arch/arm/Kconfig.debug

   1 menu "Kernel hacking"
   2
   3 source "lib/Kconfig.debug"
   4
   5 config ARM_PTDUMP
   6         bool "Export kernel pagetable layout to userspace via debugfs"
   7         depends on DEBUG_KERNEL
   8         select DEBUG_FS
   9         ---help---
  10           Say Y here if you want to show the kernel pagetable layout in a
  11           debugfs file. This information is only useful for kernel developers
  12           who are working in architecture specific areas of the kernel.
  13           It is probably not a good idea to enable this feature in a production
  14           kernel.
  15           If in doubt, say "N"
  16
  17 config STRICT_DEVMEM
  18         bool "Filter access to /dev/mem"
  19         depends on MMU
  20         ---help---
  21           If this option is disabled, you allow userspace (root) access to all
  22           of memory, including kernel and userspace memory. Accidental
  23           access to this is obviously disastrous, but specific access can
  24           be used by people debugging the kernel.
  25
  26           If this option is switched on, the /dev/mem file only allows
  27           userspace access to memory mapped peripherals.
  28
  29           If in doubt, say Y.
  30
  31 # RMK wants arm kernels compiled with frame pointers or stack unwinding.
  32 # If you know what you are doing and are willing to live without stack
  33 # traces, you can get a slightly smaller kernel by setting this option to
  34 # n, but then RMK will have to kill you ;).
  35 config FRAME_POINTER
  36         bool
  37         depends on !THUMB2_KERNEL
  38         default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
  39         help
  40           If you say N here, the resulting kernel will be slightly smaller and
  41           faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
  42           when a problem occurs with the kernel, the information that is
  43           reported is severely limited.
  44
  45 config ARM_UNWIND
  46         bool "Enable stack unwinding support (EXPERIMENTAL)"
  47         depends on AEABI
  48         default y
  49         help
  50           This option enables stack unwinding support in the kernel
  51           using the information automatically generated by the
  52           compiler. The resulting kernel image is slightly bigger but
  53           the performance is not affected. Currently, this feature
  54           only works with EABI compilers. If unsure say Y.
  55
  56 config OLD_MCOUNT
  57         bool
  58         depends on FUNCTION_TRACER && FRAME_POINTER
  59         default y
  60
  61 config DEBUG_USER
  62         bool "Verbose user fault messages"
  63         help
  64           When a user program crashes due to an exception, the kernel can
  65           print a brief message explaining what the problem was. This is
  66           sometimes helpful for debugging but serves no purpose on a
  67           production system. Most people should say N here.
  68
  69           In addition, you need to pass user_debug=N on the kernel command
  70           line to enable this feature.  N consists of the sum of:
  71
  72               1 - undefined instruction events
  73               2 - system calls
  74               4 - invalid data aborts
  75               8 - SIGSEGV faults
  76              16 - SIGBUS faults
  77
  78 # These options are only for real kernel hackers who want to get their hands dirty.
  79 config DEBUG_LL
  80         bool "Kernel low-level debugging functions (read help!)"
  81         depends on DEBUG_KERNEL
  82         help
  83           Say Y here to include definitions of printascii, printch, printhex
  84           in the kernel.  This is helpful if you are debugging code that
  85           executes before the console is initialized.
  86
  87           Note that selecting this option will limit the kernel to a single
  88           UART definition, as specified below. Attempting to boot the kernel
  89           image on a different platform *will not work*, so this option should
  90           not be enabled for kernels that are intended to be portable.
  91
  92 choice
  93         prompt "Kernel low-level debugging port"
  94         depends on DEBUG_LL
  95
  96         config DEBUG_ASM9260_UART
  97                 bool "Kernel low-level debugging via asm9260 UART"
  98                 depends on MACH_ASM9260
  99                 help
 100                   Say Y here if you want the debug print routines to direct
 101                   their output to an UART or USART port on asm9260 based
 102                   machines.
 103
 104                     DEBUG_UART_PHYS | DEBUG_UART_VIRT
 105
 106                     0x80000000      | 0xf0000000     | UART0
 107                     0x80004000      | 0xf0004000     | UART1
 108                     0x80008000      | 0xf0008000     | UART2
 109                     0x8000c000      | 0xf000c000     | UART3
 110                     0x80010000      | 0xf0010000     | UART4
 111                     0x80014000      | 0xf0014000     | UART5
 112                     0x80018000      | 0xf0018000     | UART6
 113                     0x8001c000      | 0xf001c000     | UART7
 114                     0x80020000      | 0xf0020000     | UART8
 115                     0x80024000      | 0xf0024000     | UART9
 116
 117         config AT91_DEBUG_LL_DBGU0
 118                 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12"
 119                 select DEBUG_AT91_UART
 120                 depends on ARCH_AT91
 121                 depends on SOC_AT91RM9200 || SOC_AT91SAM9
 122
 123         config AT91_DEBUG_LL_DBGU1
 124                 bool "Kernel low-level debugging on 9263, 9g45 and sama5d3"
 125                 select DEBUG_AT91_UART
 126                 depends on ARCH_AT91
 127                 depends on SOC_AT91SAM9 || SOC_SAMA5
 128
 129         config AT91_DEBUG_LL_DBGU2
 130                 bool "Kernel low-level debugging on sama5d4"
 131                 select DEBUG_AT91_UART
 132                 depends on ARCH_AT91
 133                 depends on SOC_SAMA5
 134
 135         config DEBUG_BCM2835
 136                 bool "Kernel low-level debugging on BCM2835 PL011 UART"
 137                 depends on ARCH_BCM2835
 138                 select DEBUG_UART_PL01X
 139
 140         config DEBUG_BCM_5301X
 141                 bool "Kernel low-level debugging on BCM5301X UART1"
 142                 depends on ARCH_BCM_5301X
 143                 select DEBUG_UART_8250
 144
 145         config DEBUG_BCM_KONA_UART
 146                 bool "Kernel low-level debugging messages via BCM KONA UART"
 147                 depends on ARCH_BCM_MOBILE
 148                 select DEBUG_UART_8250
 149                 help
 150                   Say Y here if you want kernel low-level debugging support
 151                   on Broadcom SoC platforms.
 152                   This low level debug works for Broadcom
 153                   mobile SoCs in the Kona family of chips (e.g. bcm28155,
 154                   bcm11351, etc...)
 155
 156         config DEBUG_BCM63XX
 157                 bool "Kernel low-level debugging on BCM63XX UART"
 158                 depends on ARCH_BCM_63XX
 159                 select DEBUG_UART_BCM63XX
 160
 161         config DEBUG_BERLIN_UART
 162                 bool "Marvell Berlin SoC Debug UART"
 163                 depends on ARCH_BERLIN
 164                 select DEBUG_UART_8250
 165                 help
 166                   Say Y here if you want kernel low-level debugging support
 167                   on Marvell Berlin SoC based platforms.
 168
 169         config DEBUG_BRCMSTB_UART
 170                 bool "Use BRCMSTB UART for low-level debug"
 171                 depends on ARCH_BRCMSTB
 172                 select DEBUG_UART_8250
 173                 help
 174                   Say Y here if you want the debug print routines to direct
 175                   their output to the first serial port on these devices.
 176
 177                   If you have a Broadcom STB chip and would like early print
 178                   messages to appear over the UART, select this option.
 179
 180         config DEBUG_CLPS711X_UART1
 181                 bool "Kernel low-level debugging messages via UART1"
 182                 depends on ARCH_CLPS711X
 183                 help
 184                   Say Y here if you want the debug print routines to direct
 185                   their output to the first serial port on these devices.
 186
 187         config DEBUG_CLPS711X_UART2
 188                 bool "Kernel low-level debugging messages via UART2"
 189                 depends on ARCH_CLPS711X
 190                 help
 191                   Say Y here if you want the debug print routines to direct
 192                   their output to the second serial port on these devices.
 193
 194         config DEBUG_CNS3XXX
 195                 bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
 196                 depends on ARCH_CNS3XXX
 197                 select DEBUG_UART_8250
 198                 help
 199                   Say Y here if you want the debug print routines to direct
 200                   their output to the CNS3xxx UART0.
 201
 202         config DEBUG_DAVINCI_DA8XX_UART1
 203                 bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 204                 depends on ARCH_DAVINCI_DA8XX
 205                 select DEBUG_UART_8250
 206                 help
 207                   Say Y here if you want the debug print routines to direct
 208                   their output to UART1 serial port on DaVinci DA8XX devices.
 209
 210         config DEBUG_DAVINCI_DA8XX_UART2
 211                 bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
 212                 depends on ARCH_DAVINCI_DA8XX
 213                 select DEBUG_UART_8250
 214                 help
 215                   Say Y here if you want the debug print routines to direct
 216                   their output to UART2 serial port on DaVinci DA8XX devices.
 217
 218         config DEBUG_DAVINCI_DMx_UART0
 219                 bool "Kernel low-level debugging on DaVinci DMx using UART0"
 220                 depends on ARCH_DAVINCI_DMx
 221                 select DEBUG_UART_8250
 222                 help
 223                   Say Y here if you want the debug print routines to direct
 224                   their output to UART0 serial port on DaVinci DMx devices.
 225
 226         config DEBUG_ZYNQ_UART0
 227                 bool "Kernel low-level debugging on Xilinx Zynq using UART0"
 228                 depends on ARCH_ZYNQ
 229                 help
 230                   Say Y here if you want the debug print routines to direct
 231                   their output to UART0 on the Zynq platform.
 232
 233         config DEBUG_ZYNQ_UART1
 234                 bool "Kernel low-level debugging on Xilinx Zynq using UART1"
 235                 depends on ARCH_ZYNQ
 236                 help
 237                   Say Y here if you want the debug print routines to direct
 238                   their output to UART1 on the Zynq platform.
 239
 240                   If you have a ZC702 board and want early boot messages to
 241                   appear on the USB serial adaptor, select this option.
 242
 243         config DEBUG_DC21285_PORT
 244                 bool "Kernel low-level debugging messages via footbridge serial port"
 245                 depends on FOOTBRIDGE
 246                 help
 247                   Say Y here if you want the debug print routines to direct
 248                   their output to the serial port in the DC21285 (Footbridge).
 249
 250         config DEBUG_DIGICOLOR_UA0
 251                 bool "Kernel low-level debugging messages via Digicolor UA0"
 252                 depends on ARCH_DIGICOLOR
 253                 help
 254                   Say Y here if you want the debug print routines to direct
 255                   their output to the UA0 serial port in the CX92755.
 256
 257         config DEBUG_FOOTBRIDGE_COM1
 258                 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
 259                 depends on FOOTBRIDGE
 260                 help
 261                   Say Y here if you want the debug print routines to direct
 262                   their output to the 8250 at PCI COM1.
 263
 264         config DEBUG_HI3620_UART
 265                 bool "Hisilicon HI3620 Debug UART"
 266                 depends on ARCH_HI3xxx
 267                 select DEBUG_UART_PL01X
 268                 help
 269                   Say Y here if you want kernel low-level debugging support
 270                   on HI3620 UART.
 271
 272         config DEBUG_HI3716_UART
 273                 bool "Hisilicon Hi3716 Debug UART"
 274                 depends on ARCH_HI3xxx
 275                 select DEBUG_UART_PL01X
 276                 help
 277                   Say Y here if you want kernel low-level debugging support
 278                   on HI3716 UART.
 279
 280         config DEBUG_HIGHBANK_UART
 281                 bool "Kernel low-level debugging messages via Highbank UART"
 282                 depends on ARCH_HIGHBANK
 283                 select DEBUG_UART_PL01X
 284                 help
 285                   Say Y here if you want the debug print routines to direct
 286                   their output to the UART on Highbank based devices.
 287
 288         config DEBUG_HIP01_UART
 289                 bool "Hisilicon Hip01 Debug UART"
 290                 depends on ARCH_HIP01
 291                 select DEBUG_UART_8250
 292                 help
 293                   Say Y here if you want kernel low-level debugging support
 294                   on HIP01 UART.
 295
 296         config DEBUG_HIP04_UART
 297                 bool "Hisilicon HiP04 Debug UART"
 298                 depends on ARCH_HIP04
 299                 select DEBUG_UART_8250
 300                 help
 301                   Say Y here if you want kernel low-level debugging support
 302                   on HIP04 UART.
 303
 304         config DEBUG_HIX5HD2_UART
 305                 bool "Hisilicon Hix5hd2 Debug UART"
 306                 depends on ARCH_HIX5HD2
 307                 select DEBUG_UART_PL01X
 308                 help
 309                   Say Y here if you want kernel low-level debugging support
 310                   on Hix5hd2 UART.
 311
 312         config DEBUG_IMX1_UART
 313                 bool "i.MX1 Debug UART"
 314                 depends on SOC_IMX1
 315                 help
 316                   Say Y here if you want kernel low-level debugging support
 317                   on i.MX1.
 318
 319         config DEBUG_IMX23_UART
 320                 bool "i.MX23 Debug UART"
 321                 depends on SOC_IMX23
 322                 select DEBUG_UART_PL01X
 323                 help
 324                   Say Y here if you want kernel low-level debugging support
 325                   on i.MX23.
 326
 327         config DEBUG_IMX25_UART
 328                 bool "i.MX25 Debug UART"
 329                 depends on SOC_IMX25
 330                 help
 331                   Say Y here if you want kernel low-level debugging support
 332                   on i.MX25.
 333
 334         config DEBUG_IMX21_IMX27_UART
 335                 bool "i.MX21 and i.MX27 Debug UART"
 336                 depends on SOC_IMX21 || SOC_IMX27
 337                 help
 338                   Say Y here if you want kernel low-level debugging support
 339                   on i.MX21 or i.MX27.
 340
 341         config DEBUG_IMX28_UART
 342                 bool "i.MX28 Debug UART"
 343                 depends on SOC_IMX28
 344                 select DEBUG_UART_PL01X
 345                 help
 346                   Say Y here if you want kernel low-level debugging support
 347                   on i.MX28.
 348
 349         config DEBUG_IMX31_UART
 350                 bool "i.MX31 Debug UART"
 351                 depends on SOC_IMX31
 352                 help
 353                   Say Y here if you want kernel low-level debugging support
 354                   on i.MX31.
 355
 356         config DEBUG_IMX35_UART
 357                 bool "i.MX35 Debug UART"
 358                 depends on SOC_IMX35
 359                 help
 360                   Say Y here if you want kernel low-level debugging support
 361                   on i.MX35.
 362
 363         config DEBUG_IMX50_UART
 364                 bool "i.MX50 Debug UART"
 365                 depends on SOC_IMX50
 366                 help
 367                   Say Y here if you want kernel low-level debugging support
 368                   on i.MX50.
 369
 370         config DEBUG_IMX51_UART
 371                 bool "i.MX51 Debug UART"
 372                 depends on SOC_IMX51
 373                 help
 374                   Say Y here if you want kernel low-level debugging support
 375                   on i.MX51.
 376
 377         config DEBUG_IMX53_UART
 378                 bool "i.MX53 Debug UART"
 379                 depends on SOC_IMX53
 380                 help
 381                   Say Y here if you want kernel low-level debugging support
 382                   on i.MX53.
 383
 384         config DEBUG_IMX6Q_UART
 385                 bool "i.MX6Q/DL Debug UART"
 386                 depends on SOC_IMX6Q
 387                 help
 388                   Say Y here if you want kernel low-level debugging support
 389                   on i.MX6Q/DL.
 390
 391         config DEBUG_IMX6SL_UART
 392                 bool "i.MX6SL Debug UART"
 393                 depends on SOC_IMX6SL
 394                 help
 395                   Say Y here if you want kernel low-level debugging support
 396                   on i.MX6SL.
 397
 398         config DEBUG_IMX6SX_UART
 399                 bool "i.MX6SX Debug UART"
 400                 depends on SOC_IMX6SX
 401                 help
 402                   Say Y here if you want kernel low-level debugging support
 403                   on i.MX6SX.
 404
 405         config DEBUG_KEYSTONE_UART0
 406                 bool "Kernel low-level debugging on KEYSTONE2 using UART0"
 407                 depends on ARCH_KEYSTONE
 408                 select DEBUG_UART_8250
 409                 help
 410                   Say Y here if you want the debug print routines to direct
 411                   their output to UART0 serial port on KEYSTONE2 devices.
 412
 413         config DEBUG_KEYSTONE_UART1
 414                 bool "Kernel low-level debugging on KEYSTONE2 using UART1"
 415                 depends on ARCH_KEYSTONE
 416                 select DEBUG_UART_8250
 417                 help
 418                   Say Y here if you want the debug print routines to direct
 419                   their output to UART1 serial port on KEYSTONE2 devices.
 420
 421         config DEBUG_KS8695_UART
 422                 bool "KS8695 Debug UART"
 423                 depends on ARCH_KS8695
 424                 help
 425                   Say Y here if you want kernel low-level debugging support
 426                   on KS8695.
 427
 428         config DEBUG_MESON_UARTAO
 429                 bool "Kernel low-level debugging via Meson6 UARTAO"
 430                 depends on ARCH_MESON
 431                 help
 432                   Say Y here if you want kernel low-lever debugging support
 433                   on Amlogic Meson6 based platforms on the UARTAO.
 434
 435         config DEBUG_MMP_UART2
 436                 bool "Kernel low-level debugging message via MMP UART2"
 437                 depends on ARCH_MMP
 438                 select DEBUG_UART_8250
 439                 help
 440                   Say Y here if you want kernel low-level debugging support
 441                   on MMP UART2.
 442
 443         config DEBUG_MMP_UART3
 444                 bool "Kernel low-level debugging message via MMP UART3"
 445                 depends on ARCH_MMP
 446                 select DEBUG_UART_8250
 447                 help
 448                   Say Y here if you want kernel low-level debugging support
 449                   on MMP UART3.
 450
 451         config DEBUG_MSM_UART
 452                 bool "Kernel low-level debugging messages via MSM UART"
 453                 depends on ARCH_MSM
 454                 help
 455                   Say Y here if you want the debug print routines to direct
 456                   their output to the serial port on MSM devices.
 457
 458                   ARCH                DEBUG_UART_PHYS   DEBUG_UART_VIRT   #
 459                   MSM7X00A, QSD8X50   0xa9a00000        0xe1000000        UART1
 460                   MSM7X00A, QSD8X50   0xa9b00000        0xe1000000        UART2
 461                   MSM7X00A, QSD8X50   0xa9c00000        0xe1000000        UART3
 462
 463                   MSM7X30             0xaca00000        0xe1000000        UART1
 464                   MSM7X30             0xacb00000        0xe1000000        UART2
 465                   MSM7X30             0xacc00000        0xe1000000        UART3
 466
 467                   Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
 468                   options based on your needs.
 469
 470         config DEBUG_QCOM_UARTDM
 471                 bool "Kernel low-level debugging messages via QCOM UARTDM"
 472                 depends on ARCH_QCOM
 473                 help
 474                   Say Y here if you want the debug print routines to direct
 475                   their output to the serial port on Qualcomm devices.
 476
 477                   ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT
 478                   APQ8064   0x16640000        0xf0040000
 479                   APQ8084   0xf995e000        0xfa75e000
 480                   MSM8X60   0x19c40000        0xf0040000
 481                   MSM8960   0x16440000        0xf0040000
 482                   MSM8974   0xf991e000        0xfa71e000
 483
 484                   Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
 485                   options based on your needs.
 486
 487         config DEBUG_MVEBU_UART0
 488                 bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
 489                 depends on ARCH_MVEBU
 490                 select DEBUG_UART_8250
 491                 help
 492                   Say Y here if you want kernel low-level debugging support
 493                   on MVEBU based platforms on UART0.
 494
 495                   This option should be used with the old bootloaders
 496                   that left the internal registers mapped at
 497                   0xd0000000. As of today, this is the case on
 498                   platforms such as the Globalscale Mirabox or the
 499                   Plathome OpenBlocks AX3, when using the original
 500                   bootloader.
 501
 502                   If the wrong DEBUG_MVEBU_UART* option is selected,
 503                   when u-boot hands over to the kernel, the system
 504                   silently crashes, with no serial output at all.
 505
 506         config DEBUG_MVEBU_UART0_ALTERNATE
 507                 bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
 508                 depends on ARCH_MVEBU
 509                 select DEBUG_UART_8250
 510                 help
 511                   Say Y here if you want kernel low-level debugging support
 512                   on MVEBU based platforms on UART0.
 513
 514                   This option should be used with the new bootloaders
 515                   that remap the internal registers at 0xf1000000.
 516
 517                   If the wrong DEBUG_MVEBU_UART* option is selected,
 518                   when u-boot hands over to the kernel, the system
 519                   silently crashes, with no serial output at all.
 520
 521         config DEBUG_MVEBU_UART1_ALTERNATE
 522                 bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)"
 523                 depends on ARCH_MVEBU
 524                 select DEBUG_UART_8250
 525                 help
 526                   Say Y here if you want kernel low-level debugging support
 527                   on MVEBU based platforms on UART1.
 528
 529                   This option should be used with the new bootloaders
 530                   that remap the internal registers at 0xf1000000.
 531
 532                   If the wrong DEBUG_MVEBU_UART* option is selected,
 533                   when u-boot hands over to the kernel, the system
 534                   silently crashes, with no serial output at all.
 535
 536         config DEBUG_VF_UART
 537                 bool "Vybrid UART"
 538                 depends on SOC_VF610
 539                 help
 540                   Say Y here if you want kernel low-level debugging support
 541                   on Vybrid based platforms.
 542
 543         config DEBUG_NETX_UART
 544                 bool "Kernel low-level debugging messages via NetX UART"
 545                 depends on ARCH_NETX
 546                 help
 547                   Say Y here if you want kernel low-level debugging support
 548                   on Hilscher NetX based platforms.
 549
 550         config DEBUG_NOMADIK_UART
 551                 bool "Kernel low-level debugging messages via NOMADIK UART"
 552                 depends on ARCH_NOMADIK
 553                 select DEBUG_UART_PL01X
 554                 help
 555                   Say Y here if you want kernel low-level debugging support
 556                   on NOMADIK based platforms.
 557
 558         config DEBUG_NSPIRE_CLASSIC_UART
 559                 bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
 560                 depends on ARCH_NSPIRE
 561                 select DEBUG_UART_8250
 562                 help
 563                   Say Y here if you want kernel low-level debugging support
 564                   on TI-NSPIRE classic models.
 565
 566         config DEBUG_NSPIRE_CX_UART
 567                 bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
 568                 depends on ARCH_NSPIRE
 569                 select DEBUG_UART_PL01X
 570                 help
 571                   Say Y here if you want kernel low-level debugging support
 572                   on TI-NSPIRE CX models.
 573
 574         config DEBUG_OMAP1UART1
 575                 bool "Kernel low-level debugging via OMAP1 UART1"
 576                 depends on ARCH_OMAP1
 577                 select DEBUG_UART_8250
 578                 help
 579                   Say Y here if you want kernel low-level debugging support
 580                   on OMAP1 based platforms (except OMAP730) on the UART1.
 581
 582         config DEBUG_OMAP1UART2
 583                 bool "Kernel low-level debugging via OMAP1 UART2"
 584                 depends on ARCH_OMAP1
 585                 select DEBUG_UART_8250
 586                 help
 587                   Say Y here if you want kernel low-level debugging support
 588                   on OMAP1 based platforms (except OMAP730) on the UART2.
 589
 590         config DEBUG_OMAP1UART3
 591                 bool "Kernel low-level debugging via OMAP1 UART3"
 592                 depends on ARCH_OMAP1
 593                 select DEBUG_UART_8250
 594                 help
 595                   Say Y here if you want kernel low-level debugging support
 596                   on OMAP1 based platforms (except OMAP730) on the UART3.
 597
 598         config DEBUG_OMAP2UART1
 599                 bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
 600                 depends on ARCH_OMAP2PLUS
 601                 select DEBUG_OMAP2PLUS_UART
 602                 help
 603                   This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
 604                   omap3 torpedo and 3530 lv som.
 605
 606         config DEBUG_OMAP2UART2
 607                 bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
 608                 depends on ARCH_OMAP2PLUS
 609                 select DEBUG_OMAP2PLUS_UART
 610
 611         config DEBUG_OMAP2UART3
 612                 bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
 613                 depends on ARCH_OMAP2PLUS
 614                 select DEBUG_OMAP2PLUS_UART
 615
 616         config DEBUG_OMAP3UART3
 617                 bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
 618                 depends on ARCH_OMAP2PLUS
 619                 select DEBUG_OMAP2PLUS_UART
 620                 help
 621                   This covers at least cm_t3x, beagle, crane, devkit8000,
 622                   igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
 623                   and 3517evm.
 624
 625         config DEBUG_OMAP4UART3
 626                 bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
 627                 depends on ARCH_OMAP2PLUS
 628                 select DEBUG_OMAP2PLUS_UART
 629
 630         config DEBUG_OMAP3UART4
 631                 bool "Kernel low-level debugging messages via OMAP36XX UART4"
 632                 depends on ARCH_OMAP2PLUS
 633                 select DEBUG_OMAP2PLUS_UART
 634
 635         config DEBUG_OMAP4UART4
 636                 bool "Kernel low-level debugging messages via OMAP4/5 UART4"
 637                 depends on ARCH_OMAP2PLUS
 638                 select DEBUG_OMAP2PLUS_UART
 639
 640         config DEBUG_OMAP7XXUART1
 641                 bool "Kernel low-level debugging via OMAP730 UART1"
 642                 depends on ARCH_OMAP730
 643                 select DEBUG_UART_8250
 644                 help
 645                   Say Y here if you want kernel low-level debugging support
 646                   on OMAP730 based platforms on the UART1.
 647
 648         config DEBUG_OMAP7XXUART2
 649                 bool "Kernel low-level debugging via OMAP730 UART2"
 650                 depends on ARCH_OMAP730
 651                 select DEBUG_UART_8250
 652                 help
 653                   Say Y here if you want kernel low-level debugging support
 654                   on OMAP730 based platforms on the UART2.
 655
 656         config DEBUG_OMAP7XXUART3
 657                 bool "Kernel low-level debugging via OMAP730 UART3"
 658                 depends on ARCH_OMAP730
 659                 select DEBUG_UART_8250
 660                 help
 661                   Say Y here if you want kernel low-level debugging support
 662                   on OMAP730 based platforms on the UART3.
 663
 664         config DEBUG_TI81XXUART1
 665                 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 666                 depends on ARCH_OMAP2PLUS
 667                 select DEBUG_OMAP2PLUS_UART
 668
 669         config DEBUG_TI81XXUART2
 670                 bool "Kernel low-level debugging messages via TI81XX UART2"
 671                 depends on ARCH_OMAP2PLUS
 672                 select DEBUG_OMAP2PLUS_UART
 673
 674         config DEBUG_TI81XXUART3
 675                 bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
 676                 depends on ARCH_OMAP2PLUS
 677                 select DEBUG_OMAP2PLUS_UART
 678
 679         config DEBUG_AM33XXUART1
 680                 bool "Kernel low-level debugging messages via AM33XX UART1"
 681                 depends on ARCH_OMAP2PLUS
 682                 select DEBUG_OMAP2PLUS_UART
 683
 684         config DEBUG_ZOOM_UART
 685                 bool "Kernel low-level debugging messages via Zoom2/3 UART"
 686                 depends on ARCH_OMAP2PLUS
 687                 select DEBUG_OMAP2PLUS_UART
 688
 689         config DEBUG_PICOXCELL_UART
 690                 depends on ARCH_PICOXCELL
 691                 bool "Use PicoXcell UART for low-level debug"
 692                 select DEBUG_UART_8250
 693                 help
 694                   Say Y here if you want kernel low-level debugging support
 695                   on PicoXcell based platforms.
 696
 697         config DEBUG_PXA_UART1
 698                 depends on ARCH_PXA
 699                 bool "Use PXA UART1 for low-level debug"
 700                 select DEBUG_UART_8250
 701                 help
 702                   Say Y here if you want kernel low-level debugging support
 703                   on PXA UART1.
 704
 705         config DEBUG_REALVIEW_STD_PORT
 706                 bool "RealView Default UART"
 707                 depends on ARCH_REALVIEW
 708                 select DEBUG_UART_PL01X
 709                 help
 710                   Say Y here if you want the debug print routines to direct
 711                   their output to the serial port on RealView EB, PB11MP, PBA8
 712                   and PBX platforms.
 713
 714         config DEBUG_REALVIEW_PB1176_PORT
 715                 bool "RealView PB1176 UART"
 716                 depends on MACH_REALVIEW_PB1176
 717                 select DEBUG_UART_PL01X
 718                 help
 719                   Say Y here if you want the debug print routines to direct
 720                   their output to the standard serial port on the RealView
 721                   PB1176 platform.
 722
 723         config DEBUG_RK29_UART0
 724                 bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
 725                 depends on ARCH_ROCKCHIP
 726                 select DEBUG_UART_8250
 727                 help
 728                   Say Y here if you want kernel low-level debugging support
 729                   on Rockchip based platforms.
 730
 731         config DEBUG_RK29_UART1
 732                 bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
 733                 depends on ARCH_ROCKCHIP
 734                 select DEBUG_UART_8250
 735                 help
 736                   Say Y here if you want kernel low-level debugging support
 737                   on Rockchip based platforms.
 738
 739         config DEBUG_RK29_UART2
 740                 bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
 741                 depends on ARCH_ROCKCHIP
 742                 select DEBUG_UART_8250
 743                 help
 744                   Say Y here if you want kernel low-level debugging support
 745                   on Rockchip based platforms.
 746
 747         config DEBUG_RK3X_UART0
 748                 bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0"
 749                 depends on ARCH_ROCKCHIP
 750                 select DEBUG_UART_8250
 751                 help
 752                   Say Y here if you want kernel low-level debugging support
 753                   on Rockchip based platforms.
 754
 755         config DEBUG_RK3X_UART1
 756                 bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1"
 757                 depends on ARCH_ROCKCHIP
 758                 select DEBUG_UART_8250
 759                 help
 760                   Say Y here if you want kernel low-level debugging support
 761                   on Rockchip based platforms.
 762
 763         config DEBUG_RK3X_UART2
 764                 bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2"
 765                 depends on ARCH_ROCKCHIP
 766                 select DEBUG_UART_8250
 767                 help
 768                   Say Y here if you want kernel low-level debugging support
 769                   on Rockchip based platforms.
 770
 771         config DEBUG_RK3X_UART3
 772                 bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3"
 773                 depends on ARCH_ROCKCHIP
 774                 select DEBUG_UART_8250
 775                 help
 776                   Say Y here if you want kernel low-level debugging support
 777                   on Rockchip based platforms.
 778
 779         config DEBUG_RK32_UART2
 780                 bool "Kernel low-level debugging messages via Rockchip RK32 UART2"
 781                 depends on ARCH_ROCKCHIP
 782                 select DEBUG_UART_8250
 783                 help
 784                   Say Y here if you want kernel low-level debugging support
 785                   on Rockchip RK32xx based platforms.
 786
 787         config DEBUG_R7S72100_SCIF2
 788                 bool "Kernel low-level debugging messages via SCIF2 on R7S72100"
 789                 depends on ARCH_R7S72100
 790                 help
 791                   Say Y here if you want kernel low-level debugging support
 792                   via SCIF2 on Renesas RZ/A1H (R7S72100).
 793
 794         config DEBUG_RCAR_GEN1_SCIF0
 795                 bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
 796                 depends on ARCH_R8A7778
 797                 help
 798                   Say Y here if you want kernel low-level debugging support
 799                   via SCIF0 on Renesas R-Car M1A (R8A7778).
 800
 801         config DEBUG_RCAR_GEN1_SCIF2
 802                 bool "Kernel low-level debugging messages via SCIF2 on R8A7779"
 803                 depends on ARCH_R8A7779
 804                 help
 805                   Say Y here if you want kernel low-level debugging support
 806                   via SCIF2 on Renesas R-Car H1 (R8A7779).
 807
 808         config DEBUG_RCAR_GEN2_SCIF0
 809                 bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)"
 810                 depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
 811                 help
 812                   Say Y here if you want kernel low-level debugging support
 813                   via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or
 814                   M2-N (R8A7793).
 815
 816         config DEBUG_RCAR_GEN2_SCIF2
 817                 bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
 818                 depends on ARCH_R8A7794
 819                 help
 820                   Say Y here if you want kernel low-level debugging support
 821                   via SCIF2 on Renesas R-Car E2 (R8A7794).
 822
 823         config DEBUG_RMOBILE_SCIFA0
 824                 bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372"
 825                 depends on ARCH_R8A73A4 || ARCH_SH7372
 826                 help
 827                   Say Y here if you want kernel low-level debugging support
 828                   via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile
 829                   AP4 (SH7372).
 830
 831         config DEBUG_RMOBILE_SCIFA1
 832                 bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
 833                 depends on ARCH_R8A7740
 834                 help
 835                   Say Y here if you want kernel low-level debugging support
 836                   via SCIFA1 on Renesas R-Mobile A1 (R8A7740).
 837
 838         config DEBUG_RMOBILE_SCIFA4
 839                 bool "Kernel low-level debugging messages via SCIFA4 on SH73A0"
 840                 depends on ARCH_SH73A0
 841                 help
 842                   Say Y here if you want kernel low-level debugging support
 843                   via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
 844
 845         config DEBUG_S3C_UART0
 846                 depends on PLAT_SAMSUNG
 847                 select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 848                 select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 849                 select DEBUG_S5PV210_UART if ARCH_S5PV210
 850                 bool "Use Samsung S3C UART 0 for low-level debug"
 851                 help
 852                   Say Y here if you want the debug print routines to direct
 853                   their output to UART 0. The port must have been initialised
 854                   by the boot-loader before use.
 855
 856         config DEBUG_S3C_UART1
 857                 depends on PLAT_SAMSUNG
 858                 select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 859                 select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 860                 select DEBUG_S5PV210_UART if ARCH_S5PV210
 861                 bool "Use Samsung S3C UART 1 for low-level debug"
 862                 help
 863                   Say Y here if you want the debug print routines to direct
 864                   their output to UART 1. The port must have been initialised
 865                   by the boot-loader before use.
 866
 867         config DEBUG_S3C_UART2
 868                 depends on PLAT_SAMSUNG
 869                 select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 870                 select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 871                 select DEBUG_S5PV210_UART if ARCH_S5PV210
 872                 bool "Use Samsung S3C UART 2 for low-level debug"
 873                 help
 874                   Say Y here if you want the debug print routines to direct
 875                   their output to UART 2. The port must have been initialised
 876                   by the boot-loader before use.
 877
 878         config DEBUG_S3C_UART3
 879                 depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
 880                 select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 881                 select DEBUG_S5PV210_UART if ARCH_S5PV210
 882                 bool "Use Samsung S3C UART 3 for low-level debug"
 883                 help
 884                   Say Y here if you want the debug print routines to direct
 885                   their output to UART 3. The port must have been initialised
 886                   by the boot-loader before use.
 887
 888         config DEBUG_S3C2410_UART0
 889                 depends on ARCH_S3C24XX
 890                 select DEBUG_S3C2410_UART
 891                 bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
 892                 help
 893                   Say Y here if you want the debug print routines to direct
 894                   their output to UART 0. The port must have been initialised
 895                   by the boot-loader before use.
 896
 897         config DEBUG_S3C2410_UART1
 898                 depends on ARCH_S3C24XX
 899                 select DEBUG_S3C2410_UART
 900                 bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
 901                 help
 902                   Say Y here if you want the debug print routines to direct
 903                   their output to UART 1. The port must have been initialised
 904                   by the boot-loader before use.
 905
 906         config DEBUG_S3C2410_UART2
 907                 depends on ARCH_S3C24XX
 908                 select DEBUG_S3C2410_UART
 909                 bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
 910                 help
 911                   Say Y here if you want the debug print routines to direct
 912                   their output to UART 2. The port must have been initialised
 913                   by the boot-loader before use.
 914
 915         config DEBUG_SA1100
 916                 depends on ARCH_SA1100
 917                 bool "Use SA1100 UARTs for low-level debug"
 918                 help
 919                   Say Y here if you want kernel low-level debugging support
 920                   on SA-11x0 UART ports. The kernel will check for the first
 921                   enabled UART in a sequence 3-1-2.
 922
 923         config DEBUG_SOCFPGA_UART
 924                 depends on ARCH_SOCFPGA
 925                 bool "Use SOCFPGA UART for low-level debug"
 926                 select DEBUG_UART_8250
 927                 help
 928                   Say Y here if you want kernel low-level debugging support
 929                   on SOCFPGA based platforms.
 930
 931         config DEBUG_SUN9I_UART0
 932                 bool "Kernel low-level debugging messages via sun9i UART0"
 933                 depends on MACH_SUN9I
 934                 select DEBUG_UART_8250
 935                 help
 936                   Say Y here if you want kernel low-level debugging support
 937                   on Allwinner A80 based platforms on the UART0.
 938
 939         config DEBUG_SUNXI_UART0
 940                 bool "Kernel low-level debugging messages via sunXi UART0"
 941                 depends on ARCH_SUNXI
 942                 select DEBUG_UART_8250
 943                 help
 944                   Say Y here if you want kernel low-level debugging support
 945                   on Allwinner A1X based platforms on the UART0.
 946
 947         config DEBUG_SUNXI_UART1
 948                 bool "Kernel low-level debugging messages via sunXi UART1"
 949                 depends on ARCH_SUNXI
 950                 select DEBUG_UART_8250
 951                 help
 952                   Say Y here if you want kernel low-level debugging support
 953                   on Allwinner A1X based platforms on the UART1.
 954
 955         config DEBUG_SUNXI_R_UART
 956                 bool "Kernel low-level debugging messages via sunXi R_UART"
 957                 depends on MACH_SUN6I || MACH_SUN8I
 958                 select DEBUG_UART_8250
 959                 help
 960                   Say Y here if you want kernel low-level debugging support
 961                   on Allwinner A31/A23 based platforms on the R_UART.
 962
 963         config TEGRA_DEBUG_UART_AUTO_ODMDATA
 964                 bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
 965                 depends on ARCH_TEGRA
 966                 select DEBUG_TEGRA_UART
 967                 help
 968                   Automatically determines which UART to use for low-level
 969                   debug based on the ODMDATA value. This value is part of
 970                   the BCT, and is written to the boot memory device using
 971                   nvflash, or other flashing tool.  When bits 19:18 are 3,
 972                   then bits 17:15 indicate which UART to use; 0/1/2/3/4
 973                   are UART A/B/C/D/E.
 974
 975         config TEGRA_DEBUG_UARTA
 976                 bool "Kernel low-level debugging messages via Tegra UART A"
 977                 depends on ARCH_TEGRA
 978                 select DEBUG_TEGRA_UART
 979                 help
 980                   Say Y here if you want kernel low-level debugging support
 981                   on Tegra based platforms.
 982
 983         config TEGRA_DEBUG_UARTB
 984                 bool "Kernel low-level debugging messages via Tegra UART B"
 985                 depends on ARCH_TEGRA
 986                 select DEBUG_TEGRA_UART
 987                 help
 988                   Say Y here if you want kernel low-level debugging support
 989                   on Tegra based platforms.
 990
 991         config TEGRA_DEBUG_UARTC
 992                 bool "Kernel low-level debugging messages via Tegra UART C"
 993                 depends on ARCH_TEGRA
 994                 select DEBUG_TEGRA_UART
 995                 help
 996                   Say Y here if you want kernel low-level debugging support
 997                   on Tegra based platforms.
 998
 999         config TEGRA_DEBUG_UARTD
1000                 bool "Kernel low-level debugging messages via Tegra UART D"
1001                 depends on ARCH_TEGRA
1002                 select DEBUG_TEGRA_UART
1003                 help
1004                   Say Y here if you want kernel low-level debugging support
1005                   on Tegra based platforms.
1006
1007         config TEGRA_DEBUG_UARTE
1008                 bool "Kernel low-level debugging messages via Tegra UART E"
1009                 depends on ARCH_TEGRA
1010                 select DEBUG_TEGRA_UART
1011                 help
1012                   Say Y here if you want kernel low-level debugging support
1013                   on Tegra based platforms.
1014
1015         config DEBUG_SIRFPRIMA2_UART1
1016                 bool "Kernel low-level debugging messages via SiRFprimaII UART1"
1017                 depends on ARCH_PRIMA2
1018                 select DEBUG_SIRFSOC_UART
1019                 help
1020                   Say Y here if you want the debug print routines to direct
1021                   their output to the uart1 port on SiRFprimaII devices.
1022
1023         config DEBUG_SIRFATLAS7_UART0
1024                 bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
1025                 depends on ARCH_ATLAS7
1026                 select DEBUG_SIRFSOC_UART
1027                 help
1028                   Say Y here if you want the debug print routines to direct
1029                   their output to the uart0 port on SiRFATLAS7 devices.The uart0
1030                   is used on SiRFATLAS7 as a extra debug port.sometimes an extra
1031                   debug port can be very useful.
1032
1033         config DEBUG_SIRFATLAS7_UART1
1034                 bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
1035                 depends on ARCH_ATLAS7
1036                 select DEBUG_SIRFSOC_UART
1037                 help
1038                   Say Y here if you want the debug print routines to direct
1039                   their output to the uart1 port on SiRFATLAS7 devices.
1040
1041         config STIH41X_DEBUG_ASC2
1042                 bool "Use StiH415/416 ASC2 UART for low-level debug"
1043                 depends on ARCH_STI
1044                 select DEBUG_STI_UART
1045                 help
1046                   Say Y here if you want kernel low-level debugging support
1047                   on STiH415/416 based platforms like b2000, which has
1048                   default UART wired up to ASC2.
1049
1050                   If unsure, say N.
1051
1052         config STIH41X_DEBUG_SBC_ASC1
1053                 bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
1054                 depends on ARCH_STI
1055                 select DEBUG_STI_UART
1056                 help
1057                   Say Y here if you want kernel low-level debugging support
1058                   on STiH415/416 based platforms like b2020. which has
1059                   default UART wired up to SBC ASC1.
1060
1061                   If unsure, say N.
1062
1063         config DEBUG_U300_UART
1064                 bool "Kernel low-level debugging messages via U300 UART0"
1065                 depends on ARCH_U300
1066                 select DEBUG_UART_PL01X
1067                 help
1068                   Say Y here if you want the debug print routines to direct
1069                   their output to the uart port on U300 devices.
1070
1071         config DEBUG_UX500_UART
1072                 depends on ARCH_U8500
1073                 bool "Use Ux500 UART for low-level debug"
1074                 help
1075                   Say Y here if you want kernel low-level debugging support
1076                   on Ux500 based platforms.
1077
1078         config DEBUG_MT6589_UART0
1079                 bool "Mediatek mt6589 UART0"
1080                 depends on ARCH_MEDIATEK
1081                 select DEBUG_UART_8250
1082                 help
1083                   Say Y here if you want kernel low-level debugging support
1084                   for Mediatek mt6589 based platforms on UART0.
1085
1086         config DEBUG_MT8127_UART0
1087                 bool "Mediatek mt8127/mt6592 UART0"
1088                 depends on ARCH_MEDIATEK
1089                 select DEBUG_UART_8250
1090                 help
1091                   Say Y here if you want kernel low-level debugging support
1092                   for Mediatek mt8127 based platforms on UART0.
1093
1094         config DEBUG_MT8135_UART3
1095                 bool "Mediatek mt8135 UART3"
1096                 depends on ARCH_MEDIATEK
1097                 select DEBUG_UART_8250
1098                 help
1099                   Say Y here if you want kernel low-level debugging support
1100                   for Mediatek mt8135 based platforms on UART3.
1101
1102         config DEBUG_VEXPRESS_UART0_DETECT
1103                 bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
1104                 depends on ARCH_VEXPRESS && CPU_CP15_MMU
1105                 help
1106                   This option enables a simple heuristic which tries to determine
1107                   the motherboard's memory map variant (original or RS1) and then
1108                   choose the relevant UART0 base address.
1109
1110                   Note that this will only work with standard A-class core tiles,
1111                   and may fail with non-standard SMM or custom software models.
1112
1113         config DEBUG_VEXPRESS_UART0_CA9
1114                 bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
1115                 depends on ARCH_VEXPRESS
1116                 select DEBUG_UART_PL01X
1117                 help
1118                   This option selects UART0 at 0x10009000. Except for custom models,
1119                   this applies only to the V2P-CA9 tile.
1120
1121         config DEBUG_VEXPRESS_UART0_RS1
1122                 bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
1123                 depends on ARCH_VEXPRESS
1124                 select DEBUG_UART_PL01X
1125                 help
1126                   This option selects UART0 at 0x1c090000. This applies to most
1127                   of the tiles using the RS1 memory map, including all new A-class
1128                   core tiles, FPGA-based SMMs and software models.
1129
1130         config DEBUG_VEXPRESS_UART0_CRX
1131                 bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)"
1132                 depends on ARCH_VEXPRESS && !MMU
1133                 select DEBUG_UART_PL01X
1134                 help
1135                   This option selects UART0 at 0xb0090000. This is appropriate for
1136                   Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
1137
1138         config DEBUG_VT8500_UART0
1139                 bool "Use UART0 on VIA/Wondermedia SoCs"
1140                 depends on ARCH_VT8500
1141                 help
1142                   This option selects UART0 on VIA/Wondermedia System-on-a-chip
1143                   devices, including VT8500, WM8505, WM8650 and WM8850.
1144
1145         config DEBUG_ICEDCC
1146                 bool "Kernel low-level debugging via EmbeddedICE DCC channel"
1147                 help
1148                   Say Y here if you want the debug print routines to direct
1149                   their output to the EmbeddedICE macrocell's DCC channel using
1150                   co-processor 14. This is known to work on the ARM9 style ICE
1151                   channel and on the XScale with the PEEDI.
1152
1153                   Note that the system will appear to hang during boot if there
1154                   is nothing connected to read from the DCC.
1155
1156         config DEBUG_SEMIHOSTING
1157                 bool "Kernel low-level debug output via semihosting I/O"
1158                 help
1159                   Semihosting enables code running on an ARM target to use
1160                   the I/O facilities on a host debugger/emulator through a
1161                   simple SVC call. The host debugger or emulator must have
1162                   semihosting enabled for the special svc call to be trapped
1163                   otherwise the kernel will crash.
1164
1165                   This is known to work with OpenOCD, as well as
1166                   ARM's Fast Models, or any other controlling environment
1167                   that implements semihosting.
1168
1169                   For more details about semihosting, please see
1170                   chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
1171
1172         config DEBUG_LL_UART_8250
1173                 bool "Kernel low-level debugging via 8250 UART"
1174                 help
1175                   Say Y here if you wish the debug print routes to direct
1176                   their output to an 8250 UART.  You can use this option
1177                   to provide the parameters for the 8250 UART rather than
1178                   selecting one of the platform specific options above if
1179                   you know the parameters for the port.
1180
1181                   This option is preferred over the platform specific
1182                   options; the platform specific options are deprecated
1183                   and will be soon removed.
1184
1185         config DEBUG_LL_UART_EFM32
1186                 bool "Kernel low-level debugging via efm32 UART"
1187                 depends on ARCH_EFM32
1188                 help
1189                   Say Y here if you want the debug print routines to direct
1190                   their output to an UART or USART port on efm32 based
1191                   machines. Use the following addresses for DEBUG_UART_PHYS:
1192
1193                     0x4000c000 | USART0
1194                     0x4000c400 | USART1
1195                     0x4000c800 | USART2
1196                     0x4000e000 | UART0
1197                     0x4000e400 | UART1
1198
1199         config DEBUG_LL_UART_PL01X
1200                 bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
1201                 help
1202                   Say Y here if you wish the debug print routes to direct
1203                   their output to a PL01x Primecell UART.  You can use
1204                   this option to provide the parameters for the UART
1205                   rather than selecting one of the platform specific
1206                   options above if you know the parameters for the port.
1207
1208                   This option is preferred over the platform specific
1209                   options; the platform specific options are deprecated
1210                   and will be soon removed.
1211
1212 endchoice
1213
1214 config DEBUG_AT91_UART
1215         bool
1216         depends on ARCH_AT91
1217
1218 config DEBUG_EXYNOS_UART
1219         bool
1220
1221 config DEBUG_S3C2410_UART
1222         bool
1223         select DEBUG_S3C24XX_UART
1224
1225 config DEBUG_S3C24XX_UART
1226         bool
1227
1228 config DEBUG_S5PV210_UART
1229         bool
1230
1231 config DEBUG_OMAP2PLUS_UART
1232         bool
1233         depends on ARCH_OMAP2PLUS
1234
1235 config DEBUG_IMX_UART_PORT
1236         int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
1237                                                 DEBUG_IMX25_UART || \
1238                                                 DEBUG_IMX21_IMX27_UART || \
1239                                                 DEBUG_IMX31_UART || \
1240                                                 DEBUG_IMX35_UART || \
1241                                                 DEBUG_IMX50_UART || \
1242                                                 DEBUG_IMX51_UART || \
1243                                                 DEBUG_IMX53_UART || \
1244                                                 DEBUG_IMX6Q_UART || \
1245                                                 DEBUG_IMX6SL_UART || \
1246                                                 DEBUG_IMX6SX_UART
1247         default 1
1248         depends on ARCH_MXC
1249         help
1250           Choose UART port on which kernel low-level debug messages
1251           should be output.
1252
1253 config DEBUG_VF_UART_PORT
1254         int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
1255         default 1
1256         range 0 3
1257         depends on SOC_VF610
1258         help
1259           Choose UART port on which kernel low-level debug messages
1260           should be output.
1261
1262 config DEBUG_TEGRA_UART
1263         bool
1264         depends on ARCH_TEGRA
1265
1266 config DEBUG_STI_UART
1267         bool
1268         depends on ARCH_STI
1269
1270 config DEBUG_SIRFSOC_UART
1271         bool
1272         depends on ARCH_SIRF
1273
1274 config DEBUG_LL_INCLUDE
1275         string
1276         default "debug/sa1100.S" if DEBUG_SA1100
1277         default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
1278         default "debug/at91.S" if DEBUG_AT91_UART
1279         default "debug/asm9260.S" if DEBUG_ASM9260_UART
1280         default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
1281         default "debug/meson.S" if DEBUG_MESON_UARTAO
1282         default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
1283         default "debug/exynos.S" if DEBUG_EXYNOS_UART
1284         default "debug/efm32.S" if DEBUG_LL_UART_EFM32
1285         default "debug/icedcc.S" if DEBUG_ICEDCC
1286         default "debug/imx.S" if DEBUG_IMX1_UART || \
1287                                  DEBUG_IMX25_UART || \
1288                                  DEBUG_IMX21_IMX27_UART || \
1289                                  DEBUG_IMX31_UART || \
1290                                  DEBUG_IMX35_UART || \
1291                                  DEBUG_IMX50_UART || \
1292                                  DEBUG_IMX51_UART || \
1293                                  DEBUG_IMX53_UART ||\
1294                                  DEBUG_IMX6Q_UART || \
1295                                  DEBUG_IMX6SL_UART || \
1296                                  DEBUG_IMX6SX_UART
1297         default "debug/ks8695.S" if DEBUG_KS8695_UART
1298         default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
1299         default "debug/netx.S" if DEBUG_NETX_UART
1300         default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
1301         default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
1302         default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
1303         default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
1304         default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
1305         default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
1306         default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
1307         default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
1308         default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
1309         default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
1310         default "debug/s5pv210.S" if DEBUG_S5PV210_UART
1311         default "debug/sirf.S" if DEBUG_SIRFSOC_UART
1312         default "debug/sti.S" if DEBUG_STI_UART
1313         default "debug/tegra.S" if DEBUG_TEGRA_UART
1314         default "debug/ux500.S" if DEBUG_UX500_UART
1315         default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
1316         default "debug/vf.S" if DEBUG_VF_UART
1317         default "debug/vt8500.S" if DEBUG_VT8500_UART0
1318         default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
1319         default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
1320         default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
1321         default "mach/debug-macro.S"
1322
1323 # Compatibility options for PL01x
1324 config DEBUG_UART_PL01X
1325         bool
1326
1327 # Compatibility options for 8250
1328 config DEBUG_UART_8250
1329         def_bool ARCH_DOVE || ARCH_EBSA110 || \
1330                 (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
1331                 ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
1332                 ARCH_IOP33X || ARCH_IXP4XX || \
1333                 ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
1334
1335 # Compatibility options for BCM63xx
1336 config DEBUG_UART_BCM63XX
1337         def_bool ARCH_BCM_63XX
1338
1339 config DEBUG_UART_PHYS
1340         hex "Physical base address of debug UART"
1341         default 0x00100a00 if DEBUG_NETX_UART
1342         default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
1343         default 0x01c28000 if DEBUG_SUNXI_UART0
1344         default 0x01c28400 if DEBUG_SUNXI_UART1
1345         default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
1346         default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2
1347         default 0x01f02800 if DEBUG_SUNXI_R_UART
1348         default 0x02530c00 if DEBUG_KEYSTONE_UART0
1349         default 0x02531000 if DEBUG_KEYSTONE_UART1
1350         default 0x03010fe0 if ARCH_RPC
1351         default 0x07000000 if DEBUG_SUN9I_UART0
1352         default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
1353                                 DEBUG_VEXPRESS_UART0_CA9
1354         default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
1355         default 0x10124000 if DEBUG_RK3X_UART0
1356         default 0x10126000 if DEBUG_RK3X_UART1
1357         default 0x101f1000 if ARCH_VERSATILE
1358         default 0x101fb000 if DEBUG_NOMADIK_UART
1359         default 0x11002000 if DEBUG_MT8127_UART0
1360         default 0x11006000 if DEBUG_MT6589_UART0
1361         default 0x11009000 if DEBUG_MT8135_UART3
1362         default 0x16000000 if ARCH_INTEGRATOR
1363         default 0x18000300 if DEBUG_BCM_5301X
1364         default 0x18010000 if DEBUG_SIRFATLAS7_UART0
1365         default 0x18020000 if DEBUG_SIRFATLAS7_UART1
1366         default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
1367         default 0x20001000 if DEBUG_HIP01_UART
1368         default 0x20060000 if DEBUG_RK29_UART0
1369         default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
1370         default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
1371         default 0x20201000 if DEBUG_BCM2835
1372         default 0x3e000000 if DEBUG_BCM_KONA_UART
1373         default 0x4000e400 if DEBUG_LL_UART_EFM32
1374         default 0x40090000 if ARCH_LPC32XX
1375         default 0x40100000 if DEBUG_PXA_UART1
1376         default 0x42000000 if ARCH_GEMINI
1377         default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
1378                                 DEBUG_S3C2410_UART0)
1379         default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
1380                                 DEBUG_S3C2410_UART1)
1381         default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
1382                                 DEBUG_S3C2410_UART2)
1383         default 0x78000000 if DEBUG_CNS3XXX
1384         default 0x7c0003f8 if FOOTBRIDGE
1385         default 0x80010000 if DEBUG_ASM9260_UART
1386         default 0x80070000 if DEBUG_IMX23_UART
1387         default 0x80074000 if DEBUG_IMX28_UART
1388         default 0x80230000 if DEBUG_PICOXCELL_UART
1389         default 0x808c0000 if ARCH_EP93XX
1390         default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
1391         default 0xa9a00000 if DEBUG_MSM_UART
1392         default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
1393         default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
1394         default 0xc0013000 if DEBUG_U300_UART
1395         default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
1396         default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
1397         default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
1398         default 0xd0012000 if DEBUG_MVEBU_UART0
1399         default 0xc81004c0 if DEBUG_MESON_UARTAO
1400         default 0xd4017000 if DEBUG_MMP_UART2
1401         default 0xd4018000 if DEBUG_MMP_UART3
1402         default 0xe0000000 if ARCH_SPEAR13XX
1403         default 0xe4007000 if DEBUG_HIP04_UART
1404         default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
1405         default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
1406         default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
1407         default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
1408         default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
1409         default 0xe8008000 if DEBUG_R7S72100_SCIF2
1410         default 0xf0000be0 if ARCH_EBSA110
1411         default 0xf040ab00 if DEBUG_BRCMSTB_UART
1412         default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
1413         default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
1414         default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
1415                                 ARCH_ORION5X
1416         default 0xf7fc9000 if DEBUG_BERLIN_UART
1417         default 0xf8b00000 if DEBUG_HIX5HD2_UART
1418         default 0xf991e000 if DEBUG_QCOM_UARTDM
1419         default 0xfcb00000 if DEBUG_HI3620_UART
1420         default 0xfe800000 if ARCH_IOP32X
1421         default 0xff690000 if DEBUG_RK32_UART2
1422         default 0xffc02000 if DEBUG_SOCFPGA_UART
1423         default 0xffd82340 if ARCH_IOP13XX
1424         default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
1425         default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
1426         default 0xfff36000 if DEBUG_HIGHBANK_UART
1427         default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
1428         default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
1429         default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
1430         default 0xfffe8600 if DEBUG_UART_BCM63XX
1431         default 0xfffff700 if ARCH_IOP33X
1432         depends on ARCH_EP93XX || \
1433                 DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
1434                 DEBUG_LL_UART_EFM32 || \
1435                 DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
1436                 DEBUG_MSM_UART || DEBUG_NETX_UART || \
1437                 DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
1438                 DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
1439                 DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
1440                 DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
1441                 DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
1442                 DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
1443                 DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
1444
1445 config DEBUG_UART_VIRT
1446         hex "Virtual base address of debug UART"
1447         default 0xe0000a00 if DEBUG_NETX_UART
1448         default 0xe0010fe0 if ARCH_RPC
1449         default 0xe1000000 if DEBUG_MSM_UART
1450         default 0xf0000be0 if ARCH_EBSA110
1451         default 0xf0010000 if DEBUG_ASM9260_UART
1452         default 0xf01fb000 if DEBUG_NOMADIK_UART
1453         default 0xf0201000 if DEBUG_BCM2835
1454         default 0xf1000300 if DEBUG_BCM_5301X
1455         default 0xf1002000 if DEBUG_MT8127_UART0
1456         default 0xf1006000 if DEBUG_MT6589_UART0
1457         default 0xf1009000 if DEBUG_MT8135_UART3
1458         default 0xf11f1000 if ARCH_VERSATILE
1459         default 0xf1600000 if ARCH_INTEGRATOR
1460         default 0xf1c28000 if DEBUG_SUNXI_UART0
1461         default 0xf1c28400 if DEBUG_SUNXI_UART1
1462         default 0xf1f02800 if DEBUG_SUNXI_R_UART
1463         default 0xf6200000 if DEBUG_PXA_UART1
1464         default 0xf4090000 if ARCH_LPC32XX
1465         default 0xf4200000 if ARCH_GEMINI
1466         default 0xf7000000 if DEBUG_SUN9I_UART0
1467         default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
1468                                 DEBUG_S3C2410_UART0)
1469         default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
1470                                 DEBUG_S3C2410_UART1)
1471         default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
1472                                 DEBUG_S3C2410_UART2)
1473         default 0xf7fc9000 if DEBUG_BERLIN_UART
1474         default 0xf8007000 if DEBUG_HIP04_UART
1475         default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
1476         default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
1477         default 0xfa71e000 if DEBUG_QCOM_UARTDM
1478         default 0xfb002000 if DEBUG_CNS3XXX
1479         default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
1480         default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
1481         default 0xfc40ab00 if DEBUG_BRCMSTB_UART
1482         default 0xfcfe8600 if DEBUG_UART_BCM63XX
1483         default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
1484         default 0xfd000000 if ARCH_SPEAR13XX
1485         default 0xfd012000 if ARCH_MV78XX0
1486         default 0xfde12000 if ARCH_DOVE
1487         default 0xfe012000 if ARCH_ORION5X
1488         default 0xf31004c0 if DEBUG_MESON_UARTAO
1489         default 0xfe017000 if DEBUG_MMP_UART2
1490         default 0xfe018000 if DEBUG_MMP_UART3
1491         default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
1492         default 0xfe230000 if DEBUG_PICOXCELL_UART
1493         default 0xfe300000 if DEBUG_BCM_KONA_UART
1494         default 0xfe800000 if ARCH_IOP32X
1495         default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
1496         default 0xfeb24000 if DEBUG_RK3X_UART0
1497         default 0xfeb26000 if DEBUG_RK3X_UART1
1498         default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
1499         default 0xfeb31000 if DEBUG_KEYSTONE_UART1
1500         default 0xfec02000 if DEBUG_SOCFPGA_UART
1501         default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
1502         default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
1503         default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
1504         default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
1505         default 0xfec20000 if DEBUG_SIRFATLAS7_UART1
1506         default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
1507         default 0xfec90000 if DEBUG_RK32_UART2
1508         default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
1509         default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
1510         default 0xfed60000 if DEBUG_RK29_UART0
1511         default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
1512         default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
1513         default 0xfedc0000 if ARCH_EP93XX
1514         default 0xfee003f8 if FOOTBRIDGE
1515         default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
1516         default 0xfee82340 if ARCH_IOP13XX
1517         default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
1518         default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
1519         default 0xfef36000 if DEBUG_HIGHBANK_UART
1520         default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
1521         default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
1522         default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
1523         default 0xfefff700 if ARCH_IOP33X
1524         default 0xff003000 if DEBUG_U300_UART
1525         default 0xffd01000 if DEBUG_HIP01_UART
1526         default DEBUG_UART_PHYS if !MMU
1527         depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
1528                 DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
1529                 DEBUG_MSM_UART || DEBUG_NETX_UART || \
1530                 DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
1531                 DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
1532                 DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
1533
1534 config DEBUG_UART_8250_SHIFT
1535         int "Register offset shift for the 8250 debug UART"
1536         depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
1537         default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \
1538                 DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
1539         default 2
1540
1541 config DEBUG_UART_8250_WORD
1542         bool "Use 32-bit accesses for 8250 UART"
1543         depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
1544         depends on DEBUG_UART_8250_SHIFT >= 2
1545         default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
1546                 ARCH_KEYSTONE || \
1547                 DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
1548                 DEBUG_DAVINCI_DA8XX_UART2 || \
1549                 DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
1550                 DEBUG_BRCMSTB_UART
1551
1552 config DEBUG_UART_8250_FLOW_CONTROL
1553         bool "Enable flow control for 8250 UART"
1554         depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
1555         default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
1556
1557 config DEBUG_UNCOMPRESS
1558         bool
1559         depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
1560         default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
1561                      (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
1562         help
1563           This option influences the normal decompressor output for
1564           multiplatform kernels.  Normally, multiplatform kernels disable
1565           decompressor output because it is not possible to know where to
1566           send the decompressor output.
1567
1568           When this option is set, the selected DEBUG_LL output method
1569           will be re-used for normal decompressor output on multiplatform
1570           kernels.
1571
1572
1573 config UNCOMPRESS_INCLUDE
1574         string
1575         default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
1576                                         PLAT_SAMSUNG || ARCH_EFM32
1577         default "mach/uncompress.h"
1578
1579 config EARLY_PRINTK
1580         bool "Early printk"
1581         depends on DEBUG_LL
1582         help
1583           Say Y here if you want to have an early console using the
1584           kernel low-level debugging functions. Add earlyprintk to your
1585           kernel parameters to enable this console.
1586
1587 config ARM_KPROBES_TEST
1588         tristate "Kprobes test module"
1589         depends on KPROBES && MODULES
1590         help
1591           Perform tests of kprobes API and instruction set simulation.
1592
1593 config PID_IN_CONTEXTIDR
1594         bool "Write the current PID to the CONTEXTIDR register"
1595         depends on CPU_COPY_V6
1596         help
1597           Enabling this option causes the kernel to write the current PID to
1598           the PROCID field of the CONTEXTIDR register, at the expense of some
1599           additional instructions during context switch. Say Y here only if you
1600           are planning to use hardware trace tools with this kernel.
1601
1602 config DEBUG_SET_MODULE_RONX
1603         bool "Set loadable kernel module data as NX and text as RO"
1604         depends on MODULES
1605         ---help---
1606           This option helps catch unintended modifications to loadable
1607           kernel module's text and read-only data. It also prevents execution
1608           of module data. Such protection may interfere with run-time code
1609           patching and dynamic kernel tracing - and they might also protect
1610           against certain classes of kernel exploits.
1611           If in doubt, say "N".
1612
1613 menuconfig CORESIGHT
1614         bool "CoreSight Tracing Support"
1615         select ARM_AMBA
1616         help
1617           This framework provides a kernel interface for the CoreSight debug
1618           and trace drivers to register themselves with. It's intended to build
1619           a topological view of the CoreSight components based on a DT
1620           specification and configure the right serie of components when a
1621           trace source gets enabled.
1622
1623 if CORESIGHT
1624 config CORESIGHT_LINKS_AND_SINKS
1625         bool "CoreSight Link and Sink drivers"
1626         help
1627           This enables support for CoreSight link and sink drivers that are
1628           responsible for transporting and collecting the trace data
1629           respectively.  Link and sinks are dynamically aggregated with a trace
1630           entity at run time to form a complete trace path.
1631
1632 config CORESIGHT_LINK_AND_SINK_TMC
1633         bool "Coresight generic TMC driver"
1634         depends on CORESIGHT_LINKS_AND_SINKS
1635         help
1636           This enables support for the Trace Memory Controller driver.  Depending
1637           on its configuration the device can act as a link (embedded trace router
1638           - ETR) or sink (embedded trace FIFO).  The driver complies with the
1639           generic implementation of the component without special enhancement or
1640           added features.
1641
1642 config CORESIGHT_SINK_TPIU
1643         bool "Coresight generic TPIU driver"
1644         depends on CORESIGHT_LINKS_AND_SINKS
1645         help
1646           This enables support for the Trace Port Interface Unit driver, responsible
1647           for bridging the gap between the on-chip coresight components and a trace
1648           port collection engine, typically connected to an external host for use
1649           case capturing more traces than the on-board coresight memory can handle.
1650
1651 config CORESIGHT_SINK_ETBV10
1652         bool "Coresight ETBv1.0 driver"
1653         depends on CORESIGHT_LINKS_AND_SINKS
1654         help
1655           This enables support for the Embedded Trace Buffer version 1.0 driver
1656           that complies with the generic implementation of the component without
1657           special enhancement or added features.
1658
1659 config CORESIGHT_SOURCE_ETM3X
1660         bool "CoreSight Embedded Trace Macrocell 3.x driver"
1661         select CORESIGHT_LINKS_AND_SINKS
1662         help
1663           This driver provides support for processor ETM3.x and PTM1.x modules,
1664           which allows tracing the instructions that a processor is executing
1665           This is primarily useful for instruction level tracing.  Depending
1666           the ETM version data tracing may also be available.
1667 endif
1668 endmenu