2 # Makefile for directory with subdirs to build.
3 # Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
5 # This file is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
24 exec_prefix = $(prefix)
25 bindir = $(exec_prefix)/bin
26 libdir = $(exec_prefix)/lib
27 tooldir
= $(exec_prefix)/$(target
)
29 program_transform_name
=
31 datadir = $(prefix)/lib
32 mandir = $(prefix)/man
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
42 infodir = $(prefix)/info
43 includedir = $(prefix)/include
44 docdir
= $(datadir)/doc
49 INSTALL
= $${srcroot}/install.sh
-c
50 INSTALL_PROGRAM
= $(INSTALL
)
51 INSTALL_DATA
= $(INSTALL
) -m
644
52 INSTALL_XFORM
= $(INSTALL
) -t
='$(program_transform_name)'
54 INSTALL_DOSREL
= install-dosrel-fake
61 # Special variables passed down in EXTRA_GCC_FLAGS. They are defined
62 # here so that they can be overridden by Makefile fragments.
63 HOST_CC
= $(CC_FOR_BUILD
)
65 HOST_PREFIX_1
= loser-
67 # We don't specify -g -O because many compilers don't support -g -O,
68 # and/or -O is broken in and of itself.
71 CFLAGS_FOR_TARGET
= $(CFLAGS
)
72 LIBCFLAGS_FOR_TARGET
= $(CFLAGS_FOR_TARGET
)
76 # start-sanitize-chill
77 CHILLFLAGS
= $(CFLAGS
)
82 # Use -O2 to stress test the compiler.
84 LIBCXXFLAGS
= $(CXXFLAGS
) -fno-implicit-templates
85 CXXFLAGS_FOR_TARGET
= $(CXXFLAGS
)
86 LIBCXXFLAGS_FOR_TARGET
= $(CXXFLAGS_FOR_TARGET
) -fno-implicit-templates
90 # Not plain GZIP, since gzip looks there for extra command-line options.
93 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
94 BISON
= `if [ -f $$r/byacc/byacc ] ; \
95 then echo $$r/byacc/byacc ; \
99 LEX
= `if [ -f $$r/flex/flex ] ; \
100 then echo $$r/flex/flex ; \
103 M4
= `if [ -f $$r/m4/m4 ] ; \
104 then echo $$r/m4/m4 ; \
107 MAKEINFO
= `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
108 then echo $$r/texinfo/makeinfo/makeinfo ; \
109 else echo makeinfo ; fi`
111 # This just becomes part of the MAKEINFO definition passed down to
112 # sub-makes. It lets flags be given on the command line while still
113 # using the makeinfo from the object tree.
116 EXPECT
= `if [ -f $$r/expect/expect ] ; \
117 then echo $$r/expect/expect ; \
118 else echo expect ; fi`
120 RUNTEST
= `if [ -f $${srcroot}/dejagnu/runtest ] ; \
121 then echo $${srcroot}/dejagnu/runtest ; \
122 else echo runtest ; fi`
125 # libraries that may need to be augmented on a system-by-system basis
128 # compilers to use to create programs which must be run in the build
131 CXX_FOR_BUILD
= $(CXX
)
133 SUBDIRS
= "this is set via configure, don't edit this"
136 # This is set by the configure script to the list of directories which
137 # should be built using the target tools.
138 TARGET_CONFIGDIRS
= xiberty libgloss newlib libio librx libstdc
++ libg
++ winsup
140 # This is set by the configure script to the arguments passed to configure.
144 INSTALL_TARGET
= install-dirs \
146 $(INSTALL_TARGET_MODULES
) \
147 $(INSTALL_X11_MODULES
) \
153 if [ -f $$r/gcc/Makefile ] ; then \
154 if [ -f $$r/newlib/Makefile ] ; then \
155 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
157 echo $$r/gcc/xgcc -B$$r/gcc/; \
160 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
163 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
167 # start-sanitize-chill
168 CHILL_FOR_TARGET
= ` \
169 if [ -f $$r/gcc/Makefile ] ; then \
170 echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
172 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
175 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
182 if [ -f $$r/gcc/Makefile ] ; then \
183 if [ -f $$r/newlib/Makefile ] ; then \
184 echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
186 echo $$r/gcc/xgcc -B$$r/gcc/; \
189 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
192 t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
197 if [ -f $$r/gas/as.new ] ; then \
198 echo $$r/gas/as.new ; \
200 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
203 t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
207 DLLTOOL_FOR_TARGET
= ` \
208 if [ -f $$r/binutils/dlltool ] ; then \
209 echo $$r/binutils/dlltool ; \
211 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
214 t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
219 if [ -f $$r/binutils/ar ] ; then \
220 echo $$r/binutils/ar ; \
222 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
225 t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
229 RANLIB_FOR_TARGET
= ` \
230 if [ -f $$r/binutils/ranlib ] ; then \
231 echo $$r/binutils/ranlib ; \
233 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
236 t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
241 if [ -f $$r/binutils/nm.new ] ; then \
242 echo $$r/binutils/nm.new ; \
244 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
247 t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
251 #### host and target specific makefile fragments come in here.
254 # Flags to pass down to all sub-makes.
255 # Please keep these in alphabetical order.
256 BASE_FLAGS_TO_PASS
= \
257 "AR_FLAGS=$(AR_FLAGS)" \
258 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
259 "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
261 "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
262 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
264 "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
265 $(start-sanitize-chill
)\
266 "CHILLFLAGS=$(CHILLFLAGS)" \
267 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
268 "CHILL_LIB=$(CHILL_LIB)" \
269 $(end-sanitize-chill
)\
270 "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
271 "CXXFLAGS=$(CXXFLAGS)" \
272 "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
273 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
274 "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
275 "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
276 "INSTALL=$(INSTALL)" \
277 "INSTALL_DATA=$(INSTALL_DATA)" \
278 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
279 "INSTALL_XFORM=$(INSTALL_XFORM)" \
280 "LDFLAGS=$(LDFLAGS)" \
282 "LIBCFLAGS=$(LIBCFLAGS)" \
283 "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
284 "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
285 "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
287 "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
288 "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
289 "PICFLAG=$(PICFLAG)" \
290 "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
291 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
294 "RUNTEST=$(RUNTEST)" \
295 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
297 "exec_prefix=$(exec_prefix)" \
301 # Flags to pass down to most sub-makes, in which we're building with
302 # the host environment.
303 # If any variables are added here, they must be added to do-*, below.
312 FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_HOST_FLAGS
)
314 # Flags that are concerned with the location of the X11 include files
316 X11_FLAGS_TO_PASS
= \
317 "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
318 "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
321 # Flags to pass down to makes which are built with the target environment.
322 # The double $ decreases the length of the command line; the variables
323 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
324 # If any variables are added here, they must be added to do-*, below.
325 EXTRA_TARGET_FLAGS
= \
326 'AR=$$(AR_FOR_TARGET)' \
327 'AS=$$(AS_FOR_TARGET)' \
328 'CC=$$(CC_FOR_TARGET)' \
329 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
330 'CXX=$$(CXX_FOR_TARGET)' \
331 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
332 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
333 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
334 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
335 'NM=$$(NM_FOR_TARGET)' \
336 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
337 'RANLIB=$$(RANLIB_FOR_TARGET)'
339 TARGET_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_TARGET_FLAGS
)
341 # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
342 # unfortunately needs the native compiler and the target ar and
344 # If any variables are added here, they must be added to do-*, below.
345 # The HOST_* variables are a special case, which are used for the gcc
346 # cross-building scheme.
348 'AR=$$(AR_FOR_TARGET)' \
352 'HOST_CC=$(CC_FOR_BUILD)' \
353 'HOST_PREFIX=$(HOST_PREFIX)' \
354 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
356 'RANLIB=$$(RANLIB_FOR_TARGET)'
358 GCC_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_GCC_FLAGS
)
360 # This is a list of the targets for all of the modules which are compiled
361 # using $(FLAGS_TO_PASS).
408 # This is a list of the check targets for all of the modules which are
409 # compiled using $(FLAGS_TO_PASS).
410 # This is a list of the check targets for all of the modules which are
411 # compiled using $(FLAGS_TO_PASS).
413 # The list is in two parts. The first lists those tools which
414 # are tested as part of the host's native tool-chain, and not
415 # tested in a cross configuration.
416 NATIVE_CHECK_MODULES
= \
420 CROSS_CHECK_MODULES
= \
462 CHECK_MODULES
=$(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
464 # This is a list of the install targets for all of the modules which are
465 # compiled using $(FLAGS_TO_PASS).
511 # This is a list of the targets for all of the modules which are compiled
512 # using $(X11_FLAGS_TO_PASS).
522 # This is a list of the check targets for all of the modules which are
523 # compiled using $(X11_FLAGS_TO_PASS).
524 CHECK_X11_MODULES
= \
532 # This is a list of the install targets for all the modules which are
533 # compiled using $(X11_FLAGS_TO_PASS).
534 INSTALL_X11_MODULES
= \
543 # This is a list of the targets for all of the modules which are compiled
544 # using $(TARGET_FLAGS_TO_PASS).
545 ALL_TARGET_MODULES
= \
555 # This is a list of the configure targets for all of the modules which
556 # are compiled using the target tools.
557 CONFIGURE_TARGET_MODULES
= \
559 configure-libstdc
++ \
567 # This is a list of the check targets for all of the modules which are
568 # compiled using $(TARGET_FLAGS_TO_PASS).
569 CHECK_TARGET_MODULES
= \
577 # This is a list of the install targets for all of the modules which are
578 # compiled using $(TARGET_FLAGS_TO_PASS).
579 INSTALL_TARGET_MODULES
= \
588 # This is a shell case of all modules which are compiled using
589 # $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
590 TARGET_LIBS
= libio | libstdc
++ | librx | libg
++ | newlib | xiberty | winsup
592 # The first rule in the file had better be this one. Don't put any above it.
596 # The target built for a native build.
600 $(ALL_TARGET_MODULES
) \
604 # Do a target for all the subdirectories. A ``make do-X'' will do a
605 # ``make X'' in all subdirectories (because, in general, there is a
606 # dependency (below) of X upon do-X, a ``make X'' will also do this,
607 # but it may do additional work as well).
608 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
609 # because it is so large that it can easily overflow the command line
610 # length limit on some systems.
619 do-maintainer-clean \
623 @target
=`echo $@ | sed -e 's/^do-//'`; \
625 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
626 for i in
$(SUBDIRS
) $(TARGET_CONFIGDIRS
); do \
627 if
[ -f .
/$$i/Makefile
]; then \
630 for flag in
$(EXTRA_TARGET_FLAGS
); do \
631 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
635 for flag in
$(EXTRA_GCC_FLAGS
); do \
636 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
640 for flag in
$(EXTRA_HOST_FLAGS
); do \
641 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
645 export AR AS CC CXX NM RANLIB
; \
647 $(MAKE
) $(BASE_FLAGS_TO_PASS
) "AR=$${AR}" "AS=$${AS}" \
648 "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
649 "RANLIB=$${RANLIB}" \
651 then true
; else exit
1; fi
; \
655 # Here are the targets which correspond to the do-X targets.
657 .PHONY
: info installcheck dvi install-info
658 .PHONY
: clean distclean mostlyclean maintainer-clean
realclean
659 .PHONY
: local-clean local-distclean local-maintainer-clean
661 installcheck: do-installcheck
664 install-info
: do-install-info
dir.
info
665 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
666 if
[ -f
dir.
info ] ; then \
667 $(INSTALL_DATA
) dir.
info $(infodir)/dir.
info ; \
671 -rm -f
*.a TEMP errs core
*.o
*~ \
#* TAGS *.E
674 -rm -f Makefile config.status
676 local-maintainer-clean
:
677 @echo
"This command is intended for maintainers to use;"
678 @echo
"it deletes files that may require special tools to rebuild."
680 clean: do-clean local-clean
681 mostlyclean: do-mostlyclean local-clean
682 distclean: do-distclean local-clean local-distclean
683 maintainer-clean
: local-maintainer-clean do-maintainer-clean local-clean
684 maintainer-clean
: local-distclean
685 realclean: maintainer-clean
690 check: $(CHECK_MODULES
) \
691 $(CHECK_TARGET_MODULES
) \
692 $(CHECK_X11_MODULES
) \
695 # Installation targets.
697 .PHONY
: install uninstall source-vault binary-vault vault-install
698 install: $(INSTALL_TARGET
)
701 @echo
"the uninstall target is not supported in this tree"
704 $(MAKE
) -f .
/release
/Build-A-Release \
705 host
=$(host_alias
) source-vault
708 $(MAKE
) -f .
/release
/Build-A-Release \
709 host
=$(host_alias
) target
=$(target_alias
)
712 @if
[ -f .
/release
/vault-install
] ; then \
713 .
/release
/vault-install
$(host_alias
) $(target_alias
) ; \
719 install.
all: install-no-fixedincludes
720 @if
[ -f .
/gcc
/Makefile
] ; then \
721 r
=`pwd` ; export r
; \
723 $(MAKE
) $(FLAGS_TO_PASS
) install-headers
) ; \
728 # install-no-fixedincludes is used because Cygnus can not distribute
729 # the fixed header files.
730 .PHONY
: install-no-fixedincludes
731 install-no-fixedincludes
: \
734 $(INSTALL_TARGET_MODULES
) \
735 $(INSTALL_X11_MODULES
) \
738 # Install the gcc headers files, but not the fixed include files,
739 # which Cygnus is not allowed to distribute. This rule is very
740 # dependent on the workings of the gcc Makefile.in.
741 .PHONY
: gcc-no-fixedincludes
742 gcc-no-fixedincludes
:
743 @if
[ -f .
/gcc
/Makefile
]; then \
744 rm -rf gcc
/tmp-include
; \
745 mv gcc
/include gcc
/tmp-include
2>/dev
/null
; \
747 cp
$(srcdir)/gcc
/gsyslimits.h gcc
/include/syslimits.h
; \
748 touch gcc
/stmp-fixinc gcc
/include/fixed
; \
749 rm -f gcc
/stmp-headers gcc
/stmp-int-hdrs
; \
751 srcroot
=`cd $(srcdir); pwd` ; export srcroot
; \
753 $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
754 rm -rf gcc
/include; \
755 mv gcc
/tmp-include gcc
/include 2>/dev
/null
; \
758 # This rule is used to build the modules which use FLAGS_TO_PASS. To
759 # build a target all-X means to cd to X and make all.
761 # all-gui, and all-libproc are handled specially because
762 # they are still experimental, and if they fail to build, that
763 # shouldn't stop "make all".
764 .PHONY
: $(ALL_MODULES
) all-gui all-libproc
765 $(ALL_MODULES
) all-gui all-libproc
:
766 @
dir=`echo $@ | sed -e 's/all-//'`; \
767 if
[ -f .
/$${dir}/Makefile
] ; then \
769 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
770 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) all); \
775 # These rules are used to check the modules which use FLAGS_TO_PASS.
776 # To build a target check-X means to cd to X and make check. Some
777 # modules are only tested in a native toolchain.
779 .PHONY
: $(CHECK_MODULES
) $(NATIVE_CHECK_MODULES
) $(CROSS_CHECK_MODULES
)
780 $(NATIVE_CHECK_MODULES
):
781 @if
[ "$(host_canonical)" = "$(target_canonical)" ] ; then \
782 dir=`echo $@ | sed -e 's/check-//'`; \
783 if
[ -f .
/$${dir}/Makefile
] ; then \
785 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
786 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
792 $(CROSS_CHECK_MODULES
):
793 @
dir=`echo $@ | sed -e 's/check-//'`; \
794 if
[ -f .
/$${dir}/Makefile
] ; then \
796 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
797 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) check); \
802 # This rule is used to install the modules which use FLAGS_TO_PASS.
803 # To build a target install-X means to cd to X and make install.
804 .PHONY
: $(INSTALL_MODULES
)
805 $(INSTALL_MODULES
): install-dirs
806 @
dir=`echo $@ | sed -e 's/install-//'`; \
807 if
[ -f .
/$${dir}/Makefile
] ; then \
809 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
810 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
815 # This rule is used to configure the modules which are built with the
817 .PHONY
: $(CONFIGURE_TARGET_MODULES
)
818 $(CONFIGURE_TARGET_MODULES
):
819 @
dir=`echo $@ | sed -e 's/configure-//'`; \
820 if
[ -f .
/$${dir}/Makefile
] ; then \
822 elif echo
" $(TARGET_CONFIGDIRS) " | grep
" $${dir} " >/dev
/null
2>&1; then \
823 if
[ -d
$(srcdir)/$${dir} ]; then \
824 if
[ -d .
/$${dir} ]; then true
; else mkdir
$${dir}; fi
; \
826 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
827 AR
="$(AR_FOR_TARGET)"; export AR
; \
828 AS
="$(AS_FOR_TARGET)"; export AS
; \
829 CC
="$(CC_FOR_TARGET)"; export CC
; \
830 CFLAGS
="$(CFLAGS_FOR_TARGET)"; export CFLAGS
; \
831 CXX
="$(CXX_FOR_TARGET)"; export CXX
; \
832 CXXFLAGS
="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS
; \
833 NM
="$(NM_FOR_TARGET)"; export NM
; \
834 RANLIB
="$(RANLIB_FOR_TARGET)"; export RANLIB
; \
836 $${srcroot}/configure
$(CONFIG_ARGUMENTS
) --srcdir=$${srcroot}/$${dir}; \
844 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
845 # To build a target all-X means to cd to X and make all.
846 .PHONY
: $(ALL_TARGET_MODULES
)
847 $(ALL_TARGET_MODULES
):
848 @
dir=`echo $@ | sed -e 's/all-//'`; \
849 if
[ -f .
/$${dir}/Makefile
] ; then \
851 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
852 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) all); \
857 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
858 # To build a target install-X means to cd to X and make install.
859 .PHONY
: $(CHECK_TARGET_MODULES
)
860 $(CHECK_TARGET_MODULES
):
861 @
dir=`echo $@ | sed -e 's/check-//'`; \
862 if
[ -f .
/$${dir}/Makefile
] ; then \
864 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
865 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check); \
870 # This rule is used to install the modules which use
871 # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
873 .PHONY
: $(INSTALL_TARGET_MODULES
)
874 $(INSTALL_TARGET_MODULES
): install-dirs
875 @
dir=`echo $@ | sed -e 's/install-//'`; \
876 if
[ -f .
/$${dir}/Makefile
] ; then \
878 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
879 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) install); \
884 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
885 # To build a target all-X means to cd to X and make all.
886 .PHONY
: $(ALL_X11_MODULES
)
888 @
dir=`echo $@ | sed -e 's/all-//'`; \
889 if
[ -f .
/$${dir}/Makefile
] ; then \
891 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
893 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) all); \
898 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
899 # To build a target check-X means to cd to X and make all.
900 .PHONY
: $(CHECK_X11_MODULES
)
901 $(CHECK_X11_MODULES
):
902 @
dir=`echo $@ | sed -e 's/check-//'`; \
903 if
[ -f .
/$${dir}/Makefile
] ; then \
905 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
907 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) check); \
912 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
913 # To build a target install-X means to cd to X and make install.
914 .PHONY
: $(INSTALL_X11_MODULES
)
915 $(INSTALL_X11_MODULES
):
916 @
dir=`echo $@ | sed -e 's/install-//'`; \
917 if
[ -f .
/$${dir}/Makefile
] ; then \
919 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
921 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) install); \
926 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
929 @if
[ -f .
/gcc
/Makefile
] ; then \
931 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
932 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) all); \
939 @if
[ -f .
/gcc
/Makefile
] ; then \
941 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
942 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) check); \
949 @if
[ -f .
/gcc
/Makefile
] ; then \
951 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
952 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
959 # This rule is used to install the modules which use FLAGS_TO_PASS.
960 # To build a target install-X means to cd to X and make install.
961 .PHONY
: install-dosrel
962 install-dosrel
: install-dirs
info
963 @
dir=`echo $@ | sed -e 's/install-//'`; \
964 if
[ -f .
/$${dir}/Makefile
] ; then \
966 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
967 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
975 # This is a list of inter-dependencies among modules.
978 all-binutils
: all-libiberty all-opcodes all-bfd all-flex all-byacc
981 all-dejagnu
: all-tcl all-expect all-tk
982 all-diff
: all-libiberty
984 all-emacs19
: all-byacc
986 all-expect
: all-tcl all-tk
987 all-fileutils
: all-libiberty
989 all-flex
: all-libiberty all-byacc
990 all-gas
: all-libiberty all-opcodes all-bfd
993 all-gcc
: all-libiberty all-byacc all-binutils all-gas all-ld
994 all-gdb
: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim
$(gdbnlmrequirements
)
995 all-gprof
: all-libiberty all-bfd
996 all-grep
: all-libiberty
997 all-gui
: all-gdb all-libproc all-librx
998 all-gzip
: all-libiberty
999 all-hello
: all-libiberty
1001 all-ispell
: all-emacs19
1002 all-ld
: all-libiberty all-bfd all-byacc all-flex
1003 configure-libg
++: all-gcc
1004 all-libg
++: configure-libg
++ all-gas all-ld all-gcc all-xiberty all-newlib all-libio all-librx all-libstdc
++
1005 configure-libgloss
: all-gcc
1006 all-libgloss
: configure-libgloss
1007 configure-libio
: all-gcc
1008 all-libio
: configure-libio all-gas all-ld all-gcc all-xiberty all-newlib
1010 configure-librx
: all-gcc all-newlib
1011 all-librx
: configure-librx
1012 configure-libstdc
++: all-gcc
1013 all-libstdc
++: configure-libstdc
++ all-gas all-ld all-gcc all-xiberty all-newlib all-libio
1014 all-m4
: all-libiberty
1015 all-make
: all-libiberty
1017 configure-newlib
: all-gcc
1018 all-newlib
: configure-newlib all-binutils all-gas all-gcc
1019 all-opcodes
: all-bfd
1021 all-prms
: all-libiberty
1024 all-recode
: all-libiberty
1025 all-sed
: all-libiberty
1026 all-send-pr
: all-prms
1028 all-sim
: all-libiberty all-bfd
1029 all-tar
: all-libiberty
1031 all-tclX
: all-tcl all-tk
1033 all-texinfo
: all-libiberty
1035 all-tgas
: all-libiberty all-bfd
1038 all-winsup
: all-newlib
1039 configure-winsup
: configure-newlib
1040 all-uudecode
: all-libiberty
1041 configure-xiberty
: all-gcc
1042 all-xiberty
: configure-xiberty all-gcc all-ld all-newlib
1044 ### other supporting targets
1051 .PHONY
: install-dirs
1053 @for i in
$(MAKEDIRS
) ; do \
1054 echo Making
$$i...
; \
1055 parent
=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
1056 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
; \
1057 if
[ ! -d
$$i ] ; then \
1058 if mkdir
$$i ; then \
1069 dir.
info: do-install-info
1070 if
[ -f
$(srcdir)/texinfo
/gen-info-dir
] ; then \
1071 $(srcdir)/texinfo
/gen-info-dir
$(infodir) $(srcdir)/texinfo
/dir.info-template
> dir.
info.new
; \
1072 mv
-f
dir.
info.new
dir.
info ; \
1077 @echo
"Building a full distribution of this tree isn't done"
1078 @echo
"via 'make dist'. Check out the etc/ subdirectory"
1082 # Right now this just builds TAGS in each subdirectory. emacs19 has the
1083 # ability to use several tags files at once, so there is probably no need
1084 # to combine them into one big TAGS file (like CVS 1.3 does). We could
1085 # (if we felt like it) have this Makefile write a piece of elisp which
1086 # the user could load to tell emacs19 where all the TAGS files we just
1090 # with the gnu make, this is done automatically.
1092 Makefile
: Makefile.in configure.in
$(host_makefile_frag
) $(target_makefile_frag
)
1093 $(SHELL
) .
/config.status
1096 # Support for building net releases
1098 # Files in devo used in any net release.
1099 # ChangeLog omitted because it may refer to files which are not in this
1100 # distribution (perhaps it would be better to include it anyway).
1101 DEVO_SUPPORT
= README Makefile.in configure configure.in \
1102 config.guess config.sub config move-if-change \
1103 mpw-README mpw-build.in mpw-config.in mpw-configure \
1104 COPYING COPYING.LIB
install.sh
1106 # Files in devo/etc used in any net release.
1107 # ChangeLog omitted because it may refer to files which are not in this
1108 # distribution (perhaps it would be better to include it anyway).
1109 ETC_SUPPORT
= Makefile.in cfg-paper.texi configure.in configure.man \
1110 configure.texi standards.texi make-stds.texi
1111 ETC_SUPPORT_PFX
=configure.
info standards.
info cfg-paper.
info
1113 # When you use `make setup-dirs' or `make taz' you should always redefine
1115 SUPPORT_FILES
= list-of-support-files-for-tool-in-question
1116 # Directories that might want `make diststuff' run.
1117 DISTSTUFFDIRS
= ld gprof gdb libg
++ binutils gnats gas
1118 # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
1119 DISTBISONFILES
= binutils
/Makefile.in gas
/Makefile.in gdb
/Makefile.in
1120 # Directories where "info" should be built.
1121 DISTDOCDIRS
= ld gprof binutils gas bfd libg
++ libio gdb gnats send-pr etc
1125 taz
: $(DEVO_SUPPORT
) $(SUPPORT_FILES
) \
1126 texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1127 # Make sure "diststuff" files get built properly.
1128 for f in
$(DISTBISONFILES
) ; do \
1129 if
[ -r
$$f ]; then \
1130 sed
'/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp
; \
1134 # Take out texinfo from a few places; make simple BISON=bison line.
1135 sed
-e
'/^all\.normal: /s/\all-texinfo //' \
1136 -e
'/^ install-texinfo /d' \
1137 -e
'/^BISON = /,/^$$/d' \
1138 -e
'/^# BISON:/s/.*/BISON = bison -y/' \
1140 mv
-f tmp Makefile.in
1142 $(start-sanitize-Sanitize
)
1143 @if
[ -f .Sanitize
] ; then echo
"RUN Sanitize FIRST!" ; false
; fi
;
1144 $(end-sanitize-Sanitize
)
1146 # Doc files don't change; include them in distribution.
1147 for f in
$(DISTDOCDIRS
) ; do \
1148 if
[ -r
$$f/Makefile
]; then \
1149 (cd
$$f ; $(MAKE
) info) || exit
1 ; \
1152 # Make links, and run "make diststuff" when needed.
1153 # The `echo' for setting `p' is to convert all whitespace to spaces.
1154 # Then the `case' further below should tell whether $$d is in
1156 rm -rf proto-toplev
; mkdir proto-toplev
1157 set
-e
; dirs
="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1158 p
=" `echo $(DISTSTUFFDIRS)` " ; \
1159 for d in
$$dirs ; do \
1160 if
[ -d
$$d ]; then \
1163 (cd
$$d ; $(MAKE
) diststuff
) || exit
1 ;; \
1165 if
[ -d
$$d/proto-
$$d.
dir ]; then \
1166 ln
-s ..
/$$d/proto-
$$d.
dir proto-toplev
/$$d ; \
1168 ln
-s ..
/$$d proto-toplev
/$$d ; \
1170 else ln
-s ..
/$$d proto-toplev
/$$d ; fi
; \
1174 mkdir proto-toplev
/etc
1175 (cd proto-toplev
/etc
; \
1176 for i in
$(ETC_SUPPORT
); do \
1177 ln
-s ..
/..
/etc
/$$i .
; \
1179 for i in
$(ETC_SUPPORT_PFX
); do \
1180 ln
-s ..
/..
/etc
/$$i* .
; \
1183 # Take out texinfo from configurable dirs
1184 rm proto-toplev
/configure.in
1185 sed
-e
'/^host_tools=/s/texinfo //' \
1186 <configure.in
>proto-toplev
/configure.in
1188 mkdir proto-toplev
/texinfo
1189 ln
-s ..
/..
/texinfo
/texinfo.
tex proto-toplev
/texinfo
/
1190 ln
-s ..
/..
/texinfo
/gpl.texinfo proto-toplev
/texinfo
/
1191 ln
-s ..
/..
/texinfo
/lgpl.texinfo proto-toplev
/texinfo
/
1192 ln
-s ..
/..
/texinfo
/tex3patch proto-toplev
/texinfo
/
1193 chmod og
=u
`find . -print`
1194 (VER
=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
1195 echo
"==> Making $(TOOL)-$$VER.tar.gz"; \
1196 rm -f
$(TOOL
)-$$VER; ln
-s proto-toplev
$(TOOL
)-$$VER; \
1197 tar cfh
- $(TOOL
)-$$VER \
1198 |
$(GZIPPROG
) -v
-9 >$(TOOL
)-$$VER.
tar.gz
)
1200 TEXINFO_SUPPORT
= texinfo
/texinfo.
tex texinfo
/gpl.texinfo texinfo
/lgpl.texinfo
1201 DIST_SUPPORT
= $(DEVO_SUPPORT
) $(TEXINFO_SUPPORT
)
1204 GAS_SUPPORT_DIRS
= bfd
include libiberty opcodes
1205 gas.
tar.gz
: $(DIST_SUPPORT
) $(GAS_SUPPORT_DIRS
) gas
1206 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1207 SUPPORT_FILES
="$(GAS_SUPPORT_DIRS)"
1209 # The FSF "binutils" release includes gprof and ld.
1210 .PHONY
: binutils.
tar.gz
1211 BINUTILS_SUPPORT_DIRS
= bfd gas
include libiberty opcodes
ld gprof
1212 binutils.
tar.gz
: $(DIST_SUPPORT
) $(BINUTILS_SUPPORT_DIRS
) binutils
1213 $(MAKE
) -f Makefile.in taz TOOL
=binutils \
1214 SUPPORT_FILES
="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1216 .PHONY
: gas
+binutils.
tar.gz
1217 GASB_SUPPORT_DIRS
= $(GAS_SUPPORT_DIRS
) binutils
ld gprof
1218 gas
+binutils.
tar.gz
: $(DIST_SUPPORT
) $(GASB_SUPPORT_DIRS
) gas
1219 $(MAKE
) -f Makefile.in taz TOOL
=gas \
1220 SUPPORT_FILES
="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1222 .PHONY
: libg
++.
tar.gz
1223 LIBGXX_SUPPORT_DIRS
=include libstdc
++ libio librx libiberty xiberty
1224 libg
++.
tar.gz
: $(DIST_SUPPORT
) libg
++
1225 $(MAKE
) -f Makefile.in taz TOOL
=libg
++ \
1226 SUPPORT_FILES
="$(LIBGXX_SUPPORT_DIRS)"
1228 GNATS_SUPPORT_DIRS
=include libiberty send-pr
1229 gnats.
tar.gz
: $(DIST_SUPPORT
) $(GNATS_SUPPORT_DIRS
) gnats
1230 $(MAKE
) -f Makefile.in taz TOOL
=gnats \
1231 SUPPORT_FILES
="$(GNATS_SUPPORT_DIRS)"
1234 GDB_SUPPORT_DIRS
= bfd
include libiberty mmalloc opcodes readline sim utils
1235 GDBTK_SUPPORT_DIRS
= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
1236 gdb.
tar.gz
: $(DIST_SUPPORT
) $(GDB_SUPPORT_DIRS
) gdb
1237 $(MAKE
) -f Makefile.in taz TOOL
=gdb \
1238 SUPPORT_FILES
="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
1240 .PHONY
: newlib.
tar.gz
1241 NEWLIB_SUPPORT_DIRS
=libgloss
1242 # taz configures for the sun4 target which won't configure newlib.
1243 # We need newlib configured so that the .info files are made.
1244 # Unfortunately, it is not enough to just configure newlib separately:
1245 # taz will build the .info files but since SUBDIRS won't contain newlib,
1246 # distclean won't be run (leaving Makefile, config.status, and the tmp files
1247 # used in building the .info files, eg: *.def, *.ref).
1248 # Compensate here by configuring newlib for a simple (no multilib support)
1249 # cross target (sparc64), building the info files, and doing make distclean
1251 newlib.
tar.gz
: $(DIST_SUPPORT
) $(NEWLIB_SUPPORT_DIRS
) newlib
1253 cd newlib
&& ..
/configure
--srcdir $$rootme/newlib \
1254 --host sun4
--target sparc64-elf
1255 cd newlib
; make
info
1256 cd newlib
; make
distclean
1257 $(MAKE
) -f Makefile.in taz TOOL
=newlib \
1258 SUPPORT_FILES
="$(NEWLIB_SUPPORT_DIRS)" \
1259 DEVO_SUPPORT
="$(DEVO_SUPPORT) COPYING.NEWLIB" \
1260 DISTDOCDIRS
="$(DISTDOCDIRS) newlib"
1265 # start-sanitize-chill
1266 ## This is ugly, but I don't want GNU make to put these variables in
1267 ## the environment. Older makes will see this as a set of targets
1268 ## with no dependencies and no actions.
1269 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET
:
1270 # end-sanitize-chill
1272 # end of Makefile.in