Makefile.in

   1 #
   2 # Makefile for directory with subdirs to build.
   3 #   Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
  18 #
  19
  20 srcdir = .
  21
  22 prefix = /usr/local
  23
  24 exec_prefix = $(prefix)
  25 bindir = $(exec_prefix)/bin
  26 libdir = $(exec_prefix)/lib
  27 tooldir = $(exec_prefix)/$(target)
  28
  29 program_transform_name =
  30
  31 datadir = $(prefix)/lib
  32 mandir = $(prefix)/man
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = $(prefix)/info
  43 includedir = $(prefix)/include
  44 docdir = $(datadir)/doc
  45
  46 SHELL = /bin/sh
  47
  48 INSTALL = $${srcroot}/install.sh -c
  49 INSTALL_PROGRAM = $(INSTALL)
  50 INSTALL_DATA = $(INSTALL) -m 644
  51 INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
  52
  53 INSTALL_DOSREL = install-dosrel-fake
  54
  55 AS = as
  56 AR = ar
  57 AR_FLAGS = rc
  58 CC = cc
  59
  60 # Special variables passed down in EXTRA_GCC_FLAGS.  They are defined
  61 # here so that they can be overridden by Makefile fragments.
  62 HOST_CC = $(CC_FOR_BUILD)
  63 HOST_PREFIX =
  64 HOST_PREFIX_1 = loser-
  65
  66 # We don't specify -g -O because many compilers don't support -g -O,
  67 # and/or -O is broken in and of itself.
  68 CFLAGS = -g
  69 LIBCFLAGS = $(CFLAGS)
  70 CFLAGS_FOR_TARGET = $(CFLAGS)
  71 LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
  72
  73 # start-sanitize-chill
  74 CHILLFLAGS = $(CFLAGS)
  75 CHILL_LIB = -lchill
  76 # end-sanitize-chill
  77 CXX = gcc
  78
  79 # Use -O2 to stress test the compiler.
  80 CXXFLAGS = -g -O2 -fno-implicit-templates
  81 LIBCXXFLAGS = $(CXXFLAGS)
  82 CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
  83 LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET)
  84
  85 RANLIB = ranlib
  86 NM = nm
  87 # Not plain GZIP, since gzip looks there for extra command-line options.
  88 GZIPPROG = gzip
  89
  90 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
  91 BISON = `if [ -f $$r/byacc/byacc ] ; \
  92             then echo $$r/byacc/byacc ; \
  93             else echo byacc ; \
  94         fi`
  95
  96 LEX = `if [ -f $$r/flex/flex ] ; \
  97         then echo $$r/flex/flex ; \
  98         else echo flex ; fi`
  99
 100 M4 = `if [ -f $$r/m4/m4 ] ; \
 101         then echo $$r/m4/m4 ; \
 102         else echo m4 ; fi`
 103
 104 MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
 105         then echo $$r/texinfo/makeinfo/makeinfo ; \
 106         else echo makeinfo ; fi`
 107
 108 # This just becomes part of the MAKEINFO definition passed down to
 109 # sub-makes.  It lets flags be given on the command line while still
 110 # using the makeinfo from the object tree.
 111 MAKEINFOFLAGS =
 112
 113 EXPECT = `if [ -f $$r/expect/expect ] ; \
 114         then echo $$r/expect/expect ; \
 115         else echo expect ; fi`
 116
 117 RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \
 118         then echo $${srcroot}/dejagnu/runtest ; \
 119         else echo runtest ; fi`
 120
 121
 122 # libraries that may need to be augmented on a system-by-system basis
 123 X11_LIB = -lX11
 124
 125 # compilers to use to create programs which must be run in the build
 126 # environment.
 127 CC_FOR_BUILD = $(CC)
 128 CXX_FOR_BUILD = $(CXX)
 129
 130 SUBDIRS = "this is set via configure, don't edit this"
 131 OTHERS =
 132
 133 ALL = all.normal
 134 INSTALL_TARGET = install-dirs \
 135         $(INSTALL_MODULES) \
 136         $(INSTALL_TARGET_MODULES) \
 137         $(INSTALL_X11_MODULES) \
 138         install-gcc \
 139         $(INSTALL_DOSREL)
 140
 141
 142 CC_FOR_TARGET = ` \
 143   if [ -f $$r/gcc/Makefile ] ; then \
 144     if [ -f $$r/newlib/Makefile ] ; then \
 145       echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
 146     else \
 147       echo $$r/gcc/xgcc -B$$r/gcc/; \
 148     fi; \
 149   else \
 150     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 151       echo $(CC); \
 152     else \
 153       t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
 154     fi; \
 155   fi`
 156
 157 # start-sanitize-chill
 158 CHILL_FOR_TARGET = ` \
 159   if [ -f $$r/gcc/Makefile ] ; then \
 160     echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/chillrt/; \
 161   else \
 162     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 163       echo $(CC); \
 164     else \
 165       t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
 166     fi; \
 167   fi`
 168
 169 # end-sanitize-chill
 170
 171 CXX_FOR_TARGET = ` \
 172   if [ -f $$r/gcc/Makefile ] ; then \
 173     if [ -f $$r/newlib/Makefile ] ; then \
 174       echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
 175     else \
 176       echo $$r/gcc/xgcc -B$$r/gcc/; \
 177     fi; \
 178   else \
 179     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 180       echo $(CXX); \
 181     else \
 182       t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
 183     fi; \
 184   fi`
 185
 186 AS_FOR_TARGET = ` \
 187   if [ -f $$r/gas/Makefile ] ; then \
 188     echo $$r/gas/as.new ; \
 189   else \
 190     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 191       echo $(AS); \
 192     else \
 193        t='$(program_transform_name)'; echo as | sed -e 's/brokensed/brokensed/' $$t ; \
 194     fi; \
 195   fi`
 196
 197 AR_FOR_TARGET = ` \
 198   if [ -f $$r/binutils/ar ] ; then \
 199     echo $$r/binutils/ar ; \
 200   else \
 201     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 202       echo $(AR); \
 203     else \
 204        t='$(program_transform_name)'; echo ar | sed -e 's/brokensed/brokensed/' $$t ; \
 205     fi; \
 206   fi`
 207
 208 RANLIB_FOR_TARGET = ` \
 209   if [ -f $$r/binutils/ranlib ] ; then \
 210     echo $$r/binutils/ranlib ; \
 211   else \
 212     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 213       echo $(RANLIB); \
 214     else \
 215        t='$(program_transform_name)'; echo ranlib | sed -e 's/brokensed/brokensed/' $$t ; \
 216     fi; \
 217   fi`
 218
 219 NM_FOR_TARGET = ` \
 220   if [ -f $$r/binutils/Makefile ] ; then \
 221     echo $$r/binutils/nm.new ; \
 222   else \
 223     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 224       echo $(NM); \
 225     else \
 226        t='$(program_transform_name)'; echo nm | sed -e 's/brokensed/brokensed/' $$t ; \
 227     fi; \
 228   fi`
 229
 230
 231 #### host and target specific makefile fragments come in here.
 232 ###
 233
 234 # Flags to pass down to all sub-makes.
 235 # Please keep these in alphabetical order.
 236 BASE_FLAGS_TO_PASS = \
 237         "AR_FLAGS=$(AR_FLAGS)" \
 238         "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
 239         "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
 240         "BISON=$(BISON)" \
 241         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 242         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 243         "CFLAGS=$(CFLAGS)" \
 244         "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 245         $(start-sanitize-chill)\
 246         "CHILLFLAGS=$(CHILLFLAGS)" \
 247         "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
 248         "CHILL_LIB=$(CHILL_LIB)" \
 249         $(end-sanitize-chill)\
 250         "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
 251         "CXXFLAGS=$(CXXFLAGS)" \
 252         "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
 253         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 254         "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
 255         "INSTALL=$(INSTALL)" \
 256         "INSTALL_DATA=$(INSTALL_DATA)" \
 257         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 258         "INSTALL_XFORM=$(INSTALL_XFORM)" \
 259         "LDFLAGS=$(LDFLAGS)" \
 260         "LEX=$(LEX)" \
 261         "LIBCFLAGS=$(LIBCFLAGS)" \
 262         "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 263         "LIBCXXFLAGS=$(LIBCFLAGS)" \
 264         "LIBCXXFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 265         "M4=$(M4)" \
 266         "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 267         "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
 268         "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
 269         "SHELL=$(SHELL)" \
 270         "EXPECT=$(EXPECT)" \
 271         "RUNTEST=$(RUNTEST)" \
 272         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 273         "YACC=$(BISON)" \
 274         "exec_prefix=$(exec_prefix)" \
 275         "prefix=$(prefix)" \
 276         "tooldir=$(tooldir)"
 277
 278 # Flags to pass down to most sub-makes, in which we're building with
 279 # the host environment.
 280 # If any variables are added here, they must be added to do-*, below.
 281 EXTRA_HOST_FLAGS = \
 282         'AR=$(AR)' \
 283         'AS=$(AS)' \
 284         'CC=$(CC)' \
 285         'CXX=$(CXX)' \
 286         'NM=$(NM)' \
 287         'RANLIB=$(RANLIB)'
 288
 289 FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
 290
 291 # Flags that are concerned with the location of the X11 include files
 292 # and library files
 293 X11_FLAGS_TO_PASS = \
 294         "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
 295         "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
 296         "X11_LIB=$(X11_LIB)"
 297
 298 # Flags to pass down to makes which are built with the target environment.
 299 # The double $ decreases the length of the command line; the variables
 300 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
 301 # If any variables are added here, they must be added to do-*, below.
 302 EXTRA_TARGET_FLAGS = \
 303         'AR=$$(AR_FOR_TARGET)' \
 304         'AS=$$(AS_FOR_TARGET)' \
 305         'CC=$$(CC_FOR_TARGET)' \
 306         'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
 307         'CXX=$$(CXX_FOR_TARGET)' \
 308         'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
 309         'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
 310         'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
 311         'NM=$$(NM_FOR_TARGET)' \
 312         'RANLIB=$$(RANLIB_FOR_TARGET)'
 313
 314 TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
 315
 316 # Flags to pass down to gcc.  gcc builds a library, libgcc.a, so it
 317 # unfortunately needs the native compiler and the target ar and
 318 # ranlib.
 319 # If any variables are added here, they must be added to do-*, below.
 320 # The HOST_* variables are a special case, which are used for the gcc
 321 # cross-building scheme.
 322 EXTRA_GCC_FLAGS = \
 323         'AR=$$(AR_FOR_TARGET)' \
 324         'AS=$(AS)' \
 325         'CC=$(CC)' \
 326         'CXX=$(CXX)' \
 327         'HOST_CC=$(CC_FOR_BUILD)' \
 328         'HOST_PREFIX=$(HOST_PREFIX)' \
 329         'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
 330         'NM=$(NM)' \
 331         'RANLIB=$$(RANLIB_FOR_TARGET)'
 332
 333 GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
 334
 335 # This is a list of the targets for all of the modules which are compiled
 336 # using $(FLAGS_TO_PASS).
 337 ALL_MODULES = \
 338         all-autoconf \
 339         all-bfd \
 340         all-binutils \
 341         all-byacc \
 342         all-cvs \
 343         all-dejagnu \
 344         all-diff \
 345         all-dosutils \
 346         all-etc \
 347         all-fileutils \
 348         all-find \
 349         all-flex \
 350         all-gas \
 351         all-gawk \
 352         all-gdb \
 353         all-gprof \
 354         all-grep \
 355         all-gzip \
 356         all-hello \
 357         all-indent \
 358         all-ispell \
 359         all-ld \
 360         all-libiberty \
 361         all-m4 \
 362         all-make \
 363         all-mmalloc \
 364         all-opcodes \
 365         all-pagas \
 366         all-patch \
 367         all-prms \
 368         all-rcs \
 369         all-readline \
 370         all-release \
 371         all-recode \
 372         all-sed \
 373         all-send-pr \
 374         all-shellutils \
 375         all-sim \
 376         all-tar \
 377         all-tcl \
 378         all-texinfo \
 379         all-textutils \
 380         all-tgas \
 381         all-time \
 382         all-uudecode \
 383         all-wdiff
 384
 385 # This is a list of the check targets for all of the modules which are
 386 # compiled using $(FLAGS_TO_PASS).
 387 # This is a list of the check targets for all of the modules which are
 388 # compiled using $(FLAGS_TO_PASS).
 389 #
 390 # The list is in two parts.  The first lists those tools which
 391 # are tested as part of the host's native tool-chain, and not
 392 # tested in a cross configuration.
 393 NATIVE_CHECK_MODULES = \
 394         check-byacc \
 395         check-flex
 396
 397 CROSS_CHECK_MODULES = \
 398         check-autoconf \
 399         check-bfd \
 400         check-binutils \
 401         check-cvs \
 402         check-dejagnu \
 403         check-diff \
 404         check-etc \
 405         check-fileutils \
 406         check-find \
 407         check-gas \
 408         check-gawk \
 409         check-gdb \
 410         check-gprof \
 411         check-grep \
 412         check-gzip \
 413         check-hello \
 414         check-indent \
 415         check-ispell \
 416         check-ld \
 417         check-libiberty \
 418         check-m4 \
 419         check-make \
 420         check-mmcheckoc \
 421         check-opcodes \
 422         check-pagas \
 423         check-patch \
 424         check-prms \
 425         check-rcs \
 426         check-readline \
 427         check-recode \
 428         check-sed \
 429         check-send-pr \
 430         check-shellutils \
 431         check-sim \
 432         check-tar \
 433         check-tcl \
 434         check-texinfo \
 435         check-textutils \
 436         check-tgas \
 437         check-time \
 438         check-uudecode \
 439         check-wdiff
 440
 441 CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 442
 443 # This is a list of the install targets for all of the modules which are
 444 # compiled using $(FLAGS_TO_PASS).
 445 INSTALL_MODULES = \
 446         install-autoconf \
 447         install-bfd \
 448         install-binutils \
 449         install-byacc \
 450         install-cvs \
 451         install-dejagnu \
 452         install-diff \
 453         install-dosutils \
 454         install-etc \
 455         install-fileutils \
 456         install-find \
 457         install-flex \
 458         install-gas \
 459         install-gawk \
 460         install-gdb \
 461         install-glob \
 462         install-gprof \
 463         install-grep \
 464         install-gzip \
 465         install-hello \
 466         install-indent \
 467         install-ispell \
 468         install-ld \
 469         install-libiberty \
 470         install-m4 \
 471         install-make \
 472         install-mmalloc \
 473         install-opcodes \
 474         install-pagas \
 475         install-patch \
 476         install-prms \
 477         install-rcs \
 478         install-readline \
 479         install-recode \
 480         install-sed \
 481         install-send-pr \
 482         install-shellutils \
 483         install-sim \
 484         install-tar \
 485         install-tcl \
 486         install-texinfo \
 487         install-textutils \
 488         install-tgas \
 489         install-time \
 490         install-uudecode \
 491         install-wdiff
 492
 493 # This is a list of the targets for all of the modules which are compiled
 494 # using $(X11_FLAGS_TO_PASS).
 495 ALL_X11_MODULES = \
 496         all-emacs \
 497         all-emacs19 \
 498         all-expect \
 499         all-gash \
 500         all-tclX \
 501         all-tk
 502
 503 # This is a list of the check targets for all of the modules which are
 504 # compiled using $(X11_FLAGS_TO_PASS).
 505 CHECK_X11_MODULES = \
 506         check-emacs \
 507         check-expect \
 508         check-gash \
 509         check-tclX \
 510         check-tk
 511
 512 # This is a list of the install targets for all the modules which are
 513 # compiled using $(X11_FLAGS_TO_PASS).
 514 INSTALL_X11_MODULES = \
 515         install-emacs \
 516         install-emacs19 \
 517         install-expect \
 518         install-gash \
 519         install-tclX \
 520         install-tk
 521
 522 # This is a list of the targets for all of the modules which are compiled
 523 # using $(TARGET_FLAGS_TO_PASS).
 524 ALL_TARGET_MODULES = \
 525         $(start-sanitize-chill) \
 526         all-chillrt \
 527         $(end-sanitize-chill) \
 528         all-libio \
 529         all-libstdc++ \
 530         all-librx \
 531         all-libg++ \
 532         all-newlib \
 533         all-libgloss \
 534         all-xiberty
 535
 536 # This is a list of the check targets for all of the modules which are
 537 # compiled using $(TARGET_FLAGS_TO_PASS).
 538 CHECK_TARGET_MODULES = \
 539         $(start-sanitize-chill) \
 540         check-chillrt \
 541         $(end-sanitize-chill) \
 542         check-libio \
 543         check-libstdc++ \
 544         check-libg++ \
 545         check-newlib \
 546         check-xiberty
 547
 548 # This is a list of the install targets for all of the modules which are
 549 # compiled using $(TARGET_FLAGS_TO_PASS).
 550 INSTALL_TARGET_MODULES = \
 551         $(start-sanitize-chill) \
 552         install-chillrt \
 553         $(end-sanitize-chill) \
 554         install-libio \
 555         install-libstdc++ \
 556         install-libg++ \
 557         install-newlib \
 558         install-libgloss \
 559         install-xiberty
 560
 561 # This is a shell case of all modules which are compiled using
 562 # $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
 563 TARGET_LIBS = libio | libstdc++ | librx | libg++ | newlib | xiberty
 564 # start-sanitize-chill
 565 TARGET_LIBS = chillrt | libio | libstdc++ | librx | libg++ | newlib | xiberty
 566 # end-sanitize-chill
 567
 568 # The first rule in the file had better be this one.  Don't put any above it.
 569 all: all.normal
 570 .PHONY: all
 571
 572 # The target built for a native build.
 573 .PHONY: all.normal
 574 all.normal: \
 575         $(ALL_MODULES) \
 576         $(ALL_TARGET_MODULES) \
 577         $(ALL_X11_MODULES) \
 578         all-gcc
 579
 580 # Do a target for all the subdirectories.  A ``make do-X'' will do a
 581 # ``make X'' in all subdirectories (because, in general, there is a
 582 # dependency (below) of X upon do-X, a ``make X'' will also do this,
 583 # but it may do additional work as well).
 584 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
 585 # because it is so large that it can easily overflow the command line
 586 # length limit on some systems.
 587 DO_X = \
 588         do-clean \
 589         do-distclean \
 590         do-dvi \
 591         do-info \
 592         do-install-info \
 593         do-installcheck \
 594         do-mostlyclean \
 595         do-realclean \
 596         do-TAGS
 597 .PHONY: $(DO_X)
 598 $(DO_X):
 599         @target=`echo $@ | sed -e 's/^do-//'`; \
 600         r=`pwd`; export r; \
 601         srcroot=`cd $(srcdir); pwd`; export srcroot; \
 602         for i in $(SUBDIRS); do \
 603           if [ -f ./$$i/Makefile ]; then \
 604             case $$i in \
 605             $(TARGET_LIBS) ) \
 606               for flag in $(EXTRA_TARGET_FLAGS); do \
 607                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 608               done; \
 609               ;; \
 610             gcc) \
 611               for flag in $(EXTRA_GCC_FLAGS); do \
 612                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 613               done; \
 614               ;; \
 615             *) \
 616               for flag in $(EXTRA_HOST_FLAGS); do \
 617                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 618               done; \
 619               ;; \
 620             esac ; \
 621             export AR AS CC CXX NM RANLIB; \
 622             if (cd ./$$i; \
 623                 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 624                         "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
 625                         "RANLIB=$${RANLIB}" \
 626                         $${target}); \
 627             then true; else exit 1; fi; \
 628           else true; fi; \
 629         done
 630
 631 # Here are the targets which correspond to the do-X targets.
 632
 633 .PHONY: info installcheck dvi install-info
 634 .PHONY: clean distclean mostlyclean realclean local-clean local-distclean
 635 info: do-info
 636 installcheck: do-installcheck
 637 dvi: do-dvi
 638
 639 install-info: do-install-info dir.info
 640         srcroot=`cd $(srcdir); pwd`; export srcroot; \
 641         if [ -f dir.info ] ; then \
 642           $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
 643         else true ; fi
 644
 645 local-clean:
 646         -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
 647
 648 local-distclean:
 649         -rm -f Makefile config.status
 650
 651 clean: do-clean local-clean
 652 mostlyclean: do-mostlyclean local-clean
 653 distclean: do-distclean local-clean local-distclean
 654 realclean: do-realclean local-clean local-distclean
 655
 656 # Check target.
 657
 658 .PHONY: check
 659 check: $(CHECK_MODULES) \
 660         $(CHECK_TARGET_MODULES) \
 661         $(CHECK_X11_MODULES) \
 662         check-gcc
 663
 664 # Installation targets.
 665
 666 .PHONY: install uninstall vault-install
 667 install: $(INSTALL_TARGET)
 668
 669 uninstall:
 670         @echo "the uninstall target is not supported in this tree"
 671
 672 vault-install:
 673         @if [ -f ./release/vault-install ] ; then \
 674           ./release/vault-install $(host_alias) $(target_alias) ; \
 675         else \
 676           true ; \
 677         fi
 678
 679 .PHONY: install.all
 680 install.all: install-no-fixedincludes
 681         @if [ -f ./gcc/Makefile ] ; then \
 682                 r=`pwd` ; export r ; \
 683                 (cd ./gcc; \
 684                 $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
 685         else \
 686                 true ; \
 687         fi
 688
 689 # install-no-fixedincludes is used because Cygnus can not distribute
 690 # the fixed header files.
 691 .PHONY: install-no-fixedincludes
 692 install-no-fixedincludes: \
 693         install-dirs \
 694         $(INSTALL_MODULES) \
 695         $(INSTALL_TARGET_MODULES) \
 696         $(INSTALL_X11_MODULES) \
 697         gcc-no-fixedincludes
 698
 699 # Install the gcc headers files, but not the fixed include files,
 700 # which Cygnus is not allowed to distribute.  This rule is very
 701 # dependent on the workings of the gcc Makefile.in.
 702 .PHONY: gcc-no-fixedincludes
 703 gcc-no-fixedincludes:
 704         @if [ -f ./gcc/Makefile ]; then \
 705           rm -rf gcc/tmp-include; \
 706           mv gcc/include gcc/tmp-include 2>/dev/null; \
 707           mkdir gcc/include; \
 708           cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
 709           touch gcc/stmp-fixinc gcc/include/fixed; \
 710           rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
 711           r=`pwd`; export r; \
 712           srcroot=`cd $(srcdir); pwd` ; export srcroot; \
 713           (cd ./gcc; \
 714            $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
 715           rm -rf gcc/include; \
 716           mv gcc/tmp-include gcc/include 2>/dev/null; \
 717         else true; fi
 718
 719 # This rule is used to build the modules which use FLAGS_TO_PASS.  To
 720 # build a target all-X means to cd to X and make all.
 721 # all-glob is handled specially because it doesn't actually build.
 722 #
 723 # all-gui, and all-libproc are handled specially because
 724 # they are still experimental, and if they fail to build, that
 725 # shouldn't stop "make all".
 726 .PHONY: $(ALL_MODULES) all-glob all-gui all-libproc
 727 $(ALL_MODULES) all-glob all-gui all-libproc:
 728         @dir=`echo $@ | sed -e 's/all-//'`; \
 729         if [ -f ./$${dir}/Makefile ] ; then \
 730           r=`pwd`; export r; \
 731           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 732           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
 733         else \
 734           true; \
 735         fi
 736
 737 # These rules are used to check the modules which use FLAGS_TO_PASS.
 738 # To build a target check-X means to cd to X and make check.  Some
 739 # modules are only tested in a native toolchain.
 740
 741 .PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 742 $(NATIVE_CHECK_MODULES):
 743         @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 744           dir=`echo $@ | sed -e 's/check-//'`; \
 745           if [ -f ./$${dir}/Makefile ] ; then \
 746             r=`pwd`; export r; \
 747             srcroot=`cd $(srcdir); pwd`; export srcroot; \
 748             (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
 749           else \
 750             true; \
 751           fi; \
 752         fi
 753
 754 $(CROSS_CHECK_MODULES):
 755         @dir=`echo $@ | sed -e 's/check-//'`; \
 756         if [ -f ./$${dir}/Makefile ] ; then \
 757           r=`pwd`; export r; \
 758           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 759           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
 760         else \
 761           true; \
 762         fi
 763
 764 # This rule is used to install the modules which use FLAGS_TO_PASS.
 765 # To build a target install-X means to cd to X and make install.
 766 .PHONY: $(INSTALL_MODULES)
 767 $(INSTALL_MODULES): install-dirs
 768         @dir=`echo $@ | sed -e 's/install-//'`; \
 769         if [ -f ./$${dir}/Makefile ] ; then \
 770           r=`pwd`; export r; \
 771           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 772           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
 773         else \
 774           true; \
 775         fi
 776
 777 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
 778 # To build a target all-X means to cd to X and make all.
 779 .PHONY: $(ALL_TARGET_MODULES)
 780 $(ALL_TARGET_MODULES):
 781         @dir=`echo $@ | sed -e 's/all-//'`; \
 782         if [ -f ./$${dir}/Makefile ] ; then \
 783           r=`pwd`; export r; \
 784           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 785           (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
 786         else \
 787           true; \
 788         fi
 789
 790 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
 791 # To build a target install-X means to cd to X and make install.
 792 .PHONY: $(CHECK_TARGET_MODULES)
 793 $(CHECK_TARGET_MODULES):
 794         @dir=`echo $@ | sed -e 's/check-//'`; \
 795         if [ -f ./$${dir}/Makefile ] ; then \
 796           r=`pwd`; export r; \
 797           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 798           (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \
 799         else \
 800           true; \
 801         fi
 802
 803 # This rule is used to install the modules which use
 804 # TARGET_FLAGS_TO_PASS.  To build a target install-X means to cd to X
 805 # and make install.
 806 .PHONY: $(INSTALL_TARGET_MODULES)
 807 $(INSTALL_TARGET_MODULES): install-dirs
 808         @dir=`echo $@ | sed -e 's/install-//'`; \
 809         if [ -f ./$${dir}/Makefile ] ; then \
 810           r=`pwd`; export r; \
 811           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 812           (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
 813         else \
 814           true; \
 815         fi
 816
 817 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
 818 # To build a target all-X means to cd to X and make all.
 819 .PHONY: $(ALL_X11_MODULES)
 820 $(ALL_X11_MODULES):
 821         @dir=`echo $@ | sed -e 's/all-//'`; \
 822         if [ -f ./$${dir}/Makefile ] ; then \
 823           r=`pwd`; export r; \
 824           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 825           (cd $${dir}; \
 826            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
 827         else \
 828           true; \
 829         fi
 830
 831 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
 832 # To build a target check-X means to cd to X and make all.
 833 .PHONY: $(CHECK_X11_MODULES)
 834 $(CHECK_X11_MODULES):
 835         @dir=`echo $@ | sed -e 's/check-//'`; \
 836         if [ -f ./$${dir}/Makefile ] ; then \
 837           r=`pwd`; export r; \
 838           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 839           (cd $${dir}; \
 840            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
 841         else \
 842           true; \
 843         fi
 844
 845 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
 846 # To build a target install-X means to cd to X and make install.
 847 .PHONY: $(INSTALL_X11_MODULES)
 848 $(INSTALL_X11_MODULES):
 849         @dir=`echo $@ | sed -e 's/install-//'`; \
 850         if [ -f ./$${dir}/Makefile ] ; then \
 851           r=`pwd`; export r; \
 852           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 853           (cd $${dir}; \
 854            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
 855         else \
 856           true; \
 857         fi
 858
 859 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
 860 .PHONY: all-gcc
 861 all-gcc:
 862         @if [ -f ./gcc/Makefile ] ; then \
 863           r=`pwd`; export r; \
 864           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 865           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
 866         else \
 867           true; \
 868         fi
 869
 870 .PHONY: check-gcc
 871 check-gcc:
 872         @if [ -f ./gcc/Makefile ] ; then \
 873           r=`pwd`; export r; \
 874           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 875           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
 876         else \
 877           true; \
 878         fi
 879
 880 .PHONY: install-gcc
 881 install-gcc:
 882         @if [ -f ./gcc/Makefile ] ; then \
 883           r=`pwd`; export r; \
 884           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 885           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
 886         else \
 887           true; \
 888         fi
 889
 890
 891 # EXPERIMENTAL STUFF
 892 # This rule is used to install the modules which use FLAGS_TO_PASS.
 893 # To build a target install-X means to cd to X and make install.
 894 .PHONY: install-dosrel
 895 install-dosrel: install-dirs info
 896         @dir=`echo $@ | sed -e 's/install-//'`; \
 897         if [ -f ./$${dir}/Makefile ] ; then \
 898           r=`pwd`; export r; \
 899           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 900           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
 901         else \
 902           true; \
 903         fi
 904
 905 install-dosrel-fake:
 906
 907
 908 # This is a list of inter-dependencies among modules.
 909 all-autoconf: all-m4
 910 all-bfd:
 911 all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
 912 all-byacc:
 913 # start-sanitize-chill
 914 all-chillrt: all-binutils all-gas all-gcc all-newlib
 915 # end-sanitize-chill
 916 all-cvs:
 917 all-dejagnu: all-tcl all-expect all-tk
 918 all-diff: all-libiberty
 919 all-emacs:
 920 all-emacs19: all-byacc
 921 all-etc:
 922 all-expect: all-tcl all-tk
 923 all-fileutils: all-libiberty
 924 all-find:
 925 all-flex: all-libiberty all-byacc
 926 all-gas: all-libiberty all-opcodes all-bfd
 927 all-gash: all-tcl
 928 all-gawk:
 929 all-gcc: all-libiberty all-byacc all-binutils all-gas all-pagas
 930 all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim all-gcc all-ld
 931 all-glob:
 932 all-gprof: all-libiberty all-bfd
 933 all-grep: all-libiberty
 934 all-gui: all-gdb all-libproc all-librx
 935 all-gzip: all-libiberty
 936 all-hello: all-libiberty
 937 all-indent:
 938 all-ispell: all-emacs19
 939 all-ld: all-libiberty all-bfd all-byacc all-flex
 940 all-libg++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib \
 941         all-libio all-librx
 942 all-libio: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib
 943 all-libiberty:
 944 all-libstdc++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib \
 945         all-libio
 946 all-m4: all-libiberty
 947 all-make: all-libiberty
 948 all-mmalloc:
 949 all-newlib: all-binutils all-gas all-pagas all-gcc
 950 all-opcodes: all-bfd
 951 all-patch:
 952 all-prms: all-libiberty
 953 all-rcs:
 954 all-readline:
 955 all-recode: all-libiberty
 956 all-sed: all-libiberty
 957 all-send-pr: all-prms
 958 all-shellutils:
 959 all-sim: all-libiberty all-bfd
 960 all-tar: all-libiberty
 961 all-tcl:
 962 all-tclX: all-tcl all-tk
 963 all-tk: all-tcl
 964 all-texinfo: all-libiberty
 965 all-textutils:
 966 all-tgas: all-libiberty all-bfd
 967 all-time:
 968 all-wdiff:
 969 all-uudecode: all-libiberty
 970 all-xiberty: all-gcc all-ld all-newlib
 971
 972 ### other supporting targets
 973
 974 MAKEDIRS= \
 975         $(prefix) \
 976         $(exec_prefix) \
 977         $(tooldir)
 978
 979 .PHONY: install-dirs
 980 install-dirs:
 981         @for i in $(MAKEDIRS) ; do \
 982                 echo Making $$i... ; \
 983                 parent=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
 984                 if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
 985                 if [ ! -d $$i ] ; then \
 986                         if mkdir $$i ; then \
 987                                 true ; \
 988                         else \
 989                                 exit 1 ; \
 990                         fi ; \
 991                 else \
 992                         true ; \
 993                 fi ; \
 994         done
 995
 996
 997 dir.info: do-install-info
 998         if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
 999           $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
1000           mv -f dir.info.new dir.info ; \
1001         else true ; \
1002         fi
1003
1004 dist:
1005         @echo "Building a full distribution of this tree isn't done"
1006         @echo "via 'make dist'.  Check out the etc/ subdirectory"
1007
1008 etags tags: TAGS
1009
1010 # Right now this just builds TAGS in each subdirectory.  emacs19 has the
1011 # ability to use several tags files at once, so there is probably no need
1012 # to combine them into one big TAGS file (like CVS 1.3 does).  We could
1013 # (if we felt like it) have this Makefile write a piece of elisp which
1014 # the user could load to tell emacs19 where all the TAGS files we just
1015 # built are.
1016 TAGS: do-TAGS
1017
1018 # with the gnu make, this is done automatically.
1019
1020 Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
1021         $(SHELL) ./config.status
1022
1023 #
1024 # Support for building net releases
1025
1026 # Files in devo used in any net release.
1027 # ChangeLog omitted because it may refer to files which are not in this
1028 # distribution (perhaps it would be better to include it anyway).
1029 DEVO_SUPPORT= README Makefile.in configure configure.in \
1030         config.guess config.sub config move-if-change \
1031         COPYING COPYING.LIB install.sh
1032
1033 # Files in devo/etc used in any net release.
1034 # ChangeLog omitted because it may refer to files which are not in this
1035 # distribution (perhaps it would be better to include it anyway).
1036 ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
1037         configure.texi standards.texi make-stds.texi
1038 ETC_SUPPORT_PFX=configure.info standards.info cfg-paper.info
1039
1040 # When you use `make setup-dirs' or `make taz' you should always redefine
1041 # this macro.
1042 SUPPORT_FILES = list-of-support-files-for-tool-in-question
1043 # Directories that might want `make diststuff' run.
1044 DISTSTUFFDIRS= ld gprof gdb libg++ binutils gnats gas
1045 # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
1046 DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
1047 # Directories where "info" should be built.
1048 DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb gnats send-pr etc
1049
1050 .PHONY: taz
1051
1052 taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
1053   texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
1054         # Make sure "diststuff" files get built properly.
1055         for f in $(DISTBISONFILES) ; do \
1056           if [ -r $$f ]; then \
1057             sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \
1058             mv -f tmp $$f ; \
1059           else true; fi ; \
1060         done
1061         # Take out texinfo from a few places; make simple BISON=bison line.
1062         sed -e '/^all\.normal: /s/\all-texinfo //' \
1063             -e '/^      install-texinfo /d' \
1064             -e '/^BISON = /,/^$$/d' \
1065             -e '/^# BISON:/s/.*/BISON = bison -y/' \
1066         <Makefile.in >tmp
1067         mv -f tmp Makefile.in
1068         #
1069         $(start-sanitize-Sanitize)
1070         @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
1071         $(end-sanitize-Sanitize)
1072         ./configure sun4
1073         # Doc files don't change; include them in distribution.
1074         for f in $(DISTDOCDIRS) ; do \
1075           if [ -r $$f/Makefile ]; then \
1076             (cd $$f ; $(MAKE) info) || exit 1 ; \
1077           else true ; fi ; \
1078         done
1079         # Make links, and run "make diststuff" when needed.
1080         # The `echo' for setting `p' is to convert all whitespace to spaces.
1081         # Then the `case' further below should tell whether $$d is in
1082         # DISTSTUFFDIRS.
1083         rm -rf proto-toplev ; mkdir proto-toplev
1084         set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1085         p=" `echo $(DISTSTUFFDIRS)` " ; \
1086         for d in $$dirs ; do \
1087           if [ -d $$d ]; then \
1088             case " $$p " in \
1089             *" $$d "*)  \
1090                 echo making diststuff in $$d ; \
1091                 (cd $$d ; pwd ; $(MAKE) diststuff ) || exit 1  ;; \
1092             esac ; \
1093             if [ -d $$d/proto-$$d.dir ]; then \
1094               ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
1095             else \
1096               ln -s ../$$d proto-toplev/$$d ; \
1097             fi ; \
1098           else ln -s ../$$d proto-toplev/$$d ; fi ; \
1099         done
1100         $(MAKE) distclean
1101         #
1102         mkdir proto-toplev/etc
1103         (cd proto-toplev/etc; \
1104          for i in $(ETC_SUPPORT); do \
1105                 ln -s ../../etc/$$i . ; \
1106          done ; \
1107          for i in $(ETC_SUPPORT_PFX); do \
1108                 ln -s ../../etc/$$i* . ; \
1109          done)
1110         #
1111         # Take out texinfo and glob from configurable dirs
1112         rm proto-toplev/configure.in
1113         sed -e '/^host_tools=/s/texinfo //' \
1114             -e '/^host_libs=/s/glob //' \
1115             <configure.in >proto-toplev/configure.in
1116         #
1117         mkdir proto-toplev/texinfo
1118         ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
1119         ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
1120         ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
1121         ln -s ../../texinfo/tex3patch   proto-toplev/texinfo/
1122         chmod og=u `find . -print`
1123         (VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
1124                 echo "==> Making $(TOOL)-$$VER.tar.gz"; \
1125                 rm -f $(TOOL)-$$VER; ln -s proto-toplev $(TOOL)-$$VER; \
1126                 tar cfh - $(TOOL)-$$VER \
1127                 | $(GZIPPROG) -v -9 >$(TOOL)-$$VER.tar.gz )
1128
1129 TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
1130 DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
1131
1132 .PHONY: gas.tar.gz
1133 GAS_SUPPORT_DIRS= bfd include libiberty opcodes
1134 gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
1135         $(MAKE) -f Makefile.in taz TOOL=gas \
1136                 SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
1137
1138 # The FSF "binutils" release includes gprof and ld.
1139 .PHONY: binutils.tar.gz
1140 BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof
1141 binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
1142         $(MAKE) -f Makefile.in taz TOOL=binutils \
1143                 SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1144
1145 .PHONY: gas+binutils.tar.gz
1146 GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
1147 gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
1148         $(MAKE) -f Makefile.in taz TOOL=gas \
1149                 SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1150
1151 .PHONY: libg++.tar.gz
1152 LIBGXX_SUPPORT_DIRS=include libio librx libiberty xiberty
1153 libg++.tar.gz: $(DIST_SUPPORT) libg++
1154         $(MAKE) -f Makefile.in taz TOOL=libg++ \
1155                 SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
1156
1157 GNATS_SUPPORT_DIRS=include libiberty send-pr
1158 gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
1159         $(MAKE) -f  Makefile.in taz TOOL=gnats \
1160                 SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
1161
1162 .PHONY: gdb.tar.gz
1163 GDB_SUPPORT_DIRS= bfd glob include libiberty mmalloc opcodes readline sim
1164 gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
1165         $(MAKE) -f Makefile.in taz TOOL=gdb \
1166                 SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
1167
1168 .PHONY: newlib.tar.gz
1169 NEWLIB_SUPPORT_DIRS=
1170 newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
1171         $(MAKE) -f Makefile.in taz TOOL=newlib \
1172                 SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
1173                 DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" \
1174                 DISTDOCDIRS="$(DISTDOCDIRS) newlib"
1175
1176 .NOEXPORT:
1177 MAKEOVERRIDES=
1178
1179 # start-sanitize-chill
1180 ## This is ugly, but I don't want GNU make to put these variables in
1181 ## the environment.  Older makes will see this as a set of targets
1182 ## with no dependencies and no actions.
1183 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
1184 # end-sanitize-chill
1185
1186 # end of Makefile.in