3 source "lib/Kconfig.debug"
6 bool "Filter access to /dev/mem"
9 If this option is disabled, you allow userspace (root) access to all
10 of memory, including kernel and userspace memory. Accidental
11 access to this is obviously disastrous, but specific access can
12 be used by people debugging the kernel.
14 If this option is switched on, the /dev/mem file only allows
15 userspace access to memory mapped peripherals.
19 # RMK wants arm kernels compiled with frame pointers or stack unwinding.
20 # If you know what you are doing and are willing to live without stack
21 # traces, you can get a slightly smaller kernel by setting this option to
22 # n, but then RMK will have to kill you ;).
25 depends on !THUMB2_KERNEL
26 default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
28 If you say N here, the resulting kernel will be slightly smaller and
29 faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
30 when a problem occurs with the kernel, the information that is
31 reported is severely limited.
34 bool "Enable stack unwinding support (EXPERIMENTAL)"
38 This option enables stack unwinding support in the kernel
39 using the information automatically generated by the
40 compiler. The resulting kernel image is slightly bigger but
41 the performance is not affected. Currently, this feature
42 only works with EABI compilers. If unsure say Y.
46 depends on FUNCTION_TRACER && FRAME_POINTER
50 bool "Verbose user fault messages"
52 When a user program crashes due to an exception, the kernel can
53 print a brief message explaining what the problem was. This is
54 sometimes helpful for debugging but serves no purpose on a
55 production system. Most people should say N here.
57 In addition, you need to pass user_debug=N on the kernel command
58 line to enable this feature. N consists of the sum of:
60 1 - undefined instruction events
62 4 - invalid data aborts
66 # These options are only for real kernel hackers who want to get their hands dirty.
68 bool "Kernel low-level debugging functions (read help!)"
69 depends on DEBUG_KERNEL
71 Say Y here to include definitions of printascii, printch, printhex
72 in the kernel. This is helpful if you are debugging code that
73 executes before the console is initialized.
75 Note that selecting this option will limit the kernel to a single
76 UART definition, as specified below. Attempting to boot the kernel
77 image on a different platform *will not work*, so this option should
78 not be enabled for kernels that are intended to be portable.
81 prompt "Kernel low-level debugging port"
84 config AT91_DEBUG_LL_DBGU0
85 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
86 depends on HAVE_AT91_DBGU0
88 config AT91_DEBUG_LL_DBGU1
89 bool "Kernel low-level debugging on 9263 and 9g45"
90 depends on HAVE_AT91_DBGU1
93 bool "Kernel low-level debugging on BCM2835 PL011 UART"
94 depends on ARCH_BCM2835
95 select DEBUG_UART_PL01X
97 config DEBUG_CLPS711X_UART1
98 bool "Kernel low-level debugging messages via UART1"
99 depends on ARCH_CLPS711X
101 Say Y here if you want the debug print routines to direct
102 their output to the first serial port on these devices.
104 config DEBUG_CLPS711X_UART2
105 bool "Kernel low-level debugging messages via UART2"
106 depends on ARCH_CLPS711X
108 Say Y here if you want the debug print routines to direct
109 their output to the second serial port on these devices.
112 bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
113 depends on ARCH_CNS3XXX
114 select DEBUG_UART_PL01X
116 Say Y here if you want the debug print routines to direct
117 their output to the CNS3xxx UART0.
119 config DEBUG_DAVINCI_DA8XX_UART1
120 bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
121 depends on ARCH_DAVINCI_DA8XX
123 Say Y here if you want the debug print routines to direct
124 their output to UART1 serial port on DaVinci DA8XX devices.
126 config DEBUG_DAVINCI_DA8XX_UART2
127 bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
128 depends on ARCH_DAVINCI_DA8XX
130 Say Y here if you want the debug print routines to direct
131 their output to UART2 serial port on DaVinci DA8XX devices.
133 config DEBUG_DAVINCI_DMx_UART0
134 bool "Kernel low-level debugging on DaVinci DMx using UART0"
135 depends on ARCH_DAVINCI_DMx
137 Say Y here if you want the debug print routines to direct
138 their output to UART0 serial port on DaVinci DMx devices.
140 config DEBUG_DAVINCI_TNETV107X_UART1
141 bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
142 depends on ARCH_DAVINCI_TNETV107X
144 Say Y here if you want the debug print routines to direct
145 their output to UART1 serial port on DaVinci TNETV107X
148 config DEBUG_ZYNQ_UART0
149 bool "Kernel low-level debugging on Xilinx Zynq using UART0"
152 Say Y here if you want the debug print routines to direct
153 their output to UART0 on the Zynq platform.
155 config DEBUG_ZYNQ_UART1
156 bool "Kernel low-level debugging on Xilinx Zynq using UART1"
159 Say Y here if you want the debug print routines to direct
160 their output to UART1 on the Zynq platform.
162 If you have a ZC702 board and want early boot messages to
163 appear on the USB serial adaptor, select this option.
165 config DEBUG_DC21285_PORT
166 bool "Kernel low-level debugging messages via footbridge serial port"
167 depends on FOOTBRIDGE
169 Say Y here if you want the debug print routines to direct
170 their output to the serial port in the DC21285 (Footbridge).
172 config DEBUG_FOOTBRIDGE_COM1
173 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
174 depends on FOOTBRIDGE
176 Say Y here if you want the debug print routines to direct
177 their output to the 8250 at PCI COM1.
179 config DEBUG_HIGHBANK_UART
180 bool "Kernel low-level debugging messages via Highbank UART"
181 depends on ARCH_HIGHBANK
182 select DEBUG_UART_PL01X
184 Say Y here if you want the debug print routines to direct
185 their output to the UART on Highbank based devices.
187 config DEBUG_IMX1_UART
188 bool "i.MX1 Debug UART"
191 Say Y here if you want kernel low-level debugging support
194 config DEBUG_IMX23_UART
195 bool "i.MX23 Debug UART"
197 select DEBUG_UART_PL01X
199 Say Y here if you want kernel low-level debugging support
202 config DEBUG_IMX25_UART
203 bool "i.MX25 Debug UART"
206 Say Y here if you want kernel low-level debugging support
209 config DEBUG_IMX21_IMX27_UART
210 bool "i.MX21 and i.MX27 Debug UART"
211 depends on SOC_IMX21 || SOC_IMX27
213 Say Y here if you want kernel low-level debugging support
216 config DEBUG_IMX28_UART
217 bool "i.MX28 Debug UART"
219 select DEBUG_UART_PL01X
221 Say Y here if you want kernel low-level debugging support
224 config DEBUG_IMX31_UART
225 bool "i.MX31 Debug UART"
228 Say Y here if you want kernel low-level debugging support
231 config DEBUG_IMX35_UART
232 bool "i.MX35 Debug UART"
235 Say Y here if you want kernel low-level debugging support
238 config DEBUG_IMX51_UART
239 bool "i.MX51 Debug UART"
242 Say Y here if you want kernel low-level debugging support
245 config DEBUG_IMX53_UART
246 bool "i.MX53 Debug UART"
249 Say Y here if you want kernel low-level debugging support
252 config DEBUG_IMX6Q_UART
253 bool "i.MX6Q/DL Debug UART"
256 Say Y here if you want kernel low-level debugging support
259 config DEBUG_IMX6SL_UART
260 bool "i.MX6SL Debug UART"
261 depends on SOC_IMX6SL
263 Say Y here if you want kernel low-level debugging support
266 config DEBUG_KEYSTONE_UART0
267 bool "Kernel low-level debugging on KEYSTONE2 using UART0"
268 depends on ARCH_KEYSTONE
270 Say Y here if you want the debug print routines to direct
271 their output to UART0 serial port on KEYSTONE2 devices.
273 config DEBUG_KEYSTONE_UART1
274 bool "Kernel low-level debugging on KEYSTONE2 using UART1"
275 depends on ARCH_KEYSTONE
277 Say Y here if you want the debug print routines to direct
278 their output to UART1 serial port on KEYSTONE2 devices.
280 config DEBUG_MMP_UART2
281 bool "Kernel low-level debugging message via MMP UART2"
283 select DEBUG_UART_8250
285 Say Y here if you want kernel low-level debugging support
288 config DEBUG_MMP_UART3
289 bool "Kernel low-level debugging message via MMP UART3"
291 select DEBUG_UART_8250
293 Say Y here if you want kernel low-level debugging support
296 config DEBUG_MSM_UART1
297 bool "Kernel low-level debugging messages via MSM UART1"
298 depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
300 Say Y here if you want the debug print routines to direct
301 their output to the first serial port on MSM devices.
303 config DEBUG_MSM_UART2
304 bool "Kernel low-level debugging messages via MSM UART2"
305 depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
307 Say Y here if you want the debug print routines to direct
308 their output to the second serial port on MSM devices.
310 config DEBUG_MSM_UART3
311 bool "Kernel low-level debugging messages via MSM UART3"
312 depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
314 Say Y here if you want the debug print routines to direct
315 their output to the third serial port on MSM devices.
317 config DEBUG_MSM8660_UART
318 bool "Kernel low-level debugging messages via MSM 8660 UART"
319 depends on ARCH_MSM8X60
320 select MSM_HAS_DEBUG_UART_HS
322 Say Y here if you want the debug print routines to direct
323 their output to the serial port on MSM 8660 devices.
325 config DEBUG_MSM8960_UART
326 bool "Kernel low-level debugging messages via MSM 8960 UART"
327 depends on ARCH_MSM8960
328 select MSM_HAS_DEBUG_UART_HS
330 Say Y here if you want the debug print routines to direct
331 their output to the serial port on MSM 8960 devices.
333 config DEBUG_MVEBU_UART
334 bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
335 depends on ARCH_MVEBU
336 select DEBUG_UART_8250
338 Say Y here if you want kernel low-level debugging support
339 on MVEBU based platforms.
341 This option should be used with the old bootloaders
342 that left the internal registers mapped at
343 0xd0000000. As of today, this is the case on
344 platforms such as the Globalscale Mirabox or the
345 Plathome OpenBlocks AX3, when using the original
348 If the wrong DEBUG_MVEBU_UART* option is selected,
349 when u-boot hands over to the kernel, the system
350 silently crashes, with no serial output at all.
352 config DEBUG_MVEBU_UART_ALTERNATE
353 bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)"
354 depends on ARCH_MVEBU
355 select DEBUG_UART_8250
357 Say Y here if you want kernel low-level debugging support
358 on MVEBU based platforms.
360 This option should be used with the new bootloaders
361 that remap the internal registers at 0xf1000000.
363 If the wrong DEBUG_MVEBU_UART* option is selected,
364 when u-boot hands over to the kernel, the system
365 silently crashes, with no serial output at all.
367 config DEBUG_NOMADIK_UART
368 bool "Kernel low-level debugging messages via NOMADIK UART"
369 depends on ARCH_NOMADIK
370 select DEBUG_UART_PL01X
372 Say Y here if you want kernel low-level debugging support
373 on NOMADIK based platforms.
375 config DEBUG_NSPIRE_CLASSIC_UART
376 bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
377 depends on ARCH_NSPIRE
378 select DEBUG_UART_8250
380 Say Y here if you want kernel low-level debugging support
381 on TI-NSPIRE classic models.
383 config DEBUG_NSPIRE_CX_UART
384 bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
385 depends on ARCH_NSPIRE
386 select DEBUG_UART_PL01X
388 Say Y here if you want kernel low-level debugging support
389 on TI-NSPIRE CX models.
391 config DEBUG_OMAP2UART1
392 bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
393 depends on ARCH_OMAP2PLUS
394 select DEBUG_OMAP2PLUS_UART
396 This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
397 omap3 torpedo and 3530 lv som.
399 config DEBUG_OMAP2UART2
400 bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
401 depends on ARCH_OMAP2PLUS
402 select DEBUG_OMAP2PLUS_UART
404 config DEBUG_OMAP2UART3
405 bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
406 depends on ARCH_OMAP2PLUS
407 select DEBUG_OMAP2PLUS_UART
409 config DEBUG_OMAP3UART3
410 bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
411 depends on ARCH_OMAP2PLUS
412 select DEBUG_OMAP2PLUS_UART
414 This covers at least cm_t3x, beagle, crane, devkit8000,
415 igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
418 config DEBUG_OMAP4UART3
419 bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
420 depends on ARCH_OMAP2PLUS
421 select DEBUG_OMAP2PLUS_UART
423 config DEBUG_OMAP3UART4
424 bool "Kernel low-level debugging messages via OMAP36XX UART4"
425 depends on ARCH_OMAP2PLUS
426 select DEBUG_OMAP2PLUS_UART
428 config DEBUG_OMAP4UART4
429 bool "Kernel low-level debugging messages via OMAP4/5 UART4"
430 depends on ARCH_OMAP2PLUS
431 select DEBUG_OMAP2PLUS_UART
433 config DEBUG_TI81XXUART1
434 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
435 depends on ARCH_OMAP2PLUS
436 select DEBUG_OMAP2PLUS_UART
438 config DEBUG_TI81XXUART2
439 bool "Kernel low-level debugging messages via TI81XX UART2"
440 depends on ARCH_OMAP2PLUS
441 select DEBUG_OMAP2PLUS_UART
443 config DEBUG_TI81XXUART3
444 bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
445 depends on ARCH_OMAP2PLUS
446 select DEBUG_OMAP2PLUS_UART
448 config DEBUG_AM33XXUART1
449 bool "Kernel low-level debugging messages via AM33XX UART1"
450 depends on ARCH_OMAP2PLUS
451 select DEBUG_OMAP2PLUS_UART
453 config DEBUG_ZOOM_UART
454 bool "Kernel low-level debugging messages via Zoom2/3 UART"
455 depends on ARCH_OMAP2PLUS
456 select DEBUG_OMAP2PLUS_UART
458 config DEBUG_PICOXCELL_UART
459 depends on ARCH_PICOXCELL
460 bool "Use PicoXcell UART for low-level debug"
461 select DEBUG_UART_8250
463 Say Y here if you want kernel low-level debugging support
464 on PicoXcell based platforms.
466 config DEBUG_PXA_UART1
468 bool "Use PXA UART1 for low-level debug"
469 select DEBUG_UART_8250
471 Say Y here if you want kernel low-level debugging support
474 config DEBUG_REALVIEW_STD_PORT
475 bool "RealView Default UART"
476 depends on ARCH_REALVIEW
477 select DEBUG_UART_PL01X
479 Say Y here if you want the debug print routines to direct
480 their output to the serial port on RealView EB, PB11MP, PBA8
483 config DEBUG_REALVIEW_PB1176_PORT
484 bool "RealView PB1176 UART"
485 depends on MACH_REALVIEW_PB1176
486 select DEBUG_UART_PL01X
488 Say Y here if you want the debug print routines to direct
489 their output to the standard serial port on the RealView
492 config DEBUG_RK29_UART0
493 bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
494 depends on ARCH_ROCKCHIP
495 select DEBUG_ROCKCHIP_UART
496 select DEBUG_UART_8250
498 Say Y here if you want kernel low-level debugging support
499 on Rockchip based platforms.
501 config DEBUG_RK29_UART1
502 bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
503 depends on ARCH_ROCKCHIP
504 select DEBUG_ROCKCHIP_UART
505 select DEBUG_UART_8250
507 Say Y here if you want kernel low-level debugging support
508 on Rockchip based platforms.
510 config DEBUG_RK29_UART2
511 bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
512 depends on ARCH_ROCKCHIP
513 select DEBUG_ROCKCHIP_UART
514 select DEBUG_UART_8250
516 Say Y here if you want kernel low-level debugging support
517 on Rockchip based platforms.
519 config DEBUG_RK3X_UART0
520 bool "Kernel low-level debugging messages via Rockchip RK3X UART0"
521 depends on ARCH_ROCKCHIP
522 select DEBUG_ROCKCHIP_UART
523 select DEBUG_UART_8250
525 Say Y here if you want kernel low-level debugging support
526 on Rockchip based platforms.
528 config DEBUG_RK3X_UART1
529 bool "Kernel low-level debugging messages via Rockchip RK3X UART1"
530 depends on ARCH_ROCKCHIP
531 select DEBUG_ROCKCHIP_UART
532 select DEBUG_UART_8250
534 Say Y here if you want kernel low-level debugging support
535 on Rockchip based platforms.
537 config DEBUG_RK3X_UART2
538 bool "Kernel low-level debugging messages via Rockchip RK3X UART2"
539 depends on ARCH_ROCKCHIP
540 select DEBUG_ROCKCHIP_UART
541 select DEBUG_UART_8250
543 Say Y here if you want kernel low-level debugging support
544 on Rockchip based platforms.
546 config DEBUG_RK3X_UART3
547 bool "Kernel low-level debugging messages via Rockchip RK3X UART3"
548 depends on ARCH_ROCKCHIP
549 select DEBUG_ROCKCHIP_UART
550 select DEBUG_UART_8250
552 Say Y here if you want kernel low-level debugging support
553 on Rockchip based platforms.
555 config DEBUG_S3C_UART0
556 depends on PLAT_SAMSUNG
557 select DEBUG_EXYNOS_UART if ARCH_EXYNOS
558 bool "Use S3C UART 0 for low-level debug"
560 Say Y here if you want the debug print routines to direct
561 their output to UART 0. The port must have been initialised
562 by the boot-loader before use.
564 The uncompressor code port configuration is now handled
565 by CONFIG_S3C_LOWLEVEL_UART_PORT.
567 config DEBUG_S3C_UART1
568 depends on PLAT_SAMSUNG
569 select DEBUG_EXYNOS_UART if ARCH_EXYNOS
570 bool "Use S3C UART 1 for low-level debug"
572 Say Y here if you want the debug print routines to direct
573 their output to UART 1. The port must have been initialised
574 by the boot-loader before use.
576 The uncompressor code port configuration is now handled
577 by CONFIG_S3C_LOWLEVEL_UART_PORT.
579 config DEBUG_S3C_UART2
580 depends on PLAT_SAMSUNG
581 select DEBUG_EXYNOS_UART if ARCH_EXYNOS
582 bool "Use S3C UART 2 for low-level debug"
584 Say Y here if you want the debug print routines to direct
585 their output to UART 2. The port must have been initialised
586 by the boot-loader before use.
588 The uncompressor code port configuration is now handled
589 by CONFIG_S3C_LOWLEVEL_UART_PORT.
591 config DEBUG_S3C_UART3
592 depends on PLAT_SAMSUNG && ARCH_EXYNOS
593 select DEBUG_EXYNOS_UART
594 bool "Use S3C UART 3 for low-level debug"
596 Say Y here if you want the debug print routines to direct
597 their output to UART 3. The port must have been initialised
598 by the boot-loader before use.
600 The uncompressor code port configuration is now handled
601 by CONFIG_S3C_LOWLEVEL_UART_PORT.
603 config DEBUG_SOCFPGA_UART
604 depends on ARCH_SOCFPGA
605 bool "Use SOCFPGA UART for low-level debug"
606 select DEBUG_UART_8250
608 Say Y here if you want kernel low-level debugging support
609 on SOCFPGA based platforms.
611 config DEBUG_SUNXI_UART0
612 bool "Kernel low-level debugging messages via sunXi UART0"
613 depends on ARCH_SUNXI
614 select DEBUG_UART_8250
616 Say Y here if you want kernel low-level debugging support
617 on Allwinner A1X based platforms on the UART0.
619 config DEBUG_SUNXI_UART1
620 bool "Kernel low-level debugging messages via sunXi UART1"
621 depends on ARCH_SUNXI
622 select DEBUG_UART_8250
624 Say Y here if you want kernel low-level debugging support
625 on Allwinner A1X based platforms on the UART1.
627 config TEGRA_DEBUG_UART_AUTO_ODMDATA
628 bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
629 depends on ARCH_TEGRA
630 select DEBUG_TEGRA_UART
632 Automatically determines which UART to use for low-level
633 debug based on the ODMDATA value. This value is part of
634 the BCT, and is written to the boot memory device using
635 nvflash, or other flashing tool. When bits 19:18 are 3,
636 then bits 17:15 indicate which UART to use; 0/1/2/3/4
639 config TEGRA_DEBUG_UARTA
640 bool "Kernel low-level debugging messages via Tegra UART A"
641 depends on ARCH_TEGRA
642 select DEBUG_TEGRA_UART
644 Say Y here if you want kernel low-level debugging support
645 on Tegra based platforms.
647 config TEGRA_DEBUG_UARTB
648 bool "Kernel low-level debugging messages via Tegra UART B"
649 depends on ARCH_TEGRA
650 select DEBUG_TEGRA_UART
652 Say Y here if you want kernel low-level debugging support
653 on Tegra based platforms.
655 config TEGRA_DEBUG_UARTC
656 bool "Kernel low-level debugging messages via Tegra UART C"
657 depends on ARCH_TEGRA
658 select DEBUG_TEGRA_UART
660 Say Y here if you want kernel low-level debugging support
661 on Tegra based platforms.
663 config TEGRA_DEBUG_UARTD
664 bool "Kernel low-level debugging messages via Tegra UART D"
665 depends on ARCH_TEGRA
666 select DEBUG_TEGRA_UART
668 Say Y here if you want kernel low-level debugging support
669 on Tegra based platforms.
671 config TEGRA_DEBUG_UARTE
672 bool "Kernel low-level debugging messages via Tegra UART E"
673 depends on ARCH_TEGRA
674 select DEBUG_TEGRA_UART
676 Say Y here if you want kernel low-level debugging support
677 on Tegra based platforms.
679 config DEBUG_SIRFPRIMA2_UART1
680 bool "Kernel low-level debugging messages via SiRFprimaII UART1"
681 depends on ARCH_PRIMA2
683 Say Y here if you want the debug print routines to direct
684 their output to the uart1 port on SiRFprimaII devices.
686 config DEBUG_SIRFMARCO_UART1
687 bool "Kernel low-level debugging messages via SiRFmarco UART1"
688 depends on ARCH_MARCO
690 Say Y here if you want the debug print routines to direct
691 their output to the uart1 port on SiRFmarco devices.
693 config STIH41X_DEBUG_ASC2
694 bool "Use StiH415/416 ASC2 UART for low-level debug"
696 select DEBUG_STI_UART
698 Say Y here if you want kernel low-level debugging support
699 on STiH415/416 based platforms like b2000, which has
700 default UART wired up to ASC2.
704 config STIH41X_DEBUG_SBC_ASC1
705 bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
707 select DEBUG_STI_UART
709 Say Y here if you want kernel low-level debugging support
710 on STiH415/416 based platforms like b2020. which has
711 default UART wired up to SBC ASC1.
715 config DEBUG_U300_UART
716 bool "Kernel low-level debugging messages via U300 UART0"
718 select DEBUG_UART_PL01X
720 Say Y here if you want the debug print routines to direct
721 their output to the uart port on U300 devices.
723 config DEBUG_UX500_UART
724 depends on ARCH_U8500
725 bool "Use Ux500 UART for low-level debug"
727 Say Y here if you want kernel low-level debugging support
728 on Ux500 based platforms.
730 config DEBUG_VEXPRESS_UART0_DETECT
731 bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
732 depends on ARCH_VEXPRESS && CPU_CP15_MMU
734 This option enables a simple heuristic which tries to determine
735 the motherboard's memory map variant (original or RS1) and then
736 choose the relevant UART0 base address.
738 Note that this will only work with standard A-class core tiles,
739 and may fail with non-standard SMM or custom software models.
741 config DEBUG_VEXPRESS_UART0_CA9
742 bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
743 depends on ARCH_VEXPRESS
744 select DEBUG_UART_PL01X
746 This option selects UART0 at 0x10009000. Except for custom models,
747 this applies only to the V2P-CA9 tile.
749 config DEBUG_VEXPRESS_UART0_RS1
750 bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
751 depends on ARCH_VEXPRESS
752 select DEBUG_UART_PL01X
754 This option selects UART0 at 0x1c090000. This applies to most
755 of the tiles using the RS1 memory map, including all new A-class
756 core tiles, FPGA-based SMMs and software models.
758 config DEBUG_VEXPRESS_UART0_CRX
759 bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)"
760 depends on ARCH_VEXPRESS && !MMU
761 select DEBUG_UART_PL01X
763 This option selects UART0 at 0xb0090000. This is appropriate for
764 Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
766 config DEBUG_VT8500_UART0
767 bool "Use UART0 on VIA/Wondermedia SoCs"
768 depends on ARCH_VT8500
770 This option selects UART0 on VIA/Wondermedia System-on-a-chip
771 devices, including VT8500, WM8505, WM8650 and WM8850.
773 config DEBUG_LL_UART_NONE
774 bool "No low-level debugging UART"
775 depends on !ARCH_MULTIPLATFORM
777 Say Y here if your platform doesn't provide a UART option
778 above. This relies on your platform choosing the right UART
779 definition internally in order for low-level debugging to
783 bool "Kernel low-level debugging via EmbeddedICE DCC channel"
785 Say Y here if you want the debug print routines to direct
786 their output to the EmbeddedICE macrocell's DCC channel using
787 co-processor 14. This is known to work on the ARM9 style ICE
788 channel and on the XScale with the PEEDI.
790 Note that the system will appear to hang during boot if there
791 is nothing connected to read from the DCC.
793 config DEBUG_SEMIHOSTING
794 bool "Kernel low-level debug output via semihosting I/O"
796 Semihosting enables code running on an ARM target to use
797 the I/O facilities on a host debugger/emulator through a
798 simple SVC call. The host debugger or emulator must have
799 semihosting enabled for the special svc call to be trapped
800 otherwise the kernel will crash.
802 This is known to work with OpenOCD, as well as
803 ARM's Fast Models, or any other controlling environment
804 that implements semihosting.
806 For more details about semihosting, please see
807 chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
809 config DEBUG_LL_UART_8250
810 bool "Kernel low-level debugging via 8250 UART"
812 Say Y here if you wish the debug print routes to direct
813 their output to an 8250 UART. You can use this option
814 to provide the parameters for the 8250 UART rather than
815 selecting one of the platform specific options above if
816 you know the parameters for the port.
818 This option is preferred over the platform specific
819 options; the platform specific options are deprecated
820 and will be soon removed.
822 config DEBUG_LL_UART_PL01X
823 bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
825 Say Y here if you wish the debug print routes to direct
826 their output to a PL01x Primecell UART. You can use
827 this option to provide the parameters for the UART
828 rather than selecting one of the platform specific
829 options above if you know the parameters for the port.
831 This option is preferred over the platform specific
832 options; the platform specific options are deprecated
833 and will be soon removed.
837 config DEBUG_EXYNOS_UART
840 config DEBUG_OMAP2PLUS_UART
842 depends on ARCH_OMAP2PLUS
844 config DEBUG_IMX_UART_PORT
845 int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
846 DEBUG_IMX25_UART || \
847 DEBUG_IMX21_IMX27_UART || \
848 DEBUG_IMX31_UART || \
849 DEBUG_IMX35_UART || \
850 DEBUG_IMX51_UART || \
851 DEBUG_IMX53_UART || \
852 DEBUG_IMX6Q_UART || \
857 Choose UART port on which kernel low-level debug messages
860 config DEBUG_ROCKCHIP_UART
862 depends on ARCH_ROCKCHIP
864 config DEBUG_TEGRA_UART
866 depends on ARCH_TEGRA
868 config DEBUG_STI_UART
872 config DEBUG_LL_INCLUDE
874 default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
875 default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
876 default "debug/exynos.S" if DEBUG_EXYNOS_UART
877 default "debug/icedcc.S" if DEBUG_ICEDCC
878 default "debug/imx.S" if DEBUG_IMX1_UART || \
879 DEBUG_IMX25_UART || \
880 DEBUG_IMX21_IMX27_UART || \
881 DEBUG_IMX31_UART || \
882 DEBUG_IMX35_UART || \
883 DEBUG_IMX51_UART || \
885 DEBUG_IMX6Q_UART || \
887 default "debug/keystone.S" if DEBUG_KEYSTONE_UART0 || \
889 default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
890 default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
891 default "debug/sti.S" if DEBUG_STI_UART
892 default "debug/tegra.S" if DEBUG_TEGRA_UART
893 default "debug/ux500.S" if DEBUG_UX500_UART
894 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
895 default "debug/vt8500.S" if DEBUG_VT8500_UART0
896 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
897 default "mach/debug-macro.S"
899 # Compatibility options for PL01x
900 config DEBUG_UART_PL01X
901 def_bool ARCH_EP93XX || \
905 # Compatibility options for 8250
906 config DEBUG_UART_8250
907 def_bool ARCH_DOVE || ARCH_EBSA110 || \
908 (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
909 ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
910 ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \
911 ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
913 config DEBUG_UART_PHYS
914 hex "Physical base address of debug UART"
915 default 0x01c28000 if DEBUG_SUNXI_UART0
916 default 0x01c28400 if DEBUG_SUNXI_UART1
917 default 0x03010fe0 if ARCH_RPC
918 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \
919 DEBUG_VEXPRESS_UART0_CA9
920 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
921 default 0x10124000 if DEBUG_RK3X_UART0
922 default 0x10126000 if DEBUG_RK3X_UART1
923 default 0x101f1000 if ARCH_VERSATILE
924 default 0x101fb000 if DEBUG_NOMADIK_UART
925 default 0x16000000 if ARCH_INTEGRATOR
926 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
927 default 0x20060000 if DEBUG_RK29_UART0
928 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
929 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
930 default 0x20201000 if DEBUG_BCM2835
931 default 0x40090000 if ARCH_LPC32XX
932 default 0x40100000 if DEBUG_PXA_UART1
933 default 0x42000000 if ARCH_GEMINI
934 default 0x7c0003f8 if FOOTBRIDGE
935 default 0x80230000 if DEBUG_PICOXCELL_UART
936 default 0x80070000 if DEBUG_IMX23_UART
937 default 0x80074000 if DEBUG_IMX28_UART
938 default 0x808c0000 if ARCH_EP93XX
939 default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
940 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
941 default 0xc0013000 if DEBUG_U300_UART
942 default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
943 default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
944 default 0xd0012000 if DEBUG_MVEBU_UART
945 default 0xd4017000 if DEBUG_MMP_UART2
946 default 0xd4018000 if DEBUG_MMP_UART3
947 default 0xf0000be0 if ARCH_EBSA110
948 default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
949 default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
951 default 0xfe800000 if ARCH_IOP32X
952 default 0xffc02000 if DEBUG_SOCFPGA_UART
953 default 0xffd82340 if ARCH_IOP13XX
954 default 0xfff36000 if DEBUG_HIGHBANK_UART
955 default 0xfffff700 if ARCH_IOP33X
956 depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
957 DEBUG_UART_8250 || DEBUG_UART_PL01X
959 config DEBUG_UART_VIRT
960 hex "Virtual base address of debug UART"
961 default 0xe0010fe0 if ARCH_RPC
962 default 0xf0000be0 if ARCH_EBSA110
963 default 0xf0009000 if DEBUG_CNS3XXX
964 default 0xf01fb000 if DEBUG_NOMADIK_UART
965 default 0xf0201000 if DEBUG_BCM2835
966 default 0xf11f1000 if ARCH_VERSATILE
967 default 0xf1600000 if ARCH_INTEGRATOR
968 default 0xf1c28000 if DEBUG_SUNXI_UART0
969 default 0xf1c28400 if DEBUG_SUNXI_UART1
970 default 0xf2100000 if DEBUG_PXA_UART1
971 default 0xf4090000 if ARCH_LPC32XX
972 default 0xf4200000 if ARCH_GEMINI
973 default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
974 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
975 default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
976 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
977 default 0xfd012000 if ARCH_MV78XX0
978 default 0xfde12000 if ARCH_DOVE
979 default 0xfe012000 if ARCH_ORION5X
980 default 0xfe017000 if DEBUG_MMP_UART2
981 default 0xfe018000 if DEBUG_MMP_UART3
982 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
983 default 0xfe230000 if DEBUG_PICOXCELL_UART
984 default 0xfe800000 if ARCH_IOP32X
985 default 0xfeb24000 if DEBUG_RK3X_UART0
986 default 0xfeb26000 if DEBUG_RK3X_UART1
987 default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
988 default 0xfed60000 if DEBUG_RK29_UART0
989 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
990 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
991 default 0xfec02000 if DEBUG_SOCFPGA_UART
992 default 0xfed12000 if ARCH_KIRKWOOD
993 default 0xfedc0000 if ARCH_EP93XX
994 default 0xfee003f8 if FOOTBRIDGE
995 default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
996 default 0xfee36000 if DEBUG_HIGHBANK_UART
997 default 0xfee82340 if ARCH_IOP13XX
998 default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
999 default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
1000 default 0xfefff700 if ARCH_IOP33X
1001 default 0xff003000 if DEBUG_U300_UART
1002 default DEBUG_UART_PHYS if !MMU
1003 depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
1004 DEBUG_UART_8250 || DEBUG_UART_PL01X
1006 config DEBUG_UART_8250_SHIFT
1007 int "Register offset shift for the 8250 debug UART"
1008 depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
1009 default 0 if FOOTBRIDGE || ARCH_IOP32X
1012 config DEBUG_UART_8250_WORD
1013 bool "Use 32-bit accesses for 8250 UART"
1014 depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
1015 depends on DEBUG_UART_8250_SHIFT >= 2
1016 default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART
1018 config DEBUG_UART_8250_FLOW_CONTROL
1019 bool "Enable flow control for 8250 UART"
1020 depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
1021 default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
1023 config DEBUG_UNCOMPRESS
1025 depends on ARCH_MULTIPLATFORM
1026 default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
1029 This option influences the normal decompressor output for
1030 multiplatform kernels. Normally, multiplatform kernels disable
1031 decompressor output because it is not possible to know where to
1032 send the decompressor output.
1034 When this option is set, the selected DEBUG_LL output method
1035 will be re-used for normal decompressor output on multiplatform
1039 config UNCOMPRESS_INCLUDE
1041 default "debug/uncompress.h" if ARCH_MULTIPLATFORM
1042 default "mach/uncompress.h"
1048 Say Y here if you want to have an early console using the
1049 kernel low-level debugging functions. Add earlyprintk to your
1050 kernel parameters to enable this console.
1053 bool "On-chip ETM and ETB"
1056 Enables the on-chip embedded trace macrocell and embedded trace
1057 buffer driver that will allow you to collect traces of the
1060 config ARM_KPROBES_TEST
1061 tristate "Kprobes test module"
1062 depends on KPROBES && MODULES
1064 Perform tests of kprobes API and instruction set simulation.
1066 config PID_IN_CONTEXTIDR
1067 bool "Write the current PID to the CONTEXTIDR register"
1068 depends on CPU_COPY_V6
1070 Enabling this option causes the kernel to write the current PID to
1071 the PROCID field of the CONTEXTIDR register, at the expense of some
1072 additional instructions during context switch. Say Y here only if you
1073 are planning to use hardware trace tools with this kernel.