arch/arm/boot/dts/armada-xp-synology-ds414.dts

   1 /*
   2  * Device Tree file for Synology DS414
   3  *
   4  * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  * Or, alternatively
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  *
  44  * Note: this Device Tree assumes that the bootloader has remapped the
  45  * internal registers to 0xf1000000 (instead of the old 0xd0000000).
  46  * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
  47  * bootloaders provided by Marvell. It is used in recent versions of
  48  * DSM software provided by Synology. Nonetheless, some earlier boards
  49  * were delivered with an older version of u-boot that left internal
  50  * registers mapped at 0xd0000000. If you have such a device you will
  51  * not be able to directly boot a kernel based on this Device Tree. In
  52  * that case, the preferred solution is to update your bootloader (e.g.
  53  * by upgrading to latest version of DSM, or building a new one and
  54  * installing it from u-boot prompt) or adjust the Devive Tree
  55  * (s/0xf1000000/0xd0000000/ in 'ranges' below).
  56  */
  57
  58 /dts-v1/;
  59
  60 #include <dt-bindings/input/input.h>
  61 #include <dt-bindings/gpio/gpio.h>
  62 #include "armada-xp-mv78230.dtsi"
  63
  64 / {
  65         model = "Synology DS414";
  66         compatible = "synology,ds414", "marvell,armadaxp-mv78230",
  67                      "marvell,armadaxp", "marvell,armada-370-xp";
  68
  69         chosen {
  70                 stdout-path = "serial0:115200n8";
  71         };
  72
  73         memory {
  74                 device_type = "memory";
  75                 reg = <0 0x00000000 0 0x40000000>; /* 1GB */
  76         };
  77
  78         soc {
  79                 ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
  80                           MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
  81
  82                 pcie-controller {
  83                         status = "okay";
  84
  85                         /*
  86                          * Connected to Marvell 88SX7042 SATA-II controller
  87                          * handling the four disks.
  88                          */
  89                         pcie@1,0 {
  90                                 /* Port 0, Lane 0 */
  91                                 status = "okay";
  92                         };
  93
  94                         /*
  95                          * Connected to EtronTech EJ168A XHCI controller
  96                          * providing the two rear USB 3.0 ports.
  97                          */
  98                         pcie@5,0 {
  99                                 /* Port 1, Lane 0 */
 100                                 status = "okay";
 101                         };
 102                 };
 103
 104                 internal-regs {
 105
 106                         /* RTC is provided by Seiko S-35390A below */
 107                         rtc@10300 {
 108                                 status = "disabled";
 109                         };
 110
 111                         spi0: spi@10600 {
 112                                 status = "okay";
 113
 114                                 spi-flash@0 {
 115                                         #address-cells = <1>;
 116                                         #size-cells = <1>;
 117                                         compatible = "micron,n25q064", "jedec,spi-nor";
 118                                         reg = <0>; /* Chip select 0 */
 119                                         spi-max-frequency = <20000000>;
 120
 121                                         /*
 122                                          * Warning!
 123                                          *
 124                                          * Synology u-boot uses its compiled-in environment
 125                                          * and it seems Synology did not care to change u-boot
 126                                          * default configuration in order to allow saving a
 127                                          * modified environment at a sensible location. So,
 128                                          * if you do a 'saveenv' under u-boot, your modified
 129                                          * environment will be saved at 1MB after the start
 130                                          * of the flash, i.e. in the middle of the uImage.
 131                                          * For that reason, it is strongly advised not to
 132                                          * change the default environment, unless you know
 133                                          * what you are doing.
 134                                          */
 135                                         partition@00000000 { /* u-boot */
 136                                                 label = "RedBoot";
 137                                                 reg = <0x00000000 0x000d0000>; /* 832KB */
 138                                         };
 139
 140                                         partition@000c0000 { /* uImage */
 141                                                 label = "zImage";
 142                                                 reg = <0x000d0000 0x002d0000>; /* 2880KB */
 143                                         };
 144
 145                                         partition@003a0000 { /* uInitramfs */
 146                                                 label = "rd.gz";
 147                                                 reg = <0x003a0000 0x00430000>; /* 4250KB */
 148                                         };
 149
 150                                         partition@007d0000 { /* MAC address and serial number */
 151                                                 label = "vendor";
 152                                                 reg = <0x007d0000 0x00010000>; /* 64KB */
 153                                         };
 154
 155                                         partition@007e0000 {
 156                                                 label = "RedBoot config";
 157                                                 reg = <0x007e0000 0x00010000>; /* 64KB */
 158                                         };
 159
 160                                         partition@007f0000 {
 161                                                 label = "FIS directory";
 162                                                 reg = <0x007f0000 0x00010000>; /* 64KB */
 163                                         };
 164                                 };
 165                         };
 166
 167                         i2c@11000 {
 168                                 clock-frequency = <400000>;
 169                                 status = "okay";
 170
 171                                 s35390a: s35390a@30 {
 172                                          compatible = "sii,s35390a";
 173                                          reg = <0x30>;
 174                                 };
 175                         };
 176
 177                         /* Connected to a header on device's PCB. This
 178                          * provides the main console for the device.
 179                          *
 180                          * Warning: the device may not boot with a 3.3V
 181                          * USB-serial converter connected when the power
 182                          * button is pressed. The converter needs to be
 183                          * connected a few seconds after pressing the
 184                          * power button. This is possibly due to UART0_TXD
 185                          * pin being sampled at reset (bit 0 of SAR).
 186                          */
 187                         serial@12000 {
 188                                 status = "okay";
 189                         };
 190
 191                         /* Connected to a Microchip PIC16F883 for power control */
 192                         serial@12100 {
 193                                 status = "okay";
 194                         };
 195
 196                         poweroff@12100 {
 197                                 compatible = "synology,power-off";
 198                                 reg = <0x12100 0x100>;
 199                                 clocks = <&coreclk 0>;
 200                         };
 201
 202                         /* Front USB 2.0 port */
 203                         usb@50000 {
 204                                 status = "okay";
 205                         };
 206
 207                         mdio {
 208                                 phy0: ethernet-phy@0 { /* Marvell 88E1512 */
 209                                         reg = <0>;
 210                                 };
 211
 212                                 phy1: ethernet-phy@1 { /* Marvell 88E1512 */
 213                                         reg = <1>;
 214                                 };
 215                         };
 216
 217                         ethernet@70000 {
 218                                 status = "okay";
 219                                 pinctrl-0 = <&ge0_rgmii_pins>;
 220                                 pinctrl-names = "default";
 221                                 phy = <&phy1>;
 222                                 phy-mode = "rgmii-id";
 223                         };
 224
 225                         ethernet@74000 {
 226                                 pinctrl-0 = <&ge1_rgmii_pins>;
 227                                 pinctrl-names = "default";
 228                                 status = "okay";
 229                                 phy = <&phy0>;
 230                                 phy-mode = "rgmii-id";
 231                         };
 232                 };
 233         };
 234
 235         regulators {
 236                 compatible = "simple-bus";
 237                 #address-cells = <1>;
 238                 #size-cells = <0>;
 239                 pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
 240                              &sata3_pwr_pin &sata4_pwr_pin>;
 241                 pinctrl-names = "default";
 242
 243                 sata1_regulator: sata1-regulator {
 244                         compatible = "regulator-fixed";
 245                         reg = <1>;
 246                         regulator-name = "SATA1 Power";
 247                         regulator-min-microvolt = <5000000>;
 248                         regulator-max-microvolt = <5000000>;
 249                         startup-delay-us = <2000000>;
 250                         enable-active-high;
 251                         regulator-always-on;
 252                         regulator-boot-on;
 253                         gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 254                 };
 255
 256                 sata2_regulator: sata2-regulator {
 257                         compatible = "regulator-fixed";
 258                         reg = <2>;
 259                         regulator-name = "SATA2 Power";
 260                         regulator-min-microvolt = <5000000>;
 261                         regulator-max-microvolt = <5000000>;
 262                         startup-delay-us = <4000000>;
 263                         enable-active-high;
 264                         regulator-always-on;
 265                         regulator-boot-on;
 266                         gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 267                 };
 268
 269                 sata3_regulator: sata3-regulator {
 270                         compatible = "regulator-fixed";
 271                         reg = <3>;
 272                         regulator-name = "SATA3 Power";
 273                         regulator-min-microvolt = <5000000>;
 274                         regulator-max-microvolt = <5000000>;
 275                         startup-delay-us = <6000000>;
 276                         enable-active-high;
 277                         regulator-always-on;
 278                         regulator-boot-on;
 279                         gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 280                 };
 281
 282                 sata4_regulator: sata4-regulator {
 283                         compatible = "regulator-fixed";
 284                         reg = <4>;
 285                         regulator-name = "SATA4 Power";
 286                         regulator-min-microvolt = <5000000>;
 287                         regulator-max-microvolt = <5000000>;
 288                         startup-delay-us = <8000000>;
 289                         enable-active-high;
 290                         regulator-always-on;
 291                         regulator-boot-on;
 292                         gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 293                 };
 294         };
 295 };
 296
 297 &pinctrl {
 298         sata1_pwr_pin: sata1-pwr-pin {
 299                 marvell,pins = "mpp42";
 300                 marvell,function = "gpio";
 301         };
 302
 303         sata2_pwr_pin: sata2-pwr-pin {
 304                 marvell,pins = "mpp44";
 305                 marvell,function = "gpio";
 306         };
 307
 308         sata3_pwr_pin: sata3-pwr-pin {
 309                 marvell,pins = "mpp45";
 310                 marvell,function = "gpio";
 311         };
 312
 313         sata4_pwr_pin: sata4-pwr-pin {
 314                 marvell,pins = "mpp46";
 315                 marvell,function = "gpio";
 316         };
 317
 318         sata1_pres_pin: sata1-pres-pin {
 319                 marvell,pins = "mpp34";
 320                 marvell,function = "gpio";
 321         };
 322
 323         sata2_pres_pin: sata2-pres-pin {
 324                 marvell,pins = "mpp35";
 325                 marvell,function = "gpio";
 326         };
 327
 328         sata3_pres_pin: sata3-pres-pin {
 329                 marvell,pins = "mpp40";
 330                 marvell,function = "gpio";
 331         };
 332
 333         sata4_pres_pin: sata4-pres-pin {
 334                 marvell,pins = "mpp41";
 335                 marvell,function = "gpio";
 336         };
 337
 338         syno_id_bit0_pin: syno-id-bit0-pin {
 339                 marvell,pins = "mpp26";
 340                 marvell,function = "gpio";
 341         };
 342
 343         syno_id_bit1_pin: syno-id-bit1-pin {
 344                 marvell,pins = "mpp28";
 345                 marvell,function = "gpio";
 346         };
 347
 348         syno_id_bit2_pin: syno-id-bit2-pin {
 349                 marvell,pins = "mpp29";
 350                 marvell,function = "gpio";
 351         };
 352
 353         fan1_alarm_pin: fan1-alarm-pin {
 354                 marvell,pins = "mpp33";
 355                 marvell,function = "gpio";
 356         };
 357
 358         fan2_alarm_pin: fan2-alarm-pin {
 359                 marvell,pins = "mpp32";
 360                 marvell,function = "gpio";
 361         };
 362 };