arch/arm/Kconfig

   1 config ARM
   2         bool
   3         default y
   4         select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
   5         select ARCH_HAS_DEVMEM_IS_ALLOWED
   6         select ARCH_HAS_ELF_RANDOMIZE
   7         select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
   8         select ARCH_HAVE_CUSTOM_GPIO_H
   9         select ARCH_HAS_GCOV_PROFILE_ALL
  10         select ARCH_MIGHT_HAVE_PC_PARPORT
  11         select ARCH_SUPPORTS_ATOMIC_RMW
  12         select ARCH_USE_BUILTIN_BSWAP
  13         select ARCH_USE_CMPXCHG_LOCKREF
  14         select ARCH_WANT_IPC_PARSE_VERSION
  15         select BUILDTIME_EXTABLE_SORT if MMU
  16         select CLONE_BACKWARDS
  17         select CPU_PM if (SUSPEND || CPU_IDLE)
  18         select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
  19         select EDAC_SUPPORT
  20         select EDAC_ATOMIC_SCRUB
  21         select GENERIC_ALLOCATOR
  22         select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
  23         select GENERIC_CLOCKEVENTS_BROADCAST if SMP
  24         select GENERIC_EARLY_IOREMAP
  25         select GENERIC_IDLE_POLL_SETUP
  26         select GENERIC_IRQ_PROBE
  27         select GENERIC_IRQ_SHOW
  28         select GENERIC_IRQ_SHOW_LEVEL
  29         select GENERIC_PCI_IOMAP
  30         select GENERIC_SCHED_CLOCK
  31         select GENERIC_SMP_IDLE_THREAD
  32         select GENERIC_STRNCPY_FROM_USER
  33         select GENERIC_STRNLEN_USER
  34         select HANDLE_DOMAIN_IRQ
  35         select HARDIRQS_SW_RESEND
  36         select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
  37         select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
  38         select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
  39         select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
  40         select HAVE_ARCH_MMAP_RND_BITS if MMU
  41         select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
  42         select HAVE_ARCH_TRACEHOOK
  43         select HAVE_ARM_SMCCC if CPU_V7
  44         select HAVE_BPF_JIT
  45         select HAVE_CC_STACKPROTECTOR
  46         select HAVE_CONTEXT_TRACKING
  47         select HAVE_C_RECORDMCOUNT
  48         select HAVE_DEBUG_KMEMLEAK
  49         select HAVE_DMA_API_DEBUG
  50         select HAVE_DMA_CONTIGUOUS if MMU
  51         select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU
  52         select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
  53         select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
  54         select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
  55         select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
  56         select HAVE_GENERIC_DMA_COHERENT
  57         select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
  58         select HAVE_IDE if PCI || ISA || PCMCIA
  59         select HAVE_IRQ_TIME_ACCOUNTING
  60         select HAVE_KERNEL_GZIP
  61         select HAVE_KERNEL_LZ4
  62         select HAVE_KERNEL_LZMA
  63         select HAVE_KERNEL_LZO
  64         select HAVE_KERNEL_XZ
  65         select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
  66         select HAVE_KRETPROBES if (HAVE_KPROBES)
  67         select HAVE_MEMBLOCK
  68         select HAVE_MOD_ARCH_SPECIFIC
  69         select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
  70         select HAVE_OPTPROBES if !THUMB2_KERNEL
  71         select HAVE_PERF_EVENTS
  72         select HAVE_PERF_REGS
  73         select HAVE_PERF_USER_STACK_DUMP
  74         select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE)
  75         select HAVE_REGS_AND_STACK_ACCESS_API
  76         select HAVE_SYSCALL_TRACEPOINTS
  77         select HAVE_UID16
  78         select HAVE_VIRT_CPU_ACCOUNTING_GEN
  79         select IRQ_FORCED_THREADING
  80         select MODULES_USE_ELF_REL
  81         select NO_BOOTMEM
  82         select OF_EARLY_FLATTREE if OF
  83         select OF_RESERVED_MEM if OF
  84         select OLD_SIGACTION
  85         select OLD_SIGSUSPEND3
  86         select PERF_USE_VMALLOC
  87         select RTC_LIB
  88         select SYS_SUPPORTS_APM_EMULATION
  89         # Above selects are sorted alphabetically; please add new ones
  90         # according to that.  Thanks.
  91         help
  92           The ARM series is a line of low-power-consumption RISC chip designs
  93           licensed by ARM Ltd and targeted at embedded applications and
  94           handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
  95           manufactured, but legacy ARM-based PC hardware remains popular in
  96           Europe.  There is an ARM Linux project with a web page at
  97           <http://www.arm.linux.org.uk/>.
  98
  99 config ARM_HAS_SG_CHAIN
 100         select ARCH_HAS_SG_CHAIN
 101         bool
 102
 103 config NEED_SG_DMA_LENGTH
 104         bool
 105
 106 config ARM_DMA_USE_IOMMU
 107         bool
 108         select ARM_HAS_SG_CHAIN
 109         select NEED_SG_DMA_LENGTH
 110
 111 if ARM_DMA_USE_IOMMU
 112
 113 config ARM_DMA_IOMMU_ALIGNMENT
 114         int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers"
 115         range 4 9
 116         default 8
 117         help
 118           DMA mapping framework by default aligns all buffers to the smallest
 119           PAGE_SIZE order which is greater than or equal to the requested buffer
 120           size. This works well for buffers up to a few hundreds kilobytes, but
 121           for larger buffers it just a waste of address space. Drivers which has
 122           relatively small addressing window (like 64Mib) might run out of
 123           virtual space with just a few allocations.
 124
 125           With this parameter you can specify the maximum PAGE_SIZE order for
 126           DMA IOMMU buffers. Larger buffers will be aligned only to this
 127           specified order. The order is expressed as a power of two multiplied
 128           by the PAGE_SIZE.
 129
 130 endif
 131
 132 config MIGHT_HAVE_PCI
 133         bool
 134
 135 config SYS_SUPPORTS_APM_EMULATION
 136         bool
 137
 138 config HAVE_TCM
 139         bool
 140         select GENERIC_ALLOCATOR
 141
 142 config HAVE_PROC_CPU
 143         bool
 144
 145 config NO_IOPORT_MAP
 146         bool
 147
 148 config EISA
 149         bool
 150         ---help---
 151           The Extended Industry Standard Architecture (EISA) bus was
 152           developed as an open alternative to the IBM MicroChannel bus.
 153
 154           The EISA bus provided some of the features of the IBM MicroChannel
 155           bus while maintaining backward compatibility with cards made for
 156           the older ISA bus.  The EISA bus saw limited use between 1988 and
 157           1995 when it was made obsolete by the PCI bus.
 158
 159           Say Y here if you are building a kernel for an EISA-based machine.
 160
 161           Otherwise, say N.
 162
 163 config SBUS
 164         bool
 165
 166 config STACKTRACE_SUPPORT
 167         bool
 168         default y
 169
 170 config LOCKDEP_SUPPORT
 171         bool
 172         default y
 173
 174 config TRACE_IRQFLAGS_SUPPORT
 175         bool
 176         default !CPU_V7M
 177
 178 config RWSEM_XCHGADD_ALGORITHM
 179         bool
 180         default y
 181
 182 config ARCH_HAS_ILOG2_U32
 183         bool
 184
 185 config ARCH_HAS_ILOG2_U64
 186         bool
 187
 188 config ARCH_HAS_BANDGAP
 189         bool
 190
 191 config FIX_EARLYCON_MEM
 192         def_bool y if MMU
 193
 194 config GENERIC_HWEIGHT
 195         bool
 196         default y
 197
 198 config GENERIC_CALIBRATE_DELAY
 199         bool
 200         default y
 201
 202 config ARCH_MAY_HAVE_PC_FDC
 203         bool
 204
 205 config ZONE_DMA
 206         bool
 207
 208 config NEED_DMA_MAP_STATE
 209        def_bool y
 210
 211 config ARCH_SUPPORTS_UPROBES
 212         def_bool y
 213
 214 config ARCH_HAS_DMA_SET_COHERENT_MASK
 215         bool
 216
 217 config GENERIC_ISA_DMA
 218         bool
 219
 220 config FIQ
 221         bool
 222
 223 config NEED_RET_TO_USER
 224         bool
 225
 226 config ARCH_MTD_XIP
 227         bool
 228
 229 config VECTORS_BASE
 230         hex
 231         default 0xffff0000 if MMU || CPU_HIGH_VECTOR
 232         default DRAM_BASE if REMAP_VECTORS_TO_RAM
 233         default 0x00000000
 234         help
 235           The base address of exception vectors.  This must be two pages
 236           in size.
 237
 238 config ARM_PATCH_PHYS_VIRT
 239         bool "Patch physical to virtual translations at runtime" if EMBEDDED
 240         default y
 241         depends on !XIP_KERNEL && MMU
 242         help
 243           Patch phys-to-virt and virt-to-phys translation functions at
 244           boot and module load time according to the position of the
 245           kernel in system memory.
 246
 247           This can only be used with non-XIP MMU kernels where the base
 248           of physical memory is at a 16MB boundary.
 249
 250           Only disable this option if you know that you do not require
 251           this feature (eg, building a kernel for a single machine) and
 252           you need to shrink the kernel to the minimal size.
 253
 254 config NEED_MACH_IO_H
 255         bool
 256         help
 257           Select this when mach/io.h is required to provide special
 258           definitions for this platform.  The need for mach/io.h should
 259           be avoided when possible.
 260
 261 config NEED_MACH_MEMORY_H
 262         bool
 263         help
 264           Select this when mach/memory.h is required to provide special
 265           definitions for this platform.  The need for mach/memory.h should
 266           be avoided when possible.
 267
 268 config PHYS_OFFSET
 269         hex "Physical address of main memory" if MMU
 270         depends on !ARM_PATCH_PHYS_VIRT
 271         default DRAM_BASE if !MMU
 272         default 0x00000000 if ARCH_EBSA110 || \
 273                         ARCH_FOOTBRIDGE || \
 274                         ARCH_INTEGRATOR || \
 275                         ARCH_IOP13XX || \
 276                         ARCH_KS8695 || \
 277                         (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
 278         default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 279         default 0x20000000 if ARCH_S5PV210
 280         default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
 281         default 0xc0000000 if ARCH_SA1100
 282         help
 283           Please provide the physical address corresponding to the
 284           location of main memory in your system.
 285
 286 config GENERIC_BUG
 287         def_bool y
 288         depends on BUG
 289
 290 config PGTABLE_LEVELS
 291         int
 292         default 3 if ARM_LPAE
 293         default 2
 294
 295 source "init/Kconfig"
 296
 297 source "kernel/Kconfig.freezer"
 298
 299 menu "System Type"
 300
 301 config MMU
 302         bool "MMU-based Paged Memory Management Support"
 303         default y
 304         help
 305           Select if you want MMU-based virtualised addressing space
 306           support by paged memory management. If unsure, say 'Y'.
 307
 308 config ARCH_MMAP_RND_BITS_MIN
 309         default 8
 310
 311 config ARCH_MMAP_RND_BITS_MAX
 312         default 14 if PAGE_OFFSET=0x40000000
 313         default 15 if PAGE_OFFSET=0x80000000
 314         default 16
 315
 316 #
 317 # The "ARM system type" choice list is ordered alphabetically by option
 318 # text.  Please add new entries in the option alphabetic order.
 319 #
 320 choice
 321         prompt "ARM system type"
 322         default ARM_SINGLE_ARMV7M if !MMU
 323         default ARCH_MULTIPLATFORM if MMU
 324
 325 config ARCH_MULTIPLATFORM
 326         bool "Allow multiple platforms to be selected"
 327         depends on MMU
 328         select ARCH_WANT_OPTIONAL_GPIOLIB
 329         select ARM_HAS_SG_CHAIN
 330         select ARM_PATCH_PHYS_VIRT
 331         select AUTO_ZRELADDR
 332         select CLKSRC_OF
 333         select COMMON_CLK
 334         select GENERIC_CLOCKEVENTS
 335         select MIGHT_HAVE_PCI
 336         select MULTI_IRQ_HANDLER
 337         select SPARSE_IRQ
 338         select USE_OF
 339
 340 config ARM_SINGLE_ARMV7M
 341         bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
 342         depends on !MMU
 343         select ARCH_WANT_OPTIONAL_GPIOLIB
 344         select ARM_NVIC
 345         select AUTO_ZRELADDR
 346         select CLKSRC_OF
 347         select COMMON_CLK
 348         select CPU_V7M
 349         select GENERIC_CLOCKEVENTS
 350         select NO_IOPORT_MAP
 351         select SPARSE_IRQ
 352         select USE_OF
 353
 354
 355 config ARCH_CLPS711X
 356         bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 357         select ARCH_REQUIRE_GPIOLIB
 358         select AUTO_ZRELADDR
 359         select CLKSRC_MMIO
 360         select COMMON_CLK
 361         select CPU_ARM720T
 362         select GENERIC_CLOCKEVENTS
 363         select MFD_SYSCON
 364         select SOC_BUS
 365         help
 366           Support for Cirrus Logic 711x/721x/731x based boards.
 367
 368 config ARCH_GEMINI
 369         bool "Cortina Systems Gemini"
 370         select ARCH_REQUIRE_GPIOLIB
 371         select CLKSRC_MMIO
 372         select CPU_FA526
 373         select GENERIC_CLOCKEVENTS
 374         help
 375           Support for the Cortina Systems Gemini family SoCs
 376
 377 config ARCH_EBSA110
 378         bool "EBSA-110"
 379         select ARCH_USES_GETTIMEOFFSET
 380         select CPU_SA110
 381         select ISA
 382         select NEED_MACH_IO_H
 383         select NEED_MACH_MEMORY_H
 384         select NO_IOPORT_MAP
 385         help
 386           This is an evaluation board for the StrongARM processor available
 387           from Digital. It has limited hardware on-board, including an
 388           Ethernet interface, two PCMCIA sockets, two serial ports and a
 389           parallel port.
 390
 391 config ARCH_EP93XX
 392         bool "EP93xx-based"
 393         select ARCH_HAS_HOLES_MEMORYMODEL
 394         select ARCH_REQUIRE_GPIOLIB
 395         select ARM_AMBA
 396         select ARM_PATCH_PHYS_VIRT
 397         select ARM_VIC
 398         select AUTO_ZRELADDR
 399         select CLKDEV_LOOKUP
 400         select CLKSRC_MMIO
 401         select CPU_ARM920T
 402         select GENERIC_CLOCKEVENTS
 403         help
 404           This enables support for the Cirrus EP93xx series of CPUs.
 405
 406 config ARCH_FOOTBRIDGE
 407         bool "FootBridge"
 408         select CPU_SA110
 409         select FOOTBRIDGE
 410         select GENERIC_CLOCKEVENTS
 411         select HAVE_IDE
 412         select NEED_MACH_IO_H if !MMU
 413         select NEED_MACH_MEMORY_H
 414         help
 415           Support for systems based on the DC21285 companion chip
 416           ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 417
 418 config ARCH_NETX
 419         bool "Hilscher NetX based"
 420         select ARM_VIC
 421         select CLKSRC_MMIO
 422         select CPU_ARM926T
 423         select GENERIC_CLOCKEVENTS
 424         help
 425           This enables support for systems based on the Hilscher NetX Soc
 426
 427 config ARCH_IOP13XX
 428         bool "IOP13xx-based"
 429         depends on MMU
 430         select CPU_XSC3
 431         select NEED_MACH_MEMORY_H
 432         select NEED_RET_TO_USER
 433         select PCI
 434         select PLAT_IOP
 435         select VMSPLIT_1G
 436         select SPARSE_IRQ
 437         help
 438           Support for Intel's IOP13XX (XScale) family of processors.
 439
 440 config ARCH_IOP32X
 441         bool "IOP32x-based"
 442         depends on MMU
 443         select ARCH_REQUIRE_GPIOLIB
 444         select CPU_XSCALE
 445         select GPIO_IOP
 446         select NEED_RET_TO_USER
 447         select PCI
 448         select PLAT_IOP
 449         help
 450           Support for Intel's 80219 and IOP32X (XScale) family of
 451           processors.
 452
 453 config ARCH_IOP33X
 454         bool "IOP33x-based"
 455         depends on MMU
 456         select ARCH_REQUIRE_GPIOLIB
 457         select CPU_XSCALE
 458         select GPIO_IOP
 459         select NEED_RET_TO_USER
 460         select PCI
 461         select PLAT_IOP
 462         help
 463           Support for Intel's IOP33X (XScale) family of processors.
 464
 465 config ARCH_IXP4XX
 466         bool "IXP4xx-based"
 467         depends on MMU
 468         select ARCH_HAS_DMA_SET_COHERENT_MASK
 469         select ARCH_REQUIRE_GPIOLIB
 470         select ARCH_SUPPORTS_BIG_ENDIAN
 471         select CLKSRC_MMIO
 472         select CPU_XSCALE
 473         select DMABOUNCE if PCI
 474         select GENERIC_CLOCKEVENTS
 475         select MIGHT_HAVE_PCI
 476         select NEED_MACH_IO_H
 477         select USB_EHCI_BIG_ENDIAN_DESC
 478         select USB_EHCI_BIG_ENDIAN_MMIO
 479         help
 480           Support for Intel's IXP4XX (XScale) family of processors.
 481
 482 config ARCH_DOVE
 483         bool "Marvell Dove"
 484         select ARCH_REQUIRE_GPIOLIB
 485         select CPU_PJ4
 486         select GENERIC_CLOCKEVENTS
 487         select MIGHT_HAVE_PCI
 488         select MULTI_IRQ_HANDLER
 489         select MVEBU_MBUS
 490         select PINCTRL
 491         select PINCTRL_DOVE
 492         select PLAT_ORION_LEGACY
 493         select SPARSE_IRQ
 494         select PM_GENERIC_DOMAINS if PM
 495         help
 496           Support for the Marvell Dove SoC 88AP510
 497
 498 config ARCH_KS8695
 499         bool "Micrel/Kendin KS8695"
 500         select ARCH_REQUIRE_GPIOLIB
 501         select CLKSRC_MMIO
 502         select CPU_ARM922T
 503         select GENERIC_CLOCKEVENTS
 504         select NEED_MACH_MEMORY_H
 505         help
 506           Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 507           System-on-Chip devices.
 508
 509 config ARCH_W90X900
 510         bool "Nuvoton W90X900 CPU"
 511         select ARCH_REQUIRE_GPIOLIB
 512         select CLKDEV_LOOKUP
 513         select CLKSRC_MMIO
 514         select CPU_ARM926T
 515         select GENERIC_CLOCKEVENTS
 516         help
 517           Support for Nuvoton (Winbond logic dept.) ARM9 processor,
 518           At present, the w90x900 has been renamed nuc900, regarding
 519           the ARM series product line, you can login the following
 520           link address to know more.
 521
 522           <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
 523                 ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 524
 525 config ARCH_LPC32XX
 526         bool "NXP LPC32XX"
 527         select ARCH_REQUIRE_GPIOLIB
 528         select ARM_AMBA
 529         select CLKDEV_LOOKUP
 530         select CLKSRC_LPC32XX
 531         select COMMON_CLK
 532         select CPU_ARM926T
 533         select GENERIC_CLOCKEVENTS
 534         select USE_OF
 535         help
 536           Support for the NXP LPC32XX family of processors
 537
 538 config ARCH_PXA
 539         bool "PXA2xx/PXA3xx-based"
 540         depends on MMU
 541         select ARCH_MTD_XIP
 542         select ARCH_REQUIRE_GPIOLIB
 543         select ARM_CPU_SUSPEND if PM
 544         select AUTO_ZRELADDR
 545         select COMMON_CLK
 546         select CLKDEV_LOOKUP
 547         select CLKSRC_PXA
 548         select CLKSRC_MMIO
 549         select CLKSRC_OF
 550         select CPU_XSCALE if !CPU_XSC3
 551         select GENERIC_CLOCKEVENTS
 552         select GPIO_PXA
 553         select HAVE_IDE
 554         select IRQ_DOMAIN
 555         select MULTI_IRQ_HANDLER
 556         select PLAT_PXA
 557         select SPARSE_IRQ
 558         help
 559           Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 560
 561 config ARCH_RPC
 562         bool "RiscPC"
 563         depends on MMU
 564         select ARCH_ACORN
 565         select ARCH_MAY_HAVE_PC_FDC
 566         select ARCH_SPARSEMEM_ENABLE
 567         select ARCH_USES_GETTIMEOFFSET
 568         select CPU_SA110
 569         select FIQ
 570         select HAVE_IDE
 571         select HAVE_PATA_PLATFORM
 572         select ISA_DMA_API
 573         select NEED_MACH_IO_H
 574         select NEED_MACH_MEMORY_H
 575         select NO_IOPORT_MAP
 576         help
 577           On the Acorn Risc-PC, Linux can support the internal IDE disk and
 578           CD-ROM interface, serial and parallel port, and the floppy drive.
 579
 580 config ARCH_SA1100
 581         bool "SA1100-based"
 582         select ARCH_MTD_XIP
 583         select ARCH_REQUIRE_GPIOLIB
 584         select ARCH_SPARSEMEM_ENABLE
 585         select CLKDEV_LOOKUP
 586         select CLKSRC_MMIO
 587         select CLKSRC_PXA
 588         select CLKSRC_OF if OF
 589         select CPU_FREQ
 590         select CPU_SA1100
 591         select GENERIC_CLOCKEVENTS
 592         select HAVE_IDE
 593         select IRQ_DOMAIN
 594         select ISA
 595         select MULTI_IRQ_HANDLER
 596         select NEED_MACH_MEMORY_H
 597         select SPARSE_IRQ
 598         help
 599           Support for StrongARM 11x0 based boards.
 600
 601 config ARCH_S3C24XX
 602         bool "Samsung S3C24XX SoCs"
 603         select ARCH_REQUIRE_GPIOLIB
 604         select ATAGS
 605         select CLKDEV_LOOKUP
 606         select CLKSRC_SAMSUNG_PWM
 607         select GENERIC_CLOCKEVENTS
 608         select GPIO_SAMSUNG
 609         select HAVE_S3C2410_I2C if I2C
 610         select HAVE_S3C2410_WATCHDOG if WATCHDOG
 611         select HAVE_S3C_RTC if RTC_CLASS
 612         select MULTI_IRQ_HANDLER
 613         select NEED_MACH_IO_H
 614         select SAMSUNG_ATAGS
 615         help
 616           Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
 617           and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
 618           (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
 619           Samsung SMDK2410 development board (and derivatives).
 620
 621 config ARCH_DAVINCI
 622         bool "TI DaVinci"
 623         select ARCH_HAS_HOLES_MEMORYMODEL
 624         select ARCH_REQUIRE_GPIOLIB
 625         select CLKDEV_LOOKUP
 626         select CPU_ARM926T
 627         select GENERIC_ALLOCATOR
 628         select GENERIC_CLOCKEVENTS
 629         select GENERIC_IRQ_CHIP
 630         select HAVE_IDE
 631         select USE_OF
 632         select ZONE_DMA
 633         help
 634           Support for TI's DaVinci platform.
 635
 636 config ARCH_OMAP1
 637         bool "TI OMAP1"
 638         depends on MMU
 639         select ARCH_HAS_HOLES_MEMORYMODEL
 640         select ARCH_OMAP
 641         select ARCH_REQUIRE_GPIOLIB
 642         select CLKDEV_LOOKUP
 643         select CLKSRC_MMIO
 644         select GENERIC_CLOCKEVENTS
 645         select GENERIC_IRQ_CHIP
 646         select HAVE_IDE
 647         select IRQ_DOMAIN
 648         select MULTI_IRQ_HANDLER
 649         select NEED_MACH_IO_H if PCCARD
 650         select NEED_MACH_MEMORY_H
 651         select SPARSE_IRQ
 652         help
 653           Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
 654
 655 endchoice
 656
 657 menu "Multiple platform selection"
 658         depends on ARCH_MULTIPLATFORM
 659
 660 comment "CPU Core family selection"
 661
 662 config ARCH_MULTI_V4
 663         bool "ARMv4 based platforms (FA526)"
 664         depends on !ARCH_MULTI_V6_V7
 665         select ARCH_MULTI_V4_V5
 666         select CPU_FA526
 667
 668 config ARCH_MULTI_V4T
 669         bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
 670         depends on !ARCH_MULTI_V6_V7
 671         select ARCH_MULTI_V4_V5
 672         select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
 673                 CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
 674                 CPU_ARM925T || CPU_ARM940T)
 675
 676 config ARCH_MULTI_V5
 677         bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
 678         depends on !ARCH_MULTI_V6_V7
 679         select ARCH_MULTI_V4_V5
 680         select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
 681                 CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
 682                 CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
 683
 684 config ARCH_MULTI_V4_V5
 685         bool
 686
 687 config ARCH_MULTI_V6
 688         bool "ARMv6 based platforms (ARM11)"
 689         select ARCH_MULTI_V6_V7
 690         select CPU_V6K
 691
 692 config ARCH_MULTI_V7
 693         bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 694         default y
 695         select ARCH_MULTI_V6_V7
 696         select CPU_V7
 697         select HAVE_SMP
 698
 699 config ARCH_MULTI_V6_V7
 700         bool
 701         select MIGHT_HAVE_CACHE_L2X0
 702
 703 config ARCH_MULTI_CPU_AUTO
 704         def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
 705         select ARCH_MULTI_V5
 706
 707 endmenu
 708
 709 config ARCH_VIRT
 710         bool "Dummy Virtual Machine"
 711         depends on ARCH_MULTI_V7
 712         select ARM_AMBA
 713         select ARM_GIC
 714         select ARM_GIC_V2M if PCI_MSI
 715         select ARM_GIC_V3
 716         select ARM_PSCI
 717         select HAVE_ARM_ARCH_TIMER
 718
 719 #
 720 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 721 # Kconfigs may be included either alphabetically (according to the
 722 # plat- suffix) or along side the corresponding mach-* source.
 723 #
 724 source "arch/arm/mach-mvebu/Kconfig"
 725
 726 source "arch/arm/mach-alpine/Kconfig"
 727
 728 source "arch/arm/mach-artpec/Kconfig"
 729
 730 source "arch/arm/mach-asm9260/Kconfig"
 731
 732 source "arch/arm/mach-at91/Kconfig"
 733
 734 source "arch/arm/mach-axxia/Kconfig"
 735
 736 source "arch/arm/mach-bcm/Kconfig"
 737
 738 source "arch/arm/mach-berlin/Kconfig"
 739
 740 source "arch/arm/mach-clps711x/Kconfig"
 741
 742 source "arch/arm/mach-cns3xxx/Kconfig"
 743
 744 source "arch/arm/mach-davinci/Kconfig"
 745
 746 source "arch/arm/mach-digicolor/Kconfig"
 747
 748 source "arch/arm/mach-dove/Kconfig"
 749
 750 source "arch/arm/mach-ep93xx/Kconfig"
 751
 752 source "arch/arm/mach-footbridge/Kconfig"
 753
 754 source "arch/arm/mach-gemini/Kconfig"
 755
 756 source "arch/arm/mach-highbank/Kconfig"
 757
 758 source "arch/arm/mach-hisi/Kconfig"
 759
 760 source "arch/arm/mach-integrator/Kconfig"
 761
 762 source "arch/arm/mach-iop32x/Kconfig"
 763
 764 source "arch/arm/mach-iop33x/Kconfig"
 765
 766 source "arch/arm/mach-iop13xx/Kconfig"
 767
 768 source "arch/arm/mach-ixp4xx/Kconfig"
 769
 770 source "arch/arm/mach-keystone/Kconfig"
 771
 772 source "arch/arm/mach-ks8695/Kconfig"
 773
 774 source "arch/arm/mach-meson/Kconfig"
 775
 776 source "arch/arm/mach-moxart/Kconfig"
 777
 778 source "arch/arm/mach-mv78xx0/Kconfig"
 779
 780 source "arch/arm/mach-imx/Kconfig"
 781
 782 source "arch/arm/mach-mediatek/Kconfig"
 783
 784 source "arch/arm/mach-mxs/Kconfig"
 785
 786 source "arch/arm/mach-netx/Kconfig"
 787
 788 source "arch/arm/mach-nomadik/Kconfig"
 789
 790 source "arch/arm/mach-nspire/Kconfig"
 791
 792 source "arch/arm/plat-omap/Kconfig"
 793
 794 source "arch/arm/mach-omap1/Kconfig"
 795
 796 source "arch/arm/mach-omap2/Kconfig"
 797
 798 source "arch/arm/mach-orion5x/Kconfig"
 799
 800 source "arch/arm/mach-picoxcell/Kconfig"
 801
 802 source "arch/arm/mach-pxa/Kconfig"
 803 source "arch/arm/plat-pxa/Kconfig"
 804
 805 source "arch/arm/mach-mmp/Kconfig"
 806
 807 source "arch/arm/mach-qcom/Kconfig"
 808
 809 source "arch/arm/mach-realview/Kconfig"
 810
 811 source "arch/arm/mach-rockchip/Kconfig"
 812
 813 source "arch/arm/mach-sa1100/Kconfig"
 814
 815 source "arch/arm/mach-socfpga/Kconfig"
 816
 817 source "arch/arm/mach-spear/Kconfig"
 818
 819 source "arch/arm/mach-sti/Kconfig"
 820
 821 source "arch/arm/mach-s3c24xx/Kconfig"
 822
 823 source "arch/arm/mach-s3c64xx/Kconfig"
 824
 825 source "arch/arm/mach-s5pv210/Kconfig"
 826
 827 source "arch/arm/mach-exynos/Kconfig"
 828 source "arch/arm/plat-samsung/Kconfig"
 829
 830 source "arch/arm/mach-shmobile/Kconfig"
 831
 832 source "arch/arm/mach-sunxi/Kconfig"
 833
 834 source "arch/arm/mach-prima2/Kconfig"
 835
 836 source "arch/arm/mach-tango/Kconfig"
 837
 838 source "arch/arm/mach-tegra/Kconfig"
 839
 840 source "arch/arm/mach-u300/Kconfig"
 841
 842 source "arch/arm/mach-uniphier/Kconfig"
 843
 844 source "arch/arm/mach-ux500/Kconfig"
 845
 846 source "arch/arm/mach-versatile/Kconfig"
 847
 848 source "arch/arm/mach-vexpress/Kconfig"
 849 source "arch/arm/plat-versatile/Kconfig"
 850
 851 source "arch/arm/mach-vt8500/Kconfig"
 852
 853 source "arch/arm/mach-w90x900/Kconfig"
 854
 855 source "arch/arm/mach-zx/Kconfig"
 856
 857 source "arch/arm/mach-zynq/Kconfig"
 858
 859 # ARMv7-M architecture
 860 config ARCH_EFM32
 861         bool "Energy Micro efm32"
 862         depends on ARM_SINGLE_ARMV7M
 863         select ARCH_REQUIRE_GPIOLIB
 864         help
 865           Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
 866           processors.
 867
 868 config ARCH_LPC18XX
 869         bool "NXP LPC18xx/LPC43xx"
 870         depends on ARM_SINGLE_ARMV7M
 871         select ARCH_HAS_RESET_CONTROLLER
 872         select ARM_AMBA
 873         select CLKSRC_LPC32XX
 874         select PINCTRL
 875         help
 876           Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
 877           high performance microcontrollers.
 878
 879 config ARCH_STM32
 880         bool "STMicrolectronics STM32"
 881         depends on ARM_SINGLE_ARMV7M
 882         select ARCH_HAS_RESET_CONTROLLER
 883         select ARMV7M_SYSTICK
 884         select CLKSRC_STM32
 885         select PINCTRL
 886         select RESET_CONTROLLER
 887         help
 888           Support for STMicroelectronics STM32 processors.
 889
 890 config MACH_STM32F429
 891         bool "STMicrolectronics STM32F429"
 892         depends on ARCH_STM32
 893         default y
 894
 895 # Definitions to make life easier
 896 config ARCH_ACORN
 897         bool
 898
 899 config PLAT_IOP
 900         bool
 901         select GENERIC_CLOCKEVENTS
 902
 903 config PLAT_ORION
 904         bool
 905         select CLKSRC_MMIO
 906         select COMMON_CLK
 907         select GENERIC_IRQ_CHIP
 908         select IRQ_DOMAIN
 909
 910 config PLAT_ORION_LEGACY
 911         bool
 912         select PLAT_ORION
 913
 914 config PLAT_PXA
 915         bool
 916
 917 config PLAT_VERSATILE
 918         bool
 919
 920 source "arch/arm/firmware/Kconfig"
 921
 922 source arch/arm/mm/Kconfig
 923
 924 config IWMMXT
 925         bool "Enable iWMMXt support"
 926         depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
 927         default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
 928         help
 929           Enable support for iWMMXt context switching at run time if
 930           running on a CPU that supports it.
 931
 932 config MULTI_IRQ_HANDLER
 933         bool
 934         help
 935           Allow each machine to specify it's own IRQ handler at run time.
 936
 937 if !MMU
 938 source "arch/arm/Kconfig-nommu"
 939 endif
 940
 941 config PJ4B_ERRATA_4742
 942         bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
 943         depends on CPU_PJ4B && MACH_ARMADA_370
 944         default y
 945         help
 946           When coming out of either a Wait for Interrupt (WFI) or a Wait for
 947           Event (WFE) IDLE states, a specific timing sensitivity exists between
 948           the retiring WFI/WFE instructions and the newly issued subsequent
 949           instructions.  This sensitivity can result in a CPU hang scenario.
 950           Workaround:
 951           The software must insert either a Data Synchronization Barrier (DSB)
 952           or Data Memory Barrier (DMB) command immediately after the WFI/WFE
 953           instruction
 954
 955 config ARM_ERRATA_326103
 956         bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
 957         depends on CPU_V6
 958         help
 959           Executing a SWP instruction to read-only memory does not set bit 11
 960           of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
 961           treat the access as a read, preventing a COW from occurring and
 962           causing the faulting task to livelock.
 963
 964 config ARM_ERRATA_411920
 965         bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 966         depends on CPU_V6 || CPU_V6K
 967         help
 968           Invalidation of the Instruction Cache operation can
 969           fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
 970           It does not affect the MPCore. This option enables the ARM Ltd.
 971           recommended workaround.
 972
 973 config ARM_ERRATA_430973
 974         bool "ARM errata: Stale prediction on replaced interworking branch"
 975         depends on CPU_V7
 976         help
 977           This option enables the workaround for the 430973 Cortex-A8
 978           r1p* erratum. If a code sequence containing an ARM/Thumb
 979           interworking branch is replaced with another code sequence at the
 980           same virtual address, whether due to self-modifying code or virtual
 981           to physical address re-mapping, Cortex-A8 does not recover from the
 982           stale interworking branch prediction. This results in Cortex-A8
 983           executing the new code sequence in the incorrect ARM or Thumb state.
 984           The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
 985           and also flushes the branch target cache at every context switch.
 986           Note that setting specific bits in the ACTLR register may not be
 987           available in non-secure mode.
 988
 989 config ARM_ERRATA_458693
 990         bool "ARM errata: Processor deadlock when a false hazard is created"
 991         depends on CPU_V7
 992         depends on !ARCH_MULTIPLATFORM
 993         help
 994           This option enables the workaround for the 458693 Cortex-A8 (r2p0)
 995           erratum. For very specific sequences of memory operations, it is
 996           possible for a hazard condition intended for a cache line to instead
 997           be incorrectly associated with a different cache line. This false
 998           hazard might then cause a processor deadlock. The workaround enables
 999           the L1 caching of the NEON accesses and disables the PLD instruction
1000           in the ACTLR register. Note that setting specific bits in the ACTLR
1001           register may not be available in non-secure mode.
1002
1003 config ARM_ERRATA_460075
1004         bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
1005         depends on CPU_V7
1006         depends on !ARCH_MULTIPLATFORM
1007         help
1008           This option enables the workaround for the 460075 Cortex-A8 (r2p0)
1009           erratum. Any asynchronous access to the L2 cache may encounter a
1010           situation in which recent store transactions to the L2 cache are lost
1011           and overwritten with stale memory contents from external memory. The
1012           workaround disables the write-allocate mode for the L2 cache via the
1013           ACTLR register. Note that setting specific bits in the ACTLR register
1014           may not be available in non-secure mode.
1015
1016 config ARM_ERRATA_742230
1017         bool "ARM errata: DMB operation may be faulty"
1018         depends on CPU_V7 && SMP
1019         depends on !ARCH_MULTIPLATFORM
1020         help
1021           This option enables the workaround for the 742230 Cortex-A9
1022           (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
1023           between two write operations may not ensure the correct visibility
1024           ordering of the two writes. This workaround sets a specific bit in
1025           the diagnostic register of the Cortex-A9 which causes the DMB
1026           instruction to behave as a DSB, ensuring the correct behaviour of
1027           the two writes.
1028
1029 config ARM_ERRATA_742231
1030         bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
1031         depends on CPU_V7 && SMP
1032         depends on !ARCH_MULTIPLATFORM
1033         help
1034           This option enables the workaround for the 742231 Cortex-A9
1035           (r2p0..r2p2) erratum. Under certain conditions, specific to the
1036           Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
1037           accessing some data located in the same cache line, may get corrupted
1038           data due to bad handling of the address hazard when the line gets
1039           replaced from one of the CPUs at the same time as another CPU is
1040           accessing it. This workaround sets specific bits in the diagnostic
1041           register of the Cortex-A9 which reduces the linefill issuing
1042           capabilities of the processor.
1043
1044 config ARM_ERRATA_643719
1045         bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
1046         depends on CPU_V7 && SMP
1047         default y
1048         help
1049           This option enables the workaround for the 643719 Cortex-A9 (prior to
1050           r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
1051           register returns zero when it should return one. The workaround
1052           corrects this value, ensuring cache maintenance operations which use
1053           it behave as intended and avoiding data corruption.
1054
1055 config ARM_ERRATA_720789
1056         bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
1057         depends on CPU_V7
1058         help
1059           This option enables the workaround for the 720789 Cortex-A9 (prior to
1060           r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
1061           broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
1062           As a consequence of this erratum, some TLB entries which should be
1063           invalidated are not, resulting in an incoherency in the system page
1064           tables. The workaround changes the TLB flushing routines to invalidate
1065           entries regardless of the ASID.
1066
1067 config ARM_ERRATA_743622
1068         bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
1069         depends on CPU_V7
1070         depends on !ARCH_MULTIPLATFORM
1071         help
1072           This option enables the workaround for the 743622 Cortex-A9
1073           (r2p*) erratum. Under very rare conditions, a faulty
1074           optimisation in the Cortex-A9 Store Buffer may lead to data
1075           corruption. This workaround sets a specific bit in the diagnostic
1076           register of the Cortex-A9 which disables the Store Buffer
1077           optimisation, preventing the defect from occurring. This has no
1078           visible impact on the overall performance or power consumption of the
1079           processor.
1080
1081 config ARM_ERRATA_751472
1082         bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
1083         depends on CPU_V7
1084         depends on !ARCH_MULTIPLATFORM
1085         help
1086           This option enables the workaround for the 751472 Cortex-A9 (prior
1087           to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
1088           completion of a following broadcasted operation if the second
1089           operation is received by a CPU before the ICIALLUIS has completed,
1090           potentially leading to corrupted entries in the cache or TLB.
1091
1092 config ARM_ERRATA_754322
1093         bool "ARM errata: possible faulty MMU translations following an ASID switch"
1094         depends on CPU_V7
1095         help
1096           This option enables the workaround for the 754322 Cortex-A9 (r2p*,
1097           r3p*) erratum. A speculative memory access may cause a page table walk
1098           which starts prior to an ASID switch but completes afterwards. This
1099           can populate the micro-TLB with a stale entry which may be hit with
1100           the new ASID. This workaround places two dsb instructions in the mm
1101           switching code so that no page table walks can cross the ASID switch.
1102
1103 config ARM_ERRATA_754327
1104         bool "ARM errata: no automatic Store Buffer drain"
1105         depends on CPU_V7 && SMP
1106         help
1107           This option enables the workaround for the 754327 Cortex-A9 (prior to
1108           r2p0) erratum. The Store Buffer does not have any automatic draining
1109           mechanism and therefore a livelock may occur if an external agent
1110           continuously polls a memory location waiting to observe an update.
1111           This workaround defines cpu_relax() as smp_mb(), preventing correctly
1112           written polling loops from denying visibility of updates to memory.
1113
1114 config ARM_ERRATA_364296
1115         bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
1116         depends on CPU_V6
1117         help
1118           This options enables the workaround for the 364296 ARM1136
1119           r0p2 erratum (possible cache data corruption with
1120           hit-under-miss enabled). It sets the undocumented bit 31 in
1121           the auxiliary control register and the FI bit in the control
1122           register, thus disabling hit-under-miss without putting the
1123           processor into full low interrupt latency mode. ARM11MPCore
1124           is not affected.
1125
1126 config ARM_ERRATA_764369
1127         bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
1128         depends on CPU_V7 && SMP
1129         help
1130           This option enables the workaround for erratum 764369
1131           affecting Cortex-A9 MPCore with two or more processors (all
1132           current revisions). Under certain timing circumstances, a data
1133           cache line maintenance operation by MVA targeting an Inner
1134           Shareable memory region may fail to proceed up to either the
1135           Point of Coherency or to the Point of Unification of the
1136           system. This workaround adds a DSB instruction before the
1137           relevant cache maintenance functions and sets a specific bit
1138           in the diagnostic control register of the SCU.
1139
1140 config ARM_ERRATA_775420
1141        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
1142        depends on CPU_V7
1143        help
1144          This option enables the workaround for the 775420 Cortex-A9 (r2p2,
1145          r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
1146          operation aborts with MMU exception, it might cause the processor
1147          to deadlock. This workaround puts DSB before executing ISB if
1148          an abort may occur on cache maintenance.
1149
1150 config ARM_ERRATA_798181
1151         bool "ARM errata: TLBI/DSB failure on Cortex-A15"
1152         depends on CPU_V7 && SMP
1153         help
1154           On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
1155           adequately shooting down all use of the old entries. This
1156           option enables the Linux kernel workaround for this erratum
1157           which sends an IPI to the CPUs that are running the same ASID
1158           as the one being invalidated.
1159
1160 config ARM_ERRATA_773022
1161         bool "ARM errata: incorrect instructions may be executed from loop buffer"
1162         depends on CPU_V7
1163         help
1164           This option enables the workaround for the 773022 Cortex-A15
1165           (up to r0p4) erratum. In certain rare sequences of code, the
1166           loop buffer may deliver incorrect instructions. This
1167           workaround disables the loop buffer to avoid the erratum.
1168
1169 endmenu
1170
1171 source "arch/arm/common/Kconfig"
1172
1173 menu "Bus support"
1174
1175 config ISA
1176         bool
1177         help
1178           Find out whether you have ISA slots on your motherboard.  ISA is the
1179           name of a bus system, i.e. the way the CPU talks to the other stuff
1180           inside your box.  Other bus systems are PCI, EISA, MicroChannel
1181           (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
1182           newer boards don't support it.  If you have ISA, say Y, otherwise N.
1183
1184 # Select ISA DMA controller support
1185 config ISA_DMA
1186         bool
1187         select ISA_DMA_API
1188
1189 # Select ISA DMA interface
1190 config ISA_DMA_API
1191         bool
1192
1193 config PCI
1194         bool "PCI support" if MIGHT_HAVE_PCI
1195         help
1196           Find out whether you have a PCI motherboard. PCI is the name of a
1197           bus system, i.e. the way the CPU talks to the other stuff inside
1198           your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1199           VESA. If you have PCI, say Y, otherwise N.
1200
1201 config PCI_DOMAINS
1202         bool
1203         depends on PCI
1204
1205 config PCI_DOMAINS_GENERIC
1206         def_bool PCI_DOMAINS
1207
1208 config PCI_NANOENGINE
1209         bool "BSE nanoEngine PCI support"
1210         depends on SA1100_NANOENGINE
1211         help
1212           Enable PCI on the BSE nanoEngine board.
1213
1214 config PCI_SYSCALL
1215         def_bool PCI
1216
1217 config PCI_HOST_ITE8152
1218         bool
1219         depends on PCI && MACH_ARMCORE
1220         default y
1221         select DMABOUNCE
1222
1223 source "drivers/pci/Kconfig"
1224
1225 source "drivers/pcmcia/Kconfig"
1226
1227 endmenu
1228
1229 menu "Kernel Features"
1230
1231 config HAVE_SMP
1232         bool
1233         help
1234           This option should be selected by machines which have an SMP-
1235           capable CPU.
1236
1237           The only effect of this option is to make the SMP-related
1238           options available to the user for configuration.
1239
1240 config SMP
1241         bool "Symmetric Multi-Processing"
1242         depends on CPU_V6K || CPU_V7
1243         depends on GENERIC_CLOCKEVENTS
1244         depends on HAVE_SMP
1245         depends on MMU || ARM_MPU
1246         select IRQ_WORK
1247         help
1248           This enables support for systems with more than one CPU. If you have
1249           a system with only one CPU, say N. If you have a system with more
1250           than one CPU, say Y.
1251
1252           If you say N here, the kernel will run on uni- and multiprocessor
1253           machines, but will use only one CPU of a multiprocessor machine. If
1254           you say Y here, the kernel will run on many, but not all,
1255           uniprocessor machines. On a uniprocessor machine, the kernel
1256           will run faster if you say N here.
1257
1258           See also <file:Documentation/x86/i386/IO-APIC.txt>,
1259           <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
1260           <http://tldp.org/HOWTO/SMP-HOWTO.html>.
1261
1262           If you don't know what to do here, say N.
1263
1264 config SMP_ON_UP
1265         bool "Allow booting SMP kernel on uniprocessor systems"
1266         depends on SMP && !XIP_KERNEL && MMU
1267         default y
1268         help
1269           SMP kernels contain instructions which fail on non-SMP processors.
1270           Enabling this option allows the kernel to modify itself to make
1271           these instructions safe.  Disabling it allows about 1K of space
1272           savings.
1273
1274           If you don't know what to do here, say Y.
1275
1276 config ARM_CPU_TOPOLOGY
1277         bool "Support cpu topology definition"
1278         depends on SMP && CPU_V7
1279         default y
1280         help
1281           Support ARM cpu topology definition. The MPIDR register defines
1282           affinity between processors which is then used to describe the cpu
1283           topology of an ARM System.
1284
1285 config SCHED_MC
1286         bool "Multi-core scheduler support"
1287         depends on ARM_CPU_TOPOLOGY
1288         help
1289           Multi-core scheduler support improves the CPU scheduler's decision
1290           making when dealing with multi-core CPU chips at a cost of slightly
1291           increased overhead in some places. If unsure say N here.
1292
1293 config SCHED_SMT
1294         bool "SMT scheduler support"
1295         depends on ARM_CPU_TOPOLOGY
1296         help
1297           Improves the CPU scheduler's decision making when dealing with
1298           MultiThreading at a cost of slightly increased overhead in some
1299           places. If unsure say N here.
1300
1301 config HAVE_ARM_SCU
1302         bool
1303         help
1304           This option enables support for the ARM system coherency unit
1305
1306 config HAVE_ARM_ARCH_TIMER
1307         bool "Architected timer support"
1308         depends on CPU_V7
1309         select ARM_ARCH_TIMER
1310         select GENERIC_CLOCKEVENTS
1311         help
1312           This option enables support for the ARM architected timer
1313
1314 config HAVE_ARM_TWD
1315         bool
1316         select CLKSRC_OF if OF
1317         help
1318           This options enables support for the ARM timer and watchdog unit
1319
1320 config MCPM
1321         bool "Multi-Cluster Power Management"
1322         depends on CPU_V7 && SMP
1323         help
1324           This option provides the common power management infrastructure
1325           for (multi-)cluster based systems, such as big.LITTLE based
1326           systems.
1327
1328 config MCPM_QUAD_CLUSTER
1329         bool
1330         depends on MCPM
1331         help
1332           To avoid wasting resources unnecessarily, MCPM only supports up
1333           to 2 clusters by default.
1334           Platforms with 3 or 4 clusters that use MCPM must select this
1335           option to allow the additional clusters to be managed.
1336
1337 config BIG_LITTLE
1338         bool "big.LITTLE support (Experimental)"
1339         depends on CPU_V7 && SMP
1340         select MCPM
1341         help
1342           This option enables support selections for the big.LITTLE
1343           system architecture.
1344
1345 config BL_SWITCHER
1346         bool "big.LITTLE switcher support"
1347         depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
1348         select CPU_PM
1349         help
1350           The big.LITTLE "switcher" provides the core functionality to
1351           transparently handle transition between a cluster of A15's
1352           and a cluster of A7's in a big.LITTLE system.
1353
1354 config BL_SWITCHER_DUMMY_IF
1355         tristate "Simple big.LITTLE switcher user interface"
1356         depends on BL_SWITCHER && DEBUG_KERNEL
1357         help
1358           This is a simple and dummy char dev interface to control
1359           the big.LITTLE switcher core code.  It is meant for
1360           debugging purposes only.
1361
1362 choice
1363         prompt "Memory split"
1364         depends on MMU
1365         default VMSPLIT_3G
1366         help
1367           Select the desired split between kernel and user memory.
1368
1369           If you are not absolutely sure what you are doing, leave this
1370           option alone!
1371
1372         config VMSPLIT_3G
1373                 bool "3G/1G user/kernel split"
1374         config VMSPLIT_3G_OPT
1375                 bool "3G/1G user/kernel split (for full 1G low memory)"
1376         config VMSPLIT_2G
1377                 bool "2G/2G user/kernel split"
1378         config VMSPLIT_1G
1379                 bool "1G/3G user/kernel split"
1380 endchoice
1381
1382 config PAGE_OFFSET
1383         hex
1384         default PHYS_OFFSET if !MMU
1385         default 0x40000000 if VMSPLIT_1G
1386         default 0x80000000 if VMSPLIT_2G
1387         default 0xB0000000 if VMSPLIT_3G_OPT
1388         default 0xC0000000
1389
1390 config NR_CPUS
1391         int "Maximum number of CPUs (2-32)"
1392         range 2 32
1393         depends on SMP
1394         default "4"
1395
1396 config HOTPLUG_CPU
1397         bool "Support for hot-pluggable CPUs"
1398         depends on SMP
1399         help
1400           Say Y here to experiment with turning CPUs off and on.  CPUs
1401           can be controlled through /sys/devices/system/cpu.
1402
1403 config ARM_PSCI
1404         bool "Support for the ARM Power State Coordination Interface (PSCI)"
1405         depends on HAVE_ARM_SMCCC
1406         select ARM_PSCI_FW
1407         help
1408           Say Y here if you want Linux to communicate with system firmware
1409           implementing the PSCI specification for CPU-centric power
1410           management operations described in ARM document number ARM DEN
1411           0022A ("Power State Coordination Interface System Software on
1412           ARM processors").
1413
1414 # The GPIO number here must be sorted by descending number. In case of
1415 # a multiplatform kernel, we just want the highest value required by the
1416 # selected platforms.
1417 config ARCH_NR_GPIO
1418         int
1419         default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
1420                 ARCH_ZYNQ
1421         default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
1422                 SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
1423         default 416 if ARCH_SUNXI
1424         default 392 if ARCH_U8500
1425         default 352 if ARCH_VT8500
1426         default 288 if ARCH_ROCKCHIP
1427         default 264 if MACH_H4700
1428         default 0
1429         help
1430           Maximum number of GPIOs in the system.
1431
1432           If unsure, leave the default value.
1433
1434 source kernel/Kconfig.preempt
1435
1436 config HZ_FIXED
1437         int
1438         default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
1439                 ARCH_S5PV210 || ARCH_EXYNOS4
1440         default 128 if SOC_AT91RM9200
1441         default 0
1442
1443 choice
1444         depends on HZ_FIXED = 0
1445         prompt "Timer frequency"
1446
1447 config HZ_100
1448         bool "100 Hz"
1449
1450 config HZ_200
1451         bool "200 Hz"
1452
1453 config HZ_250
1454         bool "250 Hz"
1455
1456 config HZ_300
1457         bool "300 Hz"
1458
1459 config HZ_500
1460         bool "500 Hz"
1461
1462 config HZ_1000
1463         bool "1000 Hz"
1464
1465 endchoice
1466
1467 config HZ
1468         int
1469         default HZ_FIXED if HZ_FIXED != 0
1470         default 100 if HZ_100
1471         default 200 if HZ_200
1472         default 250 if HZ_250
1473         default 300 if HZ_300
1474         default 500 if HZ_500
1475         default 1000
1476
1477 config SCHED_HRTICK
1478         def_bool HIGH_RES_TIMERS
1479
1480 config THUMB2_KERNEL
1481         bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
1482         depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
1483         default y if CPU_THUMBONLY
1484         select AEABI
1485         select ARM_ASM_UNIFIED
1486         select ARM_UNWIND
1487         help
1488           By enabling this option, the kernel will be compiled in
1489           Thumb-2 mode. A compiler/assembler that understand the unified
1490           ARM-Thumb syntax is needed.
1491
1492           If unsure, say N.
1493
1494 config THUMB2_AVOID_R_ARM_THM_JUMP11
1495         bool "Work around buggy Thumb-2 short branch relocations in gas"
1496         depends on THUMB2_KERNEL && MODULES
1497         default y
1498         help
1499           Various binutils versions can resolve Thumb-2 branches to
1500           locally-defined, preemptible global symbols as short-range "b.n"
1501           branch instructions.
1502
1503           This is a problem, because there's no guarantee the final
1504           destination of the symbol, or any candidate locations for a
1505           trampoline, are within range of the branch.  For this reason, the
1506           kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
1507           relocation in modules at all, and it makes little sense to add
1508           support.
1509
1510           The symptom is that the kernel fails with an "unsupported
1511           relocation" error when loading some modules.
1512
1513           Until fixed tools are available, passing
1514           -fno-optimize-sibling-calls to gcc should prevent gcc generating
1515           code which hits this problem, at the cost of a bit of extra runtime
1516           stack usage in some cases.
1517
1518           The problem is described in more detail at:
1519               https://bugs.launchpad.net/binutils-linaro/+bug/725126
1520
1521           Only Thumb-2 kernels are affected.
1522
1523           Unless you are sure your tools don't have this problem, say Y.
1524
1525 config ARM_ASM_UNIFIED
1526         bool
1527
1528 config ARM_PATCH_IDIV
1529         bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
1530         depends on CPU_32v7 && !XIP_KERNEL
1531         default y
1532         help
1533           The ARM compiler inserts calls to __aeabi_idiv() and
1534           __aeabi_uidiv() when it needs to perform division on signed
1535           and unsigned integers. Some v7 CPUs have support for the sdiv
1536           and udiv instructions that can be used to implement those
1537           functions.
1538
1539           Enabling this option allows the kernel to modify itself to
1540           replace the first two instructions of these library functions
1541           with the sdiv or udiv plus "bx lr" instructions when the CPU
1542           it is running on supports them. Typically this will be faster
1543           and less power intensive than running the original library
1544           code to do integer division.
1545
1546 config AEABI
1547         bool "Use the ARM EABI to compile the kernel"
1548         help
1549           This option allows for the kernel to be compiled using the latest
1550           ARM ABI (aka EABI).  This is only useful if you are using a user
1551           space environment that is also compiled with EABI.
1552
1553           Since there are major incompatibilities between the legacy ABI and
1554           EABI, especially with regard to structure member alignment, this
1555           option also changes the kernel syscall calling convention to
1556           disambiguate both ABIs and allow for backward compatibility support
1557           (selected with CONFIG_OABI_COMPAT).
1558
1559           To use this you need GCC version 4.0.0 or later.
1560
1561 config OABI_COMPAT
1562         bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
1563         depends on AEABI && !THUMB2_KERNEL
1564         help
1565           This option preserves the old syscall interface along with the
1566           new (ARM EABI) one. It also provides a compatibility layer to
1567           intercept syscalls that have structure arguments which layout
1568           in memory differs between the legacy ABI and the new ARM EABI
1569           (only for non "thumb" binaries). This option adds a tiny
1570           overhead to all syscalls and produces a slightly larger kernel.
1571
1572           The seccomp filter system will not be available when this is
1573           selected, since there is no way yet to sensibly distinguish
1574           between calling conventions during filtering.
1575
1576           If you know you'll be using only pure EABI user space then you
1577           can say N here. If this option is not selected and you attempt
1578           to execute a legacy ABI binary then the result will be
1579           UNPREDICTABLE (in fact it can be predicted that it won't work
1580           at all). If in doubt say N.
1581
1582 config ARCH_HAS_HOLES_MEMORYMODEL
1583         bool
1584
1585 config ARCH_SPARSEMEM_ENABLE
1586         bool
1587
1588 config ARCH_SPARSEMEM_DEFAULT
1589         def_bool ARCH_SPARSEMEM_ENABLE
1590
1591 config ARCH_SELECT_MEMORY_MODEL
1592         def_bool ARCH_SPARSEMEM_ENABLE
1593
1594 config HAVE_ARCH_PFN_VALID
1595         def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
1596
1597 config HAVE_GENERIC_RCU_GUP
1598         def_bool y
1599         depends on ARM_LPAE
1600
1601 config HIGHMEM
1602         bool "High Memory Support"
1603         depends on MMU
1604         help
1605           The address space of ARM processors is only 4 Gigabytes large
1606           and it has to accommodate user address space, kernel address
1607           space as well as some memory mapped IO. That means that, if you
1608           have a large amount of physical memory and/or IO, not all of the
1609           memory can be "permanently mapped" by the kernel. The physical
1610           memory that is not permanently mapped is called "high memory".
1611
1612           Depending on the selected kernel/user memory split, minimum
1613           vmalloc space and actual amount of RAM, you may not need this
1614           option which should result in a slightly faster kernel.
1615
1616           If unsure, say n.
1617
1618 config HIGHPTE
1619         bool "Allocate 2nd-level pagetables from highmem" if EXPERT
1620         depends on HIGHMEM
1621         default y
1622         help
1623           The VM uses one page of physical memory for each page table.
1624           For systems with a lot of processes, this can use a lot of
1625           precious low memory, eventually leading to low memory being
1626           consumed by page tables.  Setting this option will allow
1627           user-space 2nd level page tables to reside in high memory.
1628
1629 config CPU_SW_DOMAIN_PAN
1630         bool "Enable use of CPU domains to implement privileged no-access"
1631         depends on MMU && !ARM_LPAE
1632         default y
1633         help
1634           Increase kernel security by ensuring that normal kernel accesses
1635           are unable to access userspace addresses.  This can help prevent
1636           use-after-free bugs becoming an exploitable privilege escalation
1637           by ensuring that magic values (such as LIST_POISON) will always
1638           fault when dereferenced.
1639
1640           CPUs with low-vector mappings use a best-efforts implementation.
1641           Their lower 1MB needs to remain accessible for the vectors, but
1642           the remainder of userspace will become appropriately inaccessible.
1643
1644 config HW_PERF_EVENTS
1645         def_bool y
1646         depends on ARM_PMU
1647
1648 config SYS_SUPPORTS_HUGETLBFS
1649        def_bool y
1650        depends on ARM_LPAE
1651
1652 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
1653        def_bool y
1654        depends on ARM_LPAE
1655
1656 config ARCH_WANT_GENERAL_HUGETLB
1657         def_bool y
1658
1659 config ARM_MODULE_PLTS
1660         bool "Use PLTs to allow module memory to spill over into vmalloc area"
1661         depends on MODULES
1662         help
1663           Allocate PLTs when loading modules so that jumps and calls whose
1664           targets are too far away for their relative offsets to be encoded
1665           in the instructions themselves can be bounced via veneers in the
1666           module's PLT. This allows modules to be allocated in the generic
1667           vmalloc area after the dedicated module memory area has been
1668           exhausted. The modules will use slightly more memory, but after
1669           rounding up to page size, the actual memory footprint is usually
1670           the same.
1671
1672           Say y if you are getting out of memory errors while loading modules
1673
1674 source "mm/Kconfig"
1675
1676 config FORCE_MAX_ZONEORDER
1677         int "Maximum zone order"
1678         default "12" if SOC_AM33XX
1679         default "9" if SA1111 || ARCH_EFM32
1680         default "11"
1681         help
1682           The kernel memory allocator divides physically contiguous memory
1683           blocks into "zones", where each zone is a power of two number of
1684           pages.  This option selects the largest power of two that the kernel
1685           keeps in the memory allocator.  If you need to allocate very large
1686           blocks of physically contiguous memory, then you may need to
1687           increase this value.
1688
1689           This config option is actually maximum order plus one. For example,
1690           a value of 11 means that the largest free memory block is 2^10 pages.
1691
1692 config ALIGNMENT_TRAP
1693         bool
1694         depends on CPU_CP15_MMU
1695         default y if !ARCH_EBSA110
1696         select HAVE_PROC_CPU if PROC_FS
1697         help
1698           ARM processors cannot fetch/store information which is not
1699           naturally aligned on the bus, i.e., a 4 byte fetch must start at an
1700           address divisible by 4. On 32-bit ARM processors, these non-aligned
1701           fetch/store instructions will be emulated in software if you say
1702           here, which has a severe performance impact. This is necessary for
1703           correct operation of some network protocols. With an IP-only
1704           configuration it is safe to say N, otherwise say Y.
1705
1706 config UACCESS_WITH_MEMCPY
1707         bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()"
1708         depends on MMU
1709         default y if CPU_FEROCEON
1710         help
1711           Implement faster copy_to_user and clear_user methods for CPU
1712           cores where a 8-word STM instruction give significantly higher
1713           memory write throughput than a sequence of individual 32bit stores.
1714
1715           A possible side effect is a slight increase in scheduling latency
1716           between threads sharing the same address space if they invoke
1717           such copy operations with large buffers.
1718
1719           However, if the CPU data cache is using a write-allocate mode,
1720           this option is unlikely to provide any performance gain.
1721
1722 config SECCOMP
1723         bool
1724         prompt "Enable seccomp to safely compute untrusted bytecode"
1725         ---help---
1726           This kernel feature is useful for number crunching applications
1727           that may need to compute untrusted bytecode during their
1728           execution. By using pipes or other transports made available to
1729           the process as file descriptors supporting the read/write
1730           syscalls, it's possible to isolate those applications in
1731           their own address space using seccomp. Once seccomp is
1732           enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1733           and the task is only allowed to execute a few safe syscalls
1734           defined by each seccomp mode.
1735
1736 config SWIOTLB
1737         def_bool y
1738
1739 config IOMMU_HELPER
1740         def_bool SWIOTLB
1741
1742 config PARAVIRT
1743         bool "Enable paravirtualization code"
1744         help
1745           This changes the kernel so it can modify itself when it is run
1746           under a hypervisor, potentially improving performance significantly
1747           over full virtualization.
1748
1749 config PARAVIRT_TIME_ACCOUNTING
1750         bool "Paravirtual steal time accounting"
1751         select PARAVIRT
1752         default n
1753         help
1754           Select this option to enable fine granularity task steal time
1755           accounting. Time spent executing other tasks in parallel with
1756           the current vCPU is discounted from the vCPU power. To account for
1757           that, there can be a small performance impact.
1758
1759           If in doubt, say N here.
1760
1761 config XEN_DOM0
1762         def_bool y
1763         depends on XEN
1764
1765 config XEN
1766         bool "Xen guest support on ARM"
1767         depends on ARM && AEABI && OF
1768         depends on CPU_V7 && !CPU_V6
1769         depends on !GENERIC_ATOMIC64
1770         depends on MMU
1771         select ARCH_DMA_ADDR_T_64BIT
1772         select ARM_PSCI
1773         select SWIOTLB_XEN
1774         select PARAVIRT
1775         help
1776           Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
1777
1778 endmenu
1779
1780 menu "Boot options"
1781
1782 config USE_OF
1783         bool "Flattened Device Tree support"
1784         select IRQ_DOMAIN
1785         select OF
1786         help
1787           Include support for flattened device tree machine descriptions.
1788
1789 config ATAGS
1790         bool "Support for the traditional ATAGS boot data passing" if USE_OF
1791         default y
1792         help
1793           This is the traditional way of passing data to the kernel at boot
1794           time. If you are solely relying on the flattened device tree (or
1795           the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
1796           to remove ATAGS support from your kernel binary.  If unsure,
1797           leave this to y.
1798
1799 config DEPRECATED_PARAM_STRUCT
1800         bool "Provide old way to pass kernel parameters"
1801         depends on ATAGS
1802         help
1803           This was deprecated in 2001 and announced to live on for 5 years.
1804           Some old boot loaders still use this way.
1805
1806 # Compressed boot loader in ROM.  Yes, we really want to ask about
1807 # TEXT and BSS so we preserve their values in the config files.
1808 config ZBOOT_ROM_TEXT
1809         hex "Compressed ROM boot loader base address"
1810         default "0"
1811         help
1812           The physical address at which the ROM-able zImage is to be
1813           placed in the target.  Platforms which normally make use of
1814           ROM-able zImage formats normally set this to a suitable
1815           value in their defconfig file.
1816
1817           If ZBOOT_ROM is not enabled, this has no effect.
1818
1819 config ZBOOT_ROM_BSS
1820         hex "Compressed ROM boot loader BSS address"
1821         default "0"
1822         help
1823           The base address of an area of read/write memory in the target
1824           for the ROM-able zImage which must be available while the
1825           decompressor is running. It must be large enough to hold the
1826           entire decompressed kernel plus an additional 128 KiB.
1827           Platforms which normally make use of ROM-able zImage formats
1828           normally set this to a suitable value in their defconfig file.
1829
1830           If ZBOOT_ROM is not enabled, this has no effect.
1831
1832 config ZBOOT_ROM
1833         bool "Compressed boot loader in ROM/flash"
1834         depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
1835         depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
1836         help
1837           Say Y here if you intend to execute your compressed kernel image
1838           (zImage) directly from ROM or flash.  If unsure, say N.
1839
1840 config ARM_APPENDED_DTB
1841         bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
1842         depends on OF
1843         help
1844           With this option, the boot code will look for a device tree binary
1845           (DTB) appended to zImage
1846           (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
1847
1848           This is meant as a backward compatibility convenience for those
1849           systems with a bootloader that can't be upgraded to accommodate
1850           the documented boot protocol using a device tree.
1851
1852           Beware that there is very little in terms of protection against
1853           this option being confused by leftover garbage in memory that might
1854           look like a DTB header after a reboot if no actual DTB is appended
1855           to zImage.  Do not leave this option active in a production kernel
1856           if you don't intend to always append a DTB.  Proper passing of the
1857           location into r2 of a bootloader provided DTB is always preferable
1858           to this option.
1859
1860 config ARM_ATAG_DTB_COMPAT
1861         bool "Supplement the appended DTB with traditional ATAG information"
1862         depends on ARM_APPENDED_DTB
1863         help
1864           Some old bootloaders can't be updated to a DTB capable one, yet
1865           they provide ATAGs with memory configuration, the ramdisk address,
1866           the kernel cmdline string, etc.  Such information is dynamically
1867           provided by the bootloader and can't always be stored in a static
1868           DTB.  To allow a device tree enabled kernel to be used with such
1869           bootloaders, this option allows zImage to extract the information
1870           from the ATAG list and store it at run time into the appended DTB.
1871
1872 choice
1873         prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
1874         default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1875
1876 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1877         bool "Use bootloader kernel arguments if available"
1878         help
1879           Uses the command-line options passed by the boot loader instead of
1880           the device tree bootargs property. If the boot loader doesn't provide
1881           any, the device tree bootargs property will be used.
1882
1883 config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
1884         bool "Extend with bootloader kernel arguments"
1885         help
1886           The command-line arguments provided by the boot loader will be
1887           appended to the the device tree bootargs property.
1888
1889 endchoice
1890
1891 config CMDLINE
1892         string "Default kernel command string"
1893         default ""
1894         help
1895           On some architectures (EBSA110 and CATS), there is currently no way
1896           for the boot loader to pass arguments to the kernel. For these
1897           architectures, you should supply some command-line options at build
1898           time by entering them here. As a minimum, you should specify the
1899           memory size and the root device (e.g., mem=64M root=/dev/nfs).
1900
1901 choice
1902         prompt "Kernel command line type" if CMDLINE != ""
1903         default CMDLINE_FROM_BOOTLOADER
1904         depends on ATAGS
1905
1906 config CMDLINE_FROM_BOOTLOADER
1907         bool "Use bootloader kernel arguments if available"
1908         help
1909           Uses the command-line options passed by the boot loader. If
1910           the boot loader doesn't provide any, the default kernel command
1911           string provided in CMDLINE will be used.
1912
1913 config CMDLINE_EXTEND
1914         bool "Extend bootloader kernel arguments"
1915         help
1916           The command-line arguments provided by the boot loader will be
1917           appended to the default kernel command string.
1918
1919 config CMDLINE_FORCE
1920         bool "Always use the default kernel command string"
1921         help
1922           Always use the default kernel command string, even if the boot
1923           loader passes other arguments to the kernel.
1924           This is useful if you cannot or don't want to change the
1925           command-line options your boot loader passes to the kernel.
1926 endchoice
1927
1928 config XIP_KERNEL
1929         bool "Kernel Execute-In-Place from ROM"
1930         depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
1931         help
1932           Execute-In-Place allows the kernel to run from non-volatile storage
1933           directly addressable by the CPU, such as NOR flash. This saves RAM
1934           space since the text section of the kernel is not loaded from flash
1935           to RAM.  Read-write sections, such as the data section and stack,
1936           are still copied to RAM.  The XIP kernel is not compressed since
1937           it has to run directly from flash, so it will take more space to
1938           store it.  The flash address used to link the kernel object files,
1939           and for storing it, is configuration dependent. Therefore, if you
1940           say Y here, you must know the proper physical address where to
1941           store the kernel image depending on your own flash memory usage.
1942
1943           Also note that the make target becomes "make xipImage" rather than
1944           "make zImage" or "make Image".  The final kernel binary to put in
1945           ROM memory will be arch/arm/boot/xipImage.
1946
1947           If unsure, say N.
1948
1949 config XIP_PHYS_ADDR
1950         hex "XIP Kernel Physical Location"
1951         depends on XIP_KERNEL
1952         default "0x00080000"
1953         help
1954           This is the physical address in your flash memory the kernel will
1955           be linked for and stored to.  This address is dependent on your
1956           own flash usage.
1957
1958 config KEXEC
1959         bool "Kexec system call (EXPERIMENTAL)"
1960         depends on (!SMP || PM_SLEEP_SMP)
1961         depends on !CPU_V7M
1962         select KEXEC_CORE
1963         help
1964           kexec is a system call that implements the ability to shutdown your
1965           current kernel, and to start another kernel.  It is like a reboot
1966           but it is independent of the system firmware.   And like a reboot
1967           you can start any kernel with it, not just Linux.
1968
1969           It is an ongoing process to be certain the hardware in a machine
1970           is properly shutdown, so do not be surprised if this code does not
1971           initially work for you.
1972
1973 config ATAGS_PROC
1974         bool "Export atags in procfs"
1975         depends on ATAGS && KEXEC
1976         default y
1977         help
1978           Should the atags used to boot the kernel be exported in an "atags"
1979           file in procfs. Useful with kexec.
1980
1981 config CRASH_DUMP
1982         bool "Build kdump crash kernel (EXPERIMENTAL)"
1983         help
1984           Generate crash dump after being started by kexec. This should
1985           be normally only set in special crash dump kernels which are
1986           loaded in the main kernel with kexec-tools into a specially
1987           reserved region and then later executed after a crash by
1988           kdump/kexec. The crash dump kernel must be compiled to a
1989           memory address not used by the main kernel
1990
1991           For more details see Documentation/kdump/kdump.txt
1992
1993 config AUTO_ZRELADDR
1994         bool "Auto calculation of the decompressed kernel image address"
1995         help
1996           ZRELADDR is the physical address where the decompressed kernel
1997           image will be placed. If AUTO_ZRELADDR is selected, the address
1998           will be determined at run-time by masking the current IP with
1999           0xf8000000. This assumes the zImage being placed in the first 128MB
2000           from start of memory.
2001
2002 config EFI_STUB
2003         bool
2004
2005 config EFI
2006         bool "UEFI runtime support"
2007         depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
2008         select UCS2_STRING
2009         select EFI_PARAMS_FROM_FDT
2010         select EFI_STUB
2011         select EFI_ARMSTUB
2012         select EFI_RUNTIME_WRAPPERS
2013         ---help---
2014           This option provides support for runtime services provided
2015           by UEFI firmware (such as non-volatile variables, realtime
2016           clock, and platform reset). A UEFI stub is also provided to
2017           allow the kernel to be booted as an EFI application. This
2018           is only useful for kernels that may run on systems that have
2019           UEFI firmware.
2020
2021 endmenu
2022
2023 menu "CPU Power Management"
2024
2025 source "drivers/cpufreq/Kconfig"
2026
2027 source "drivers/cpuidle/Kconfig"
2028
2029 endmenu
2030
2031 menu "Floating point emulation"
2032
2033 comment "At least one emulation must be selected"
2034
2035 config FPE_NWFPE
2036         bool "NWFPE math emulation"
2037         depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
2038         ---help---
2039           Say Y to include the NWFPE floating point emulator in the kernel.
2040           This is necessary to run most binaries. Linux does not currently
2041           support floating point hardware so you need to say Y here even if
2042           your machine has an FPA or floating point co-processor podule.
2043
2044           You may say N here if you are going to load the Acorn FPEmulator
2045           early in the bootup.
2046
2047 config FPE_NWFPE_XP
2048         bool "Support extended precision"
2049         depends on FPE_NWFPE
2050         help
2051           Say Y to include 80-bit support in the kernel floating-point
2052           emulator.  Otherwise, only 32 and 64-bit support is compiled in.
2053           Note that gcc does not generate 80-bit operations by default,
2054           so in most cases this option only enlarges the size of the
2055           floating point emulator without any good reason.
2056
2057           You almost surely want to say N here.
2058
2059 config FPE_FASTFPE
2060         bool "FastFPE math emulation (EXPERIMENTAL)"
2061         depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
2062         ---help---
2063           Say Y here to include the FAST floating point emulator in the kernel.
2064           This is an experimental much faster emulator which now also has full
2065           precision for the mantissa.  It does not support any exceptions.
2066           It is very simple, and approximately 3-6 times faster than NWFPE.
2067
2068           It should be sufficient for most programs.  It may be not suitable
2069           for scientific calculations, but you have to check this for yourself.
2070           If you do not feel you need a faster FP emulation you should better
2071           choose NWFPE.
2072
2073 config VFP
2074         bool "VFP-format floating point maths"
2075         depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
2076         help
2077           Say Y to include VFP support code in the kernel. This is needed
2078           if your hardware includes a VFP unit.
2079
2080           Please see <file:Documentation/arm/VFP/release-notes.txt> for
2081           release notes and additional status information.
2082
2083           Say N if your target does not have VFP hardware.
2084
2085 config VFPv3
2086         bool
2087         depends on VFP
2088         default y if CPU_V7
2089
2090 config NEON
2091         bool "Advanced SIMD (NEON) Extension support"
2092         depends on VFPv3 && CPU_V7
2093         help
2094           Say Y to include support code for NEON, the ARMv7 Advanced SIMD
2095           Extension.
2096
2097 config KERNEL_MODE_NEON
2098         bool "Support for NEON in kernel mode"
2099         depends on NEON && AEABI
2100         help
2101           Say Y to include support for NEON in kernel mode.
2102
2103 endmenu
2104
2105 menu "Userspace binary formats"
2106
2107 source "fs/Kconfig.binfmt"
2108
2109 endmenu
2110
2111 menu "Power management options"
2112
2113 source "kernel/power/Kconfig"
2114
2115 config ARCH_SUSPEND_POSSIBLE
2116         depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
2117                 CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
2118         def_bool y
2119
2120 config ARM_CPU_SUSPEND
2121         def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW
2122         depends on ARCH_SUSPEND_POSSIBLE
2123
2124 config ARCH_HIBERNATION_POSSIBLE
2125         bool
2126         depends on MMU
2127         default y if ARCH_SUSPEND_POSSIBLE
2128
2129 endmenu
2130
2131 source "net/Kconfig"
2132
2133 source "drivers/Kconfig"
2134
2135 source "drivers/firmware/Kconfig"
2136
2137 source "fs/Kconfig"
2138
2139 source "arch/arm/Kconfig.debug"
2140
2141 source "security/Kconfig"
2142
2143 source "crypto/Kconfig"
2144 if CRYPTO
2145 source "arch/arm/crypto/Kconfig"
2146 endif
2147
2148 source "lib/Kconfig"
2149
2150 source "arch/arm/kvm/Kconfig"