exit 1; fi; \
 677           else true; fi; \
 678         done
 679
 680 # Here are the targets which correspond to the do-X targets.
 681
 682 .PHONY: info installcheck dvi install-info
 683 .PHONY: clean distclean mostlyclean maintainer-clean realclean
 684 .PHONY: local-clean local-distclean local-maintainer-clean
 685 info: do-info
 686 installcheck: do-installcheck
 687 dvi: do-dvi
 688
 689 install-info: do-install-info dir.info
 690         srcroot=`cd $(srcdir); pwd`; export srcroot; \
 691         if [ -f dir.info ] ; then \
 692           $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
 693         else true ; fi
 694
 695 local-clean:
 696         -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
 697
 698 local-distclean:
 699         -rm -f Makefile config.status
 700
 701 local-maintainer-clean:
 702         @echo "This command is intended for maintainers to use;"
 703         @echo "it deletes files that may require special tools to rebuild."
 704
 705 clean: do-clean local-clean
 706 mostlyclean: do-mostlyclean local-clean
 707 distclean: do-distclean local-clean local-distclean
 708 maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
 709 maintainer-clean: local-distclean
 710 realclean: maintainer-clean
 711
 712 # Check target.
 713
 714 .PHONY: check
 715 check: $(CHECK_MODULES) \
 716         $(CHECK_TARGET_MODULES) \
 717         $(CHECK_X11_MODULES) \
 718         check-gcc
 719
 720 # Installation targets.
 721
 722 .PHONY: install uninstall source-vault binary-vault vault-install
 723 install: $(INSTALL_TARGET)
 724
 725 uninstall:
 726         @echo "the uninstall target is not supported in this tree"
 727
 728 source-vault:
 729         $(MAKE) -f ./release/Build-A-Release \
 730                 host=$(host_alias) source-vault
 731
 732 binary-vault:
 733         $(MAKE) -f ./release/Build-A-Release \
 734                 host=$(host_alias) target=$(target_alias)
 735
 736 vault-install:
 737         @if [ -f ./release/vault-install ] ; then \
 738           ./release/vault-install $(host_alias) $(target_alias) ; \
 739         else \
 740           true ; \
 741         fi
 742
 743 .PHONY: install.all
 744 install.all: install-no-fixedincludes
 745         @if [ -f ./gcc/Makefile ] ; then \
 746                 r=`pwd` ; export r ; \
 747                 (cd ./gcc; \
 748                 $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
 749         else \
 750                 true ; \
 751         fi
 752
 753 # install-no-fixedincludes is used because Cygnus can not distribute
 754 # the fixed header files.
 755 .PHONY: install-no-fixedincludes
 756 install-no-fixedincludes: \
 757         install-dirs \
 758         $(INSTALL_MODULES) \
 759         $(INSTALL_TARGET_MODULES) \
 760         $(INSTALL_X11_MODULES) \
 761         gcc-no-fixedincludes
 762
 763 # Install the gcc headers files, but not the fixed include files,
 764 # which Cygnus is not allowed to distribute.  This rule is very
 765 # dependent on the workings of the gcc Makefile.in.
 766 .PHONY: gcc-no-fixedincludes
 767 gcc-no-fixedincludes:
 768         @if [ -f ./gcc/Makefile ]; then \
 769           rm -rf gcc/tmp-include; \
 770           mv gcc/include gcc/tmp-include 2>/dev/null; \
 771           mkdir gcc/include; \
 772           cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
 773           touch gcc/stmp-fixinc gcc/include/fixed; \
 774           rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
 775           r=`pwd`; export r; \
 776           srcroot=`cd $(srcdir); pwd` ; export srcroot; \
 777           (cd ./gcc; \
 778            $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
 779           rm -rf gcc/include; \
 780           mv gcc/tmp-include gcc/include 2>/dev/null; \
 781         else true; fi
 782
 783 # This rule is used to build the modules which use FLAGS_TO_PASS.  To
 784 # build a target all-X means to cd to X and make all.
 785 #
 786 # all-gui, and all-libproc are handled specially because
 787 # they are still experimental, and if they fail to build, that
 788 # shouldn't stop "make all".
 789 .PHONY: $(ALL_MODULES) all-gui all-libproc
 790 $(ALL_MODULES) all-gui all-libproc:
 791         @dir=`echo $@ | sed -e 's/all-//'`; \
 792         if [ -f ./$${dir}/Makefile ] ; then \
 793           r=`pwd`; export r; \
 794           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 795           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
 796         else \
 797           true; \
 798         fi
 799
 800 # These rules are used to check the modules which use FLAGS_TO_PASS.
 801 # To build a target check-X means to cd to X and make check.  Some
 802 # modules are only tested in a native toolchain.
 803
 804 .PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 805 $(NATIVE_CHECK_MODULES):
 806         @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 807           dir=`echo $@ | sed -e 's/check-//'`; \
 808           if [ -f ./$${dir}/Makefile ] ; then \
 809             r=`pwd`; export r; \
 810             srcroot=`cd $(srcdir); pwd`; export srcroot; \
 811             (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
 812           else \
 813             true; \
 814           fi; \
 815         fi
 816
 817 $(CROSS_CHECK_MODULES):
 818         @dir=`echo $@ | sed -e 's/check-//'`; \
 819         if [ -f ./$${dir}/Makefile ] ; then \
 820           r=`pwd`; export r; \
 821           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 822           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
 823         else \
 824           true; \
 825         fi
 826
 827 # This rule is used to install the modules which use FLAGS_TO_PASS.
 828 # To build a target install-X means to cd to X and make install.
 829 .PHONY: $(INSTALL_MODULES)
 830 $(INSTALL_MODULES): install-dirs
 831         @dir=`echo $@ | sed -e 's/install-//'`; \
 832         if [ -f ./$${dir}/Makefile ] ; then \
 833           r=`pwd`; export r; \
 834           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 835           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
 836         else \
 837           true; \
 838         fi
 839
 840 # This rule is used to configure the modules which are built with the
 841 # target tools.
 842 .PHONY: $(CONFIGURE_TARGET_MODULES)
 843 $(CONFIGURE_TARGET_MODULES):
 844         @dir=`echo $@ | sed -e 's/configure-target-//'`; \
 845         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
 846           true; \
 847         elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
 848           if [ -d $(srcdir)/$${dir} ]; then \
 849             [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
 850             r=`pwd`; export r; \
 851             srcroot=`cd $(srcdir); pwd`; export srcroot; \
 852             AR="$(AR_FOR_TARGET)"; export AR; \
 853             AS="$(AS_FOR_TARGET)"; export AS; \
 854             CC="$(CC_FOR_TARGET)"; export CC; \
 855             CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
 856             CXX="$(CXX_FOR_TARGET)"; export CXX; \
 857             CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
 858             LD="$(LD_FOR_TARGET)"; export LD; \
 859             NM="$(NM_FOR_TARGET)"; export NM; \
 860             RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
 861             cd $(TARGET_SUBDIR)/$${dir}; \
 862             $${srcroot}/configure $(CONFIG_ARGUMENTS) --srcdir=$${srcroot}/$${dir}; \
 863           else \
 864             true; \
 865           fi \
 866         else \
 867           true; \
 868         fi
 869
 870 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
 871 # To build a target all-X means to cd to X and make all.
 872 .PHONY: $(ALL_TARGET_MODULES)
 873 $(ALL_TARGET_MODULES):
 874         @dir=`echo $@ | sed -e 's/all-target-//'`; \
 875         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
 876           r=`pwd`; export r; \
 877           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 878           (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
 879         else \
 880           true; \
 881         fi
 882
 883 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
 884 # To build a target install-X means to cd to X and make install.
 885 .PHONY: $(CHECK_TARGET_MODULES)
 886 $(CHECK_TARGET_MODULES):
 887         @dir=`echo $@ | sed -e 's/check-target//'`; \
 888         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
 889           r=`pwd`; export r; \
 890           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 891           (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
 892         else \
 893           true; \
 894         fi
 895
 896 # This rule is used to install the modules which use
 897 # TARGET_FLAGS_TO_PASS.  To build a target install-X means to cd to X
 898 # and make install.
 899 .PHONY: $(INSTALL_TARGET_MODULES)
 900 $(INSTALL_TARGET_MODULES): install-dirs
 901         @dir=`echo $@ | sed -e 's/install-target-//'`; \
 902         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
 903           r=`pwd`; export r; \
 904           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 905           (cd $(TARGET_SUBDIR)/$${dir}; \
 906             $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
 907         else \
 908           true; \
 909         fi
 910
 911 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
 912 # To build a target all-X means to cd to X and make all.
 913 .PHONY: $(ALL_X11_MODULES)
 914 $(ALL_X11_MODULES):
 915         @dir=`echo $@ | sed -e 's/all-//'`; \
 916         if [ -f ./$${dir}/Makefile ] ; then \
 917           r=`pwd`; export r; \
 918           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 919           (cd $${dir}; \
 920            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
 921         else \
 922           true; \
 923         fi
 924
 925 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
 926 # To build a target check-X means to cd to X and make all.
 927 .PHONY: $(CHECK_X11_MODULES)
 928 $(CHECK_X11_MODULES):
 929         @dir=`echo $@ | sed -e 's/check-//'`; \
 930         if [ -f ./$${dir}/Makefile ] ; then \
 931           r=`pwd`; export r; \
 932           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 933           (cd $${dir}; \
 934            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
 935         else \
 936           true; \
 937         fi
 938
 939 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
 940 # To build a target install-X means to cd to X and make install.
 941 .PHONY: $(INSTALL_X11_MODULES)
 942 $(INSTALL_X11_MODULES):
 943         @dir=`echo $@ | sed -e 's/install-//'`; \
 944         if [ -f ./$${dir}/Makefile ] ; then \
 945           r=`pwd`; export r; \
 946           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 947           (cd $${dir}; \
 948            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
 949         else \
 950           true; \
 951         fi
 952
 953 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
 954 .PHONY: all-gcc
 955 all-gcc:
 956         @if [ -f ./gcc/Makefile ] ; then \
 957           r=`pwd`; export r; \
 958           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 959           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
 960         else \
 961           true; \
 962         fi
 963
 964 .PHONY: check-gcc
 965 check-gcc:
 966         @if [ -f ./gcc/Makefile ] ; then \
 967           r=`pwd`; export r; \
 968           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 969           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
 970         else \
 971           true; \
 972         fi
 973
 974 .PHONY: install-gcc
 975 install-gcc:
 976         @if [ -f ./gcc/Makefile ] ; then \
 977           r=`pwd`; export r; \
 978           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 979           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
 980         else \
 981           true; \
 982         fi
 983
 984
 985 # EXPERIMENTAL STUFF
 986 # This rule is used to install the modules which use FLAGS_TO_PASS.
 987 # To build a target install-X means to cd to X and make install.
 988 .PHONY: install-dosrel
 989 install-dosrel: install-dirs info
 990         @dir=`echo $@ | sed -e 's/install-//'`; \
 991         if [ -f ./$${dir}/Makefile ] ; then \
 992           r=`pwd`; export r; \
 993           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 994           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
 995         else \
 996           true; \
 997         fi
 998
 999 install-dosrel-fake:
1000
1001
1002 # This is a list of inter-dependencies among modules.
1003 all-autoconf: all-m4
1004 all-bfd:
1005 all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
1006 all-byacc:
1007 all-cvs:
1008 all-dejagnu: all-tcl all-expect all-tk
1009 all-diff: all-libiberty
1010 all-emacs:
1011 all-emacs19: all-byacc
1012 all-etc:
1013 all-expect: all-tcl all-tk
1014 all-fileutils: all-libiberty
1015 all-find:
1016 all-flex: all-libiberty all-byacc
1017 all-gas: all-libiberty all-opcodes all-bfd
1018 all-gash: all-tcl
1019 all-gawk:
1020 ALL_GCC = all_gcc
1021 all_gcc: all-libiberty all-byacc all-binutils all-gas all-ld
1022 all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements)
1023 all-gprof: all-libiberty all-bfd
1024 all-grep: all-libiberty
1025 all-gui: all-gdb all-libproc all-target-librx
1026 all-gzip: all-libiberty
1027 all-hello: all-libiberty
1028 all-indent:
1029 all-ispell: all-emacs19
1030 all-ld: all-libiberty all-bfd all-byacc all-flex
1031 configure-target-libg++: $(ALL_GCC)
1032 all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
1033 configure-target-libgloss: $(ALL_GCC)
1034 all-target-libgloss: configure-target-libgloss
1035 configure-target-libio: $(ALL_GCC)
1036 all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
1037 all-libiberty:
1038 configure-target-librx: $(ALL_GCC) configure-target-newlib
1039 all-target-librx: configure-target-librx
1040 configure-target-libstdc++: $(ALL_GCC)
1041 all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
1042 all-m4: all-libiberty
1043 all-make: all-libiberty
1044 all-mmalloc:
1045 configure-target-newlib: $(ALL_GCC)
1046 all-target-newlib: configure-target-newlib all-binutils all-gas all-gcc
1047 all-opcodes: all-bfd
1048 all-patch:
1049 all-prms: all-libiberty
1050 all-rcs:
1051 all-readline:
1052 all-recode: all-libiberty
1053 all-sed: all-libiberty
1054 all-send-pr: all-prms
1055 all-shellutils:
1056 all-sim: all-libiberty all-bfd
1057 all-tar: all-libiberty
1058 all-tcl:
1059 all-tclX: all-tcl all-tk
1060 all-tk: all-tcl
1061 all-texinfo: all-libiberty
1062 all-textutils:
1063 all-tgas: all-libiberty all-bfd
1064 all-time:
1065 all-wdiff:
1066 all-target-winsup: all-target-newlib
1067 configure-target-winsup: configure-target-newlib
1068 all-uudecode: all-libiberty
1069 configure-target-libiberty: $(ALL_GCC)
1070 all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib
1071
1072 ### other supporting targets
1073
1074 MAKEDIRS= \
1075         $(prefix) \
1076         $(exec_prefix) \
1077         $(tooldir)
1078
1079 .PHONY: install-dirs
1080 install-dirs:
1081         @for i in $(MAKEDIRS) ; do \
1082                 echo Making $$i... ; \
1083                 parent=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
1084                 if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
1085                 if [ ! -d $$i ] ; then \
1086                         if mkdir $$i ; then \
1087                                 true ; \
1088                         else \
1089                                 exit 1 ; \
1090                         fi ; \
1091                 else \
1092                         true ; \
1093                 fi ; \
1094         done
1095
1096
1097 dir.info: do-install-info
1098         if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
1099           $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
1100           mv -f dir.info.new dir.info ; \
1101         else true ; \
1102         fi
1103
1104 dist:
1105         @echo "Building a full distribution of this tree isn't done"
1106         @echo "via 'make dist'.  Check out the etc/ subdirectory"
1107
1108 etags tags: TAGS
1109
1110 # Right now this just builds TAGS in each subdirectory.  emacs19 has the
1111 # ability to use several tags files at once, so there is probably no need
1112 # to combine them into one big TAGS file (like CVS 1.3 does).  We could
1113 # (if we felt like it) have this Makefile write a piece of elisp which
1114 # the user could load to tell emacs19 where all the TAGS files we just
1115 # built are.
1116 TAGS: do-TAGS
1117
1118 # with the gnu make, this is done automatically.
1119
1120 Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
1121         $(SHELL) ./config.status
1122
1123 #
1124 # Support for building net releases
1125
1126 # Files in devo used in any net release.
1127 # ChangeLog omitted because it may refer to files which are not in this
1128 # distribution (perhaps it would be better to include it anyway).
1129 DEVO_SUPPORT= README Makefile.in configure configure.in \
1130         config.guess config.sub config move-if-change \
1131         mpw-README mpw-build.in mpw-config.in mpw-configure \
1132         COPYING COPYING.LIB install.sh cfg-ml-com.in cfg-ml-pos.in
1133
1134 # Files in devo/etc used in any net release.
1135 # ChangeLog omitted because it may refer to files which are not in this
1136 # distribution (perhaps it would be better to include it anyway).
1137 ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
1138         configure.texi standards.texi make-stds.texi \
1139         configure.info* standards.info* cfg-paper.info*
1140
1141 # When you use `make setup-dirs' or `make taz' you should always redefine
1142 # this macro.
1143 SUPPORT_FILES = list-of-support-files-for-tool-in-question
1144 # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
1145 DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
1146
1147 .PHONY: taz
1148
1149 taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
1150   texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
1151         # Make sure "diststuff" files get built properly.
1152         for f in $(DISTBISONFILES) ; do \
1153           if [ -r $$f ]; then \
1154             sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \
1155             mv -f tmp $$f ; \
1156           else true; fi ; \
1157         done
1158         # Take out texinfo from a few places; make simple BISON=bison line.
1159         sed -e '/^all\.normal: /s/\all-texinfo //' \
1160             -e '/^      install-texinfo /d' \
1161             -e '/^BISON = /,/^$$/d' \
1162             -e '/^# BISON:/s/.*/BISON = bison -y/' \
1163         <Makefile.in >tmp
1164         mv -f tmp Makefile.in
1165         #
1166         $(start-sanitize-Sanitize)
1167         @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
1168         $(end-sanitize-Sanitize)
1169         ./configure sun4
1170         [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
1171           || $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \
1172             CC_FOR_TARGET="$(CC) CXX_FOR_TARGET="$(CXX)"
1173         # Make links, and run "make diststuff" or "make info" when needed.
1174         rm -rf proto-toplev ; mkdir proto-toplev
1175         set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1176         for d in $$dirs ; do \
1177           if [ -d $$d ]; then \
1178             if [ ! -f $$d/Makefile ] ; then true ; \
1179             elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
1180                 (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
1181             elif grep '^info:' $$d/Makefile >/dev/null ; then \
1182                 (cd $$d ; $(MAKE) info ) || exit 1 ; \
1183             fi ; \
1184             if [ -d $$d/proto-$$d.dir ]; then \
1185               ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
1186             else \
1187               ln -s ../$$d proto-toplev/$$d ; \
1188             fi ; \
1189           else ln -s ../$$d proto-toplev/$$d ; fi ; \
1190         done
1191         cd etc ; $(MAKE) info
1192         $(MAKE) distclean
1193         #
1194         mkdir proto-toplev/etc
1195         (cd proto-toplev/etc; \
1196          for i in $(ETC_SUPPORT); do \
1197                 ln -s ../../etc/$$i . ; \
1198          done)
1199         #
1200         # Take out texinfo from configurable dirs
1201         rm proto-toplev/configure.in
1202         sed -e '/^host_tools=/s/texinfo //' \
1203             <configure.in >proto-toplev/configure.in
1204         #
1205         mkdir proto-toplev/texinfo
1206         ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
1207         ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
1208         ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
1209         ln -s ../../texinfo/tex3patch   proto-toplev/texinfo/
1210         chmod og=u `find . -print`
1211         (VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
1212                 echo "==> Making $(TOOL)-$$VER.tar.gz"; \
1213                 rm -f $(TOOL)-$$VER; ln -s proto-toplev $(TOOL)-$$VER; \
1214                 tar cfh - $(TOOL)-$$VER \
1215                 | $(GZIPPROG) -v -9 >$(TOOL)-$$VER.tar.gz )
1216
1217 TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
1218 DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
1219
1220 .PHONY: gas.tar.gz
1221 GAS_SUPPORT_DIRS= bfd include libiberty opcodes
1222 gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
1223         $(MAKE) -f Makefile.in taz TOOL=gas \
1224                 SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
1225
1226 # The FSF "binutils" release includes gprof and ld.
1227 .PHONY: binutils.tar.gz
1228 BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof
1229 binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
1230         $(MAKE) -f Makefile.in taz TOOL=binutils \
1231                 SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1232
1233 .PHONY: gas+binutils.tar.gz
1234 GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
1235 gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
1236         $(MAKE) -f Makefile.in taz TOOL=gas \
1237                 SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1238
1239 .PHONY: libg++.tar.gz
1240 LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
1241 libg++.tar.gz: $(DIST_SUPPORT) libg++
1242         $(MAKE) -f Makefile.in taz TOOL=libg++ \
1243                 SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
1244
1245 GNATS_SUPPORT_DIRS=include libiberty send-pr
1246 gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
1247         $(MAKE) -f  Makefile.in taz TOOL=gnats \
1248                 SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
1249
1250 .PHONY: gdb.tar.gz
1251 GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils
1252 GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
1253 gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
1254         $(MAKE) -f Makefile.in taz TOOL=gdb \
1255                 SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
1256
1257 .PHONY: newlib.tar.gz
1258 NEWLIB_SUPPORT_DIRS=libgloss
1259 # taz configures for the sun4 target which won't configure newlib.
1260 # We need newlib configured so that the .info files are made.
1261 # Unfortunately, it is not enough to just configure newlib separately:
1262 # taz will build the .info files but since SUBDIRS won't contain newlib,
1263 # distclean won't be run (leaving Makefile, config.status, and the tmp files
1264 # used in building the .info files, eg: *.def, *.ref).
1265 # Compensate here by configuring newlib for a simple (no multilib support)
1266 # cross target (sparc64), building the info files, and doing make distclean
1267 # ourselves.
1268 newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
1269         rootme=`pwd` ; \
1270           cd newlib && ../configure --srcdir $$rootme/newlib \
1271                 --host sun4 --target sparc64-elf
1272         cd newlib ; make info
1273         cd newlib ; make distclean
1274         $(MAKE) -f Makefile.in taz TOOL=newlib \
1275                 SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
1276                 DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
1277
1278 .NOEXPORT:
1279 MAKEOVERRIDES=
1280
1281 # start-sanitize-chill
1282 ## This is ugly, but I don't want GNU make to put these variables in
1283 ## the environment.  Older makes will see this as a set of targets
1284 ## with no dependencies and no actions.
1285 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
1286 # end-sanitize-chill
1287
1288 # end of Makefile.in