arch/arm/Kconfig

   1 #
   2 # For a description of the syntax of this configuration file,
   3 # see Documentation/kbuild/kconfig-language.txt.
   4 #
   5
   6 mainmenu "Linux Kernel Configuration"
   7
   8 config ARM
   9         bool
  10         default y
  11         select HAVE_AOUT
  12         select HAVE_IDE
  13         select RTC_LIB
  14         select SYS_SUPPORTS_APM_EMULATION
  15         select HAVE_OPROFILE
  16         select HAVE_ARCH_KGDB
  17         select HAVE_KPROBES if (!XIP_KERNEL)
  18         select HAVE_KRETPROBES if (HAVE_KPROBES)
  19         select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
  20         select HAVE_GENERIC_DMA_COHERENT
  21         help
  22           The ARM series is a line of low-power-consumption RISC chip designs
  23           licensed by ARM Ltd and targeted at embedded applications and
  24           handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
  25           manufactured, but legacy ARM-based PC hardware remains popular in
  26           Europe.  There is an ARM Linux project with a web page at
  27           <http://www.arm.linux.org.uk/>.
  28
  29 config HAVE_PWM
  30         bool
  31
  32 config SYS_SUPPORTS_APM_EMULATION
  33         bool
  34
  35 config GENERIC_GPIO
  36         bool
  37
  38 config GENERIC_TIME
  39         bool
  40
  41 config GENERIC_CLOCKEVENTS
  42         bool
  43
  44 config GENERIC_CLOCKEVENTS_BROADCAST
  45         bool
  46         depends on GENERIC_CLOCKEVENTS
  47         default y if SMP && !LOCAL_TIMERS
  48
  49 config MMU
  50         bool
  51         default y
  52
  53 config NO_IOPORT
  54         bool
  55
  56 config EISA
  57         bool
  58         ---help---
  59           The Extended Industry Standard Architecture (EISA) bus was
  60           developed as an open alternative to the IBM MicroChannel bus.
  61
  62           The EISA bus provided some of the features of the IBM MicroChannel
  63           bus while maintaining backward compatibility with cards made for
  64           the older ISA bus.  The EISA bus saw limited use between 1988 and
  65           1995 when it was made obsolete by the PCI bus.
  66
  67           Say Y here if you are building a kernel for an EISA-based machine.
  68
  69           Otherwise, say N.
  70
  71 config SBUS
  72         bool
  73
  74 config MCA
  75         bool
  76         help
  77           MicroChannel Architecture is found in some IBM PS/2 machines and
  78           laptops.  It is a bus system similar to PCI or ISA. See
  79           <file:Documentation/mca.txt> (and especially the web page given
  80           there) before attempting to build an MCA bus kernel.
  81
  82 config GENERIC_HARDIRQS
  83         bool
  84         default y
  85
  86 config STACKTRACE_SUPPORT
  87         bool
  88         default y
  89
  90 config HAVE_LATENCYTOP_SUPPORT
  91         bool
  92         depends on !SMP
  93         default y
  94
  95 config LOCKDEP_SUPPORT
  96         bool
  97         default y
  98
  99 config TRACE_IRQFLAGS_SUPPORT
 100         bool
 101         default y
 102
 103 config HARDIRQS_SW_RESEND
 104         bool
 105         default y
 106
 107 config GENERIC_IRQ_PROBE
 108         bool
 109         default y
 110
 111 config GENERIC_LOCKBREAK
 112         bool
 113         default y
 114         depends on SMP && PREEMPT
 115
 116 config RWSEM_GENERIC_SPINLOCK
 117         bool
 118         default y
 119
 120 config RWSEM_XCHGADD_ALGORITHM
 121         bool
 122
 123 config ARCH_HAS_ILOG2_U32
 124         bool
 125
 126 config ARCH_HAS_ILOG2_U64
 127         bool
 128
 129 config GENERIC_HWEIGHT
 130         bool
 131         default y
 132
 133 config GENERIC_CALIBRATE_DELAY
 134         bool
 135         default y
 136
 137 config ARCH_MAY_HAVE_PC_FDC
 138         bool
 139
 140 config ZONE_DMA
 141         bool
 142
 143 config GENERIC_ISA_DMA
 144         bool
 145
 146 config FIQ
 147         bool
 148
 149 config ARCH_MTD_XIP
 150         bool
 151
 152 config GENERIC_HARDIRQS_NO__DO_IRQ
 153         def_bool y
 154
 155 if OPROFILE
 156
 157 config OPROFILE_ARMV6
 158         def_bool y
 159         depends on CPU_V6 && !SMP
 160         select OPROFILE_ARM11_CORE
 161
 162 config OPROFILE_MPCORE
 163         def_bool y
 164         depends on CPU_V6 && SMP
 165         select OPROFILE_ARM11_CORE
 166
 167 config OPROFILE_ARM11_CORE
 168         bool
 169
 170 config OPROFILE_ARMV7
 171         def_bool y
 172         depends on CPU_V7 && !SMP
 173         bool
 174
 175 endif
 176
 177 config VECTORS_BASE
 178         hex
 179         default 0xffff0000 if MMU || CPU_HIGH_VECTOR
 180         default DRAM_BASE if REMAP_VECTORS_TO_RAM
 181         default 0x00000000
 182         help
 183           The base address of exception vectors.
 184
 185 source "init/Kconfig"
 186
 187 source "kernel/Kconfig.freezer"
 188
 189 menu "System Type"
 190
 191 choice
 192         prompt "ARM system type"
 193         default ARCH_VERSATILE
 194
 195 config ARCH_AAEC2000
 196         bool "Agilent AAEC-2000 based"
 197         select CPU_ARM920T
 198         select ARM_AMBA
 199         select HAVE_CLK
 200         help
 201           This enables support for systems based on the Agilent AAEC-2000
 202
 203 config ARCH_INTEGRATOR
 204         bool "ARM Ltd. Integrator family"
 205         select ARM_AMBA
 206         select HAVE_CLK
 207         select COMMON_CLKDEV
 208         select ICST525
 209         help
 210           Support for ARM's Integrator platform.
 211
 212 config ARCH_REALVIEW
 213         bool "ARM Ltd. RealView family"
 214         select ARM_AMBA
 215         select HAVE_CLK
 216         select COMMON_CLKDEV
 217         select ICST307
 218         select GENERIC_TIME
 219         select GENERIC_CLOCKEVENTS
 220         help
 221           This enables support for ARM Ltd RealView boards.
 222
 223 config ARCH_VERSATILE
 224         bool "ARM Ltd. Versatile family"
 225         select ARM_AMBA
 226         select ARM_VIC
 227         select HAVE_CLK
 228         select COMMON_CLKDEV
 229         select ICST307
 230         select GENERIC_TIME
 231         select GENERIC_CLOCKEVENTS
 232         help
 233           This enables support for ARM Ltd Versatile board.
 234
 235 config ARCH_AT91
 236         bool "Atmel AT91"
 237         select GENERIC_GPIO
 238         select ARCH_REQUIRE_GPIOLIB
 239         select HAVE_CLK
 240         help
 241           This enables support for systems based on the Atmel AT91RM9200,
 242           AT91SAM9 and AT91CAP9 processors.
 243
 244 config ARCH_CLPS711X
 245         bool "Cirrus Logic CLPS711x/EP721x-based"
 246         select CPU_ARM720T
 247         help
 248           Support for Cirrus Logic 711x/721x based boards.
 249
 250 config ARCH_GEMINI
 251         bool "Cortina Systems Gemini"
 252         select CPU_FA526
 253         select GENERIC_GPIO
 254         select ARCH_REQUIRE_GPIOLIB
 255         help
 256           Support for the Cortina Systems Gemini family SoCs
 257
 258 config ARCH_EBSA110
 259         bool "EBSA-110"
 260         select CPU_SA110
 261         select ISA
 262         select NO_IOPORT
 263         help
 264           This is an evaluation board for the StrongARM processor available
 265           from Digital. It has limited hardware on-board, including an
 266           Ethernet interface, two PCMCIA sockets, two serial ports and a
 267           parallel port.
 268
 269 config ARCH_EP93XX
 270         bool "EP93xx-based"
 271         select CPU_ARM920T
 272         select ARM_AMBA
 273         select ARM_VIC
 274         select GENERIC_GPIO
 275         select HAVE_CLK
 276         select COMMON_CLKDEV
 277         select ARCH_REQUIRE_GPIOLIB
 278         select ARCH_HAS_HOLES_MEMORYMODEL
 279         help
 280           This enables support for the Cirrus EP93xx series of CPUs.
 281
 282 config ARCH_FOOTBRIDGE
 283         bool "FootBridge"
 284         select CPU_SA110
 285         select FOOTBRIDGE
 286         help
 287           Support for systems based on the DC21285 companion chip
 288           ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 289
 290 config ARCH_MXC
 291         bool "Freescale MXC/iMX-based"
 292         select GENERIC_TIME
 293         select GENERIC_CLOCKEVENTS
 294         select ARCH_MTD_XIP
 295         select GENERIC_GPIO
 296         select ARCH_REQUIRE_GPIOLIB
 297         select HAVE_CLK
 298         help
 299           Support for Freescale MXC/iMX-based family of processors
 300
 301 config ARCH_STMP3XXX
 302         bool "Freescale STMP3xxx"
 303         select CPU_ARM926T
 304         select HAVE_CLK
 305         select COMMON_CLKDEV
 306         select ARCH_REQUIRE_GPIOLIB
 307         select GENERIC_TIME
 308         select GENERIC_CLOCKEVENTS
 309         select GENERIC_GPIO
 310         select USB_ARCH_HAS_EHCI
 311         help
 312           Support for systems based on the Freescale 3xxx CPUs.
 313
 314 config ARCH_NETX
 315         bool "Hilscher NetX based"
 316         select CPU_ARM926T
 317         select ARM_VIC
 318         select GENERIC_CLOCKEVENTS
 319         select GENERIC_TIME
 320         help
 321           This enables support for systems based on the Hilscher NetX Soc
 322
 323 config ARCH_H720X
 324         bool "Hynix HMS720x-based"
 325         select CPU_ARM720T
 326         select ISA_DMA_API
 327         help
 328           This enables support for systems based on the Hynix HMS720x
 329
 330 config ARCH_IOP13XX
 331         bool "IOP13xx-based"
 332         depends on MMU
 333         select CPU_XSC3
 334         select PLAT_IOP
 335         select PCI
 336         select ARCH_SUPPORTS_MSI
 337         select VMSPLIT_1G
 338         help
 339           Support for Intel's IOP13XX (XScale) family of processors.
 340
 341 config ARCH_IOP32X
 342         bool "IOP32x-based"
 343         depends on MMU
 344         select CPU_XSCALE
 345         select PLAT_IOP
 346         select PCI
 347         select GENERIC_GPIO
 348         select ARCH_REQUIRE_GPIOLIB
 349         help
 350           Support for Intel's 80219 and IOP32X (XScale) family of
 351           processors.
 352
 353 config ARCH_IOP33X
 354         bool "IOP33x-based"
 355         depends on MMU
 356         select CPU_XSCALE
 357         select PLAT_IOP
 358         select PCI
 359         select GENERIC_GPIO
 360         select ARCH_REQUIRE_GPIOLIB
 361         help
 362           Support for Intel's IOP33X (XScale) family of processors.
 363
 364 config ARCH_IXP23XX
 365         bool "IXP23XX-based"
 366         depends on MMU
 367         select CPU_XSC3
 368         select PCI
 369         help
 370           Support for Intel's IXP23xx (XScale) family of processors.
 371
 372 config ARCH_IXP2000
 373         bool "IXP2400/2800-based"
 374         depends on MMU
 375         select CPU_XSCALE
 376         select PCI
 377         help
 378           Support for Intel's IXP2400/2800 (XScale) family of processors.
 379
 380 config ARCH_IXP4XX
 381         bool "IXP4xx-based"
 382         depends on MMU
 383         select CPU_XSCALE
 384         select GENERIC_GPIO
 385         select GENERIC_TIME
 386         select GENERIC_CLOCKEVENTS
 387         select DMABOUNCE if PCI
 388         help
 389           Support for Intel's IXP4XX (XScale) family of processors.
 390
 391 config ARCH_L7200
 392         bool "LinkUp-L7200"
 393         select CPU_ARM720T
 394         select FIQ
 395         help
 396           Say Y here if you intend to run this kernel on a LinkUp Systems
 397           L7200 Software Development Board which uses an ARM720T processor.
 398           Information on this board can be obtained at:
 399
 400           <http://www.linkupsys.com/>
 401
 402           If you have any questions or comments about the Linux kernel port
 403           to this board, send e-mail to <sjhill@cotw.com>.
 404
 405 config ARCH_KIRKWOOD
 406         bool "Marvell Kirkwood"
 407         select CPU_FEROCEON
 408         select PCI
 409         select GENERIC_GPIO
 410         select ARCH_REQUIRE_GPIOLIB
 411         select GENERIC_TIME
 412         select GENERIC_CLOCKEVENTS
 413         select PLAT_ORION
 414         help
 415           Support for the following Marvell Kirkwood series SoCs:
 416           88F6180, 88F6192 and 88F6281.
 417
 418 config ARCH_LOKI
 419         bool "Marvell Loki (88RC8480)"
 420         select CPU_FEROCEON
 421         select GENERIC_TIME
 422         select GENERIC_CLOCKEVENTS
 423         select PLAT_ORION
 424         help
 425           Support for the Marvell Loki (88RC8480) SoC.
 426
 427 config ARCH_MV78XX0
 428         bool "Marvell MV78xx0"
 429         select CPU_FEROCEON
 430         select PCI
 431         select GENERIC_GPIO
 432         select ARCH_REQUIRE_GPIOLIB
 433         select GENERIC_TIME
 434         select GENERIC_CLOCKEVENTS
 435         select PLAT_ORION
 436         help
 437           Support for the following Marvell MV78xx0 series SoCs:
 438           MV781x0, MV782x0.
 439
 440 config ARCH_ORION5X
 441         bool "Marvell Orion"
 442         depends on MMU
 443         select CPU_FEROCEON
 444         select PCI
 445         select GENERIC_GPIO
 446         select ARCH_REQUIRE_GPIOLIB
 447         select GENERIC_TIME
 448         select GENERIC_CLOCKEVENTS
 449         select PLAT_ORION
 450         help
 451           Support for the following Marvell Orion 5x series SoCs:
 452           Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
 453           Orion-2 (5281), Orion-1-90 (6183).
 454
 455 config ARCH_MMP
 456         bool "Marvell PXA168/910"
 457         depends on MMU
 458         select GENERIC_GPIO
 459         select ARCH_REQUIRE_GPIOLIB
 460         select HAVE_CLK
 461         select COMMON_CLKDEV
 462         select GENERIC_TIME
 463         select GENERIC_CLOCKEVENTS
 464         select TICK_ONESHOT
 465         select PLAT_PXA
 466         help
 467           Support for Marvell's PXA168/910 processor line.
 468
 469 config ARCH_KS8695
 470         bool "Micrel/Kendin KS8695"
 471         select CPU_ARM922T
 472         select GENERIC_GPIO
 473         select ARCH_REQUIRE_GPIOLIB
 474         help
 475           Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 476           System-on-Chip devices.
 477
 478 config ARCH_NS9XXX
 479         bool "NetSilicon NS9xxx"
 480         select CPU_ARM926T
 481         select GENERIC_GPIO
 482         select GENERIC_TIME
 483         select GENERIC_CLOCKEVENTS
 484         select HAVE_CLK
 485         help
 486           Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
 487           System.
 488
 489           <http://www.digi.com/products/microprocessors/index.jsp>
 490
 491 config ARCH_W90X900
 492         bool "Nuvoton W90X900 CPU"
 493         select CPU_ARM926T
 494         select ARCH_REQUIRE_GPIOLIB
 495         select GENERIC_GPIO
 496         select COMMON_CLKDEV
 497         help
 498                 Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
 499                 can login www.mcuos.com or www.nuvoton.com to know more.
 500
 501 config ARCH_PNX4008
 502         bool "Philips Nexperia PNX4008 Mobile"
 503         select CPU_ARM926T
 504         select HAVE_CLK
 505         help
 506           This enables support for Philips PNX4008 mobile platform.
 507
 508 config ARCH_PXA
 509         bool "PXA2xx/PXA3xx-based"
 510         depends on MMU
 511         select ARCH_MTD_XIP
 512         select GENERIC_GPIO
 513         select HAVE_CLK
 514         select COMMON_CLKDEV
 515         select ARCH_REQUIRE_GPIOLIB
 516         select GENERIC_TIME
 517         select GENERIC_CLOCKEVENTS
 518         select TICK_ONESHOT
 519         select PLAT_PXA
 520         help
 521           Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 522
 523 config ARCH_MSM
 524         bool "Qualcomm MSM"
 525         select CPU_V6
 526         select GENERIC_TIME
 527         select GENERIC_CLOCKEVENTS
 528         help
 529           Support for Qualcomm MSM7K based systems.  This runs on the ARM11
 530           apps processor of the MSM7K and depends on a shared memory
 531           interface to the ARM9 modem processor which runs the baseband stack
 532           and controls some vital subsystems (clock and power control, etc).
 533
 534 config ARCH_RPC
 535         bool "RiscPC"
 536         select ARCH_ACORN
 537         select FIQ
 538         select TIMER_ACORN
 539         select ARCH_MAY_HAVE_PC_FDC
 540         select HAVE_PATA_PLATFORM
 541         select ISA_DMA_API
 542         select NO_IOPORT
 543         select ARCH_SPARSEMEM_ENABLE
 544         help
 545           On the Acorn Risc-PC, Linux can support the internal IDE disk and
 546           CD-ROM interface, serial and parallel port, and the floppy drive.
 547
 548 config ARCH_SA1100
 549         bool "SA1100-based"
 550         select CPU_SA1100
 551         select ISA
 552         select ARCH_SPARSEMEM_ENABLE
 553         select ARCH_MTD_XIP
 554         select GENERIC_GPIO
 555         select GENERIC_TIME
 556         select GENERIC_CLOCKEVENTS
 557         select HAVE_CLK
 558         select TICK_ONESHOT
 559         select ARCH_REQUIRE_GPIOLIB
 560         help
 561           Support for StrongARM 11x0 based boards.
 562
 563 config ARCH_S3C2410
 564         bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 565         select GENERIC_GPIO
 566         select HAVE_CLK
 567         help
 568           Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 569           BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
 570           the Samsung SMDK2410 development board (and derivatives).
 571
 572 config ARCH_S3C64XX
 573         bool "Samsung S3C64XX"
 574         select GENERIC_GPIO
 575         select HAVE_CLK
 576         help
 577           Samsung S3C64XX series based systems
 578
 579 config ARCH_SHARK
 580         bool "Shark"
 581         select CPU_SA110
 582         select ISA
 583         select ISA_DMA
 584         select ZONE_DMA
 585         select PCI
 586         help
 587           Support for the StrongARM based Digital DNARD machine, also known
 588           as "Shark" (<http://www.shark-linux.de/shark.html>).
 589
 590 config ARCH_LH7A40X
 591         bool "Sharp LH7A40X"
 592         select CPU_ARM922T
 593         select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 594         select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 595         help
 596           Say Y here for systems based on one of the Sharp LH7A40X
 597           System on a Chip processors.  These CPUs include an ARM922T
 598           core with a wide array of integrated devices for
 599           hand-held and low-power applications.
 600
 601 config ARCH_U300
 602         bool "ST-Ericsson U300 Series"
 603         depends on MMU
 604         select CPU_ARM926T
 605         select ARM_AMBA
 606         select ARM_VIC
 607         select GENERIC_TIME
 608         select GENERIC_CLOCKEVENTS
 609         select HAVE_CLK
 610         select COMMON_CLKDEV
 611         select GENERIC_GPIO
 612         help
 613           Support for ST-Ericsson U300 series mobile platforms.
 614
 615 config ARCH_DAVINCI
 616         bool "TI DaVinci"
 617         select CPU_ARM926T
 618         select GENERIC_TIME
 619         select GENERIC_CLOCKEVENTS
 620         select GENERIC_GPIO
 621         select ARCH_REQUIRE_GPIOLIB
 622         select HAVE_CLK
 623         select ZONE_DMA
 624         select HAVE_IDE
 625         select COMMON_CLKDEV
 626         select GENERIC_ALLOCATOR
 627         help
 628           Support for TI's DaVinci platform.
 629
 630 config ARCH_OMAP
 631         bool "TI OMAP"
 632         select GENERIC_GPIO
 633         select HAVE_CLK
 634         select ARCH_REQUIRE_GPIOLIB
 635         select GENERIC_TIME
 636         select GENERIC_CLOCKEVENTS
 637         help
 638           Support for TI's OMAP platform (OMAP1 and OMAP2).
 639
 640 endchoice
 641
 642 source "arch/arm/mach-clps711x/Kconfig"
 643
 644 source "arch/arm/mach-ep93xx/Kconfig"
 645
 646 source "arch/arm/mach-footbridge/Kconfig"
 647
 648 source "arch/arm/mach-gemini/Kconfig"
 649
 650 source "arch/arm/mach-integrator/Kconfig"
 651
 652 source "arch/arm/mach-iop32x/Kconfig"
 653
 654 source "arch/arm/mach-iop33x/Kconfig"
 655
 656 source "arch/arm/mach-iop13xx/Kconfig"
 657
 658 source "arch/arm/mach-ixp4xx/Kconfig"
 659
 660 source "arch/arm/mach-ixp2000/Kconfig"
 661
 662 source "arch/arm/mach-ixp23xx/Kconfig"
 663
 664 source "arch/arm/mach-loki/Kconfig"
 665
 666 source "arch/arm/mach-mv78xx0/Kconfig"
 667
 668 source "arch/arm/mach-pxa/Kconfig"
 669 source "arch/arm/plat-pxa/Kconfig"
 670
 671 source "arch/arm/mach-mmp/Kconfig"
 672
 673 source "arch/arm/mach-sa1100/Kconfig"
 674
 675 source "arch/arm/plat-omap/Kconfig"
 676
 677 source "arch/arm/mach-omap1/Kconfig"
 678
 679 source "arch/arm/mach-omap2/Kconfig"
 680
 681 source "arch/arm/mach-orion5x/Kconfig"
 682
 683 source "arch/arm/mach-kirkwood/Kconfig"
 684
 685 source "arch/arm/plat-s3c24xx/Kconfig"
 686 source "arch/arm/plat-s3c64xx/Kconfig"
 687 source "arch/arm/plat-s3c/Kconfig"
 688
 689 if ARCH_S3C2410
 690 source "arch/arm/mach-s3c2400/Kconfig"
 691 source "arch/arm/mach-s3c2410/Kconfig"
 692 source "arch/arm/mach-s3c2412/Kconfig"
 693 source "arch/arm/mach-s3c2440/Kconfig"
 694 source "arch/arm/mach-s3c2442/Kconfig"
 695 source "arch/arm/mach-s3c2443/Kconfig"
 696 endif
 697
 698 if ARCH_S3C64XX
 699 source "arch/arm/mach-s3c6400/Kconfig"
 700 source "arch/arm/mach-s3c6410/Kconfig"
 701 endif
 702
 703 source "arch/arm/plat-stmp3xxx/Kconfig"
 704
 705 source "arch/arm/mach-lh7a40x/Kconfig"
 706
 707 source "arch/arm/mach-h720x/Kconfig"
 708
 709 source "arch/arm/mach-versatile/Kconfig"
 710
 711 source "arch/arm/mach-aaec2000/Kconfig"
 712
 713 source "arch/arm/mach-realview/Kconfig"
 714
 715 source "arch/arm/mach-at91/Kconfig"
 716
 717 source "arch/arm/plat-mxc/Kconfig"
 718
 719 source "arch/arm/mach-netx/Kconfig"
 720
 721 source "arch/arm/mach-ns9xxx/Kconfig"
 722
 723 source "arch/arm/mach-davinci/Kconfig"
 724
 725 source "arch/arm/mach-ks8695/Kconfig"
 726
 727 source "arch/arm/mach-msm/Kconfig"
 728
 729 source "arch/arm/mach-u300/Kconfig"
 730
 731 source "arch/arm/mach-w90x900/Kconfig"
 732
 733 # Definitions to make life easier
 734 config ARCH_ACORN
 735         bool
 736
 737 config PLAT_IOP
 738         bool
 739
 740 config PLAT_ORION
 741         bool
 742
 743 config PLAT_PXA
 744         bool
 745
 746 source arch/arm/mm/Kconfig
 747
 748 config IWMMXT
 749         bool "Enable iWMMXt support"
 750         depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
 751         default y if PXA27x || PXA3xx || ARCH_MMP
 752         help
 753           Enable support for iWMMXt context switching at run time if
 754           running on a CPU that supports it.
 755
 756 #  bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
 757 config XSCALE_PMU
 758         bool
 759         depends on CPU_XSCALE && !XSCALE_PMU_TIMER
 760         default y
 761
 762 if !MMU
 763 source "arch/arm/Kconfig-nommu"
 764 endif
 765
 766 config ARM_ERRATA_411920
 767         bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 768         depends on CPU_V6 && !SMP
 769         help
 770           Invalidation of the Instruction Cache operation can
 771           fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
 772           It does not affect the MPCore. This option enables the ARM Ltd.
 773           recommended workaround.
 774
 775 config ARM_ERRATA_430973
 776         bool "ARM errata: Stale prediction on replaced interworking branch"
 777         depends on CPU_V7
 778         help
 779           This option enables the workaround for the 430973 Cortex-A8
 780           (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
 781           interworking branch is replaced with another code sequence at the
 782           same virtual address, whether due to self-modifying code or virtual
 783           to physical address re-mapping, Cortex-A8 does not recover from the
 784           stale interworking branch prediction. This results in Cortex-A8
 785           executing the new code sequence in the incorrect ARM or Thumb state.
 786           The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
 787           and also flushes the branch target cache at every context switch.
 788           Note that setting specific bits in the ACTLR register may not be
 789           available in non-secure mode.
 790
 791 config ARM_ERRATA_458693
 792         bool "ARM errata: Processor deadlock when a false hazard is created"
 793         depends on CPU_V7
 794         help
 795           This option enables the workaround for the 458693 Cortex-A8 (r2p0)
 796           erratum. For very specific sequences of memory operations, it is
 797           possible for a hazard condition intended for a cache line to instead
 798           be incorrectly associated with a different cache line. This false
 799           hazard might then cause a processor deadlock. The workaround enables
 800           the L1 caching of the NEON accesses and disables the PLD instruction
 801           in the ACTLR register. Note that setting specific bits in the ACTLR
 802           register may not be available in non-secure mode.
 803
 804 config ARM_ERRATA_460075
 805         bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
 806         depends on CPU_V7
 807         help
 808           This option enables the workaround for the 460075 Cortex-A8 (r2p0)
 809           erratum. Any asynchronous access to the L2 cache may encounter a
 810           situation in which recent store transactions to the L2 cache are lost
 811           and overwritten with stale memory contents from external memory. The
 812           workaround disables the write-allocate mode for the L2 cache via the
 813           ACTLR register. Note that setting specific bits in the ACTLR register
 814           may not be available in non-secure mode.
 815
 816 endmenu
 817
 818 source "arch/arm/common/Kconfig"
 819
 820 config FORCE_MAX_ZONEORDER
 821         int
 822         depends on SA1111
 823         default "9"
 824
 825 menu "Bus support"
 826
 827 config ARM_AMBA
 828         bool
 829
 830 config ISA
 831         bool
 832         help
 833           Find out whether you have ISA slots on your motherboard.  ISA is the
 834           name of a bus system, i.e. the way the CPU talks to the other stuff
 835           inside your box.  Other bus systems are PCI, EISA, MicroChannel
 836           (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 837           newer boards don't support it.  If you have ISA, say Y, otherwise N.
 838
 839 # Select ISA DMA controller support
 840 config ISA_DMA
 841         bool
 842         select ISA_DMA_API
 843
 844 # Select ISA DMA interface
 845 config ISA_DMA_API
 846         bool
 847
 848 config PCI
 849         bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
 850         help
 851           Find out whether you have a PCI motherboard. PCI is the name of a
 852           bus system, i.e. the way the CPU talks to the other stuff inside
 853           your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 854           VESA. If you have PCI, say Y, otherwise N.
 855
 856 config PCI_SYSCALL
 857         def_bool PCI
 858
 859 # Select the host bridge type
 860 config PCI_HOST_VIA82C505
 861         bool
 862         depends on PCI && ARCH_SHARK
 863         default y
 864
 865 config PCI_HOST_ITE8152
 866         bool
 867         depends on PCI && MACH_ARMCORE
 868         default y
 869         select DMABOUNCE
 870
 871 source "drivers/pci/Kconfig"
 872
 873 source "drivers/pcmcia/Kconfig"
 874
 875 endmenu
 876
 877 menu "Kernel Features"
 878
 879 source "kernel/time/Kconfig"
 880
 881 config SMP
 882         bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 883         depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
 884                  MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
 885         depends on GENERIC_CLOCKEVENTS
 886         select USE_GENERIC_SMP_HELPERS
 887         select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
 888         help
 889           This enables support for systems with more than one CPU. If you have
 890           a system with only one CPU, like most personal computers, say N. If
 891           you have a system with more than one CPU, say Y.
 892
 893           If you say N here, the kernel will run on single and multiprocessor
 894           machines, but will use only one CPU of a multiprocessor machine. If
 895           you say Y here, the kernel will run on many, but not all, single
 896           processor machines. On a single processor machine, the kernel will
 897           run faster if you say N here.
 898
 899           See also <file:Documentation/i386/IO-APIC.txt>,
 900           <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
 901           <http://www.linuxdoc.org/docs.html#howto>.
 902
 903           If you don't know what to do here, say N.
 904
 905 config HAVE_ARM_SCU
 906         bool
 907         depends on SMP
 908         help
 909           This option enables support for the ARM system coherency unit
 910
 911 config HAVE_ARM_TWD
 912         bool
 913         depends on SMP
 914         help
 915           This options enables support for the ARM timer and watchdog unit
 916
 917 choice
 918         prompt "Memory split"
 919         default VMSPLIT_3G
 920         help
 921           Select the desired split between kernel and user memory.
 922
 923           If you are not absolutely sure what you are doing, leave this
 924           option alone!
 925
 926         config VMSPLIT_3G
 927                 bool "3G/1G user/kernel split"
 928         config VMSPLIT_2G
 929                 bool "2G/2G user/kernel split"
 930         config VMSPLIT_1G
 931                 bool "1G/3G user/kernel split"
 932 endchoice
 933
 934 config PAGE_OFFSET
 935         hex
 936         default 0x40000000 if VMSPLIT_1G
 937         default 0x80000000 if VMSPLIT_2G
 938         default 0xC0000000
 939
 940 config NR_CPUS
 941         int "Maximum number of CPUs (2-32)"
 942         range 2 32
 943         depends on SMP
 944         default "4"
 945
 946 config HOTPLUG_CPU
 947         bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
 948         depends on SMP && HOTPLUG && EXPERIMENTAL
 949         help
 950           Say Y here to experiment with turning CPUs off and on.  CPUs
 951           can be controlled through /sys/devices/system/cpu.
 952
 953 config LOCAL_TIMERS
 954         bool "Use local timer interrupts"
 955         depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
 956                 REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
 957         default y
 958         select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
 959         help
 960           Enable support for local timers on SMP platforms, rather then the
 961           legacy IPI broadcast method.  Local timers allows the system
 962           accounting to be spread across the timer interval, preventing a
 963           "thundering herd" at every timer tick.
 964
 965 config PREEMPT
 966         bool "Preemptible Kernel (EXPERIMENTAL)"
 967         depends on EXPERIMENTAL
 968         help
 969           This option reduces the latency of the kernel when reacting to
 970           real-time or interactive events by allowing a low priority process to
 971           be preempted even if it is in kernel mode executing a system call.
 972           This allows applications to run more reliably even when the system is
 973           under load.
 974
 975           Say Y here if you are building a kernel for a desktop, embedded
 976           or real-time system.  Say N if you are unsure.
 977
 978 config HZ
 979         int
 980         default 128 if ARCH_L7200
 981         default 200 if ARCH_EBSA110 || ARCH_S3C2410
 982         default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 983         default AT91_TIMER_HZ if ARCH_AT91
 984         default 100
 985
 986 config AEABI
 987         bool "Use the ARM EABI to compile the kernel"
 988         help
 989           This option allows for the kernel to be compiled using the latest
 990           ARM ABI (aka EABI).  This is only useful if you are using a user
 991           space environment that is also compiled with EABI.
 992
 993           Since there are major incompatibilities between the legacy ABI and
 994           EABI, especially with regard to structure member alignment, this
 995           option also changes the kernel syscall calling convention to
 996           disambiguate both ABIs and allow for backward compatibility support
 997           (selected with CONFIG_OABI_COMPAT).
 998
 999           To use this you need GCC version 4.0.0 or later.
1000
1001 config OABI_COMPAT
1002         bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
1003         depends on AEABI && EXPERIMENTAL
1004         default y
1005         help
1006           This option preserves the old syscall interface along with the
1007           new (ARM EABI) one. It also provides a compatibility layer to
1008           intercept syscalls that have structure arguments which layout
1009           in memory differs between the legacy ABI and the new ARM EABI
1010           (only for non "thumb" binaries). This option adds a tiny
1011           overhead to all syscalls and produces a slightly larger kernel.
1012           If you know you'll be using only pure EABI user space then you
1013           can say N here. If this option is not selected and you attempt
1014           to execute a legacy ABI binary then the result will be
1015           UNPREDICTABLE (in fact it can be predicted that it won't work
1016           at all). If in doubt say Y.
1017
1018 config ARCH_HAS_HOLES_MEMORYMODEL
1019         bool
1020
1021 # Discontigmem is deprecated
1022 config ARCH_DISCONTIGMEM_ENABLE
1023         bool
1024
1025 config ARCH_SPARSEMEM_ENABLE
1026         bool
1027
1028 config ARCH_SPARSEMEM_DEFAULT
1029         def_bool ARCH_SPARSEMEM_ENABLE
1030
1031 config ARCH_SELECT_MEMORY_MODEL
1032         def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
1033
1034 config NODES_SHIFT
1035         int
1036         default "4" if ARCH_LH7A40X
1037         default "2"
1038         depends on NEED_MULTIPLE_NODES
1039
1040 config HIGHMEM
1041         bool "High Memory Support (EXPERIMENTAL)"
1042         depends on MMU && EXPERIMENTAL
1043         help
1044           The address space of ARM processors is only 4 Gigabytes large
1045           and it has to accommodate user address space, kernel address
1046           space as well as some memory mapped IO. That means that, if you
1047           have a large amount of physical memory and/or IO, not all of the
1048           memory can be "permanently mapped" by the kernel. The physical
1049           memory that is not permanently mapped is called "high memory".
1050
1051           Depending on the selected kernel/user memory split, minimum
1052           vmalloc space and actual amount of RAM, you may not need this
1053           option which should result in a slightly faster kernel.
1054
1055           If unsure, say n.
1056
1057 source "mm/Kconfig"
1058
1059 config LEDS
1060         bool "Timer and CPU usage LEDs"
1061         depends on ARCH_CDB89712 || ARCH_EBSA110 || \
1062                    ARCH_EBSA285 || ARCH_INTEGRATOR || \
1063                    ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
1064                    ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
1065                    ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
1066                    ARCH_AT91 || ARCH_DAVINCI || \
1067                    ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
1068         help
1069           If you say Y here, the LEDs on your machine will be used
1070           to provide useful information about your current system status.
1071
1072           If you are compiling a kernel for a NetWinder or EBSA-285, you will
1073           be able to select which LEDs are active using the options below. If
1074           you are compiling a kernel for the EBSA-110 or the LART however, the
1075           red LED will simply flash regularly to indicate that the system is
1076           still functional. It is safe to say Y here if you have a CATS
1077           system, but the driver will do nothing.
1078
1079 config LEDS_TIMER
1080         bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
1081                             OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
1082                             || MACH_OMAP_PERSEUS2
1083         depends on LEDS
1084         depends on !GENERIC_CLOCKEVENTS
1085         default y if ARCH_EBSA110
1086         help
1087           If you say Y here, one of the system LEDs (the green one on the
1088           NetWinder, the amber one on the EBSA285, or the red one on the LART)
1089           will flash regularly to indicate that the system is still
1090           operational. This is mainly useful to kernel hackers who are
1091           debugging unstable kernels.
1092
1093           The LART uses the same LED for both Timer LED and CPU usage LED
1094           functions. You may choose to use both, but the Timer LED function
1095           will overrule the CPU usage LED.
1096
1097 config LEDS_CPU
1098         bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
1099                         !ARCH_OMAP) \
1100                         || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
1101                         || MACH_OMAP_PERSEUS2
1102         depends on LEDS
1103         help
1104           If you say Y here, the red LED will be used to give a good real
1105           time indication of CPU usage, by lighting whenever the idle task
1106           is not currently executing.
1107
1108           The LART uses the same LED for both Timer LED and CPU usage LED
1109           functions. You may choose to use both, but the Timer LED function
1110           will overrule the CPU usage LED.
1111
1112 config ALIGNMENT_TRAP
1113         bool
1114         depends on CPU_CP15_MMU
1115         default y if !ARCH_EBSA110
1116         help
1117           ARM processors cannot fetch/store information which is not
1118           naturally aligned on the bus, i.e., a 4 byte fetch must start at an
1119           address divisible by 4. On 32-bit ARM processors, these non-aligned
1120           fetch/store instructions will be emulated in software if you say
1121           here, which has a severe performance impact. This is necessary for
1122           correct operation of some network protocols. With an IP-only
1123           configuration it is safe to say N, otherwise say Y.
1124
1125 config UACCESS_WITH_MEMCPY
1126         bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
1127         depends on MMU && EXPERIMENTAL
1128         default y if CPU_FEROCEON
1129         help
1130           Implement faster copy_to_user and clear_user methods for CPU
1131           cores where a 8-word STM instruction give significantly higher
1132           memory write throughput than a sequence of individual 32bit stores.
1133
1134           A possible side effect is a slight increase in scheduling latency
1135           between threads sharing the same address space if they invoke
1136           such copy operations with large buffers.
1137
1138           However, if the CPU data cache is using a write-allocate mode,
1139           this option is unlikely to provide any performance gain.
1140
1141 endmenu
1142
1143 menu "Boot options"
1144
1145 # Compressed boot loader in ROM.  Yes, we really want to ask about
1146 # TEXT and BSS so we preserve their values in the config files.
1147 config ZBOOT_ROM_TEXT
1148         hex "Compressed ROM boot loader base address"
1149         default "0"
1150         help
1151           The physical address at which the ROM-able zImage is to be
1152           placed in the target.  Platforms which normally make use of
1153           ROM-able zImage formats normally set this to a suitable
1154           value in their defconfig file.
1155
1156           If ZBOOT_ROM is not enabled, this has no effect.
1157
1158 config ZBOOT_ROM_BSS
1159         hex "Compressed ROM boot loader BSS address"
1160         default "0"
1161         help
1162           The base address of an area of read/write memory in the target
1163           for the ROM-able zImage which must be available while the
1164           decompressor is running. It must be large enough to hold the
1165           entire decompressed kernel plus an additional 128 KiB.
1166           Platforms which normally make use of ROM-able zImage formats
1167           normally set this to a suitable value in their defconfig file.
1168
1169           If ZBOOT_ROM is not enabled, this has no effect.
1170
1171 config ZBOOT_ROM
1172         bool "Compressed boot loader in ROM/flash"
1173         depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
1174         help
1175           Say Y here if you intend to execute your compressed kernel image
1176           (zImage) directly from ROM or flash.  If unsure, say N.
1177
1178 config CMDLINE
1179         string "Default kernel command string"
1180         default ""
1181         help
1182           On some architectures (EBSA110 and CATS), there is currently no way
1183           for the boot loader to pass arguments to the kernel. For these
1184           architectures, you should supply some command-line options at build
1185           time by entering them here. As a minimum, you should specify the
1186           memory size and the root device (e.g., mem=64M root=/dev/nfs).
1187
1188 config XIP_KERNEL
1189         bool "Kernel Execute-In-Place from ROM"
1190         depends on !ZBOOT_ROM
1191         help
1192           Execute-In-Place allows the kernel to run from non-volatile storage
1193           directly addressable by the CPU, such as NOR flash. This saves RAM
1194           space since the text section of the kernel is not loaded from flash
1195           to RAM.  Read-write sections, such as the data section and stack,
1196           are still copied to RAM.  The XIP kernel is not compressed since
1197           it has to run directly from flash, so it will take more space to
1198           store it.  The flash address used to link the kernel object files,
1199           and for storing it, is configuration dependent. Therefore, if you
1200           say Y here, you must know the proper physical address where to
1201           store the kernel image depending on your own flash memory usage.
1202
1203           Also note that the make target becomes "make xipImage" rather than
1204           "make zImage" or "make Image".  The final kernel binary to put in
1205           ROM memory will be arch/arm/boot/xipImage.
1206
1207           If unsure, say N.
1208
1209 config XIP_PHYS_ADDR
1210         hex "XIP Kernel Physical Location"
1211         depends on XIP_KERNEL
1212         default "0x00080000"
1213         help
1214           This is the physical address in your flash memory the kernel will
1215           be linked for and stored to.  This address is dependent on your
1216           own flash usage.
1217
1218 config KEXEC
1219         bool "Kexec system call (EXPERIMENTAL)"
1220         depends on EXPERIMENTAL
1221         help
1222           kexec is a system call that implements the ability to shutdown your
1223           current kernel, and to start another kernel.  It is like a reboot
1224           but it is independent of the system firmware.   And like a reboot
1225           you can start any kernel with it, not just Linux.
1226
1227           It is an ongoing process to be certain the hardware in a machine
1228           is properly shutdown, so do not be surprised if this code does not
1229           initially work for you.  It may help to enable device hotplugging
1230           support.
1231
1232 config ATAGS_PROC
1233         bool "Export atags in procfs"
1234         depends on KEXEC
1235         default y
1236         help
1237           Should the atags used to boot the kernel be exported in an "atags"
1238           file in procfs. Useful with kexec.
1239
1240 endmenu
1241
1242 menu "CPU Power Management"
1243
1244 if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
1245
1246 source "drivers/cpufreq/Kconfig"
1247
1248 config CPU_FREQ_SA1100
1249         bool
1250         depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
1251         default y
1252
1253 config CPU_FREQ_SA1110
1254         bool
1255         depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
1256         default y
1257
1258 config CPU_FREQ_INTEGRATOR
1259         tristate "CPUfreq driver for ARM Integrator CPUs"
1260         depends on ARCH_INTEGRATOR && CPU_FREQ
1261         default y
1262         help
1263           This enables the CPUfreq driver for ARM Integrator CPUs.
1264
1265           For details, take a look at <file:Documentation/cpu-freq>.
1266
1267           If in doubt, say Y.
1268
1269 config CPU_FREQ_PXA
1270         bool
1271         depends on CPU_FREQ && ARCH_PXA && PXA25x
1272         default y
1273         select CPU_FREQ_DEFAULT_GOV_USERSPACE
1274
1275 config CPU_FREQ_S3C64XX
1276         bool "CPUfreq support for Samsung S3C64XX CPUs"
1277         depends on CPU_FREQ && CPU_S3C6410
1278
1279 endif
1280
1281 source "drivers/cpuidle/Kconfig"
1282
1283 endmenu
1284
1285 menu "Floating point emulation"
1286
1287 comment "At least one emulation must be selected"
1288
1289 config FPE_NWFPE
1290         bool "NWFPE math emulation"
1291         depends on !AEABI || OABI_COMPAT
1292         ---help---
1293           Say Y to include the NWFPE floating point emulator in the kernel.
1294           This is necessary to run most binaries. Linux does not currently
1295           support floating point hardware so you need to say Y here even if
1296           your machine has an FPA or floating point co-processor podule.
1297
1298           You may say N here if you are going to load the Acorn FPEmulator
1299           early in the bootup.
1300
1301 config FPE_NWFPE_XP
1302         bool "Support extended precision"
1303         depends on FPE_NWFPE
1304         help
1305           Say Y to include 80-bit support in the kernel floating-point
1306           emulator.  Otherwise, only 32 and 64-bit support is compiled in.
1307           Note that gcc does not generate 80-bit operations by default,
1308           so in most cases this option only enlarges the size of the
1309           floating point emulator without any good reason.
1310
1311           You almost surely want to say N here.
1312
1313 config FPE_FASTFPE
1314         bool "FastFPE math emulation (EXPERIMENTAL)"
1315         depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL
1316         ---help---
1317           Say Y here to include the FAST floating point emulator in the kernel.
1318           This is an experimental much faster emulator which now also has full
1319           precision for the mantissa.  It does not support any exceptions.
1320           It is very simple, and approximately 3-6 times faster than NWFPE.
1321
1322           It should be sufficient for most programs.  It may be not suitable
1323           for scientific calculations, but you have to check this for yourself.
1324           If you do not feel you need a faster FP emulation you should better
1325           choose NWFPE.
1326
1327 config VFP
1328         bool "VFP-format floating point maths"
1329         depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
1330         help
1331           Say Y to include VFP support code in the kernel. This is needed
1332           if your hardware includes a VFP unit.
1333
1334           Please see <file:Documentation/arm/VFP/release-notes.txt> for
1335           release notes and additional status information.
1336
1337           Say N if your target does not have VFP hardware.
1338
1339 config VFPv3
1340         bool
1341         depends on VFP
1342         default y if CPU_V7
1343
1344 config NEON
1345         bool "Advanced SIMD (NEON) Extension support"
1346         depends on VFPv3 && CPU_V7
1347         help
1348           Say Y to include support code for NEON, the ARMv7 Advanced SIMD
1349           Extension.
1350
1351 endmenu
1352
1353 menu "Userspace binary formats"
1354
1355 source "fs/Kconfig.binfmt"
1356
1357 config ARTHUR
1358         tristate "RISC OS personality"
1359         depends on !AEABI
1360         help
1361           Say Y here to include the kernel code necessary if you want to run
1362           Acorn RISC OS/Arthur binaries under Linux. This code is still very
1363           experimental; if this sounds frightening, say N and sleep in peace.
1364           You can also say M here to compile this support as a module (which
1365           will be called arthur).
1366
1367 endmenu
1368
1369 menu "Power management options"
1370
1371 source "kernel/power/Kconfig"
1372
1373 config ARCH_SUSPEND_POSSIBLE
1374         def_bool y
1375
1376 endmenu
1377
1378 source "net/Kconfig"
1379
1380 menu "Device Drivers"
1381
1382 source "drivers/base/Kconfig"
1383
1384 source "drivers/connector/Kconfig"
1385
1386 if ALIGNMENT_TRAP || !CPU_CP15_MMU
1387 source "drivers/mtd/Kconfig"
1388 endif
1389
1390 source "drivers/parport/Kconfig"
1391
1392 source "drivers/pnp/Kconfig"
1393
1394 source "drivers/block/Kconfig"
1395
1396 # misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
1397
1398 source "drivers/misc/Kconfig"
1399
1400 source "drivers/ide/Kconfig"
1401
1402 source "drivers/scsi/Kconfig"
1403
1404 source "drivers/ata/Kconfig"
1405
1406 source "drivers/md/Kconfig"
1407
1408 source "drivers/message/fusion/Kconfig"
1409
1410 source "drivers/ieee1394/Kconfig"
1411
1412 source "drivers/message/i2o/Kconfig"
1413
1414 source "drivers/net/Kconfig"
1415
1416 source "drivers/isdn/Kconfig"
1417
1418 # input before char - char/joystick depends on it. As does USB.
1419
1420 source "drivers/input/Kconfig"
1421
1422 source "drivers/char/Kconfig"
1423
1424 source "drivers/i2c/Kconfig"
1425
1426 source "drivers/spi/Kconfig"
1427
1428 source "drivers/gpio/Kconfig"
1429
1430 source "drivers/w1/Kconfig"
1431
1432 source "drivers/power/Kconfig"
1433
1434 source "drivers/hwmon/Kconfig"
1435
1436 source "drivers/thermal/Kconfig"
1437
1438 source "drivers/watchdog/Kconfig"
1439
1440 source "drivers/ssb/Kconfig"
1441
1442 #source "drivers/l3/Kconfig"
1443
1444 source "drivers/mfd/Kconfig"
1445
1446 source "drivers/media/Kconfig"
1447
1448 source "drivers/video/Kconfig"
1449
1450 source "sound/Kconfig"
1451
1452 source "drivers/hid/Kconfig"
1453
1454 source "drivers/usb/Kconfig"
1455
1456 source "drivers/uwb/Kconfig"
1457
1458 source "drivers/mmc/Kconfig"
1459
1460 source "drivers/memstick/Kconfig"
1461
1462 source "drivers/accessibility/Kconfig"
1463
1464 source "drivers/leds/Kconfig"
1465
1466 source "drivers/rtc/Kconfig"
1467
1468 source "drivers/dma/Kconfig"
1469
1470 source "drivers/dca/Kconfig"
1471
1472 source "drivers/auxdisplay/Kconfig"
1473
1474 source "drivers/regulator/Kconfig"
1475
1476 source "drivers/uio/Kconfig"
1477
1478 source "drivers/staging/Kconfig"
1479
1480 endmenu
1481
1482 source "fs/Kconfig"
1483
1484 source "arch/arm/Kconfig.debug"
1485
1486 source "security/Kconfig"
1487
1488 source "crypto/Kconfig"
1489
1490 source "lib/Kconfig"