arch/arm/Kconfig

   1 config ARM
   2         bool
   3         default y
   4         select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
   5         select ARCH_HAS_DEVMEM_IS_ALLOWED
   6         select ARCH_HAS_ELF_RANDOMIZE
   7         select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
   8         select ARCH_HAVE_CUSTOM_GPIO_H
   9         select ARCH_HAS_GCOV_PROFILE_ALL
  10         select ARCH_MIGHT_HAVE_PC_PARPORT
  11         select ARCH_SUPPORTS_ATOMIC_RMW
  12         select ARCH_USE_BUILTIN_BSWAP
  13         select ARCH_USE_CMPXCHG_LOCKREF
  14         select ARCH_WANT_IPC_PARSE_VERSION
  15         select BUILDTIME_EXTABLE_SORT if MMU
  16         select CLONE_BACKWARDS
  17         select CPU_PM if (SUSPEND || CPU_IDLE)
  18         select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
  19         select EDAC_SUPPORT
  20         select EDAC_ATOMIC_SCRUB
  21         select GENERIC_ALLOCATOR
  22         select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
  23         select GENERIC_CLOCKEVENTS_BROADCAST if SMP
  24         select GENERIC_EARLY_IOREMAP
  25         select GENERIC_IDLE_POLL_SETUP
  26         select GENERIC_IRQ_PROBE
  27         select GENERIC_IRQ_SHOW
  28         select GENERIC_IRQ_SHOW_LEVEL
  29         select GENERIC_PCI_IOMAP
  30         select GENERIC_SCHED_CLOCK
  31         select GENERIC_SMP_IDLE_THREAD
  32         select GENERIC_STRNCPY_FROM_USER
  33         select GENERIC_STRNLEN_USER
  34         select HANDLE_DOMAIN_IRQ
  35         select HARDIRQS_SW_RESEND
  36         select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
  37         select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
  38         select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
  39         select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
  40         select HAVE_ARCH_MMAP_RND_BITS if MMU
  41         select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
  42         select HAVE_ARCH_TRACEHOOK
  43         select HAVE_ARM_SMCCC if CPU_V7
  44         select HAVE_CBPF_JIT
  45         select HAVE_CC_STACKPROTECTOR
  46         select HAVE_CONTEXT_TRACKING
  47         select HAVE_C_RECORDMCOUNT
  48         select HAVE_DEBUG_KMEMLEAK
  49         select HAVE_DMA_API_DEBUG
  50         select HAVE_DMA_CONTIGUOUS if MMU
  51         select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU
  52         select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
  53         select HAVE_EXIT_THREAD
  54         select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
  55         select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
  56         select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
  57         select HAVE_GENERIC_DMA_COHERENT
  58         select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
  59         select HAVE_IDE if PCI || ISA || PCMCIA
  60         select HAVE_IRQ_TIME_ACCOUNTING
  61         select HAVE_KERNEL_GZIP
  62         select HAVE_KERNEL_LZ4
  63         select HAVE_KERNEL_LZMA
  64         select HAVE_KERNEL_LZO
  65         select HAVE_KERNEL_XZ
  66         select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
  67         select HAVE_KRETPROBES if (HAVE_KPROBES)
  68         select HAVE_MEMBLOCK
  69         select HAVE_MOD_ARCH_SPECIFIC
  70         select HAVE_NMI
  71         select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
  72         select HAVE_OPTPROBES if !THUMB2_KERNEL
  73         select HAVE_PERF_EVENTS
  74         select HAVE_PERF_REGS
  75         select HAVE_PERF_USER_STACK_DUMP
  76         select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE)
  77         select HAVE_REGS_AND_STACK_ACCESS_API
  78         select HAVE_SYSCALL_TRACEPOINTS
  79         select HAVE_UID16
  80         select HAVE_VIRT_CPU_ACCOUNTING_GEN
  81         select IRQ_FORCED_THREADING
  82         select MODULES_USE_ELF_REL
  83         select NO_BOOTMEM
  84         select OF_EARLY_FLATTREE if OF
  85         select OF_RESERVED_MEM if OF
  86         select OLD_SIGACTION
  87         select OLD_SIGSUSPEND3
  88         select PERF_USE_VMALLOC
  89         select RTC_LIB
  90         select SYS_SUPPORTS_APM_EMULATION
  91         # Above selects are sorted alphabetically; please add new ones
  92         # according to that.  Thanks.
  93         help
  94           The ARM series is a line of low-power-consumption RISC chip designs
  95           licensed by ARM Ltd and targeted at embedded applications and
  96           handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
  97           manufactured, but legacy ARM-based PC hardware remains popular in
  98           Europe.  There is an ARM Linux project with a web page at
  99           <http://www.arm.linux.org.uk/>.
 100
 101 config ARM_HAS_SG_CHAIN
 102         select ARCH_HAS_SG_CHAIN
 103         bool
 104
 105 config NEED_SG_DMA_LENGTH
 106         bool
 107
 108 config ARM_DMA_USE_IOMMU
 109         bool
 110         select ARM_HAS_SG_CHAIN
 111         select NEED_SG_DMA_LENGTH
 112
 113 if ARM_DMA_USE_IOMMU
 114
 115 config ARM_DMA_IOMMU_ALIGNMENT
 116         int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers"
 117         range 4 9
 118         default 8
 119         help
 120           DMA mapping framework by default aligns all buffers to the smallest
 121           PAGE_SIZE order which is greater than or equal to the requested buffer
 122           size. This works well for buffers up to a few hundreds kilobytes, but
 123           for larger buffers it just a waste of address space. Drivers which has
 124           relatively small addressing window (like 64Mib) might run out of
 125           virtual space with just a few allocations.
 126
 127           With this parameter you can specify the maximum PAGE_SIZE order for
 128           DMA IOMMU buffers. Larger buffers will be aligned only to this
 129           specified order. The order is expressed as a power of two multiplied
 130           by the PAGE_SIZE.
 131
 132 endif
 133
 134 config MIGHT_HAVE_PCI
 135         bool
 136
 137 config SYS_SUPPORTS_APM_EMULATION
 138         bool
 139
 140 config HAVE_TCM
 141         bool
 142         select GENERIC_ALLOCATOR
 143
 144 config HAVE_PROC_CPU
 145         bool
 146
 147 config NO_IOPORT_MAP
 148         bool
 149
 150 config EISA
 151         bool
 152         ---help---
 153           The Extended Industry Standard Architecture (EISA) bus was
 154           developed as an open alternative to the IBM MicroChannel bus.
 155
 156           The EISA bus provided some of the features of the IBM MicroChannel
 157           bus while maintaining backward compatibility with cards made for
 158           the older ISA bus.  The EISA bus saw limited use between 1988 and
 159           1995 when it was made obsolete by the PCI bus.
 160
 161           Say Y here if you are building a kernel for an EISA-based machine.
 162
 163           Otherwise, say N.
 164
 165 config SBUS
 166         bool
 167
 168 config STACKTRACE_SUPPORT
 169         bool
 170         default y
 171
 172 config LOCKDEP_SUPPORT
 173         bool
 174         default y
 175
 176 config TRACE_IRQFLAGS_SUPPORT
 177         bool
 178         default !CPU_V7M
 179
 180 config RWSEM_XCHGADD_ALGORITHM
 181         bool
 182         default y
 183
 184 config ARCH_HAS_ILOG2_U32
 185         bool
 186
 187 config ARCH_HAS_ILOG2_U64
 188         bool
 189
 190 config ARCH_HAS_BANDGAP
 191         bool
 192
 193 config FIX_EARLYCON_MEM
 194         def_bool y if MMU
 195
 196 config GENERIC_HWEIGHT
 197         bool
 198         default y
 199
 200 config GENERIC_CALIBRATE_DELAY
 201         bool
 202         default y
 203
 204 config ARCH_MAY_HAVE_PC_FDC
 205         bool
 206
 207 config ZONE_DMA
 208         bool
 209
 210 config NEED_DMA_MAP_STATE
 211        def_bool y
 212
 213 config ARCH_SUPPORTS_UPROBES
 214         def_bool y
 215
 216 config ARCH_HAS_DMA_SET_COHERENT_MASK
 217         bool
 218
 219 config GENERIC_ISA_DMA
 220         bool
 221
 222 config FIQ
 223         bool
 224
 225 config NEED_RET_TO_USER
 226         bool
 227
 228 config ARCH_MTD_XIP
 229         bool
 230
 231 config VECTORS_BASE
 232         hex
 233         default 0xffff0000 if MMU || CPU_HIGH_VECTOR
 234         default DRAM_BASE if REMAP_VECTORS_TO_RAM
 235         default 0x00000000
 236         help
 237           The base address of exception vectors.  This must be two pages
 238           in size.
 239
 240 config ARM_PATCH_PHYS_VIRT
 241         bool "Patch physical to virtual translations at runtime" if EMBEDDED
 242         default y
 243         depends on !XIP_KERNEL && MMU
 244         help
 245           Patch phys-to-virt and virt-to-phys translation functions at
 246           boot and module load time according to the position of the
 247           kernel in system memory.
 248
 249           This can only be used with non-XIP MMU kernels where the base
 250           of physical memory is at a 16MB boundary.
 251
 252           Only disable this option if you know that you do not require
 253           this feature (eg, building a kernel for a single machine) and
 254           you need to shrink the kernel to the minimal size.
 255
 256 config NEED_MACH_IO_H
 257         bool
 258         help
 259           Select this when mach/io.h is required to provide special
 260           definitions for this platform.  The need for mach/io.h should
 261           be avoided when possible.
 262
 263 config NEED_MACH_MEMORY_H
 264         bool
 265         help
 266           Select this when mach/memory.h is required to provide special
 267           definitions for this platform.  The need for mach/memory.h should
 268           be avoided when possible.
 269
 270 config PHYS_OFFSET
 271         hex "Physical address of main memory" if MMU
 272         depends on !ARM_PATCH_PHYS_VIRT
 273         default DRAM_BASE if !MMU
 274         default 0x00000000 if ARCH_EBSA110 || \
 275                         ARCH_FOOTBRIDGE || \
 276                         ARCH_INTEGRATOR || \
 277                         ARCH_IOP13XX || \
 278                         ARCH_KS8695 || \
 279                         (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
 280         default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 281         default 0x20000000 if ARCH_S5PV210
 282         default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
 283         default 0xc0000000 if ARCH_SA1100
 284         help
 285           Please provide the physical address corresponding to the
 286           location of main memory in your system.
 287
 288 config GENERIC_BUG
 289         def_bool y
 290         depends on BUG
 291
 292 config PGTABLE_LEVELS
 293         int
 294         default 3 if ARM_LPAE
 295         default 2
 296
 297 source "init/Kconfig"
 298
 299 source "kernel/Kconfig.freezer"
 300
 301 menu "System Type"
 302
 303 config MMU
 304         bool "MMU-based Paged Memory Management Support"
 305         default y
 306         help
 307           Select if you want MMU-based virtualised addressing space
 308           support by paged memory management. If unsure, say 'Y'.
 309
 310 config ARCH_MMAP_RND_BITS_MIN
 311         default 8
 312
 313 config ARCH_MMAP_RND_BITS_MAX
 314         default 14 if PAGE_OFFSET=0x40000000
 315         default 15 if PAGE_OFFSET=0x80000000
 316         default 16
 317
 318 #
 319 # The "ARM system type" choice list is ordered alphabetically by option
 320 # text.  Please add new entries in the option alphabetic order.
 321 #
 322 choice
 323         prompt "ARM system type"
 324         default ARM_SINGLE_ARMV7M if !MMU
 325         default ARCH_MULTIPLATFORM if MMU
 326
 327 config ARCH_MULTIPLATFORM
 328         bool "Allow multiple platforms to be selected"
 329         depends on MMU
 330         select ARCH_WANT_OPTIONAL_GPIOLIB
 331         select ARM_HAS_SG_CHAIN
 332         select ARM_PATCH_PHYS_VIRT
 333         select AUTO_ZRELADDR
 334         select CLKSRC_OF
 335         select COMMON_CLK
 336         select GENERIC_CLOCKEVENTS
 337         select MIGHT_HAVE_PCI
 338         select MULTI_IRQ_HANDLER
 339         select SPARSE_IRQ
 340         select USE_OF
 341
 342 config ARM_SINGLE_ARMV7M
 343         bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
 344         depends on !MMU
 345         select ARCH_WANT_OPTIONAL_GPIOLIB
 346         select ARM_NVIC
 347         select AUTO_ZRELADDR
 348         select CLKSRC_OF
 349         select COMMON_CLK
 350         select CPU_V7M
 351         select GENERIC_CLOCKEVENTS
 352         select NO_IOPORT_MAP
 353         select SPARSE_IRQ
 354         select USE_OF
 355
 356
 357 config ARCH_CLPS711X
 358         bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 359         select ARCH_REQUIRE_GPIOLIB
 360         select AUTO_ZRELADDR
 361         select COMMON_CLK
 362         select CPU_ARM720T
 363         select GENERIC_CLOCKEVENTS
 364         select CLPS711X_TIMER
 365         select MFD_SYSCON
 366         select SOC_BUS
 367         help
 368           Support for Cirrus Logic 711x/721x/731x based boards.
 369
 370 config ARCH_GEMINI
 371         bool "Cortina Systems Gemini"
 372         select ARCH_REQUIRE_GPIOLIB
 373         select CLKSRC_MMIO
 374         select CPU_FA526
 375         select GENERIC_CLOCKEVENTS
 376         help
 377           Support for the Cortina Systems Gemini family SoCs
 378
 379 config ARCH_EBSA110
 380         bool "EBSA-110"
 381         select ARCH_USES_GETTIMEOFFSET
 382         select CPU_SA110
 383         select ISA
 384         select NEED_MACH_IO_H
 385         select NEED_MACH_MEMORY_H
 386         select NO_IOPORT_MAP
 387         help
 388           This is an evaluation board for the StrongARM processor available
 389           from Digital. It has limited hardware on-board, including an
 390           Ethernet interface, two PCMCIA sockets, two serial ports and a
 391           parallel port.
 392
 393 config ARCH_EP93XX
 394         bool "EP93xx-based"
 395         select ARCH_HAS_HOLES_MEMORYMODEL
 396         select ARCH_REQUIRE_GPIOLIB
 397         select ARM_AMBA
 398         select ARM_PATCH_PHYS_VIRT
 399         select ARM_VIC
 400         select AUTO_ZRELADDR
 401         select CLKDEV_LOOKUP
 402         select CLKSRC_MMIO
 403         select CPU_ARM920T
 404         select GENERIC_CLOCKEVENTS
 405         help
 406           This enables support for the Cirrus EP93xx series of CPUs.
 407
 408 config ARCH_FOOTBRIDGE
 409         bool "FootBridge"
 410         select CPU_SA110
 411         select FOOTBRIDGE
 412         select GENERIC_CLOCKEVENTS
 413         select HAVE_IDE
 414         select NEED_MACH_IO_H if !MMU
 415         select NEED_MACH_MEMORY_H
 416         help
 417           Support for systems based on the DC21285 companion chip
 418           ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 419
 420 config ARCH_NETX
 421         bool "Hilscher NetX based"
 422         select ARM_VIC
 423         select CLKSRC_MMIO
 424         select CPU_ARM926T
 425         select GENERIC_CLOCKEVENTS
 426         help
 427           This enables support for systems based on the Hilscher NetX Soc
 428
 429 config ARCH_IOP13XX
 430         bool "IOP13xx-based"
 431         depends on MMU
 432         select CPU_XSC3
 433         select NEED_MACH_MEMORY_H
 434         select NEED_RET_TO_USER
 435         select PCI
 436         select PLAT_IOP
 437         select VMSPLIT_1G
 438         select SPARSE_IRQ
 439         help
 440           Support for Intel's IOP13XX (XScale) family of processors.
 441
 442 config ARCH_IOP32X
 443         bool "IOP32x-based"
 444         depends on MMU
 445         select ARCH_REQUIRE_GPIOLIB
 446         select CPU_XSCALE
 447         select GPIO_IOP
 448         select NEED_RET_TO_USER
 449         select PCI
 450         select PLAT_IOP
 451         help
 452           Support for Intel's 80219 and IOP32X (XScale) family of
 453           processors.
 454
 455 config ARCH_IOP33X
 456         bool "IOP33x-based"
 457         depends on MMU
 458         select ARCH_REQUIRE_GPIOLIB
 459         select CPU_XSCALE
 460         select GPIO_IOP
 461         select NEED_RET_TO_USER
 462         select PCI
 463         select PLAT_IOP
 464         help
 465           Support for Intel's IOP33X (XScale) family of processors.
 466
 467 config ARCH_IXP4XX
 468         bool "IXP4xx-based"
 469         depends on MMU
 470         select ARCH_HAS_DMA_SET_COHERENT_MASK
 471         select ARCH_REQUIRE_GPIOLIB
 472         select ARCH_SUPPORTS_BIG_ENDIAN
 473         select CLKSRC_MMIO
 474         select CPU_XSCALE
 475         select DMABOUNCE if PCI
 476         select GENERIC_CLOCKEVENTS
 477         select MIGHT_HAVE_PCI
 478         select NEED_MACH_IO_H
 479         select USB_EHCI_BIG_ENDIAN_DESC
 480         select USB_EHCI_BIG_ENDIAN_MMIO
 481         help
 482           Support for Intel's IXP4XX (XScale) family of processors.
 483
 484 config ARCH_DOVE
 485         bool "Marvell Dove"
 486         select ARCH_REQUIRE_GPIOLIB
 487         select CPU_PJ4
 488         select GENERIC_CLOCKEVENTS
 489         select MIGHT_HAVE_PCI
 490         select MULTI_IRQ_HANDLER
 491         select MVEBU_MBUS
 492         select PINCTRL
 493         select PINCTRL_DOVE
 494         select PLAT_ORION_LEGACY
 495         select SPARSE_IRQ
 496         select PM_GENERIC_DOMAINS if PM
 497         help
 498           Support for the Marvell Dove SoC 88AP510
 499
 500 config ARCH_KS8695
 501         bool "Micrel/Kendin KS8695"
 502         select ARCH_REQUIRE_GPIOLIB
 503         select CLKSRC_MMIO
 504         select CPU_ARM922T
 505         select GENERIC_CLOCKEVENTS
 506         select NEED_MACH_MEMORY_H
 507         help
 508           Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 509           System-on-Chip devices.
 510
 511 config ARCH_W90X900
 512         bool "Nuvoton W90X900 CPU"
 513         select ARCH_REQUIRE_GPIOLIB
 514         select CLKDEV_LOOKUP
 515         select CLKSRC_MMIO
 516         select CPU_ARM926T
 517         select GENERIC_CLOCKEVENTS
 518         help
 519           Support for Nuvoton (Winbond logic dept.) ARM9 processor,
 520           At present, the w90x900 has been renamed nuc900, regarding
 521           the ARM series product line, you can login the following
 522           link address to know more.
 523
 524           <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
 525                 ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 526
 527 config ARCH_LPC32XX
 528         bool "NXP LPC32XX"
 529         select ARCH_REQUIRE_GPIOLIB
 530         select ARM_AMBA
 531         select CLKDEV_LOOKUP
 532         select CLKSRC_LPC32XX
 533         select COMMON_CLK
 534         select CPU_ARM926T
 535         select GENERIC_CLOCKEVENTS
 536         select MULTI_IRQ_HANDLER
 537         select SPARSE_IRQ
 538         select USE_OF
 539         help
 540           Support for the NXP LPC32XX family of processors
 541
 542 config ARCH_PXA
 543         bool "PXA2xx/PXA3xx-based"
 544         depends on MMU
 545         select ARCH_MTD_XIP
 546         select ARCH_REQUIRE_GPIOLIB
 547         select ARM_CPU_SUSPEND if PM
 548         select AUTO_ZRELADDR
 549         select COMMON_CLK
 550         select CLKDEV_LOOKUP
 551         select CLKSRC_PXA
 552         select CLKSRC_MMIO
 553         select CLKSRC_OF
 554         select CPU_XSCALE if !CPU_XSC3
 555         select GENERIC_CLOCKEVENTS
 556         select GPIO_PXA
 557         select HAVE_IDE
 558         select IRQ_DOMAIN
 559         select MULTI_IRQ_HANDLER
 560         select PLAT_PXA
 561         select SPARSE_IRQ
 562         help
 563           Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 564
 565 config ARCH_RPC
 566         bool "RiscPC"
 567         depends on MMU
 568         select ARCH_ACORN
 569         select ARCH_MAY_HAVE_PC_FDC
 570         select ARCH_SPARSEMEM_ENABLE
 571         select ARCH_USES_GETTIMEOFFSET
 572         select CPU_SA110
 573         select FIQ
 574         select HAVE_IDE
 575         select HAVE_PATA_PLATFORM
 576         select ISA_DMA_API
 577         select NEED_MACH_IO_H
 578         select NEED_MACH_MEMORY_H
 579         select NO_IOPORT_MAP
 580         help
 581           On the Acorn Risc-PC, Linux can support the internal IDE disk and
 582           CD-ROM interface, serial and parallel port, and the floppy drive.
 583
 584 config ARCH_SA1100
 585         bool "SA1100-based"
 586         select ARCH_MTD_XIP
 587         select ARCH_REQUIRE_GPIOLIB
 588         select ARCH_SPARSEMEM_ENABLE
 589         select CLKDEV_LOOKUP
 590         select CLKSRC_MMIO
 591         select CLKSRC_PXA
 592         select CLKSRC_OF if OF
 593         select CPU_FREQ
 594         select CPU_SA1100
 595         select GENERIC_CLOCKEVENTS
 596         select HAVE_IDE
 597         select IRQ_DOMAIN
 598         select ISA
 599         select MULTI_IRQ_HANDLER
 600         select NEED_MACH_MEMORY_H
 601         select SPARSE_IRQ
 602         help
 603           Support for StrongARM 11x0 based boards.
 604
 605 config ARCH_S3C24XX
 606         bool "Samsung S3C24XX SoCs"
 607         select ARCH_REQUIRE_GPIOLIB
 608         select ATAGS
 609         select CLKDEV_LOOKUP
 610         select CLKSRC_SAMSUNG_PWM
 611         select GENERIC_CLOCKEVENTS
 612         select GPIO_SAMSUNG
 613         select HAVE_S3C2410_I2C if I2C
 614         select HAVE_S3C2410_WATCHDOG if WATCHDOG
 615         select HAVE_S3C_RTC if RTC_CLASS
 616         select MULTI_IRQ_HANDLER
 617         select NEED_MACH_IO_H
 618         select SAMSUNG_ATAGS
 619         help
 620           Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
 621           and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
 622           (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
 623           Samsung SMDK2410 development board (and derivatives).
 624
 625 config ARCH_DAVINCI
 626         bool "TI DaVinci"
 627         select ARCH_HAS_HOLES_MEMORYMODEL
 628         select ARCH_REQUIRE_GPIOLIB
 629         select CLKDEV_LOOKUP
 630         select CPU_ARM926T
 631         select GENERIC_ALLOCATOR
 632         select GENERIC_CLOCKEVENTS
 633         select GENERIC_IRQ_CHIP
 634         select HAVE_IDE
 635         select USE_OF
 636         select ZONE_DMA
 637         help
 638           Support for TI's DaVinci platform.
 639
 640 config ARCH_OMAP1
 641         bool "TI OMAP1"
 642         depends on MMU
 643         select ARCH_HAS_HOLES_MEMORYMODEL
 644         select ARCH_OMAP
 645         select ARCH_REQUIRE_GPIOLIB
 646         select CLKDEV_LOOKUP
 647         select CLKSRC_MMIO
 648         select GENERIC_CLOCKEVENTS
 649         select GENERIC_IRQ_CHIP
 650         select HAVE_IDE
 651         select IRQ_DOMAIN
 652         select MULTI_IRQ_HANDLER
 653         select NEED_MACH_IO_H if PCCARD
 654         select NEED_MACH_MEMORY_H
 655         select SPARSE_IRQ
 656         help
 657           Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
 658
 659 endchoice
 660
 661 menu "Multiple platform selection"
 662         depends on ARCH_MULTIPLATFORM
 663
 664 comment "CPU Core family selection"
 665
 666 config ARCH_MULTI_V4
 667         bool "ARMv4 based platforms (FA526)"
 668         depends on !ARCH_MULTI_V6_V7
 669         select ARCH_MULTI_V4_V5
 670         select CPU_FA526
 671
 672 config ARCH_MULTI_V4T
 673         bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
 674         depends on !ARCH_MULTI_V6_V7
 675         select ARCH_MULTI_V4_V5
 676         select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
 677                 CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
 678                 CPU_ARM925T || CPU_ARM940T)
 679
 680 config ARCH_MULTI_V5
 681         bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
 682         depends on !ARCH_MULTI_V6_V7
 683         select ARCH_MULTI_V4_V5
 684         select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
 685                 CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
 686                 CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
 687
 688 config ARCH_MULTI_V4_V5
 689         bool
 690
 691 config ARCH_MULTI_V6
 692         bool "ARMv6 based platforms (ARM11)"
 693         select ARCH_MULTI_V6_V7
 694         select CPU_V6K
 695
 696 config ARCH_MULTI_V7
 697         bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 698         default y
 699         select ARCH_MULTI_V6_V7
 700         select CPU_V7
 701         select HAVE_SMP
 702
 703 config ARCH_MULTI_V6_V7
 704         bool
 705         select MIGHT_HAVE_CACHE_L2X0
 706
 707 config ARCH_MULTI_CPU_AUTO
 708         def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
 709         select ARCH_MULTI_V5
 710
 711 endmenu
 712
 713 config ARCH_VIRT
 714         bool "Dummy Virtual Machine"
 715         depends on ARCH_MULTI_V7
 716         select ARM_AMBA
 717         select ARM_GIC
 718         select ARM_GIC_V2M if PCI_MSI
 719         select ARM_GIC_V3
 720         select ARM_PSCI
 721         select HAVE_ARM_ARCH_TIMER
 722
 723 #
 724 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 725 # Kconfigs may be included either alphabetically (according to the
 726 # plat- suffix) or along side the corresponding mach-* source.
 727 #
 728 source "arch/arm/mach-mvebu/Kconfig"
 729
 730 source "arch/arm/mach-alpine/Kconfig"
 731
 732 source "arch/arm/mach-artpec/Kconfig"
 733
 734 source "arch/arm/mach-asm9260/Kconfig"
 735
 736 source "arch/arm/mach-at91/Kconfig"
 737
 738 source "arch/arm/mach-axxia/Kconfig"
 739
 740 source "arch/arm/mach-bcm/Kconfig"
 741
 742 source "arch/arm/mach-berlin/Kconfig"
 743
 744 source "arch/arm/mach-clps711x/Kconfig"
 745
 746 source "arch/arm/mach-cns3xxx/Kconfig"
 747
 748 source "arch/arm/mach-davinci/Kconfig"
 749
 750 source "arch/arm/mach-digicolor/Kconfig"
 751
 752 source "arch/arm/mach-dove/Kconfig"
 753
 754 source "arch/arm/mach-ep93xx/Kconfig"
 755
 756 source "arch/arm/mach-footbridge/Kconfig"
 757
 758 source "arch/arm/mach-gemini/Kconfig"
 759
 760 source "arch/arm/mach-highbank/Kconfig"
 761
 762 source "arch/arm/mach-hisi/Kconfig"
 763
 764 source "arch/arm/mach-integrator/Kconfig"
 765
 766 source "arch/arm/mach-iop32x/Kconfig"
 767
 768 source "arch/arm/mach-iop33x/Kconfig"
 769
 770 source "arch/arm/mach-iop13xx/Kconfig"
 771
 772 source "arch/arm/mach-ixp4xx/Kconfig"
 773
 774 source "arch/arm/mach-keystone/Kconfig"
 775
 776 source "arch/arm/mach-ks8695/Kconfig"
 777
 778 source "arch/arm/mach-meson/Kconfig"
 779
 780 source "arch/arm/mach-moxart/Kconfig"
 781
 782 source "arch/arm/mach-aspeed/Kconfig"
 783
 784 source "arch/arm/mach-mv78xx0/Kconfig"
 785
 786 source "arch/arm/mach-imx/Kconfig"
 787
 788 source "arch/arm/mach-mediatek/Kconfig"
 789
 790 source "arch/arm/mach-mxs/Kconfig"
 791
 792 source "arch/arm/mach-netx/Kconfig"
 793
 794 source "arch/arm/mach-nomadik/Kconfig"
 795
 796 source "arch/arm/mach-nspire/Kconfig"
 797
 798 source "arch/arm/plat-omap/Kconfig"
 799
 800 source "arch/arm/mach-omap1/Kconfig"
 801
 802 source "arch/arm/mach-omap2/Kconfig"
 803
 804 source "arch/arm/mach-orion5x/Kconfig"
 805
 806 source "arch/arm/mach-picoxcell/Kconfig"
 807
 808 source "arch/arm/mach-pxa/Kconfig"
 809 source "arch/arm/plat-pxa/Kconfig"
 810
 811 source "arch/arm/mach-mmp/Kconfig"
 812
 813 source "arch/arm/mach-oxnas/Kconfig"
 814
 815 source "arch/arm/mach-qcom/Kconfig"
 816
 817 source "arch/arm/mach-realview/Kconfig"
 818
 819 source "arch/arm/mach-rockchip/Kconfig"
 820
 821 source "arch/arm/mach-sa1100/Kconfig"
 822
 823 source "arch/arm/mach-socfpga/Kconfig"
 824
 825 source "arch/arm/mach-spear/Kconfig"
 826
 827 source "arch/arm/mach-sti/Kconfig"
 828
 829 source "arch/arm/mach-s3c24xx/Kconfig"
 830
 831 source "arch/arm/mach-s3c64xx/Kconfig"
 832
 833 source "arch/arm/mach-s5pv210/Kconfig"
 834
 835 source "arch/arm/mach-exynos/Kconfig"
 836 source "arch/arm/plat-samsung/Kconfig"
 837
 838 source "arch/arm/mach-shmobile/Kconfig"
 839
 840 source "arch/arm/mach-sunxi/Kconfig"
 841
 842 source "arch/arm/mach-prima2/Kconfig"
 843
 844 source "arch/arm/mach-tango/Kconfig"
 845
 846 source "arch/arm/mach-tegra/Kconfig"
 847
 848 source "arch/arm/mach-u300/Kconfig"
 849
 850 source "arch/arm/mach-uniphier/Kconfig"
 851
 852 source "arch/arm/mach-ux500/Kconfig"
 853
 854 source "arch/arm/mach-versatile/Kconfig"
 855
 856 source "arch/arm/mach-vexpress/Kconfig"
 857 source "arch/arm/plat-versatile/Kconfig"
 858
 859 source "arch/arm/mach-vt8500/Kconfig"
 860
 861 source "arch/arm/mach-w90x900/Kconfig"
 862
 863 source "arch/arm/mach-zx/Kconfig"
 864
 865 source "arch/arm/mach-zynq/Kconfig"
 866
 867 # ARMv7-M architecture
 868 config ARCH_EFM32
 869         bool "Energy Micro efm32"
 870         depends on ARM_SINGLE_ARMV7M
 871         select ARCH_REQUIRE_GPIOLIB
 872         help
 873           Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
 874           processors.
 875
 876 config ARCH_LPC18XX
 877         bool "NXP LPC18xx/LPC43xx"
 878         depends on ARM_SINGLE_ARMV7M
 879         select ARCH_HAS_RESET_CONTROLLER
 880         select ARM_AMBA
 881         select CLKSRC_LPC32XX
 882         select PINCTRL
 883         help
 884           Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
 885           high performance microcontrollers.
 886
 887 config ARCH_STM32
 888         bool "STMicrolectronics STM32"
 889         depends on ARM_SINGLE_ARMV7M
 890         select ARCH_HAS_RESET_CONTROLLER
 891         select ARMV7M_SYSTICK
 892         select CLKSRC_STM32
 893         select PINCTRL
 894         select RESET_CONTROLLER
 895         help
 896           Support for STMicroelectronics STM32 processors.
 897
 898 config MACH_STM32F429
 899         bool "STMicrolectronics STM32F429"
 900         depends on ARCH_STM32
 901         default y
 902
 903 config ARCH_MPS2
 904         bool "ARM MPS2 paltform"
 905         depends on ARM_SINGLE_ARMV7M
 906         select ARM_AMBA
 907         select CLKSRC_MPS2
 908         help
 909           Support for Cortex-M Prototyping System (or V2M-MPS2) which comes
 910           with a range of available cores like Cortex-M3/M4/M7.
 911
 912           Please, note that depends which Application Note is used memory map
 913           for the platform may vary, so adjustment of RAM base might be needed.
 914
 915 # Definitions to make life easier
 916 config ARCH_ACORN
 917         bool
 918
 919 config PLAT_IOP
 920         bool
 921         select GENERIC_CLOCKEVENTS
 922
 923 config PLAT_ORION
 924         bool
 925         select CLKSRC_MMIO
 926         select COMMON_CLK
 927         select GENERIC_IRQ_CHIP
 928         select IRQ_DOMAIN
 929
 930 config PLAT_ORION_LEGACY
 931         bool
 932         select PLAT_ORION
 933
 934 config PLAT_PXA
 935         bool
 936
 937 config PLAT_VERSATILE
 938         bool
 939
 940 source "arch/arm/firmware/Kconfig"
 941
 942 source arch/arm/mm/Kconfig
 943
 944 config IWMMXT
 945         bool "Enable iWMMXt support"
 946         depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
 947         default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
 948         help
 949           Enable support for iWMMXt context switching at run time if
 950           running on a CPU that supports it.
 951
 952 config MULTI_IRQ_HANDLER
 953         bool
 954         help
 955           Allow each machine to specify it's own IRQ handler at run time.
 956
 957 if !MMU
 958 source "arch/arm/Kconfig-nommu"
 959 endif
 960
 961 config PJ4B_ERRATA_4742
 962         bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
 963         depends on CPU_PJ4B && MACH_ARMADA_370
 964         default y
 965         help
 966           When coming out of either a Wait for Interrupt (WFI) or a Wait for
 967           Event (WFE) IDLE states, a specific timing sensitivity exists between
 968           the retiring WFI/WFE instructions and the newly issued subsequent
 969           instructions.  This sensitivity can result in a CPU hang scenario.
 970           Workaround:
 971           The software must insert either a Data Synchronization Barrier (DSB)
 972           or Data Memory Barrier (DMB) command immediately after the WFI/WFE
 973           instruction
 974
 975 config ARM_ERRATA_326103
 976         bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
 977         depends on CPU_V6
 978         help
 979           Executing a SWP instruction to read-only memory does not set bit 11
 980           of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
 981           treat the access as a read, preventing a COW from occurring and
 982           causing the faulting task to livelock.
 983
 984 config ARM_ERRATA_411920
 985         bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 986         depends on CPU_V6 || CPU_V6K
 987         help
 988           Invalidation of the Instruction Cache operation can
 989           fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
 990           It does not affect the MPCore. This option enables the ARM Ltd.
 991           recommended workaround.
 992
 993 config ARM_ERRATA_430973
 994         bool "ARM errata: Stale prediction on replaced interworking branch"
 995         depends on CPU_V7
 996         help
 997           This option enables the workaround for the 430973 Cortex-A8
 998           r1p* erratum. If a code sequence containing an ARM/Thumb
 999           interworking branch is replaced with another code sequence at the
1000           same virtual address, whether due to self-modifying code or virtual
1001           to physical address re-mapping, Cortex-A8 does not recover from the
1002           stale interworking branch prediction. This results in Cortex-A8
1003           executing the new code sequence in the incorrect ARM or Thumb state.
1004           The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
1005           and also flushes the branch target cache at every context switch.
1006           Note that setting specific bits in the ACTLR register may not be
1007           available in non-secure mode.
1008
1009 config ARM_ERRATA_458693
1010         bool "ARM errata: Processor deadlock when a false hazard is created"
1011         depends on CPU_V7
1012         depends on !ARCH_MULTIPLATFORM
1013         help
1014           This option enables the workaround for the 458693 Cortex-A8 (r2p0)
1015           erratum. For very specific sequences of memory operations, it is
1016           possible for a hazard condition intended for a cache line to instead
1017           be incorrectly associated with a different cache line. This false
1018           hazard might then cause a processor deadlock. The workaround enables
1019           the L1 caching of the NEON accesses and disables the PLD instruction
1020           in the ACTLR register. Note that setting specific bits in the ACTLR
1021           register may not be available in non-secure mode.
1022
1023 config ARM_ERRATA_460075
1024         bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
1025         depends on CPU_V7
1026         depends on !ARCH_MULTIPLATFORM
1027         help
1028           This option enables the workaround for the 460075 Cortex-A8 (r2p0)
1029           erratum. Any asynchronous access to the L2 cache may encounter a
1030           situation in which recent store transactions to the L2 cache are lost
1031           and overwritten with stale memory contents from external memory. The
1032           workaround disables the write-allocate mode for the L2 cache via the
1033           ACTLR register. Note that setting specific bits in the ACTLR register
1034           may not be available in non-secure mode.
1035
1036 config ARM_ERRATA_742230
1037         bool "ARM errata: DMB operation may be faulty"
1038         depends on CPU_V7 && SMP
1039         depends on !ARCH_MULTIPLATFORM
1040         help
1041           This option enables the workaround for the 742230 Cortex-A9
1042           (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
1043           between two write operations may not ensure the correct visibility
1044           ordering of the two writes. This workaround sets a specific bit in
1045           the diagnostic register of the Cortex-A9 which causes the DMB
1046           instruction to behave as a DSB, ensuring the correct behaviour of
1047           the two writes.
1048
1049 config ARM_ERRATA_742231
1050         bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
1051         depends on CPU_V7 && SMP
1052         depends on !ARCH_MULTIPLATFORM
1053         help
1054           This option enables the workaround for the 742231 Cortex-A9
1055           (r2p0..r2p2) erratum. Under certain conditions, specific to the
1056           Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
1057           accessing some data located in the same cache line, may get corrupted
1058           data due to bad handling of the address hazard when the line gets
1059           replaced from one of the CPUs at the same time as another CPU is
1060           accessing it. This workaround sets specific bits in the diagnostic
1061           register of the Cortex-A9 which reduces the linefill issuing
1062           capabilities of the processor.
1063
1064 config ARM_ERRATA_643719
1065         bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
1066         depends on CPU_V7 && SMP
1067         default y
1068         help
1069           This option enables the workaround for the 643719 Cortex-A9 (prior to
1070           r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
1071           register returns zero when it should return one. The workaround
1072           corrects this value, ensuring cache maintenance operations which use
1073           it behave as intended and avoiding data corruption.
1074
1075 config ARM_ERRATA_720789
1076         bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
1077         depends on CPU_V7
1078         help
1079           This option enables the workaround for the 720789 Cortex-A9 (prior to
1080           r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
1081           broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
1082           As a consequence of this erratum, some TLB entries which should be
1083           invalidated are not, resulting in an incoherency in the system page
1084           tables. The workaround changes the TLB flushing routines to invalidate
1085           entries regardless of the ASID.
1086
1087 config ARM_ERRATA_743622
1088         bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
1089         depends on CPU_V7
1090         depends on !ARCH_MULTIPLATFORM
1091         help
1092           This option enables the workaround for the 743622 Cortex-A9
1093           (r2p*) erratum. Under very rare conditions, a faulty
1094           optimisation in the Cortex-A9 Store Buffer may lead to data
1095           corruption. This workaround sets a specific bit in the diagnostic
1096           register of the Cortex-A9 which disables the Store Buffer
1097           optimisation, preventing the defect from occurring. This has no
1098           visible impact on the overall performance or power consumption of the
1099           processor.
1100
1101 config ARM_ERRATA_751472
1102         bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
1103         depends on CPU_V7
1104         depends on !ARCH_MULTIPLATFORM
1105         help
1106           This option enables the workaround for the 751472 Cortex-A9 (prior
1107           to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
1108           completion of a following broadcasted operation if the second
1109           operation is received by a CPU before the ICIALLUIS has completed,
1110           potentially leading to corrupted entries in the cache or TLB.
1111
1112 config ARM_ERRATA_754322
1113         bool "ARM errata: possible faulty MMU translations following an ASID switch"
1114         depends on CPU_V7
1115         help
1116           This option enables the workaround for the 754322 Cortex-A9 (r2p*,
1117           r3p*) erratum. A speculative memory access may cause a page table walk
1118           which starts prior to an ASID switch but completes afterwards. This
1119           can populate the micro-TLB with a stale entry which may be hit with
1120           the new ASID. This workaround places two dsb instructions in the mm
1121           switching code so that no page table walks can cross the ASID switch.
1122
1123 config ARM_ERRATA_754327
1124         bool "ARM errata: no automatic Store Buffer drain"
1125         depends on CPU_V7 && SMP
1126         help
1127           This option enables the workaround for the 754327 Cortex-A9 (prior to
1128           r2p0) erratum. The Store Buffer does not have any automatic draining
1129           mechanism and therefore a livelock may occur if an external agent
1130           continuously polls a memory location waiting to observe an update.
1131           This workaround defines cpu_relax() as smp_mb(), preventing correctly
1132           written polling loops from denying visibility of updates to memory.
1133
1134 config ARM_ERRATA_364296
1135         bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
1136         depends on CPU_V6
1137         help
1138           This options enables the workaround for the 364296 ARM1136
1139           r0p2 erratum (possible cache data corruption with
1140           hit-under-miss enabled). It sets the undocumented bit 31 in
1141           the auxiliary control register and the FI bit in the control
1142           register, thus disabling hit-under-miss without putting the
1143           processor into full low interrupt latency mode. ARM11MPCore
1144           is not affected.
1145
1146 config ARM_ERRATA_764369
1147         bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
1148         depends on CPU_V7 && SMP
1149         help
1150           This option enables the workaround for erratum 764369
1151           affecting Cortex-A9 MPCore with two or more processors (all
1152           current revisions). Under certain timing circumstances, a data
1153           cache line maintenance operation by MVA targeting an Inner
1154           Shareable memory region may fail to proceed up to either the
1155           Point of Coherency or to the Point of Unification of the
1156           system. This workaround adds a DSB instruction before the
1157           relevant cache maintenance functions and sets a specific bit
1158           in the diagnostic control register of the SCU.
1159
1160 config ARM_ERRATA_775420
1161        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
1162        depends on CPU_V7
1163        help
1164          This option enables the workaround for the 775420 Cortex-A9 (r2p2,
1165          r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
1166          operation aborts with MMU exception, it might cause the processor
1167          to deadlock. This workaround puts DSB before executing ISB if
1168          an abort may occur on cache maintenance.
1169
1170 config ARM_ERRATA_798181
1171         bool "ARM errata: TLBI/DSB failure on Cortex-A15"
1172         depends on CPU_V7 && SMP
1173         help
1174           On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
1175           adequately shooting down all use of the old entries. This
1176           option enables the Linux kernel workaround for this erratum
1177           which sends an IPI to the CPUs that are running the same ASID
1178           as the one being invalidated.
1179
1180 config ARM_ERRATA_773022
1181         bool "ARM errata: incorrect instructions may be executed from loop buffer"
1182         depends on CPU_V7
1183         help
1184           This option enables the workaround for the 773022 Cortex-A15
1185           (up to r0p4) erratum. In certain rare sequences of code, the
1186           loop buffer may deliver incorrect instructions. This
1187           workaround disables the loop buffer to avoid the erratum.
1188
1189 endmenu
1190
1191 source "arch/arm/common/Kconfig"
1192
1193 menu "Bus support"
1194
1195 config ISA
1196         bool
1197         help
1198           Find out whether you have ISA slots on your motherboard.  ISA is the
1199           name of a bus system, i.e. the way the CPU talks to the other stuff
1200           inside your box.  Other bus systems are PCI, EISA, MicroChannel
1201           (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
1202           newer boards don't support it.  If you have ISA, say Y, otherwise N.
1203
1204 # Select ISA DMA controller support
1205 config ISA_DMA
1206         bool
1207         select ISA_DMA_API
1208
1209 # Select ISA DMA interface
1210 config ISA_DMA_API
1211         bool
1212
1213 config PCI
1214         bool "PCI support" if MIGHT_HAVE_PCI
1215         help
1216           Find out whether you have a PCI motherboard. PCI is the name of a
1217           bus system, i.e. the way the CPU talks to the other stuff inside
1218           your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1219           VESA. If you have PCI, say Y, otherwise N.
1220
1221 config PCI_DOMAINS
1222         bool
1223         depends on PCI
1224
1225 config PCI_DOMAINS_GENERIC
1226         def_bool PCI_DOMAINS
1227
1228 config PCI_NANOENGINE
1229         bool "BSE nanoEngine PCI support"
1230         depends on SA1100_NANOENGINE
1231         help
1232           Enable PCI on the BSE nanoEngine board.
1233
1234 config PCI_SYSCALL
1235         def_bool PCI
1236
1237 config PCI_HOST_ITE8152
1238         bool
1239         depends on PCI && MACH_ARMCORE
1240         default y
1241         select DMABOUNCE
1242
1243 source "drivers/pci/Kconfig"
1244
1245 source "drivers/pcmcia/Kconfig"
1246
1247 endmenu
1248
1249 menu "Kernel Features"
1250
1251 config HAVE_SMP
1252         bool
1253         help
1254           This option should be selected by machines which have an SMP-
1255           capable CPU.
1256
1257           The only effect of this option is to make the SMP-related
1258           options available to the user for configuration.
1259
1260 config SMP
1261         bool "Symmetric Multi-Processing"
1262         depends on CPU_V6K || CPU_V7
1263         depends on GENERIC_CLOCKEVENTS
1264         depends on HAVE_SMP
1265         depends on MMU || ARM_MPU
1266         select IRQ_WORK
1267         help
1268           This enables support for systems with more than one CPU. If you have
1269           a system with only one CPU, say N. If you have a system with more
1270           than one CPU, say Y.
1271
1272           If you say N here, the kernel will run on uni- and multiprocessor
1273           machines, but will use only one CPU of a multiprocessor machine. If
1274           you say Y here, the kernel will run on many, but not all,
1275           uniprocessor machines. On a uniprocessor machine, the kernel
1276           will run faster if you say N here.
1277
1278           See also <file:Documentation/x86/i386/IO-APIC.txt>,
1279           <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
1280           <http://tldp.org/HOWTO/SMP-HOWTO.html>.
1281
1282           If you don't know what to do here, say N.
1283
1284 config SMP_ON_UP
1285         bool "Allow booting SMP kernel on uniprocessor systems"
1286         depends on SMP && !XIP_KERNEL && MMU
1287         default y
1288         help
1289           SMP kernels contain instructions which fail on non-SMP processors.
1290           Enabling this option allows the kernel to modify itself to make
1291           these instructions safe.  Disabling it allows about 1K of space
1292           savings.
1293
1294           If you don't know what to do here, say Y.
1295
1296 config ARM_CPU_TOPOLOGY
1297         bool "Support cpu topology definition"
1298         depends on SMP && CPU_V7
1299         default y
1300         help
1301           Support ARM cpu topology definition. The MPIDR register defines
1302           affinity between processors which is then used to describe the cpu
1303           topology of an ARM System.
1304
1305 config SCHED_MC
1306         bool "Multi-core scheduler support"
1307         depends on ARM_CPU_TOPOLOGY
1308         help
1309           Multi-core scheduler support improves the CPU scheduler's decision
1310           making when dealing with multi-core CPU chips at a cost of slightly
1311           increased overhead in some places. If unsure say N here.
1312
1313 config SCHED_SMT
1314         bool "SMT scheduler support"
1315         depends on ARM_CPU_TOPOLOGY
1316         help
1317           Improves the CPU scheduler's decision making when dealing with
1318           MultiThreading at a cost of slightly increased overhead in some
1319           places. If unsure say N here.
1320
1321 config HAVE_ARM_SCU
1322         bool
1323         help
1324           This option enables support for the ARM system coherency unit
1325
1326 config HAVE_ARM_ARCH_TIMER
1327         bool "Architected timer support"
1328         depends on CPU_V7
1329         select ARM_ARCH_TIMER
1330         select GENERIC_CLOCKEVENTS
1331         help
1332           This option enables support for the ARM architected timer
1333
1334 config HAVE_ARM_TWD
1335         bool
1336         select CLKSRC_OF if OF
1337         help
1338           This options enables support for the ARM timer and watchdog unit
1339
1340 config MCPM
1341         bool "Multi-Cluster Power Management"
1342         depends on CPU_V7 && SMP
1343         help
1344           This option provides the common power management infrastructure
1345           for (multi-)cluster based systems, such as big.LITTLE based
1346           systems.
1347
1348 config MCPM_QUAD_CLUSTER
1349         bool
1350         depends on MCPM
1351         help
1352           To avoid wasting resources unnecessarily, MCPM only supports up
1353           to 2 clusters by default.
1354           Platforms with 3 or 4 clusters that use MCPM must select this
1355           option to allow the additional clusters to be managed.
1356
1357 config BIG_LITTLE
1358         bool "big.LITTLE support (Experimental)"
1359         depends on CPU_V7 && SMP
1360         select MCPM
1361         help
1362           This option enables support selections for the big.LITTLE
1363           system architecture.
1364
1365 config BL_SWITCHER
1366         bool "big.LITTLE switcher support"
1367         depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
1368         select CPU_PM
1369         help
1370           The big.LITTLE "switcher" provides the core functionality to
1371           transparently handle transition between a cluster of A15's
1372           and a cluster of A7's in a big.LITTLE system.
1373
1374 config BL_SWITCHER_DUMMY_IF
1375         tristate "Simple big.LITTLE switcher user interface"
1376         depends on BL_SWITCHER && DEBUG_KERNEL
1377         help
1378           This is a simple and dummy char dev interface to control
1379           the big.LITTLE switcher core code.  It is meant for
1380           debugging purposes only.
1381
1382 choice
1383         prompt "Memory split"
1384         depends on MMU
1385         default VMSPLIT_3G
1386         help
1387           Select the desired split between kernel and user memory.
1388
1389           If you are not absolutely sure what you are doing, leave this
1390           option alone!
1391
1392         config VMSPLIT_3G
1393                 bool "3G/1G user/kernel split"
1394         config VMSPLIT_3G_OPT
1395                 bool "3G/1G user/kernel split (for full 1G low memory)"
1396         config VMSPLIT_2G
1397                 bool "2G/2G user/kernel split"
1398         config VMSPLIT_1G
1399                 bool "1G/3G user/kernel split"
1400 endchoice
1401
1402 config PAGE_OFFSET
1403         hex
1404         default PHYS_OFFSET if !MMU
1405         default 0x40000000 if VMSPLIT_1G
1406         default 0x80000000 if VMSPLIT_2G
1407         default 0xB0000000 if VMSPLIT_3G_OPT
1408         default 0xC0000000
1409
1410 config NR_CPUS
1411         int "Maximum number of CPUs (2-32)"
1412         range 2 32
1413         depends on SMP
1414         default "4"
1415
1416 config HOTPLUG_CPU
1417         bool "Support for hot-pluggable CPUs"
1418         depends on SMP
1419         help
1420           Say Y here to experiment with turning CPUs off and on.  CPUs
1421           can be controlled through /sys/devices/system/cpu.
1422
1423 config ARM_PSCI
1424         bool "Support for the ARM Power State Coordination Interface (PSCI)"
1425         depends on HAVE_ARM_SMCCC
1426         select ARM_PSCI_FW
1427         help
1428           Say Y here if you want Linux to communicate with system firmware
1429           implementing the PSCI specification for CPU-centric power
1430           management operations described in ARM document number ARM DEN
1431           0022A ("Power State Coordination Interface System Software on
1432           ARM processors").
1433
1434 # The GPIO number here must be sorted by descending number. In case of
1435 # a multiplatform kernel, we just want the highest value required by the
1436 # selected platforms.
1437 config ARCH_NR_GPIO
1438         int
1439         default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
1440                 ARCH_ZYNQ
1441         default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
1442                 SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
1443         default 416 if ARCH_SUNXI
1444         default 392 if ARCH_U8500
1445         default 352 if ARCH_VT8500
1446         default 288 if ARCH_ROCKCHIP
1447         default 264 if MACH_H4700
1448         default 0
1449         help
1450           Maximum number of GPIOs in the system.
1451
1452           If unsure, leave the default value.
1453
1454 source kernel/Kconfig.preempt
1455
1456 config HZ_FIXED
1457         int
1458         default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
1459                 ARCH_S5PV210 || ARCH_EXYNOS4
1460         default 128 if SOC_AT91RM9200
1461         default 0
1462
1463 choice
1464         depends on HZ_FIXED = 0
1465         prompt "Timer frequency"
1466
1467 config HZ_100
1468         bool "100 Hz"
1469
1470 config HZ_200
1471         bool "200 Hz"
1472
1473 config HZ_250
1474         bool "250 Hz"
1475
1476 config HZ_300
1477         bool "300 Hz"
1478
1479 config HZ_500
1480         bool "500 Hz"
1481
1482 config HZ_1000
1483         bool "1000 Hz"
1484
1485 endchoice
1486
1487 config HZ
1488         int
1489         default HZ_FIXED if HZ_FIXED != 0
1490         default 100 if HZ_100
1491         default 200 if HZ_200
1492         default 250 if HZ_250
1493         default 300 if HZ_300
1494         default 500 if HZ_500
1495         default 1000
1496
1497 config SCHED_HRTICK
1498         def_bool HIGH_RES_TIMERS
1499
1500 config THUMB2_KERNEL
1501         bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
1502         depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
1503         default y if CPU_THUMBONLY
1504         select AEABI
1505         select ARM_ASM_UNIFIED
1506         select ARM_UNWIND
1507         help
1508           By enabling this option, the kernel will be compiled in
1509           Thumb-2 mode. A compiler/assembler that understand the unified
1510           ARM-Thumb syntax is needed.
1511
1512           If unsure, say N.
1513
1514 config THUMB2_AVOID_R_ARM_THM_JUMP11
1515         bool "Work around buggy Thumb-2 short branch relocations in gas"
1516         depends on THUMB2_KERNEL && MODULES
1517         default y
1518         help
1519           Various binutils versions can resolve Thumb-2 branches to
1520           locally-defined, preemptible global symbols as short-range "b.n"
1521           branch instructions.
1522
1523           This is a problem, because there's no guarantee the final
1524           destination of the symbol, or any candidate locations for a
1525           trampoline, are within range of the branch.  For this reason, the
1526           kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
1527           relocation in modules at all, and it makes little sense to add
1528           support.
1529
1530           The symptom is that the kernel fails with an "unsupported
1531           relocation" error when loading some modules.
1532
1533           Until fixed tools are available, passing
1534           -fno-optimize-sibling-calls to gcc should prevent gcc generating
1535           code which hits this problem, at the cost of a bit of extra runtime
1536           stack usage in some cases.
1537
1538           The problem is described in more detail at:
1539               https://bugs.launchpad.net/binutils-linaro/+bug/725126
1540
1541           Only Thumb-2 kernels are affected.
1542
1543           Unless you are sure your tools don't have this problem, say Y.
1544
1545 config ARM_ASM_UNIFIED
1546         bool
1547
1548 config ARM_PATCH_IDIV
1549         bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
1550         depends on CPU_32v7 && !XIP_KERNEL
1551         default y
1552         help
1553           The ARM compiler inserts calls to __aeabi_idiv() and
1554           __aeabi_uidiv() when it needs to perform division on signed
1555           and unsigned integers. Some v7 CPUs have support for the sdiv
1556           and udiv instructions that can be used to implement those
1557           functions.
1558
1559           Enabling this option allows the kernel to modify itself to
1560           replace the first two instructions of these library functions
1561           with the sdiv or udiv plus "bx lr" instructions when the CPU
1562           it is running on supports them. Typically this will be faster
1563           and less power intensive than running the original library
1564           code to do integer division.
1565
1566 config AEABI
1567         bool "Use the ARM EABI to compile the kernel"
1568         help
1569           This option allows for the kernel to be compiled using the latest
1570           ARM ABI (aka EABI).  This is only useful if you are using a user
1571           space environment that is also compiled with EABI.
1572
1573           Since there are major incompatibilities between the legacy ABI and
1574           EABI, especially with regard to structure member alignment, this
1575           option also changes the kernel syscall calling convention to
1576           disambiguate both ABIs and allow for backward compatibility support
1577           (selected with CONFIG_OABI_COMPAT).
1578
1579           To use this you need GCC version 4.0.0 or later.
1580
1581 config OABI_COMPAT
1582         bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
1583         depends on AEABI && !THUMB2_KERNEL
1584         help
1585           This option preserves the old syscall interface along with the
1586           new (ARM EABI) one. It also provides a compatibility layer to
1587           intercept syscalls that have structure arguments which layout
1588           in memory differs between the legacy ABI and the new ARM EABI
1589           (only for non "thumb" binaries). This option adds a tiny
1590           overhead to all syscalls and produces a slightly larger kernel.
1591
1592           The seccomp filter system will not be available when this is
1593           selected, since there is no way yet to sensibly distinguish
1594           between calling conventions during filtering.
1595
1596           If you know you'll be using only pure EABI user space then you
1597           can say N here. If this option is not selected and you attempt
1598           to execute a legacy ABI binary then the result will be
1599           UNPREDICTABLE (in fact it can be predicted that it won't work
1600           at all). If in doubt say N.
1601
1602 config ARCH_HAS_HOLES_MEMORYMODEL
1603         bool
1604
1605 config ARCH_SPARSEMEM_ENABLE
1606         bool
1607
1608 config ARCH_SPARSEMEM_DEFAULT
1609         def_bool ARCH_SPARSEMEM_ENABLE
1610
1611 config ARCH_SELECT_MEMORY_MODEL
1612         def_bool ARCH_SPARSEMEM_ENABLE
1613
1614 config HAVE_ARCH_PFN_VALID
1615         def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
1616
1617 config HAVE_GENERIC_RCU_GUP
1618         def_bool y
1619         depends on ARM_LPAE
1620
1621 config HIGHMEM
1622         bool "High Memory Support"
1623         depends on MMU
1624         help
1625           The address space of ARM processors is only 4 Gigabytes large
1626           and it has to accommodate user address space, kernel address
1627           space as well as some memory mapped IO. That means that, if you
1628           have a large amount of physical memory and/or IO, not all of the
1629           memory can be "permanently mapped" by the kernel. The physical
1630           memory that is not permanently mapped is called "high memory".
1631
1632           Depending on the selected kernel/user memory split, minimum
1633           vmalloc space and actual amount of RAM, you may not need this
1634           option which should result in a slightly faster kernel.
1635
1636           If unsure, say n.
1637
1638 config HIGHPTE
1639         bool "Allocate 2nd-level pagetables from highmem" if EXPERT
1640         depends on HIGHMEM
1641         default y
1642         help
1643           The VM uses one page of physical memory for each page table.
1644           For systems with a lot of processes, this can use a lot of
1645           precious low memory, eventually leading to low memory being
1646           consumed by page tables.  Setting this option will allow
1647           user-space 2nd level page tables to reside in high memory.
1648
1649 config CPU_SW_DOMAIN_PAN
1650         bool "Enable use of CPU domains to implement privileged no-access"
1651         depends on MMU && !ARM_LPAE
1652         default y
1653         help
1654           Increase kernel security by ensuring that normal kernel accesses
1655           are unable to access userspace addresses.  This can help prevent
1656           use-after-free bugs becoming an exploitable privilege escalation
1657           by ensuring that magic values (such as LIST_POISON) will always
1658           fault when dereferenced.
1659
1660           CPUs with low-vector mappings use a best-efforts implementation.
1661           Their lower 1MB needs to remain accessible for the vectors, but
1662           the remainder of userspace will become appropriately inaccessible.
1663
1664 config HW_PERF_EVENTS
1665         def_bool y
1666         depends on ARM_PMU
1667
1668 config SYS_SUPPORTS_HUGETLBFS
1669        def_bool y
1670        depends on ARM_LPAE
1671
1672 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
1673        def_bool y
1674        depends on ARM_LPAE
1675
1676 config ARCH_WANT_GENERAL_HUGETLB
1677         def_bool y
1678
1679 config ARM_MODULE_PLTS
1680         bool "Use PLTs to allow module memory to spill over into vmalloc area"
1681         depends on MODULES
1682         help
1683           Allocate PLTs when loading modules so that jumps and calls whose
1684           targets are too far away for their relative offsets to be encoded
1685           in the instructions themselves can be bounced via veneers in the
1686           module's PLT. This allows modules to be allocated in the generic
1687           vmalloc area after the dedicated module memory area has been
1688           exhausted. The modules will use slightly more memory, but after
1689           rounding up to page size, the actual memory footprint is usually
1690           the same.
1691
1692           Say y if you are getting out of memory errors while loading modules
1693
1694 source "mm/Kconfig"
1695
1696 config FORCE_MAX_ZONEORDER
1697         int "Maximum zone order"
1698         default "12" if SOC_AM33XX
1699         default "9" if SA1111 || ARCH_EFM32
1700         default "11"
1701         help
1702           The kernel memory allocator divides physically contiguous memory
1703           blocks into "zones", where each zone is a power of two number of
1704           pages.  This option selects the largest power of two that the kernel
1705           keeps in the memory allocator.  If you need to allocate very large
1706           blocks of physically contiguous memory, then you may need to
1707           increase this value.
1708
1709           This config option is actually maximum order plus one. For example,
1710           a value of 11 means that the largest free memory block is 2^10 pages.
1711
1712 config ALIGNMENT_TRAP
1713         bool
1714         depends on CPU_CP15_MMU
1715         default y if !ARCH_EBSA110
1716         select HAVE_PROC_CPU if PROC_FS
1717         help
1718           ARM processors cannot fetch/store information which is not
1719           naturally aligned on the bus, i.e., a 4 byte fetch must start at an
1720           address divisible by 4. On 32-bit ARM processors, these non-aligned
1721           fetch/store instructions will be emulated in software if you say
1722           here, which has a severe performance impact. This is necessary for
1723           correct operation of some network protocols. With an IP-only
1724           configuration it is safe to say N, otherwise say Y.
1725
1726 config UACCESS_WITH_MEMCPY
1727         bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()"
1728         depends on MMU
1729         default y if CPU_FEROCEON
1730         help
1731           Implement faster copy_to_user and clear_user methods for CPU
1732           cores where a 8-word STM instruction give significantly higher
1733           memory write throughput than a sequence of individual 32bit stores.
1734
1735           A possible side effect is a slight increase in scheduling latency
1736           between threads sharing the same address space if they invoke
1737           such copy operations with large buffers.
1738
1739           However, if the CPU data cache is using a write-allocate mode,
1740           this option is unlikely to provide any performance gain.
1741
1742 config SECCOMP
1743         bool
1744         prompt "Enable seccomp to safely compute untrusted bytecode"
1745         ---help---
1746           This kernel feature is useful for number crunching applications
1747           that may need to compute untrusted bytecode during their
1748           execution. By using pipes or other transports made available to
1749           the process as file descriptors supporting the read/write
1750           syscalls, it's possible to isolate those applications in
1751           their own address space using seccomp. Once seccomp is
1752           enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1753           and the task is only allowed to execute a few safe syscalls
1754           defined by each seccomp mode.
1755
1756 config SWIOTLB
1757         def_bool y
1758
1759 config IOMMU_HELPER
1760         def_bool SWIOTLB
1761
1762 config PARAVIRT
1763         bool "Enable paravirtualization code"
1764         help
1765           This changes the kernel so it can modify itself when it is run
1766           under a hypervisor, potentially improving performance significantly
1767           over full virtualization.
1768
1769 config PARAVIRT_TIME_ACCOUNTING
1770         bool "Paravirtual steal time accounting"
1771         select PARAVIRT
1772         default n
1773         help
1774           Select this option to enable fine granularity task steal time
1775           accounting. Time spent executing other tasks in parallel with
1776           the current vCPU is discounted from the vCPU power. To account for
1777           that, there can be a small performance impact.
1778
1779           If in doubt, say N here.
1780
1781 config XEN_DOM0
1782         def_bool y
1783         depends on XEN
1784
1785 config XEN
1786         bool "Xen guest support on ARM"
1787         depends on ARM && AEABI && OF
1788         depends on CPU_V7 && !CPU_V6
1789         depends on !GENERIC_ATOMIC64
1790         depends on MMU
1791         select ARCH_DMA_ADDR_T_64BIT
1792         select ARM_PSCI
1793         select SWIOTLB_XEN
1794         select PARAVIRT
1795         help
1796           Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
1797
1798 endmenu
1799
1800 menu "Boot options"
1801
1802 config USE_OF
1803         bool "Flattened Device Tree support"
1804         select IRQ_DOMAIN
1805         select OF
1806         help
1807           Include support for flattened device tree machine descriptions.
1808
1809 config ATAGS
1810         bool "Support for the traditional ATAGS boot data passing" if USE_OF
1811         default y
1812         help
1813           This is the traditional way of passing data to the kernel at boot
1814           time. If you are solely relying on the flattened device tree (or
1815           the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
1816           to remove ATAGS support from your kernel binary.  If unsure,
1817           leave this to y.
1818
1819 config DEPRECATED_PARAM_STRUCT
1820         bool "Provide old way to pass kernel parameters"
1821         depends on ATAGS
1822         help
1823           This was deprecated in 2001 and announced to live on for 5 years.
1824           Some old boot loaders still use this way.
1825
1826 # Compressed boot loader in ROM.  Yes, we really want to ask about
1827 # TEXT and BSS so we preserve their values in the config files.
1828 config ZBOOT_ROM_TEXT
1829         hex "Compressed ROM boot loader base address"
1830         default "0"
1831         help
1832           The physical address at which the ROM-able zImage is to be
1833           placed in the target.  Platforms which normally make use of
1834           ROM-able zImage formats normally set this to a suitable
1835           value in their defconfig file.
1836
1837           If ZBOOT_ROM is not enabled, this has no effect.
1838
1839 config ZBOOT_ROM_BSS
1840         hex "Compressed ROM boot loader BSS address"
1841         default "0"
1842         help
1843           The base address of an area of read/write memory in the target
1844           for the ROM-able zImage which must be available while the
1845           decompressor is running. It must be large enough to hold the
1846           entire decompressed kernel plus an additional 128 KiB.
1847           Platforms which normally make use of ROM-able zImage formats
1848           normally set this to a suitable value in their defconfig file.
1849
1850           If ZBOOT_ROM is not enabled, this has no effect.
1851
1852 config ZBOOT_ROM
1853         bool "Compressed boot loader in ROM/flash"
1854         depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
1855         depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
1856         help
1857           Say Y here if you intend to execute your compressed kernel image
1858           (zImage) directly from ROM or flash.  If unsure, say N.
1859
1860 config ARM_APPENDED_DTB
1861         bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
1862         depends on OF
1863         help
1864           With this option, the boot code will look for a device tree binary
1865           (DTB) appended to zImage
1866           (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
1867
1868           This is meant as a backward compatibility convenience for those
1869           systems with a bootloader that can't be upgraded to accommodate
1870           the documented boot protocol using a device tree.
1871
1872           Beware that there is very little in terms of protection against
1873           this option being confused by leftover garbage in memory that might
1874           look like a DTB header after a reboot if no actual DTB is appended
1875           to zImage.  Do not leave this option active in a production kernel
1876           if you don't intend to always append a DTB.  Proper passing of the
1877           location into r2 of a bootloader provided DTB is always preferable
1878           to this option.
1879
1880 config ARM_ATAG_DTB_COMPAT
1881         bool "Supplement the appended DTB with traditional ATAG information"
1882         depends on ARM_APPENDED_DTB
1883         help
1884           Some old bootloaders can't be updated to a DTB capable one, yet
1885           they provide ATAGs with memory configuration, the ramdisk address,
1886           the kernel cmdline string, etc.  Such information is dynamically
1887           provided by the bootloader and can't always be stored in a static
1888           DTB.  To allow a device tree enabled kernel to be used with such
1889           bootloaders, this option allows zImage to extract the information
1890           from the ATAG list and store it at run time into the appended DTB.
1891
1892 choice
1893         prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
1894         default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1895
1896 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1897         bool "Use bootloader kernel arguments if available"
1898         help
1899           Uses the command-line options passed by the boot loader instead of
1900           the device tree bootargs property. If the boot loader doesn't provide
1901           any, the device tree bootargs property will be used.
1902
1903 config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
1904         bool "Extend with bootloader kernel arguments"
1905         help
1906           The command-line arguments provided by the boot loader will be
1907           appended to the the device tree bootargs property.
1908
1909 endchoice
1910
1911 config CMDLINE
1912         string "Default kernel command string"
1913         default ""
1914         help
1915           On some architectures (EBSA110 and CATS), there is currently no way
1916           for the boot loader to pass arguments to the kernel. For these
1917           architectures, you should supply some command-line options at build
1918           time by entering them here. As a minimum, you should specify the
1919           memory size and the root device (e.g., mem=64M root=/dev/nfs).
1920
1921 choice
1922         prompt "Kernel command line type" if CMDLINE != ""
1923         default CMDLINE_FROM_BOOTLOADER
1924         depends on ATAGS
1925
1926 config CMDLINE_FROM_BOOTLOADER
1927         bool "Use bootloader kernel arguments if available"
1928         help
1929           Uses the command-line options passed by the boot loader. If
1930           the boot loader doesn't provide any, the default kernel command
1931           string provided in CMDLINE will be used.
1932
1933 config CMDLINE_EXTEND
1934         bool "Extend bootloader kernel arguments"
1935         help
1936           The command-line arguments provided by the boot loader will be
1937           appended to the default kernel command string.
1938
1939 config CMDLINE_FORCE
1940         bool "Always use the default kernel command string"
1941         help
1942           Always use the default kernel command string, even if the boot
1943           loader passes other arguments to the kernel.
1944           This is useful if you cannot or don't want to change the
1945           command-line options your boot loader passes to the kernel.
1946 endchoice
1947
1948 config XIP_KERNEL
1949         bool "Kernel Execute-In-Place from ROM"
1950         depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
1951         help
1952           Execute-In-Place allows the kernel to run from non-volatile storage
1953           directly addressable by the CPU, such as NOR flash. This saves RAM
1954           space since the text section of the kernel is not loaded from flash
1955           to RAM.  Read-write sections, such as the data section and stack,
1956           are still copied to RAM.  The XIP kernel is not compressed since
1957           it has to run directly from flash, so it will take more space to
1958           store it.  The flash address used to link the kernel object files,
1959           and for storing it, is configuration dependent. Therefore, if you
1960           say Y here, you must know the proper physical address where to
1961           store the kernel image depending on your own flash memory usage.
1962
1963           Also note that the make target becomes "make xipImage" rather than
1964           "make zImage" or "make Image".  The final kernel binary to put in
1965           ROM memory will be arch/arm/boot/xipImage.
1966
1967           If unsure, say N.
1968
1969 config XIP_PHYS_ADDR
1970         hex "XIP Kernel Physical Location"
1971         depends on XIP_KERNEL
1972         default "0x00080000"
1973         help
1974           This is the physical address in your flash memory the kernel will
1975           be linked for and stored to.  This address is dependent on your
1976           own flash usage.
1977
1978 config KEXEC
1979         bool "Kexec system call (EXPERIMENTAL)"
1980         depends on (!SMP || PM_SLEEP_SMP)
1981         depends on !CPU_V7M
1982         select KEXEC_CORE
1983         help
1984           kexec is a system call that implements the ability to shutdown your
1985           current kernel, and to start another kernel.  It is like a reboot
1986           but it is independent of the system firmware.   And like a reboot
1987           you can start any kernel with it, not just Linux.
1988
1989           It is an ongoing process to be certain the hardware in a machine
1990           is properly shutdown, so do not be surprised if this code does not
1991           initially work for you.
1992
1993 config ATAGS_PROC
1994         bool "Export atags in procfs"
1995         depends on ATAGS && KEXEC
1996         default y
1997         help
1998           Should the atags used to boot the kernel be exported in an "atags"
1999           file in procfs. Useful with kexec.
2000
2001 config CRASH_DUMP
2002         bool "Build kdump crash kernel (EXPERIMENTAL)"
2003         help
2004           Generate crash dump after being started by kexec. This should
2005           be normally only set in special crash dump kernels which are
2006           loaded in the main kernel with kexec-tools into a specially
2007           reserved region and then later executed after a crash by
2008           kdump/kexec. The crash dump kernel must be compiled to a
2009           memory address not used by the main kernel
2010
2011           For more details see Documentation/kdump/kdump.txt
2012
2013 config AUTO_ZRELADDR
2014         bool "Auto calculation of the decompressed kernel image address"
2015         help
2016           ZRELADDR is the physical address where the decompressed kernel
2017           image will be placed. If AUTO_ZRELADDR is selected, the address
2018           will be determined at run-time by masking the current IP with
2019           0xf8000000. This assumes the zImage being placed in the first 128MB
2020           from start of memory.
2021
2022 config EFI_STUB
2023         bool
2024
2025 config EFI
2026         bool "UEFI runtime support"
2027         depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
2028         select UCS2_STRING
2029         select EFI_PARAMS_FROM_FDT
2030         select EFI_STUB
2031         select EFI_ARMSTUB
2032         select EFI_RUNTIME_WRAPPERS
2033         ---help---
2034           This option provides support for runtime services provided
2035           by UEFI firmware (such as non-volatile variables, realtime
2036           clock, and platform reset). A UEFI stub is also provided to
2037           allow the kernel to be booted as an EFI application. This
2038           is only useful for kernels that may run on systems that have
2039           UEFI firmware.
2040
2041 endmenu
2042
2043 menu "CPU Power Management"
2044
2045 source "drivers/cpufreq/Kconfig"
2046
2047 source "drivers/cpuidle/Kconfig"
2048
2049 endmenu
2050
2051 menu "Floating point emulation"
2052
2053 comment "At least one emulation must be selected"
2054
2055 config FPE_NWFPE
2056         bool "NWFPE math emulation"
2057         depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
2058         ---help---
2059           Say Y to include the NWFPE floating point emulator in the kernel.
2060           This is necessary to run most binaries. Linux does not currently
2061           support floating point hardware so you need to say Y here even if
2062           your machine has an FPA or floating point co-processor podule.
2063
2064           You may say N here if you are going to load the Acorn FPEmulator
2065           early in the bootup.
2066
2067 config FPE_NWFPE_XP
2068         bool "Support extended precision"
2069         depends on FPE_NWFPE
2070         help
2071           Say Y to include 80-bit support in the kernel floating-point
2072           emulator.  Otherwise, only 32 and 64-bit support is compiled in.
2073           Note that gcc does not generate 80-bit operations by default,
2074           so in most cases this option only enlarges the size of the
2075           floating point emulator without any good reason.
2076
2077           You almost surely want to say N here.
2078
2079 config FPE_FASTFPE
2080         bool "FastFPE math emulation (EXPERIMENTAL)"
2081         depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
2082         ---help---
2083           Say Y here to include the FAST floating point emulator in the kernel.
2084           This is an experimental much faster emulator which now also has full
2085           precision for the mantissa.  It does not support any exceptions.
2086           It is very simple, and approximately 3-6 times faster than NWFPE.
2087
2088           It should be sufficient for most programs.  It may be not suitable
2089           for scientific calculations, but you have to check this for yourself.
2090           If you do not feel you need a faster FP emulation you should better
2091           choose NWFPE.
2092
2093 config VFP
2094         bool "VFP-format floating point maths"
2095         depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
2096         help
2097           Say Y to include VFP support code in the kernel. This is needed
2098           if your hardware includes a VFP unit.
2099
2100           Please see <file:Documentation/arm/VFP/release-notes.txt> for
2101           release notes and additional status information.
2102
2103           Say N if your target does not have VFP hardware.
2104
2105 config VFPv3
2106         bool
2107         depends on VFP
2108         default y if CPU_V7
2109
2110 config NEON
2111         bool "Advanced SIMD (NEON) Extension support"
2112         depends on VFPv3 && CPU_V7
2113         help
2114           Say Y to include support code for NEON, the ARMv7 Advanced SIMD
2115           Extension.
2116
2117 config KERNEL_MODE_NEON
2118         bool "Support for NEON in kernel mode"
2119         depends on NEON && AEABI
2120         help
2121           Say Y to include support for NEON in kernel mode.
2122
2123 endmenu
2124
2125 menu "Userspace binary formats"
2126
2127 source "fs/Kconfig.binfmt"
2128
2129 endmenu
2130
2131 menu "Power management options"
2132
2133 source "kernel/power/Kconfig"
2134
2135 config ARCH_SUSPEND_POSSIBLE
2136         depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
2137                 CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
2138         def_bool y
2139
2140 config ARM_CPU_SUSPEND
2141         def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW
2142         depends on ARCH_SUSPEND_POSSIBLE
2143
2144 config ARCH_HIBERNATION_POSSIBLE
2145         bool
2146         depends on MMU
2147         default y if ARCH_SUSPEND_POSSIBLE
2148
2149 endmenu
2150
2151 source "net/Kconfig"
2152
2153 source "drivers/Kconfig"
2154
2155 source "drivers/firmware/Kconfig"
2156
2157 source "fs/Kconfig"
2158
2159 source "arch/arm/Kconfig.debug"
2160
2161 source "security/Kconfig"
2162
2163 source "crypto/Kconfig"
2164 if CRYPTO
2165 source "arch/arm/crypto/Kconfig"
2166 endif
2167
2168 source "lib/Kconfig"
2169
2170 source "arch/arm/kvm/Kconfig"