arch/arm/boot/dts/armada-xp-mv78260.dtsi

   1 /*
   2  * Device Tree Include file for Marvell Armada XP family SoC
   3  *
   4  * Copyright (C) 2012 Marvell
   5  *
   6  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
   7  *
   8  * This file is dual-licensed: you can use it either under the terms
   9  * of the GPL or the X11 license, at your option. Note that this dual
  10  * licensing only applies to this file, and not this project as a
  11  * whole.
  12  *
  13  *  a) This file is free software; you can redistribute it and/or
  14  *     modify it under the terms of the GNU General Public License as
  15  *     published by the Free Software Foundation; either version 2 of the
  16  *     License, or (at your option) any later version.
  17  *
  18  *     This file is distributed in the hope that it will be useful
  19  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *     GNU General Public License for more details.
  22  *
  23  * Or, alternatively
  24  *
  25  *  b) Permission is hereby granted, free of charge, to any person
  26  *     obtaining a copy of this software and associated documentation
  27  *     files (the "Software"), to deal in the Software without
  28  *     restriction, including without limitation the rights to use
  29  *     copy, modify, merge, publish, distribute, sublicense, and/or
  30  *     sell copies of the Software, and to permit persons to whom the
  31  *     Software is furnished to do so, subject to the following
  32  *     conditions:
  33  *
  34  *     The above copyright notice and this permission notice shall be
  35  *     included in all copies or substantial portions of the Software.
  36  *
  37  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  38  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  39  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  40  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  41  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  42  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  43  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  44  *     OTHER DEALINGS IN THE SOFTWARE.
  45  *
  46  * Contains definitions specific to the Armada XP MV78260 SoC that are not
  47  * common to all Armada XP SoCs.
  48  */
  49
  50 #include "armada-xp.dtsi"
  51
  52 / {
  53         model = "Marvell Armada XP MV78260 SoC";
  54         compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
  55
  56         aliases {
  57                 gpio0 = &gpio0;
  58                 gpio1 = &gpio1;
  59                 gpio2 = &gpio2;
  60                 eth3 = &eth3;
  61         };
  62
  63         cpus {
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66                 enable-method = "marvell,armada-xp-smp";
  67
  68                 cpu@0 {
  69                         device_type = "cpu";
  70                         compatible = "marvell,sheeva-v7";
  71                         reg = <0>;
  72                         clocks = <&cpuclk 0>;
  73                         clock-latency = <1000000>;
  74                 };
  75
  76                 cpu@1 {
  77                         device_type = "cpu";
  78                         compatible = "marvell,sheeva-v7";
  79                         reg = <1>;
  80                         clocks = <&cpuclk 1>;
  81                         clock-latency = <1000000>;
  82                 };
  83         };
  84
  85         soc {
  86                 /*
  87                  * MV78260 has 3 PCIe units Gen2.0: Two units can be
  88                  * configured as x4 or quad x1 lanes. One unit is
  89                  * x4 only.
  90                  */
  91                 pcie-controller {
  92                         compatible = "marvell,armada-xp-pcie";
  93                         status = "disabled";
  94                         device_type = "pci";
  95
  96                         #address-cells = <3>;
  97                         #size-cells = <2>;
  98
  99                         msi-parent = <&mpic>;
 100                         bus-range = <0x00 0xff>;
 101
 102                         ranges =
 103                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
 104                                 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
 105                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
 106                                 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
 107                                 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
 108                                 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
 109                                 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
 110                                 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
 111                                 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
 112                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
 113                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
 114                                 0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
 115                                 0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
 116                                 0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
 117                                 0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
 118                                 0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
 119                                 0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
 120
 121                                 0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
 122                                 0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
 123                                 0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
 124                                 0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
 125                                 0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
 126                                 0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
 127                                 0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
 128                                 0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
 129
 130                                 0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
 131                                 0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
 132
 133                         pcie@1,0 {
 134                                 device_type = "pci";
 135                                 assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 136                                 reg = <0x0800 0 0 0 0>;
 137                                 #address-cells = <3>;
 138                                 #size-cells = <2>;
 139                                 #interrupt-cells = <1>;
 140                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 141                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
 142                                 interrupt-map-mask = <0 0 0 0>;
 143                                 interrupt-map = <0 0 0 0 &mpic 58>;
 144                                 marvell,pcie-port = <0>;
 145                                 marvell,pcie-lane = <0>;
 146                                 clocks = <&gateclk 5>;
 147                                 status = "disabled";
 148                         };
 149
 150                         pcie@2,0 {
 151                                 device_type = "pci";
 152                                 assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 153                                 reg = <0x1000 0 0 0 0>;
 154                                 #address-cells = <3>;
 155                                 #size-cells = <2>;
 156                                 #interrupt-cells = <1>;
 157                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 158                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 159                                 interrupt-map-mask = <0 0 0 0>;
 160                                 interrupt-map = <0 0 0 0 &mpic 59>;
 161                                 marvell,pcie-port = <0>;
 162                                 marvell,pcie-lane = <1>;
 163                                 clocks = <&gateclk 6>;
 164                                 status = "disabled";
 165                         };
 166
 167                         pcie@3,0 {
 168                                 device_type = "pci";
 169                                 assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 170                                 reg = <0x1800 0 0 0 0>;
 171                                 #address-cells = <3>;
 172                                 #size-cells = <2>;
 173                                 #interrupt-cells = <1>;
 174                                 ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 175                                           0x81000000 0 0 0x81000000 0x3 0 1 0>;
 176                                 interrupt-map-mask = <0 0 0 0>;
 177                                 interrupt-map = <0 0 0 0 &mpic 60>;
 178                                 marvell,pcie-port = <0>;
 179                                 marvell,pcie-lane = <2>;
 180                                 clocks = <&gateclk 7>;
 181                                 status = "disabled";
 182                         };
 183
 184                         pcie@4,0 {
 185                                 device_type = "pci";
 186                                 assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 187                                 reg = <0x2000 0 0 0 0>;
 188                                 #address-cells = <3>;
 189                                 #size-cells = <2>;
 190                                 #interrupt-cells = <1>;
 191                                 ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 192                                           0x81000000 0 0 0x81000000 0x4 0 1 0>;
 193                                 interrupt-map-mask = <0 0 0 0>;
 194                                 interrupt-map = <0 0 0 0 &mpic 61>;
 195                                 marvell,pcie-port = <0>;
 196                                 marvell,pcie-lane = <3>;
 197                                 clocks = <&gateclk 8>;
 198                                 status = "disabled";
 199                         };
 200
 201                         pcie@5,0 {
 202                                 device_type = "pci";
 203                                 assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 204                                 reg = <0x2800 0 0 0 0>;
 205                                 #address-cells = <3>;
 206                                 #size-cells = <2>;
 207                                 #interrupt-cells = <1>;
 208                                 ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 209                                           0x81000000 0 0 0x81000000 0x5 0 1 0>;
 210                                 interrupt-map-mask = <0 0 0 0>;
 211                                 interrupt-map = <0 0 0 0 &mpic 62>;
 212                                 marvell,pcie-port = <1>;
 213                                 marvell,pcie-lane = <0>;
 214                                 clocks = <&gateclk 9>;
 215                                 status = "disabled";
 216                         };
 217
 218                         pcie@6,0 {
 219                                 device_type = "pci";
 220                                 assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
 221                                 reg = <0x3000 0 0 0 0>;
 222                                 #address-cells = <3>;
 223                                 #size-cells = <2>;
 224                                 #interrupt-cells = <1>;
 225                                 ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 226                                           0x81000000 0 0 0x81000000 0x6 0 1 0>;
 227                                 interrupt-map-mask = <0 0 0 0>;
 228                                 interrupt-map = <0 0 0 0 &mpic 63>;
 229                                 marvell,pcie-port = <1>;
 230                                 marvell,pcie-lane = <1>;
 231                                 clocks = <&gateclk 10>;
 232                                 status = "disabled";
 233                         };
 234
 235                         pcie@7,0 {
 236                                 device_type = "pci";
 237                                 assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
 238                                 reg = <0x3800 0 0 0 0>;
 239                                 #address-cells = <3>;
 240                                 #size-cells = <2>;
 241                                 #interrupt-cells = <1>;
 242                                 ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 243                                           0x81000000 0 0 0x81000000 0x7 0 1 0>;
 244                                 interrupt-map-mask = <0 0 0 0>;
 245                                 interrupt-map = <0 0 0 0 &mpic 64>;
 246                                 marvell,pcie-port = <1>;
 247                                 marvell,pcie-lane = <2>;
 248                                 clocks = <&gateclk 11>;
 249                                 status = "disabled";
 250                         };
 251
 252                         pcie@8,0 {
 253                                 device_type = "pci";
 254                                 assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
 255                                 reg = <0x4000 0 0 0 0>;
 256                                 #address-cells = <3>;
 257                                 #size-cells = <2>;
 258                                 #interrupt-cells = <1>;
 259                                 ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 260                                           0x81000000 0 0 0x81000000 0x8 0 1 0>;
 261                                 interrupt-map-mask = <0 0 0 0>;
 262                                 interrupt-map = <0 0 0 0 &mpic 65>;
 263                                 marvell,pcie-port = <1>;
 264                                 marvell,pcie-lane = <3>;
 265                                 clocks = <&gateclk 12>;
 266                                 status = "disabled";
 267                         };
 268
 269                         pcie@9,0 {
 270                                 device_type = "pci";
 271                                 assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
 272                                 reg = <0x4800 0 0 0 0>;
 273                                 #address-cells = <3>;
 274                                 #size-cells = <2>;
 275                                 #interrupt-cells = <1>;
 276                                 ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 277                                           0x81000000 0 0 0x81000000 0x9 0 1 0>;
 278                                 interrupt-map-mask = <0 0 0 0>;
 279                                 interrupt-map = <0 0 0 0 &mpic 99>;
 280                                 marvell,pcie-port = <2>;
 281                                 marvell,pcie-lane = <0>;
 282                                 clocks = <&gateclk 26>;
 283                                 status = "disabled";
 284                         };
 285                 };
 286
 287                 internal-regs {
 288                         gpio0: gpio@18100 {
 289                                 compatible = "marvell,orion-gpio";
 290                                 reg = <0x18100 0x40>;
 291                                 ngpios = <32>;
 292                                 gpio-controller;
 293                                 #gpio-cells = <2>;
 294                                 interrupt-controller;
 295                                 #interrupt-cells = <2>;
 296                                 interrupts = <82>, <83>, <84>, <85>;
 297                         };
 298
 299                         gpio1: gpio@18140 {
 300                                 compatible = "marvell,orion-gpio";
 301                                 reg = <0x18140 0x40>;
 302                                 ngpios = <32>;
 303                                 gpio-controller;
 304                                 #gpio-cells = <2>;
 305                                 interrupt-controller;
 306                                 #interrupt-cells = <2>;
 307                                 interrupts = <87>, <88>, <89>, <90>;
 308                         };
 309
 310                         gpio2: gpio@18180 {
 311                                 compatible = "marvell,orion-gpio";
 312                                 reg = <0x18180 0x40>;
 313                                 ngpios = <3>;
 314                                 gpio-controller;
 315                                 #gpio-cells = <2>;
 316                                 interrupt-controller;
 317                                 #interrupt-cells = <2>;
 318                                 interrupts = <91>;
 319                         };
 320
 321                         eth3: ethernet@34000 {
 322                                 compatible = "marvell,armada-370-neta";
 323                                 reg = <0x34000 0x4000>;
 324                                 interrupts = <14>;
 325                                 clocks = <&gateclk 1>;
 326                                 status = "disabled";
 327                         };
 328                 };
 329         };
 330 };
 331
 332 &pinctrl {
 333         compatible = "marvell,mv78260-pinctrl";
 334 };