Makefile.in

   1 #
   2 # Makefile for directory with subdirs to build.
   3 #   Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  18 #
  19
  20 srcdir = .
  21
  22 prefix = /usr/local
  23
  24 exec_prefix = $(prefix)
  25 bindir = $(exec_prefix)/bin
  26 libdir = $(exec_prefix)/lib
  27 tooldir = $(exec_prefix)/$(target)
  28
  29 program_transform_name =
  30
  31 datadir = $(prefix)/lib
  32 mandir = $(prefix)/man
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = $(prefix)/info
  43 includedir = $(prefix)/include
  44 docdir = $(datadir)/doc
  45 GDB_NLM_DEPS =
  46
  47 SHELL = /bin/sh
  48
  49 INSTALL = $${srcroot}/install.sh -c
  50 INSTALL_PROGRAM = $(INSTALL)
  51 INSTALL_DATA = $(INSTALL) -m 644
  52 INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
  53
  54 INSTALL_DOSREL = install-dosrel-fake
  55
  56 AS = as
  57 AR = ar
  58 AR_FLAGS = rc
  59 CC = cc
  60
  61 # Special variables passed down in EXTRA_GCC_FLAGS.  They are defined
  62 # here so that they can be overridden by Makefile fragments.
  63 HOST_CC = $(CC_FOR_BUILD)
  64 HOST_PREFIX =
  65 HOST_PREFIX_1 = loser-
  66
  67 # We don't specify -g -O because many compilers don't support -g -O,
  68 # and/or -O is broken in and of itself.
  69 CFLAGS = -g
  70 LIBCFLAGS = $(CFLAGS)
  71 CFLAGS_FOR_TARGET = $(CFLAGS)
  72 LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
  73 PICFLAG =
  74 PICFLAG_FOR_TARGET =
  75
  76 # start-sanitize-chill
  77 CHILLFLAGS = $(CFLAGS)
  78 CHILL_LIB = -lchill
  79 # end-sanitize-chill
  80 CXX = gcc
  81
  82 # Use -O2 to stress test the compiler.
  83 CXXFLAGS = -g -O2
  84 LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
  85 CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
  86 LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
  87
  88 RANLIB = ranlib
  89
  90 DLLTOOL = dlltool
  91
  92 NM = nm
  93 # Not plain GZIP, since gzip looks there for extra command-line options.
  94 GZIPPROG = gzip
  95
  96 # These values are substituted by configure.
  97 DEFAULT_YACC = yacc
  98 DEFAULT_LEX = lex
  99
 100 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
 101 BISON = `if [ -f $$r/byacc/byacc ] ; \
 102             then echo $$r/byacc/byacc ; \
 103             else echo ${DEFAULT_YACC} ; \
 104         fi`
 105
 106 LEX = `if [ -f $$r/flex/flex ] ; \
 107         then echo $$r/flex/flex ; \
 108         else echo ${DEFAULT_LEX} ; fi`
 109
 110 M4 = `if [ -f $$r/m4/m4 ] ; \
 111         then echo $$r/m4/m4 ; \
 112         else echo m4 ; fi`
 113
 114 MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
 115         then echo $$r/texinfo/makeinfo/makeinfo ; \
 116         else echo makeinfo ; fi`
 117
 118 # This just becomes part of the MAKEINFO definition passed down to
 119 # sub-makes.  It lets flags be given on the command line while still
 120 # using the makeinfo from the object tree.
 121 MAKEINFOFLAGS =
 122
 123 EXPECT = `if [ -f $$r/expect/expect ] ; \
 124         then echo $$r/expect/expect ; \
 125         else echo expect ; fi`
 126
 127 RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \
 128         then echo $${srcroot}/dejagnu/runtest ; \
 129         else echo runtest ; fi`
 130
 131
 132 # compilers to use to create programs which must be run in the build
 133 # environment.
 134 CC_FOR_BUILD = $(CC)
 135 CXX_FOR_BUILD = $(CXX)
 136
 137 SUBDIRS = "this is set via configure, don't edit this"
 138 OTHERS =
 139
 140 # This is set by the configure script to the list of directories which
 141 # should be built using the target tools.
 142 TARGET_CONFIGDIRS = libiberty libgloss newlib libio librx libstdc++ libg++ winsup
 143
 144 # Target libraries are put under this directory:
 145 TARGET_SUBDIR = . # Changed by configure to $(target_alias) if cross.
 146
 147 # This is set by the configure script to the arguments passed to configure.
 148 CONFIG_ARGUMENTS =
 149
 150 # This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
 151 # was used.
 152 SET_LIB_PATH =
 153
 154 # This is the name of the environment variable used for the path to
 155 # the libraries.  This may be changed by configure.in.
 156 RPATH_ENVVAR = LD_LIBRARY_PATH
 157
 158 # configure.in sets SET_LIB_PATH to this if --enable-shared was used.
 159 REALLY_SET_LIB_PATH = \
 160   $(RPATH_ENVVAR)=$$r/bfd:$$r/opcodes:$$$(RPATH_ENVVAR); \
 161   export $(RPATH_ENVVAR);
 162
 163 ALL = all.normal
 164 INSTALL_TARGET = install-dirs \
 165         $(INSTALL_MODULES) \
 166         $(INSTALL_TARGET_MODULES) \
 167         $(INSTALL_X11_MODULES) \
 168         install-gcc \
 169         $(INSTALL_DOSREL)
 170
 171
 172 CC_FOR_TARGET = ` \
 173   if [ -f $$r/gcc/Makefile ] ; then \
 174     if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
 175       echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
 176     else \
 177       echo $$r/gcc/xgcc -B$$r/gcc/; \
 178     fi; \
 179   else \
 180     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 181       echo $(CC); \
 182     else \
 183       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 184     fi; \
 185   fi`
 186
 187 # start-sanitize-chill
 188 CHILL_FOR_TARGET = ` \
 189   if [ -f $$r/gcc/Makefile ] ; then \
 190     echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
 191   else \
 192     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 193       echo $(CC); \
 194     else \
 195       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 196     fi; \
 197   fi`
 198
 199 # end-sanitize-chill
 200
 201 CXX_FOR_TARGET = ` \
 202   if [ -f $$r/gcc/Makefile ] ; then \
 203     if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
 204       echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
 205     else \
 206       echo $$r/gcc/xgcc -B$$r/gcc/; \
 207     fi; \
 208   else \
 209     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 210       echo $(CXX); \
 211     else \
 212       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 213     fi; \
 214   fi`
 215
 216 AS_FOR_TARGET = ` \
 217   if [ -f $$r/gas/as.new ] ; then \
 218     echo $$r/gas/as.new ; \
 219   else \
 220     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 221       echo $(AS); \
 222     else \
 223        t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
 224     fi; \
 225   fi`
 226
 227 LD_FOR_TARGET = ` \
 228   if [ -f $$r/ld/ld.new ] ; then \
 229     echo $$r/ld/ld.new ; \
 230   else \
 231     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 232       echo $(LD); \
 233     else \
 234        t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
 235     fi; \
 236   fi`
 237
 238 DLLTOOL_FOR_TARGET = ` \
 239   if [ -f $$r/binutils/dlltool ] ; then \
 240     echo $$r/binutils/dlltool ; \
 241   else \
 242     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 243       echo $(DLLTOOL); \
 244     else \
 245        t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
 246     fi; \
 247   fi`
 248
 249 AR_FOR_TARGET = ` \
 250   if [ -f $$r/binutils/ar ] ; then \
 251     echo $$r/binutils/ar ; \
 252   else \
 253     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 254       echo $(AR); \
 255     else \
 256        t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
 257     fi; \
 258   fi`
 259
 260 RANLIB_FOR_TARGET = ` \
 261   if [ -f $$r/binutils/ranlib ] ; then \
 262     echo $$r/binutils/ranlib ; \
 263   else \
 264     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 265       echo $(RANLIB); \
 266     else \
 267        t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
 268     fi; \
 269   fi`
 270
 271 NM_FOR_TARGET = ` \
 272   if [ -f $$r/binutils/nm.new ] ; then \
 273     echo $$r/binutils/nm.new ; \
 274   else \
 275     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 276       echo $(NM); \
 277     else \
 278        t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
 279     fi; \
 280   fi`
 281
 282 #### host and target specific makefile fragments come in here.
 283 ###
 284
 285 # Flags to pass down to all sub-makes.
 286 # Please keep these in alphabetical order.
 287 BASE_FLAGS_TO_PASS = \
 288         "AR_FLAGS=$(AR_FLAGS)" \
 289         "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
 290         "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
 291         "BISON=$(BISON)" \
 292         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 293         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 294         "CFLAGS=$(CFLAGS)" \
 295         "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 296         $(start-sanitize-chill)\
 297         "CHILLFLAGS=$(CHILLFLAGS)" \
 298         "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
 299         "CHILL_LIB=$(CHILL_LIB)" \
 300         $(end-sanitize-chill)\
 301         "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
 302         "CXXFLAGS=$(CXXFLAGS)" \
 303         "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
 304         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 305         "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
 306         "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
 307         "INSTALL=$(INSTALL)" \
 308         "INSTALL_DATA=$(INSTALL_DATA)" \
 309         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 310         "INSTALL_XFORM=$(INSTALL_XFORM)" \
 311         "LDFLAGS=$(LDFLAGS)" \
 312         "LEX=$(LEX)" \
 313         "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
 314         "LIBCFLAGS=$(LIBCFLAGS)" \
 315         "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 316         "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
 317         "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
 318         "M4=$(M4)" \
 319         "MAKE=$(MAKE)" \
 320         "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 321         "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
 322         "PICFLAG=$(PICFLAG)" \
 323         "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 324         "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
 325         "SHELL=$(SHELL)" \
 326         "EXPECT=$(EXPECT)" \
 327         "RUNTEST=$(RUNTEST)" \
 328         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 329         "YACC=$(BISON)" \
 330         "exec_prefix=$(exec_prefix)" \
 331         "prefix=$(prefix)" \
 332         "tooldir=$(tooldir)"
 333
 334 # Flags to pass down to most sub-makes, in which we're building with
 335 # the host environment.
 336 # If any variables are added here, they must be added to do-*, below.
 337 EXTRA_HOST_FLAGS = \
 338         'AR=$(AR)' \
 339         'AS=$(AS)' \
 340         'CC=$(CC)' \
 341         'CXX=$(CXX)' \
 342         'DLLTOOL=$(DLLTOOL)' \
 343         'NM=$(NM)' \
 344         'RANLIB=$(RANLIB)'
 345
 346
 347 FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
 348
 349 # Flags that are concerned with the location of the X11 include files
 350 # and library files
 351 #
 352 # NOTE: until the top-level is getting the values via autoconf, it only
 353 # causes problems to have this top-level Makefile overriding the autoconf-set
 354 # values in child directories.  Only variables that don't conflict with
 355 # autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
 356 #
 357 X11_FLAGS_TO_PASS = \
 358         'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
 359         'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
 360
 361 # Flags to pass down to makes which are built with the target environment.
 362 # The double $ decreases the length of the command line; the variables
 363 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
 364 # If any variables are added here, they must be added to do-*, below.
 365 EXTRA_TARGET_FLAGS = \
 366         'AR=$$(AR_FOR_TARGET)' \
 367         'AS=$$(AS_FOR_TARGET)' \
 368         'CC=$$(CC_FOR_TARGET)' \
 369         'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
 370         'CXX=$$(CXX_FOR_TARGET)' \
 371         'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
 372         'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
 373         'LD=$$(LD_FOR_TARGET)' \
 374         'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
 375         'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
 376         'NM=$$(NM_FOR_TARGET)' \
 377         'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
 378         'RANLIB=$$(RANLIB_FOR_TARGET)'
 379
 380 TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
 381
 382 # Flags to pass down to gcc.  gcc builds a library, libgcc.a, so it
 383 # unfortunately needs the native compiler and the target ar and
 384 # ranlib.
 385 # If any variables are added here, they must be added to do-*, below.
 386 # The HOST_* variables are a special case, which are used for the gcc
 387 # cross-building scheme.
 388 EXTRA_GCC_FLAGS = \
 389         'AR=$$(AR_FOR_TARGET)' \
 390         'AS=$(AS)' \
 391         'CC=$(CC)' \
 392         'CXX=$(CXX)' \
 393         'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
 394         'HOST_CC=$(CC_FOR_BUILD)' \
 395         'HOST_PREFIX=$(HOST_PREFIX)' \
 396         'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
 397         'NM=$(NM)' \
 398         'RANLIB=$$(RANLIB_FOR_TARGET)' \
 399         `if test x"$(LANGUAGES)" != x; then echo "LANGUAGES=$(LANGUAGES)"; fi` \
 400         `if test x"$(STMP_FIXPROTO)" != x; then echo "STMP_FIXPROTO=$(STMP_FIXPROTO)"; fi` \
 401         `if test x"$(LIMITS_H_TEST)" != x; then echo "LIMITS_H_TEST=$(LIMITS_H_TEST)"; fi` \
 402         `if test x"$(LIBGCC1_TEST)" != x; then echo "LIBGCC1_TEST=$(LIBGCC1_TEST)"; fi` \
 403         `if test x"$(LIBGCC2_CFLAGS)" != x; then echo "LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)"; fi` \
 404         `if test x"$(LIBGCC2_INCLUDES)" != x; then echo "LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)"; fi` \
 405         `if test x"$(ENQUIRE)" != x; then echo "ENQUIRE=$(ENQUIRE)"; fi` \
 406         `if test x"$(BOOT_CFLAGS)" != x; then echo "BOOT_CFLAGS=$(BOOT_CFLAGS)"; fi`
 407
 408 GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
 409
 410 # This is a list of the targets for all of the modules which are compiled
 411 # using $(FLAGS_TO_PASS).
 412 ALL_MODULES = \
 413         all-apache \
 414         all-autoconf \
 415         all-bfd \
 416         all-binutils \
 417         all-byacc \
 418         all-cvs \
 419         all-dejagnu \
 420         all-diff \
 421         all-dosutils \
 422         all-etc \
 423         all-fileutils \
 424         all-find \
 425         all-flex \
 426         all-gas \
 427         all-gawk \
 428         all-gprof \
 429         all-grep \
 430         all-grez \
 431         all-gzip \
 432         all-hello \
 433         all-indent \
 434         all-inet \
 435         all-ispell \
 436         all-ld \
 437         all-libiberty \
 438         all-m4 \
 439         all-make \
 440         all-mmalloc \
 441         all-opcodes \
 442         all-patch \
 443         all-perl \
 444         all-prms \
 445         all-rcs \
 446         all-readline \
 447         all-release \
 448         all-recode \
 449         all-sed \
 450         all-send-pr \
 451         all-shellutils \
 452         all-sim \
 453         all-tar \
 454         all-tcl \
 455         all-texinfo \
 456         all-textutils \
 457         all-tgas \
 458         all-time \
 459         all-uudecode \
 460         all-wdiff
 461
 462 # This is a list of the check targets for all of the modules which are
 463 # compiled using $(FLAGS_TO_PASS).
 464 # This is a list of the check targets for all of the modules which are
 465 # compiled using $(FLAGS_TO_PASS).
 466 #
 467 # The list is in two parts.  The first lists those tools which
 468 # are tested as part of the host's native tool-chain, and not
 469 # tested in a cross configuration.
 470 NATIVE_CHECK_MODULES = \
 471         check-byacc \
 472         check-flex
 473
 474 CROSS_CHECK_MODULES = \
 475         check-apache \
 476         check-autoconf \
 477         check-bfd \
 478         check-binutils \
 479         check-cvs \
 480         check-dejagnu \
 481         check-diff \
 482         check-etc \
 483         check-fileutils \
 484         check-find \
 485         check-gas \
 486         check-gawk \
 487         check-gprof \
 488         check-grep \
 489         check-gzip \
 490         check-hello \
 491         check-indent \
 492         check-inet \
 493         check-ispell \
 494         check-ld \
 495         check-libiberty \
 496         check-m4 \
 497         check-make \
 498         check-mmcheckoc \
 499         check-opcodes \
 500         check-patch \
 501         check-perl \
 502         check-prms \
 503         check-rcs \
 504         check-readline \
 505         check-recode \
 506         check-sed \
 507         check-send-pr \
 508         check-shellutils \
 509         check-sim \
 510         check-tar \
 511         check-tcl \
 512         check-texinfo \
 513         check-textutils \
 514         check-tgas \
 515         check-time \
 516         check-uudecode \
 517         check-wdiff
 518
 519 CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 520
 521 # This is a list of the install targets for all of the modules which are
 522 # compiled using $(FLAGS_TO_PASS).
 523 INSTALL_MODULES = \
 524         install-apache \
 525         install-autoconf \
 526         install-bfd \
 527         install-binutils \
 528         install-byacc \
 529         install-cvs \
 530         install-dejagnu \
 531         install-diff \
 532         install-dosutils \
 533         install-etc \
 534         install-fileutils \
 535         install-find \
 536         install-flex \
 537         install-gas \
 538         install-gawk \
 539         install-gprof \
 540         install-grep \
 541         install-grez \
 542         install-gzip \
 543         install-hello \
 544         install-indent \
 545         install-inet \
 546         install-ispell \
 547         install-ld \
 548         install-libiberty \
 549         install-m4 \
 550         install-make \
 551         install-mmalloc \
 552         install-opcodes \
 553         install-patch \
 554         install-perl \
 555         install-prms \
 556         install-rcs \
 557         install-readline \
 558         install-recode \
 559         install-sed \
 560         install-send-pr \
 561         install-shellutils \
 562         install-sim \
 563         install-tar \
 564         install-tcl \
 565         install-texinfo \
 566         install-textutils \
 567         install-tgas \
 568         install-time \
 569         install-uudecode \
 570         install-wdiff
 571
 572 # This is a list of the targets for all of the modules which are compiled
 573 # using $(X11_FLAGS_TO_PASS).
 574 ALL_X11_MODULES = \
 575         all-emacs \
 576         all-emacs19 \
 577         all-gdb \
 578         all-expect \
 579         all-gash \
 580         all-guile \
 581         all-tclX \
 582         all-tk
 583
 584 # This is a list of the check targets for all of the modules which are
 585 # compiled using $(X11_FLAGS_TO_PASS).
 586 CHECK_X11_MODULES = \
 587         check-emacs \
 588         check-gdb \
 589         check-guile \
 590         check-expect \
 591         check-gash \
 592         check-tclX \
 593         check-tk
 594
 595 # This is a list of the install targets for all the modules which are
 596 # compiled using $(X11_FLAGS_TO_PASS).
 597 INSTALL_X11_MODULES = \
 598         install-emacs \
 599         install-emacs19 \
 600         install-gdb \
 601         install-guile \
 602         install-expect \
 603         install-gash \
 604         install-tclX \
 605         install-tk
 606
 607 # This is a list of the targets for all of the modules which are compiled
 608 # using $(TARGET_FLAGS_TO_PASS).
 609 ALL_TARGET_MODULES = \
 610         all-target-libio \
 611         all-target-libstdc++ \
 612         all-target-librx \
 613         all-target-libg++ \
 614         all-target-newlib \
 615         all-target-winsup \
 616         all-target-libgloss \
 617         all-target-libiberty \
 618         all-target-examples
 619
 620 # This is a list of the configure targets for all of the modules which
 621 # are compiled using the target tools.
 622 CONFIGURE_TARGET_MODULES = \
 623         configure-target-libio \
 624         configure-target-libstdc++ \
 625         configure-target-librx \
 626         configure-target-libg++ \
 627         configure-target-newlib \
 628         configure-target-winsup \
 629         configure-target-libgloss \
 630         configure-target-libiberty \
 631         configure-target-examples
 632
 633 # This is a list of the check targets for all of the modules which are
 634 # compiled using $(TARGET_FLAGS_TO_PASS).
 635 CHECK_TARGET_MODULES = \
 636         check-target-libio \
 637         check-target-libstdc++ \
 638         check-target-libg++ \
 639         check-target-newlib \
 640         check-target-winsup \
 641         check-target-libiberty
 642
 643 # This is a list of the install targets for all of the modules which are
 644 # compiled using $(TARGET_FLAGS_TO_PASS).
 645 INSTALL_TARGET_MODULES = \
 646         install-target-libio \
 647         install-target-libstdc++ \
 648         install-target-libg++ \
 649         install-target-newlib \
 650         install-target-winsup \
 651         install-target-libgloss \
 652         install-target-libiberty
 653
 654 # This is a list of the targets for which we can do a clean-{target}.
 655 CLEAN_MODULES = \
 656         clean-apache \
 657         clean-autoconf \
 658         clean-bfd \
 659         clean-binutils \
 660         clean-byacc \
 661         clean-cvs \
 662         clean-dejagnu \
 663         clean-diff \
 664         clean-dosutils \
 665         clean-etc \
 666         clean-fileutils \
 667         clean-find \
 668         clean-flex \
 669         clean-gas \
 670         clean-gawk \
 671         clean-gprof \
 672         clean-grep \
 673         clean-grez \
 674         clean-gzip \
 675         clean-hello \
 676         clean-indent \
 677         clean-inet \
 678         clean-ispell \
 679         clean-ld \
 680         clean-libiberty \
 681         clean-m4 \
 682         clean-make \
 683         clean-mmalloc \
 684         clean-opcodes \
 685         clean-patch \
 686         clean-perl \
 687         clean-prms \
 688         clean-rcs \
 689         clean-readline \
 690         clean-release \
 691         clean-recode \
 692         clean-sed \
 693         clean-send-pr \
 694         clean-shellutils \
 695         clean-sim \
 696         clean-tar \
 697         clean-tcl \
 698         clean-texinfo \
 699         clean-textutils \
 700         clean-tgas \
 701         clean-time \
 702         clean-uudecode \
 703         clean-wdiff
 704
 705 # All of the target modules that can be cleaned
 706 CLEAN_TARGET_MODULES = \
 707         clean-target-libio \
 708         clean-target-libstdc++ \
 709         clean-target-librx \
 710         clean-target-libg++ \
 711         clean-target-newlib \
 712         clean-target-winsup \
 713         clean-target-libgloss \
 714         clean-target-libiberty \
 715         clean-target-examples
 716
 717 # All of the x11 modules that can be cleaned
 718 CLEAN_X11_MODULES = \
 719         clean-emacs \
 720         clean-emacs19 \
 721         clean-gdb \
 722         clean-expect \
 723         clean-gash \
 724         clean-guile \
 725         clean-tclX \
 726         clean-tk
 727
 728 # The first rule in the file had better be this one.  Don't put any above it.
 729 all: all.normal
 730 .PHONY: all
 731
 732 # The target built for a native build.
 733 .PHONY: all.normal
 734 all.normal: \
 735         $(ALL_MODULES) \
 736         $(ALL_TARGET_MODULES) \
 737         $(ALL_X11_MODULES) \
 738         all-gcc
 739
 740 # Do a target for all the subdirectories.  A ``make do-X'' will do a
 741 # ``make X'' in all subdirectories (because, in general, there is a
 742 # dependency (below) of X upon do-X, a ``make X'' will also do this,
 743 # but it may do additional work as well).
 744 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
 745 # because it is so large that it can easily overflow the command line
 746 # length limit on some systems.
 747 DO_X = \
 748         do-clean \
 749         do-distclean \
 750         do-dvi \
 751         do-info \
 752         do-install-info \
 753         do-installcheck \
 754         do-mostlyclean \
 755         do-maintainer-clean \
 756         do-TAGS
 757 .PHONY: $(DO_X)
 758 $(DO_X):
 759         @target=`echo $@ | sed -e 's/^do-//'`; \
 760         r=`pwd`; export r; \
 761         srcroot=`cd $(srcdir); pwd`; export srcroot; \
 762         $(SET_LIB_PATH) \
 763         for i in $(SUBDIRS) -dummy-; do \
 764           if [ -f ./$$i/Makefile ]; then \
 765             case $$i in \
 766             gcc) \
 767               for flag in $(EXTRA_GCC_FLAGS); do \
 768                 eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
 769               done; \
 770               ;; \
 771             *) \
 772               for flag in $(EXTRA_HOST_FLAGS); do \
 773                 eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
 774               done; \
 775               ;; \
 776             esac ; \
 777             export AR AS CC CXX NM RANLIB DLLTOOL; \
 778             if (cd ./$$i; \
 779                 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 780                         "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
 781                         "RANLIB=$${RANLIB}" \
 782                         "DLLTOOL=$${DLLTOOL}" \
 783                         $${target}); \
 784             then true; else exit 1; fi; \
 785           else true; fi; \
 786         done
 787         @target=`echo $@ | sed -e 's/^do-//'`; \
 788         r=`pwd`; export r; \
 789         srcroot=`cd $(srcdir); pwd`; export srcroot; \
 790         $(SET_LIB_PATH) \
 791         for i in $(TARGET_CONFIGDIRS) -dummy-; do \
 792           if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
 793             for flag in $(EXTRA_TARGET_FLAGS); do \
 794                 eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
 795             done; \
 796             export AR AS CC CXX NM RANLIB DLLTOOL; \
 797             if (cd $(TARGET_SUBDIR)/$$i; \
 798                 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 799                         "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
 800                         "RANLIB=$${RANLIB}" \
 801                         "DLLTOOL=$${DLLTOOL}" \
 802                         $${target}); \
 803             then true; else exit 1; fi; \
 804           else true; fi; \
 805         done
 806
 807 # Here are the targets which correspond to the do-X targets.
 808
 809 .PHONY: info installcheck dvi install-info
 810 .PHONY: clean distclean mostlyclean maintainer-clean realclean
 811 .PHONY: local-clean local-distclean local-maintainer-clean
 812 info: do-info
 813 installcheck: do-installcheck
 814 dvi: do-dvi
 815
 816 install-info: do-install-info dir.info
 817         srcroot=`cd $(srcdir); pwd`; export srcroot; \
 818         if [ -f dir.info ] ; then \
 819           $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
 820         else true ; fi
 821
 822 local-clean:
 823         -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
 824
 825 local-distclean:
 826         -rm -f Makefile config.status
 827         -if [ "$(TARGET_SUBDIR)" != "." ]; then \
 828           rm -rf $(TARGET_SUBDIR); \
 829         else true; fi
 830
 831 local-maintainer-clean:
 832         @echo "This command is intended for maintainers to use;"
 833         @echo "it deletes files that may require special tools to rebuild."
 834
 835 clean: do-clean local-clean
 836 mostlyclean: do-mostlyclean local-clean
 837 distclean: do-distclean local-clean local-distclean
 838 maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
 839 maintainer-clean: local-distclean
 840 realclean: maintainer-clean
 841
 842 # This rule is used to clean specific modules.
 843 .PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
 844 $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
 845         @dir=`echo $@ | sed -e 's/clean-//'`; \
 846         if [ -f ./$${dir}/Makefile ] ; then \
 847           r=`pwd`; export r; \
 848           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 849           $(SET_LIB_PATH) \
 850           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
 851         else \
 852           true; \
 853         fi
 854
 855 .PHONY: $(CLEAN_TARGET_MODULES)
 856 $(CLEAN_TARGET_MODULES):
 857         @dir=`echo $@ | sed -e 's/clean-target-//'`; \
 858         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
 859           r=`pwd`; export r; \
 860           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 861           $(SET_LIB_PATH) \
 862           (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
 863         else \
 864           true; \
 865         fi
 866
 867 clean-target: $(CLEAN_TARGET_MODULES)
 868
 869 # Check target.
 870
 871 .PHONY: check
 872 check: $(CHECK_MODULES) \
 873         $(CHECK_TARGET_MODULES) \
 874         $(CHECK_X11_MODULES) \
 875         check-gcc
 876
 877 # Installation targets.
 878
 879 .PHONY: install uninstall source-vault binary-vault vault-install
 880 install: $(INSTALL_TARGET)
 881
 882 uninstall:
 883         @echo "the uninstall target is not supported in this tree"
 884
 885 source-vault:
 886         $(MAKE) -f ./release/Build-A-Release \
 887                 host=$(host_alias) source-vault
 888
 889 binary-vault:
 890         $(MAKE) -f ./release/Build-A-Release \
 891                 host=$(host_alias) target=$(target_alias)
 892
 893 vault-install:
 894         @if [ -f ./release/vault-install ] ; then \
 895           ./release/vault-install $(host_alias) $(target_alias) ; \
 896         else \
 897           true ; \
 898         fi
 899
 900 .PHONY: install.all
 901 install.all: install-no-fixedincludes
 902         @if [ -f ./gcc/Makefile ] ; then \
 903                 r=`pwd` ; export r ; \
 904                 $(SET_LIB_PATH) \
 905                 (cd ./gcc; \
 906                 $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
 907         else \
 908                 true ; \
 909         fi
 910
 911 # inet-install is used because the I*Net wants DejaGNU installed but
 912 # not built.
 913 inet-install:
 914         $(MAKE) INSTALL_MODULES=`echo $(INSTALL_MODULES) | sed -e 's/install-dejagnu//'` install
 915
 916 # install-no-fixedincludes is used because Cygnus can not distribute
 917 # the fixed header files.
 918 .PHONY: install-no-fixedincludes
 919 install-no-fixedincludes: \
 920         install-dirs \
 921         $(INSTALL_MODULES) \
 922         $(INSTALL_TARGET_MODULES) \
 923         $(INSTALL_X11_MODULES) \
 924         gcc-no-fixedincludes
 925
 926 # Install the gcc headers files, but not the fixed include files,
 927 # which Cygnus is not allowed to distribute.  This rule is very
 928 # dependent on the workings of the gcc Makefile.in.
 929 .PHONY: gcc-no-fixedincludes
 930 gcc-no-fixedincludes:
 931         @if [ -f ./gcc/Makefile ]; then \
 932           rm -rf gcc/tmp-include; \
 933           mv gcc/include gcc/tmp-include 2>/dev/null; \
 934           mkdir gcc/include; \
 935           cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
 936           touch gcc/stmp-fixinc gcc/include/fixed; \
 937           rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
 938           r=`pwd`; export r; \
 939           srcroot=`cd $(srcdir); pwd` ; export srcroot; \
 940           $(SET_LIB_PATH) \
 941           (cd ./gcc; \
 942            $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
 943           rm -rf gcc/include; \
 944           mv gcc/tmp-include gcc/include 2>/dev/null; \
 945         else true; fi
 946
 947 # This rule is used to build the modules which use FLAGS_TO_PASS.  To
 948 # build a target all-X means to cd to X and make all.
 949 #
 950 # all-gui, and all-libproc are handled specially because
 951 # they are still experimental, and if they fail to build, that
 952 # shouldn't stop "make all".
 953 .PHONY: $(ALL_MODULES) all-gui all-libproc
 954 $(ALL_MODULES) all-gui all-libproc:
 955         @dir=`echo $@ | sed -e 's/all-//'`; \
 956         if [ -f ./$${dir}/Makefile ] ; then \
 957           r=`pwd`; export r; \
 958           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 959           $(SET_LIB_PATH) \
 960           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
 961         else \
 962           true; \
 963         fi
 964
 965 # These rules are used to check the modules which use FLAGS_TO_PASS.
 966 # To build a target check-X means to cd to X and make check.  Some
 967 # modules are only tested in a native toolchain.
 968
 969 .PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 970 $(NATIVE_CHECK_MODULES):
 971         @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 972           dir=`echo $@ | sed -e 's/check-//'`; \
 973           if [ -f ./$${dir}/Makefile ] ; then \
 974             r=`pwd`; export r; \
 975             srcroot=`cd $(srcdir); pwd`; export srcroot; \
 976             $(SET_LIB_PATH) \
 977             (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
 978           else \
 979             true; \
 980           fi; \
 981         fi
 982
 983 $(CROSS_CHECK_MODULES):
 984         @dir=`echo $@ | sed -e 's/check-//'`; \
 985         if [ -f ./$${dir}/Makefile ] ; then \
 986           r=`pwd`; export r; \
 987           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 988           $(SET_LIB_PATH) \
 989           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
 990         else \
 991           true; \
 992         fi
 993
 994 # This rule is used to install the modules which use FLAGS_TO_PASS.
 995 # To build a target install-X means to cd to X and make install.
 996 .PHONY: $(INSTALL_MODULES)
 997 $(INSTALL_MODULES): install-dirs
 998         @dir=`echo $@ | sed -e 's/install-//'`; \
 999         if [ -f ./$${dir}/Makefile ] ; then \
1000           r=`pwd`; export r; \
1001           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1002           $(SET_LIB_PATH) \
1003           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
1004         else \
1005           true; \
1006         fi
1007
1008 # This rule is used to configure the modules which are built with the
1009 # target tools.
1010 .PHONY: $(CONFIGURE_TARGET_MODULES)
1011 $(CONFIGURE_TARGET_MODULES):
1012         @dir=`echo $@ | sed -e 's/configure-target-//'`; \
1013         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1014           true; \
1015         elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
1016           if [ -d $(srcdir)/$${dir} ]; then \
1017             [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
1018             r=`pwd`; export r; \
1019             srcroot=`cd $(srcdir); pwd`; export srcroot; \
1020             $(SET_LIB_PATH) \
1021             AR="$(AR_FOR_TARGET)"; export AR; \
1022             AS="$(AS_FOR_TARGET)"; export AS; \
1023             CC="$(CC_FOR_TARGET)"; export CC; \
1024             CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
1025             CXX="$(CXX_FOR_TARGET)"; export CXX; \
1026             CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
1027             DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
1028             LD="$(LD_FOR_TARGET)"; export LD; \
1029             NM="$(NM_FOR_TARGET)"; export NM; \
1030             RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
1031             echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
1032             cd $(TARGET_SUBDIR)/$${dir}; \
1033             case $(srcdir) in \
1034             /*) \
1035               topdir=$(srcdir) ;; \
1036             *) \
1037               case "$(TARGET_SUBDIR)" in \
1038               .) topdir="../$(srcdir)" ;; \
1039               *) topdir="../../$(srcdir)" ;; \
1040               esac ;; \
1041             esac; \
1042             if [ "$(srcdir)" = "." ] ; then \
1043               if [ "$(TARGET_SUBDIR)" != "." ] ; then \
1044                 if $(SHELL) $${srcroot}/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
1045                   if [ -f Makefile ]; then \
1046                     if $(MAKE) distclean; then \
1047                       true; \
1048                     else \
1049                       exit 1; \
1050                     fi; \
1051                   else \
1052                     true; \
1053                   fi; \
1054                 else \
1055                   exit 1; \
1056                 fi; \
1057               else \
1058                 true; \
1059               fi; \
1060               srcdiroption="--srcdir=."; \
1061               libsrcdir="."; \
1062             else \
1063               srcdiroption="--srcdir=$${topdir}/$${dir}"; \
1064               libsrcdir="$${srcroot}/$${dir}"; \
1065             fi; \
1066             if [ -f $${libsrcdir}/configure ] ; then \
1067               $(SHELL) $${libsrcdir}/configure \
1068                 $(CONFIG_ARGUMENTS) $${srcdiroption} \
1069                 --with-target-subdir="$(TARGET_SUBDIR)"; \
1070             else \
1071               $(SHELL) $${srcroot}/configure \
1072                 $(CONFIG_ARGUMENTS) $${srcdiroption} \
1073                 --with-target-subdir="$(TARGET_SUBDIR)"; \
1074             fi; \
1075           else \
1076             true; \
1077           fi; \
1078         else \
1079           true; \
1080         fi
1081
1082 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
1083 # To build a target all-X means to cd to X and make all.
1084 .PHONY: $(ALL_TARGET_MODULES)
1085 $(ALL_TARGET_MODULES):
1086         @dir=`echo $@ | sed -e 's/all-target-//'`; \
1087         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1088           r=`pwd`; export r; \
1089           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1090           $(SET_LIB_PATH) \
1091           (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
1092         else \
1093           true; \
1094         fi
1095
1096 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
1097 # To build a target install-X means to cd to X and make install.
1098 .PHONY: $(CHECK_TARGET_MODULES)
1099 $(CHECK_TARGET_MODULES):
1100         @dir=`echo $@ | sed -e 's/check-target-//'`; \
1101         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1102           r=`pwd`; export r; \
1103           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1104           $(SET_LIB_PATH) \
1105           (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
1106         else \
1107           true; \
1108         fi
1109
1110 # This rule is used to install the modules which use
1111 # TARGET_FLAGS_TO_PASS.  To build a target install-X means to cd to X
1112 # and make install.
1113 .PHONY: $(INSTALL_TARGET_MODULES)
1114 $(INSTALL_TARGET_MODULES): install-dirs
1115         @dir=`echo $@ | sed -e 's/install-target-//'`; \
1116         if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1117           r=`pwd`; export r; \
1118           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1119           $(SET_LIB_PATH) \
1120           (cd $(TARGET_SUBDIR)/$${dir}; \
1121             $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
1122         else \
1123           true; \
1124         fi
1125
1126 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
1127 # To build a target all-X means to cd to X and make all.
1128 .PHONY: $(ALL_X11_MODULES)
1129 $(ALL_X11_MODULES):
1130         @dir=`echo $@ | sed -e 's/all-//'`; \
1131         if [ -f ./$${dir}/Makefile ] ; then \
1132           r=`pwd`; export r; \
1133           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1134           $(SET_LIB_PATH) \
1135           (cd $${dir}; \
1136            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
1137         else \
1138           true; \
1139         fi
1140
1141 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
1142 # To build a target check-X means to cd to X and make all.
1143 .PHONY: $(CHECK_X11_MODULES)
1144 $(CHECK_X11_MODULES):
1145         @dir=`echo $@ | sed -e 's/check-//'`; \
1146         if [ -f ./$${dir}/Makefile ] ; then \
1147           r=`pwd`; export r; \
1148           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1149           $(SET_LIB_PATH) \
1150           (cd $${dir}; \
1151            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
1152         else \
1153           true; \
1154         fi
1155
1156 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
1157 # To build a target install-X means to cd to X and make install.
1158 .PHONY: $(INSTALL_X11_MODULES)
1159 $(INSTALL_X11_MODULES):
1160         @dir=`echo $@ | sed -e 's/install-//'`; \
1161         if [ -f ./$${dir}/Makefile ] ; then \
1162           r=`pwd`; export r; \
1163           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1164           $(SET_LIB_PATH) \
1165           (cd $${dir}; \
1166            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
1167         else \
1168           true; \
1169         fi
1170
1171 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
1172 .PHONY: all-gcc
1173 all-gcc:
1174         @if [ -f ./gcc/Makefile ] ; then \
1175           r=`pwd`; export r; \
1176           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1177           $(SET_LIB_PATH) \
1178           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
1179         else \
1180           true; \
1181         fi
1182
1183 .PHONY: all-bootstrap
1184 all-bootstrap:
1185         @if [ -f ./gcc/Makefile ] ; then \
1186           r=`pwd`; export r; \
1187           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1188           $(SET_LIB_PATH) \
1189           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) bootstrap); \
1190         else \
1191           true; \
1192         fi
1193
1194 .PHONY: check-gcc
1195 check-gcc:
1196         @if [ -f ./gcc/Makefile ] ; then \
1197           r=`pwd`; export r; \
1198           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1199           $(SET_LIB_PATH) \
1200           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
1201         else \
1202           true; \
1203         fi
1204
1205 .PHONY: install-gcc
1206 install-gcc:
1207         @if [ -f ./gcc/Makefile ] ; then \
1208           r=`pwd`; export r; \
1209           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1210           $(SET_LIB_PATH) \
1211           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
1212         else \
1213           true; \
1214         fi
1215
1216
1217 # EXPERIMENTAL STUFF
1218 # This rule is used to install the modules which use FLAGS_TO_PASS.
1219 # To build a target install-X means to cd to X and make install.
1220 .PHONY: install-dosrel
1221 install-dosrel: install-dirs info
1222         @dir=`echo $@ | sed -e 's/install-//'`; \
1223         if [ -f ./$${dir}/Makefile ] ; then \
1224           r=`pwd`; export r; \
1225           srcroot=`cd $(srcdir); pwd`; export srcroot; \
1226           $(SET_LIB_PATH) \
1227           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
1228         else \
1229           true; \
1230         fi
1231
1232 install-dosrel-fake:
1233
1234
1235 # This is a list of inter-dependencies among modules.
1236 all-apache:
1237 all-autoconf: all-m4
1238 all-bfd:
1239 all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
1240 all-byacc:
1241 all-cvs:
1242 all-dejagnu: all-tcl all-expect all-tk
1243 all-diff: all-libiberty
1244 all-emacs:
1245 all-emacs19: all-byacc
1246 all-etc:
1247 configure-target-examples: $(ALL_GCC)
1248 all-target-examples: configure-target-examples
1249 all-expect: all-tcl all-tk
1250 all-fileutils: all-libiberty
1251 all-find:
1252 all-flex: all-libiberty all-byacc
1253 all-gas: all-libiberty all-opcodes all-bfd
1254 all-gash: all-tcl
1255 all-gawk:
1256 ALL_GCC = all-gcc
1257 all-gcc: all-libiberty all-byacc all-binutils all-gas all-ld
1258 all-bootstrap: all-libiberty all-byacc all-binutils all-gas all-ld
1259 GDB_TK = all-tk all-tcl
1260 all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
1261 all-gprof: all-libiberty all-bfd all-opcodes
1262 all-grep: all-libiberty
1263 all-grez: all-libiberty all-bfd all-opcodes
1264 all-gui: all-gdb all-libproc all-target-librx
1265 all-guile:
1266 all-gzip: all-libiberty
1267 all-hello: all-libiberty
1268 all-indent:
1269 all-inet: all-tcl all-send-pr all-perl
1270 all-ispell: all-emacs19
1271 all-ld: all-libiberty all-bfd all-opcodes all-byacc all-flex
1272 configure-target-libg++: $(ALL_GCC) configure-target-librx
1273 all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
1274 configure-target-libgloss: $(ALL_GCC)
1275 all-target-libgloss: configure-target-libgloss configure-target-newlib
1276 configure-target-libio: $(ALL_GCC)
1277 all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
1278 all-libiberty:
1279 configure-target-librx: $(ALL_GCC) configure-target-newlib
1280 all-target-librx: configure-target-librx
1281 configure-target-libstdc++: $(ALL_GCC)
1282 all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
1283 all-m4: all-libiberty
1284 all-make: all-libiberty
1285 all-mmalloc:
1286 configure-target-newlib: $(ALL_GCC)
1287 all-target-newlib: configure-target-newlib all-binutils all-gas all-gcc
1288 all-opcodes: all-bfd all-libiberty
1289 all-patch: all-libiberty
1290 all-perl:
1291 all-prms: all-libiberty
1292 all-rcs:
1293 all-readline:
1294 all-recode: all-libiberty
1295 all-sed: all-libiberty
1296 all-send-pr: all-prms
1297 all-shellutils:
1298 all-sim: all-libiberty all-bfd all-opcodes
1299 all-tar: all-libiberty
1300 all-tcl:
1301 all-tclX: all-tcl all-tk
1302 all-tk: all-tcl
1303 all-texinfo: all-libiberty
1304 all-textutils:
1305 all-tgas: all-libiberty all-bfd all-opcodes
1306 all-time:
1307 all-wdiff:
1308 all-target-winsup: all-target-newlib all-target-libiberty configure-target-winsup
1309 configure-target-winsup: configure-target-newlib
1310 all-uudecode: all-libiberty
1311 configure-target-libiberty: $(ALL_GCC)
1312 all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib
1313 all-target: $(ALL_TARGET_MODULES)
1314 install-target: $(INSTALL_TARGET_MODULES)
1315
1316 ### other supporting targets
1317
1318 MAKEDIRS= \
1319         $(prefix) \
1320         $(exec_prefix) \
1321         $(tooldir)
1322
1323 .PHONY: install-dirs
1324 install-dirs:
1325         @for i in $(MAKEDIRS) ; do \
1326                 echo Making $$i... ; \
1327                 parent=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
1328                 if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
1329                 if [ ! -d $$i ] ; then \
1330                         if mkdir $$i ; then \
1331                                 true ; \
1332                         else \
1333                                 exit 1 ; \
1334                         fi ; \
1335                 else \
1336                         true ; \
1337                 fi ; \
1338         done
1339
1340
1341 dir.info: do-install-info
1342         if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
1343           $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
1344           mv -f dir.info.new dir.info ; \
1345         else true ; \
1346         fi
1347
1348 dist:
1349         @echo "Building a full distribution of this tree isn't done"
1350         @echo "via 'make dist'.  Check out the etc/ subdirectory"
1351
1352 etags tags: TAGS
1353
1354 # Right now this just builds TAGS in each subdirectory.  emacs19 has the
1355 # ability to use several tags files at once, so there is probably no need
1356 # to combine them into one big TAGS file (like CVS 1.3 does).  We could
1357 # (if we felt like it) have this Makefile write a piece of elisp which
1358 # the user could load to tell emacs19 where all the TAGS files we just
1359 # built are.
1360 TAGS: do-TAGS
1361
1362 # with the gnu make, this is done automatically.
1363
1364 Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
1365         $(SHELL) ./config.status
1366
1367 #
1368 # Support for building net releases
1369
1370 # Files in devo used in any net release.
1371 # ChangeLog omitted because it may refer to files which are not in this
1372 # distribution (perhaps it would be better to include it anyway).
1373 DEVO_SUPPORT= README Makefile.in configure configure.in \
1374         config.guess config.sub config move-if-change \
1375         mpw-README mpw-build.in mpw-config.in mpw-configure \
1376         COPYING COPYING.LIB install.sh config-ml.in symlink-tree
1377
1378 # Files in devo/etc used in any net release.
1379 # ChangeLog omitted because it may refer to files which are not in this
1380 # distribution (perhaps it would be better to include it anyway).
1381 ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
1382         configure.texi standards.texi make-stds.texi \
1383         configure.info* standards.info* cfg-paper.info*
1384
1385 # When you use `make setup-dirs' or `make taz' you should always redefine
1386 # this macro.
1387 SUPPORT_FILES = list-of-support-files-for-tool-in-question
1388 # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
1389 DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
1390
1391 .PHONY: taz
1392
1393 taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
1394   texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
1395         # Make sure "diststuff" files get built properly.
1396         for f in $(DISTBISONFILES) ; do \
1397           if [ -r $$f ]; then \
1398             sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \
1399             mv -f tmp $$f ; \
1400           else true; fi ; \
1401         done
1402         # Take out texinfo from a few places; make simple BISON=bison line.
1403         sed -e '/^all\.normal: /s/\all-texinfo //' \
1404             -e '/^      install-texinfo /d' \
1405             -e '/^BISON = /,/^$$/d' \
1406             -e '/^# BISON:/s/.*/BISON = bison -y/' \
1407         <Makefile.in >tmp
1408         mv -f tmp Makefile.in
1409         #
1410         $(start-sanitize-Sanitize)
1411         @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
1412         $(end-sanitize-Sanitize)
1413         ./configure sun4
1414         [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
1415           || $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \
1416             CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
1417         # Make links, and run "make diststuff" or "make info" when needed.
1418         rm -rf proto-toplev ; mkdir proto-toplev
1419         set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1420         for d in $$dirs ; do \
1421           if [ -d $$d ]; then \
1422             if [ ! -f $$d/Makefile ] ; then true ; \
1423             elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
1424                 (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
1425             elif grep '^info:' $$d/Makefile >/dev/null ; then \
1426                 (cd $$d ; $(MAKE) info ) || exit 1 ; \
1427             fi ; \
1428             if [ -d $$d/proto-$$d.dir ]; then \
1429               ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
1430             else \
1431               ln -s ../$$d proto-toplev/$$d ; \
1432             fi ; \
1433           else ln -s ../$$d proto-toplev/$$d ; fi ; \
1434         done
1435         cd etc ; $(MAKE) info
1436         $(MAKE) distclean
1437         #
1438         mkdir proto-toplev/etc
1439         (cd proto-toplev/etc; \
1440          for i in $(ETC_SUPPORT); do \
1441                 ln -s ../../etc/$$i . ; \
1442          done)
1443         #
1444         # Take out texinfo from configurable dirs
1445         rm proto-toplev/configure.in
1446         sed -e '/^host_tools=/s/texinfo //' \
1447             <configure.in >proto-toplev/configure.in
1448         #
1449         mkdir proto-toplev/texinfo
1450         ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
1451         ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
1452         ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
1453         ln -s ../../texinfo/tex3patch   proto-toplev/texinfo/
1454         chmod og=u `find . -print`
1455         (VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
1456                 echo "==> Making $(TOOL)-$$VER.tar.gz"; \
1457                 rm -f $(TOOL)-$$VER; ln -s proto-toplev $(TOOL)-$$VER; \
1458                 tar cfh - $(TOOL)-$$VER \
1459                 | $(GZIPPROG) -v -9 >$(TOOL)-$$VER.tar.gz )
1460
1461 TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
1462 DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
1463
1464 .PHONY: gas.tar.gz
1465 GAS_SUPPORT_DIRS= bfd include libiberty opcodes
1466 gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
1467         $(MAKE) -f Makefile.in taz TOOL=gas \
1468                 SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
1469
1470 # The FSF "binutils" release includes gprof and ld.
1471 .PHONY: binutils.tar.gz
1472 BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof
1473 binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
1474         $(MAKE) -f Makefile.in taz TOOL=binutils \
1475                 SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1476
1477 .PHONY: gas+binutils.tar.gz
1478 GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
1479 gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
1480         $(MAKE) -f Makefile.in taz TOOL=gas \
1481                 SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1482
1483 .PHONY: libg++.tar.gz
1484 LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
1485 libg++.tar.gz: $(DIST_SUPPORT) libg++
1486         $(MAKE) -f Makefile.in taz TOOL=libg++ \
1487                 SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
1488
1489 GNATS_SUPPORT_DIRS=include libiberty send-pr
1490 gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
1491         $(MAKE) -f  Makefile.in taz TOOL=gnats \
1492                 SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
1493
1494 .PHONY: gdb.tar.gz
1495 GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils
1496 GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
1497 gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
1498         $(MAKE) -f Makefile.in taz TOOL=gdb \
1499                 SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
1500
1501 .PHONY: newlib.tar.gz
1502 NEWLIB_SUPPORT_DIRS=libgloss
1503 # taz configures for the sun4 target which won't configure newlib.
1504 # We need newlib configured so that the .info files are made.
1505 # Unfortunately, it is not enough to just configure newlib separately:
1506 # taz will build the .info files but since SUBDIRS won't contain newlib,
1507 # distclean won't be run (leaving Makefile, config.status, and the tmp files
1508 # used in building the .info files, eg: *.def, *.ref).
1509 # The problem isn't solvable however without a lot of extra work because
1510 # target libraries are built in subdir $(target_alias) which gets nuked during
1511 # the make distclean.  For now punt on the issue of shipping newlib info files
1512 # with newlib net releases and wait for a day when some native target (sun4?)
1513 # supports newlib (if only minimally).
1514 newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
1515         $(MAKE) -f Makefile.in taz TOOL=newlib \
1516                 SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
1517                 DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
1518
1519 .NOEXPORT:
1520 MAKEOVERRIDES=
1521
1522 # start-sanitize-chill
1523 ## This is ugly, but I don't want GNU make to put these variables in
1524 ## the environment.  Older makes will see this as a set of targets
1525 ## with no dependencies and no actions.
1526 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
1527 # end-sanitize-chill
1528
1529 # end of Makefile.in