arch/arm/boot/dts/at91sam9260.dtsi

   1 /*
   2  * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
   3  *
   4  *  Copyright (C) 2011 Atmel,
   5  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
   6  *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
   7  *
   8  * Licensed under GPLv2 or later.
   9  */
  10
  11 /include/ "skeleton.dtsi"
  12
  13 / {
  14         model = "Atmel AT91SAM9260 family SoC";
  15         compatible = "atmel,at91sam9260";
  16         interrupt-parent = <&aic>;
  17
  18         aliases {
  19                 serial0 = &dbgu;
  20                 serial1 = &usart0;
  21                 serial2 = &usart1;
  22                 serial3 = &usart2;
  23                 serial4 = &usart3;
  24                 serial5 = &usart4;
  25                 serial6 = &usart5;
  26                 gpio0 = &pioA;
  27                 gpio1 = &pioB;
  28                 gpio2 = &pioC;
  29                 tcb0 = &tcb0;
  30                 tcb1 = &tcb1;
  31         };
  32         cpus {
  33                 cpu@0 {
  34                         compatible = "arm,arm926ejs";
  35                 };
  36         };
  37
  38         memory {
  39                 reg = <0x20000000 0x04000000>;
  40         };
  41
  42         ahb {
  43                 compatible = "simple-bus";
  44                 #address-cells = <1>;
  45                 #size-cells = <1>;
  46                 ranges;
  47
  48                 apb {
  49                         compatible = "simple-bus";
  50                         #address-cells = <1>;
  51                         #size-cells = <1>;
  52                         ranges;
  53
  54                         aic: interrupt-controller@fffff000 {
  55                                 #interrupt-cells = <3>;
  56                                 compatible = "atmel,at91rm9200-aic";
  57                                 interrupt-controller;
  58                                 reg = <0xfffff000 0x200>;
  59                                 atmel,external-irqs = <29 30 31>;
  60                         };
  61
  62                         ramc0: ramc@ffffea00 {
  63                                 compatible = "atmel,at91sam9260-sdramc";
  64                                 reg = <0xffffea00 0x200>;
  65                         };
  66
  67                         pmc: pmc@fffffc00 {
  68                                 compatible = "atmel,at91rm9200-pmc";
  69                                 reg = <0xfffffc00 0x100>;
  70                         };
  71
  72                         rstc@fffffd00 {
  73                                 compatible = "atmel,at91sam9260-rstc";
  74                                 reg = <0xfffffd00 0x10>;
  75                         };
  76
  77                         shdwc@fffffd10 {
  78                                 compatible = "atmel,at91sam9260-shdwc";
  79                                 reg = <0xfffffd10 0x10>;
  80                         };
  81
  82                         pit: timer@fffffd30 {
  83                                 compatible = "atmel,at91sam9260-pit";
  84                                 reg = <0xfffffd30 0xf>;
  85                                 interrupts = <1 4 7>;
  86                         };
  87
  88                         tcb0: timer@fffa0000 {
  89                                 compatible = "atmel,at91rm9200-tcb";
  90                                 reg = <0xfffa0000 0x100>;
  91                                 interrupts = <17 4 0 18 4 0 19 4 0>;
  92                         };
  93
  94                         tcb1: timer@fffdc000 {
  95                                 compatible = "atmel,at91rm9200-tcb";
  96                                 reg = <0xfffdc000 0x100>;
  97                                 interrupts = <26 4 0 27 4 0 28 4 0>;
  98                         };
  99
 100                         pioA: gpio@fffff400 {
 101                                 compatible = "atmel,at91rm9200-gpio";
 102                                 reg = <0xfffff400 0x100>;
 103                                 interrupts = <2 4 1>;
 104                                 #gpio-cells = <2>;
 105                                 gpio-controller;
 106                                 interrupt-controller;
 107                                 #interrupt-cells = <2>;
 108                         };
 109
 110                         pioB: gpio@fffff600 {
 111                                 compatible = "atmel,at91rm9200-gpio";
 112                                 reg = <0xfffff600 0x100>;
 113                                 interrupts = <3 4 1>;
 114                                 #gpio-cells = <2>;
 115                                 gpio-controller;
 116                                 interrupt-controller;
 117                                 #interrupt-cells = <2>;
 118                         };
 119
 120                         pioC: gpio@fffff800 {
 121                                 compatible = "atmel,at91rm9200-gpio";
 122                                 reg = <0xfffff800 0x100>;
 123                                 interrupts = <4 4 1>;
 124                                 #gpio-cells = <2>;
 125                                 gpio-controller;
 126                                 interrupt-controller;
 127                                 #interrupt-cells = <2>;
 128                         };
 129
 130                         dbgu: serial@fffff200 {
 131                                 compatible = "atmel,at91sam9260-usart";
 132                                 reg = <0xfffff200 0x200>;
 133                                 interrupts = <1 4 7>;
 134                                 status = "disabled";
 135                         };
 136
 137                         usart0: serial@fffb0000 {
 138                                 compatible = "atmel,at91sam9260-usart";
 139                                 reg = <0xfffb0000 0x200>;
 140                                 interrupts = <6 4 5>;
 141                                 atmel,use-dma-rx;
 142                                 atmel,use-dma-tx;
 143                                 status = "disabled";
 144                         };
 145
 146                         usart1: serial@fffb4000 {
 147                                 compatible = "atmel,at91sam9260-usart";
 148                                 reg = <0xfffb4000 0x200>;
 149                                 interrupts = <7 4 5>;
 150                                 atmel,use-dma-rx;
 151                                 atmel,use-dma-tx;
 152                                 status = "disabled";
 153                         };
 154
 155                         usart2: serial@fffb8000 {
 156                                 compatible = "atmel,at91sam9260-usart";
 157                                 reg = <0xfffb8000 0x200>;
 158                                 interrupts = <8 4 5>;
 159                                 atmel,use-dma-rx;
 160                                 atmel,use-dma-tx;
 161                                 status = "disabled";
 162                         };
 163
 164                         usart3: serial@fffd0000 {
 165                                 compatible = "atmel,at91sam9260-usart";
 166                                 reg = <0xfffd0000 0x200>;
 167                                 interrupts = <23 4 5>;
 168                                 atmel,use-dma-rx;
 169                                 atmel,use-dma-tx;
 170                                 status = "disabled";
 171                         };
 172
 173                         usart4: serial@fffd4000 {
 174                                 compatible = "atmel,at91sam9260-usart";
 175                                 reg = <0xfffd4000 0x200>;
 176                                 interrupts = <24 4 5>;
 177                                 atmel,use-dma-rx;
 178                                 atmel,use-dma-tx;
 179                                 status = "disabled";
 180                         };
 181
 182                         usart5: serial@fffd8000 {
 183                                 compatible = "atmel,at91sam9260-usart";
 184                                 reg = <0xfffd8000 0x200>;
 185                                 interrupts = <25 4 5>;
 186                                 atmel,use-dma-rx;
 187                                 atmel,use-dma-tx;
 188                                 status = "disabled";
 189                         };
 190
 191                         macb0: ethernet@fffc4000 {
 192                                 compatible = "cdns,at32ap7000-macb", "cdns,macb";
 193                                 reg = <0xfffc4000 0x100>;
 194                                 interrupts = <21 4 3>;
 195                                 status = "disabled";
 196                         };
 197
 198                         usb1: gadget@fffa4000 {
 199                                 compatible = "atmel,at91rm9200-udc";
 200                                 reg = <0xfffa4000 0x4000>;
 201                                 interrupts = <10 4 2>;
 202                                 status = "disabled";
 203                         };
 204
 205                         adc0: adc@fffe0000 {
 206                                 compatible = "atmel,at91sam9260-adc";
 207                                 reg = <0xfffe0000 0x100>;
 208                                 interrupts = <5 4 0>;
 209                                 atmel,adc-use-external-triggers;
 210                                 atmel,adc-channels-used = <0xf>;
 211                                 atmel,adc-vref = <3300>;
 212                                 atmel,adc-num-channels = <4>;
 213                                 atmel,adc-startup-time = <15>;
 214                                 atmel,adc-channel-base = <0x30>;
 215                                 atmel,adc-drdy-mask = <0x10000>;
 216                                 atmel,adc-status-register = <0x1c>;
 217                                 atmel,adc-trigger-register = <0x04>;
 218
 219                                 trigger@0 {
 220                                         trigger-name = "timer-counter-0";
 221                                         trigger-value = <0x1>;
 222                                 };
 223                                 trigger@1 {
 224                                         trigger-name = "timer-counter-1";
 225                                         trigger-value = <0x3>;
 226                                 };
 227
 228                                 trigger@2 {
 229                                         trigger-name = "timer-counter-2";
 230                                         trigger-value = <0x5>;
 231                                 };
 232
 233                                 trigger@3 {
 234                                         trigger-name = "external";
 235                                         trigger-value = <0x13>;
 236                                         trigger-external;
 237                                 };
 238                         };
 239                 };
 240
 241                 nand0: nand@40000000 {
 242                         compatible = "atmel,at91rm9200-nand";
 243                         #address-cells = <1>;
 244                         #size-cells = <1>;
 245                         reg = <0x40000000 0x10000000
 246                                0xffffe800 0x200
 247                               >;
 248                         atmel,nand-addr-offset = <21>;
 249                         atmel,nand-cmd-offset = <22>;
 250                         gpios = <&pioC 13 0
 251                                  &pioC 14 0
 252                                  0
 253                                 >;
 254                         status = "disabled";
 255                 };
 256
 257                 usb0: ohci@00500000 {
 258                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 259                         reg = <0x00500000 0x100000>;
 260                         interrupts = <20 4 2>;
 261                         status = "disabled";
 262                 };
 263         };
 264
 265         i2c@0 {
 266                 compatible = "i2c-gpio";
 267                 gpios = <&pioA 23 0 /* sda */
 268                          &pioA 24 0 /* scl */
 269                         >;
 270                 i2c-gpio,sda-open-drain;
 271                 i2c-gpio,scl-open-drain;
 272                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
 273                 #address-cells = <1>;
 274                 #size-cells = <0>;
 275                 status = "disabled";
 276         };
 277 };