arch/arm/boot/dts/at91-ariag25.dts

   1 /*
   2  * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
   3  *
   4  * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
   5  *                    Robert Nelson <robertcnelson@gmail.com>
   6  *
   7  * Licensed under GPLv2 or later.
   8  */
   9 /dts-v1/;
  10 #include "at91sam9g25.dtsi"
  11
  12 / {
  13         model = "Acme Systems Aria G25";
  14         compatible = "acme,ariag25", "atmel,at91sam9x5ek",
  15                      "atmel,at91sam9x5", "atmel,at91sam9";
  16
  17         aliases {
  18                 serial0 = &dbgu;
  19                 serial1 = &usart0;
  20                 serial2 = &usart1;
  21                 serial3 = &usart2;
  22                 serial4 = &usart3;
  23                 serial5 = &uart0;
  24                 serial6 = &uart1;
  25         };
  26
  27         chosen {
  28                 bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
  29         };
  30
  31         memory {
  32                 /* 128 MB, change this for 256 MB revision */
  33                 reg = <0x20000000 0x8000000>;
  34         };
  35
  36         clocks {
  37                 #address-cells = <1>;
  38                 #size-cells = <1>;
  39                 ranges;
  40
  41                 main_clock: clock@0 {
  42                         compatible = "atmel,osc", "fixed-clock";
  43                         clock-frequency = <12000000>;
  44                 };
  45         };
  46
  47         ahb {
  48                 apb {
  49                         mmc0: mmc@f0008000 {
  50                                 /* N.B. Aria has no SD card detect (CD), assumed present */
  51
  52                                 pinctrl-0 = <
  53                                         &pinctrl_mmc0_slot0_clk_cmd_dat0
  54                                         &pinctrl_mmc0_slot0_dat1_3>;
  55                                 status = "okay";
  56                                 slot@0 {
  57                                         reg = <0>;
  58                                         bus-width = <4>;
  59                                 };
  60                         };
  61
  62                         i2c0: i2c@f8010000 {
  63                                 status = "okay";
  64                         };
  65
  66                         i2c1: i2c@f8014000 {
  67                                 status = "okay";
  68                         };
  69
  70                         /* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
  71
  72                         usart0: serial@f801c000 {
  73                                 pinctrl-0 = <&pinctrl_usart0
  74                                              &pinctrl_usart0_rts
  75                                              &pinctrl_usart0_cts>;
  76                                 status = "okay";
  77                         };
  78
  79                         usart1: serial@f8020000 {
  80                                 pinctrl-0 = <&pinctrl_usart1
  81                                              /* &pinctrl_usart1_rts */
  82                                              /* &pinctrl_usart1_cts */
  83                                             >;
  84                                 status = "okay";
  85                         };
  86
  87                         usart2: serial@f8024000 {
  88                                 /* cannot activate RTS2+CTS2, clash with
  89                                  * ethernet on PB0 and PB1 */
  90                                 pinctrl-0 = <&pinctrl_usart2>;
  91                                 status = "okay";
  92                         };
  93
  94                         usart3: serial@f8028000 {
  95                                 compatible = "atmel,at91sam9260-usart";
  96                                 reg = <0xf8028000 0x200>;
  97                                 interrupts = <8 4 5>;
  98                                 pinctrl-names = "default";
  99                                 pinctrl-0 = <&pinctrl_usart3
 100                                              /* &pinctrl_usart3_rts */
 101                                              /* &pinctrl_usart3_cts */
 102                                             >;
 103                                 status = "okay";
 104                         };
 105
 106                         macb0: ethernet@f802c000 {
 107                                 phy-mode = "rmii";
 108                                 /*
 109                                  * following can be overwritten by bootloader:
 110                                  * for example u-boot 'ftd set' command
 111                                  */
 112                                 local-mac-address = [00 00 00 00 00 00];
 113                                 status = "okay";
 114                         };
 115
 116                         /*
 117                          * UART0/1 pins are marked as GPIO on
 118                          * Aria documentation.
 119                          * Change to "okay" if you need additional serial ports
 120                          */
 121                         uart0: serial@f8040000 {
 122                                 status = "disabled";
 123                         };
 124
 125                         uart1: serial@f8044000 {
 126                                 status = "disabled";
 127                         };
 128
 129                         adc0: adc@f804c000 {
 130                                 status = "okay";
 131                                 atmel,adc-channels-used = <0xf>;
 132                                 atmel,adc-num-channels = <4>;
 133                         };
 134
 135                         dbgu: serial@fffff200 {
 136                                 status = "okay";
 137                         };
 138
 139                         pinctrl@fffff400 {
 140                                 w1_0 {
 141                                         pinctrl_w1_0: w1_0-0 {
 142                                                 atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
 143                                         };
 144                                 };
 145                         };
 146
 147                         rtc@fffffeb0 {
 148                                 status = "okay";
 149                         };
 150                 };
 151
 152                 usb0: ohci@00600000 {
 153                         status = "okay";
 154                         num-ports = <3>;
 155                 };
 156
 157                 usb1: ehci@00700000 {
 158                         status = "okay";
 159                 };
 160         };
 161
 162         leds {
 163                 compatible = "gpio-leds";
 164
 165                 /* little green LED in middle of Aria G25 module */
 166                 aria_led {
 167                         label = "aria_led";
 168                         gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
 169                         linux,default-trigger = "heartbeat";
 170                 };
 171
 172         };
 173
 174         onewire@0 {
 175                 compatible = "w1-gpio";
 176                 gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
 177                 pinctrl-names = "default";
 178                 pinctrl-0 = <&pinctrl_w1_0>;
 179         };
 180 };