projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
MAINTAINERS: Add phy-miphy28lp.c and phy-miphy365x.c to ARCH/STI architecture
[deliverable/linux.git] / arch / arm / boot / dts / at91sam9260.dtsi
1 /*
2 * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
3 *
4 * Copyright (C) 2011 Atmel,
5 * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
6 * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7 *
8 * Licensed under GPLv2 or later.
9 */
10
11 #include "skeleton.dtsi"
12 #include <dt-bindings/pinctrl/at91.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/clock/at91.h>
16
17 / {
18 model = "Atmel AT91SAM9260 family SoC";
19 compatible = "atmel,at91sam9260";
20 interrupt-parent = <&aic>;
21
22 aliases {
23 serial0 = &dbgu;
24 serial1 = &usart0;
25 serial2 = &usart1;
26 serial3 = &usart2;
27 serial4 = &usart3;
28 serial5 = &uart0;
29 serial6 = &uart1;
30 gpio0 = &pioA;
31 gpio1 = &pioB;
32 gpio2 = &pioC;
33 tcb0 = &tcb0;
34 tcb1 = &tcb1;
35 i2c0 = &i2c0;
36 ssc0 = &ssc0;
37 };
38 cpus {
39 #address-cells = <0>;
40 #size-cells = <0>;
41
42 cpu {
43 compatible = "arm,arm926ej-s";
44 device_type = "cpu";
45 };
46 };
47
48 memory {
49 reg = <0x20000000 0x04000000>;
50 };
51
52 clocks {
53 slow_xtal: slow_xtal {
54 compatible = "fixed-clock";
55 #clock-cells = <0>;
56 clock-frequency = <0>;
57 };
58
59 main_xtal: main_xtal {
60 compatible = "fixed-clock";
61 #clock-cells = <0>;
62 clock-frequency = <0>;
63 };
64
65 adc_op_clk: adc_op_clk{
66 compatible = "fixed-clock";
67 #clock-cells = <0>;
68 clock-frequency = <5000000>;
69 };
70 };
71
72 sram0: sram@002ff000 {
73 compatible = "mmio-sram";
74 reg = <0x002ff000 0x2000>;
75 };
76
77 ahb {
78 compatible = "simple-bus";
79 #address-cells = <1>;
80 #size-cells = <1>;
81 ranges;
82
83 apb {
84 compatible = "simple-bus";
85 #address-cells = <1>;
86 #size-cells = <1>;
87 ranges;
88
89 aic: interrupt-controller@fffff000 {
90 #interrupt-cells = <3>;
91 compatible = "atmel,at91rm9200-aic";
92 interrupt-controller;
93 reg = <0xfffff000 0x200>;
94 atmel,external-irqs = <29 30 31>;
95 };
96
97 ramc0: ramc@ffffea00 {
98 compatible = "atmel,at91sam9260-sdramc";
99 reg = <0xffffea00 0x200>;
100 };
101
102 pmc: pmc@fffffc00 {
103 compatible = "atmel,at91sam9260-pmc";
104 reg = <0xfffffc00 0x100>;
105 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
106 interrupt-controller;
107 #address-cells = <1>;
108 #size-cells = <0>;
109 #interrupt-cells = <1>;
110
111 main_osc: main_osc {
112 compatible = "atmel,at91rm9200-clk-main-osc";
113 #clock-cells = <0>;
114 interrupts-extended = <&pmc AT91_PMC_MOSCS>;
115 clocks = <&main_xtal>;
116 };
117
118 main: mainck {
119 compatible = "atmel,at91rm9200-clk-main";
120 #clock-cells = <0>;
121 clocks = <&main_osc>;
122 };
123
124 slow_rc_osc: slow_rc_osc {
125 compatible = "fixed-clock";
126 #clock-cells = <0>;
127 clock-frequency = <32768>;
128 clock-accuracy = <50000000>;
129 };
130
131 clk32k: slck {
132 compatible = "atmel,at91sam9260-clk-slow";
133 #clock-cells = <0>;
134 clocks = <&slow_rc_osc>, <&slow_xtal>;
135 };
136
137 plla: pllack {
138 compatible = "atmel,at91rm9200-clk-pll";
139 #clock-cells = <0>;
140 interrupts-extended = <&pmc AT91_PMC_LOCKA>;
141 clocks = <&main>;
142 reg = <0>;
143 atmel,clk-input-range = <1000000 32000000>;
144 #atmel,pll-clk-output-range-cells = <4>;
145 atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
146 <150000000 240000000 2 1>;
147 };
148
149 pllb: pllbck {
150 compatible = "atmel,at91rm9200-clk-pll";
151 #clock-cells = <0>;
152 interrupts-extended = <&pmc AT91_PMC_LOCKB>;
153 clocks = <&main>;
154 reg = <1>;
155 atmel,clk-input-range = <1000000 5000000>;
156 #atmel,pll-clk-output-range-cells = <4>;
157 atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
158 };
159
160 mck: masterck {
161 compatible = "atmel,at91rm9200-clk-master";
162 #clock-cells = <0>;
163 interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
164 clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
165 atmel,clk-output-range = <0 105000000>;
166 atmel,clk-divisors = <1 2 4 0>;
167 };
168
169 usb: usbck {
170 compatible = "atmel,at91rm9200-clk-usb";
171 #clock-cells = <0>;
172 atmel,clk-divisors = <1 2 4 0>;
173 clocks = <&pllb>;
174 };
175
176 prog: progck {
177 compatible = "atmel,at91rm9200-clk-programmable";
178 #address-cells = <1>;
179 #size-cells = <0>;
180 interrupt-parent = <&pmc>;
181 clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
182
183 prog0: prog0 {
184 #clock-cells = <0>;
185 reg = <0>;
186 interrupts = <AT91_PMC_PCKRDY(0)>;
187 };
188
189 prog1: prog1 {
190 #clock-cells = <0>;
191 reg = <1>;
192 interrupts = <AT91_PMC_PCKRDY(1)>;
193 };
194 };
195
196 systemck {
197 compatible = "atmel,at91rm9200-clk-system";
198 #address-cells = <1>;
199 #size-cells = <0>;
200
201 uhpck: uhpck {
202 #clock-cells = <0>;
203 reg = <6>;
204 clocks = <&usb>;
205 };
206
207 udpck: udpck {
208 #clock-cells = <0>;
209 reg = <7>;
210 clocks = <&usb>;
211 };
212
213 pck0: pck0 {
214 #clock-cells = <0>;
215 reg = <8>;
216 clocks = <&prog0>;
217 };
218
219 pck1: pck1 {
220 #clock-cells = <0>;
221 reg = <9>;
222 clocks = <&prog1>;
223 };
224 };
225
226 periphck {
227 compatible = "atmel,at91rm9200-clk-peripheral";
228 #address-cells = <1>;
229 #size-cells = <0>;
230 clocks = <&mck>;
231
232 pioA_clk: pioA_clk {
233 #clock-cells = <0>;
234 reg = <2>;
235 };
236
237 pioB_clk: pioB_clk {
238 #clock-cells = <0>;
239 reg = <3>;
240 };
241
242 pioC_clk: pioC_clk {
243 #clock-cells = <0>;
244 reg = <4>;
245 };
246
247 adc_clk: adc_clk {
248 #clock-cells = <0>;
249 reg = <5>;
250 };
251
252 usart0_clk: usart0_clk {
253 #clock-cells = <0>;
254 reg = <6>;
255 };
256
257 usart1_clk: usart1_clk {
258 #clock-cells = <0>;
259 reg = <7>;
260 };
261
262 usart2_clk: usart2_clk {
263 #clock-cells = <0>;
264 reg = <8>;
265 };
266
267 mci0_clk: mci0_clk {
268 #clock-cells = <0>;
269 reg = <9>;
270 };
271
272 udc_clk: udc_clk {
273 #clock-cells = <0>;
274 reg = <10>;
275 };
276
277 twi0_clk: twi0_clk {
278 reg = <11>;
279 #clock-cells = <0>;
280 };
281
282 spi0_clk: spi0_clk {
283 #clock-cells = <0>;
284 reg = <12>;
285 };
286
287 spi1_clk: spi1_clk {
288 #clock-cells = <0>;
289 reg = <13>;
290 };
291
292 ssc0_clk: ssc0_clk {
293 #clock-cells = <0>;
294 reg = <14>;
295 };
296
297 tc0_clk: tc0_clk {
298 #clock-cells = <0>;
299 reg = <17>;
300 };
301
302 tc1_clk: tc1_clk {
303 #clock-cells = <0>;
304 reg = <18>;
305 };
306
307 tc2_clk: tc2_clk {
308 #clock-cells = <0>;
309 reg = <19>;
310 };
311
312 ohci_clk: ohci_clk {
313 #clock-cells = <0>;
314 reg = <20>;
315 };
316
317 macb0_clk: macb0_clk {
318 #clock-cells = <0>;
319 reg = <21>;
320 };
321
322 isi_clk: isi_clk {
323 #clock-cells = <0>;
324 reg = <22>;
325 };
326
327 usart3_clk: usart3_clk {
328 #clock-cells = <0>;
329 reg = <23>;
330 };
331
332 uart0_clk: uart0_clk {
333 #clock-cells = <0>;
334 reg = <24>;
335 };
336
337 uart1_clk: uart1_clk {
338 #clock-cells = <0>;
339 reg = <25>;
340 };
341
342 tc3_clk: tc3_clk {
343 #clock-cells = <0>;
344 reg = <26>;
345 };
346
347 tc4_clk: tc4_clk {
348 #clock-cells = <0>;
349 reg = <27>;
350 };
351
352 tc5_clk: tc5_clk {
353 #clock-cells = <0>;
354 reg = <28>;
355 };
356 };
357 };
358
359 rstc@fffffd00 {
360 compatible = "atmel,at91sam9260-rstc";
361 reg = <0xfffffd00 0x10>;
362 };
363
364 shdwc@fffffd10 {
365 compatible = "atmel,at91sam9260-shdwc";
366 reg = <0xfffffd10 0x10>;
367 };
368
369 pit: timer@fffffd30 {
370 compatible = "atmel,at91sam9260-pit";
371 reg = <0xfffffd30 0xf>;
372 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
373 clocks = <&mck>;
374 };
375
376 tcb0: timer@fffa0000 {
377 compatible = "atmel,at91rm9200-tcb";
378 reg = <0xfffa0000 0x100>;
379 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
380 18 IRQ_TYPE_LEVEL_HIGH 0
381 19 IRQ_TYPE_LEVEL_HIGH 0>;
382 clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
383 clock-names = "t0_clk", "t1_clk", "t2_clk";
384 };
385
386 tcb1: timer@fffdc000 {
387 compatible = "atmel,at91rm9200-tcb";
388 reg = <0xfffdc000 0x100>;
389 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
390 27 IRQ_TYPE_LEVEL_HIGH 0
391 28 IRQ_TYPE_LEVEL_HIGH 0>;
392 clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
393 clock-names = "t0_clk", "t1_clk", "t2_clk";
394 };
395
396 pinctrl@fffff400 {
397 #address-cells = <1>;
398 #size-cells = <1>;
399 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
400 ranges = <0xfffff400 0xfffff400 0x600>;
401
402 atmel,mux-mask = <
403 /* A B */
404 0xffffffff 0xffc00c3b /* pioA */
405 0xffffffff 0x7fff3ccf /* pioB */
406 0xffffffff 0x007fffff /* pioC */
407 >;
408
409 /* shared pinctrl settings */
410 dbgu {
411 pinctrl_dbgu: dbgu-0 {
412 atmel,pins =
413 <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
414 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB15 periph with pullup */
415 };
416 };
417
418 usart0 {
419 pinctrl_usart0: usart0-0 {
420 atmel,pins =
421 <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
422 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */
423 };
424
425 pinctrl_usart0_rts: usart0_rts-0 {
426 atmel,pins =
427 <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */
428 };
429
430 pinctrl_usart0_cts: usart0_cts-0 {
431 atmel,pins =
432 <AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A */
433 };
434
435 pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
436 atmel,pins =
437 <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A */
438 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB22 periph A */
439 };
440
441 pinctrl_usart0_dcd: usart0_dcd-0 {
442 atmel,pins =
443 <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */
444 };
445
446 pinctrl_usart0_ri: usart0_ri-0 {
447 atmel,pins =
448 <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */
449 };
450 };
451
452 usart1 {
453 pinctrl_usart1: usart1-0 {
454 atmel,pins =
455 <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */
456 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */
457 };
458
459 pinctrl_usart1_rts: usart1_rts-0 {
460 atmel,pins =
461 <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB28 periph A */
462 };
463
464 pinctrl_usart1_cts: usart1_cts-0 {
465 atmel,pins =
466 <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB29 periph A */
467 };
468 };
469
470 usart2 {
471 pinctrl_usart2: usart2-0 {
472 atmel,pins =
473 <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB8 periph A with pullup */
474 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB9 periph A */
475 };
476
477 pinctrl_usart2_rts: usart2_rts-0 {
478 atmel,pins =
479 <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */
480 };
481
482 pinctrl_usart2_cts: usart2_cts-0 {
483 atmel,pins =
484 <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */
485 };
486 };
487
488 usart3 {
489 pinctrl_usart3: usart3-0 {
490 atmel,pins =
491 <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB10 periph A with pullup */
492 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */
493 };
494
495 pinctrl_usart3_rts: usart3_rts-0 {
496 atmel,pins =
497 <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */
498 };
499
500 pinctrl_usart3_cts: usart3_cts-0 {
501 atmel,pins =
502 <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */
503 };
504 };
505
506 uart0 {
507 pinctrl_uart0: uart0-0 {
508 atmel,pins =
509 <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA31 periph B with pullup */
510 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */
511 };
512 };
513
514 uart1 {
515 pinctrl_uart1: uart1-0 {
516 atmel,pins =
517 <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB12 periph A with pullup */
518 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */
519 };
520 };
521
522 nand {
523 pinctrl_nand: nand-0 {
524 atmel,pins =
525 <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC13 gpio RDY pin pull_up */
526 AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */
527 };
528 };
529
530 macb {
531 pinctrl_macb_rmii: macb_rmii-0 {
532 atmel,pins =
533 <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */
534 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */
535 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */
536 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */
537 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */
538 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */
539 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */
540 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA19 periph A */
541 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA20 periph A */
542 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */
543 };
544
545 pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
546 atmel,pins =
547 <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */
548 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA23 periph B */
549 AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */
550 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */
551 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */
552 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */
553 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */
554 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
555 };
556
557 pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
558 atmel,pins =
559 <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA10 periph B */
560 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA11 periph B */
561 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */
562 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */
563 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */
564 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */
565 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */
566 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
567 };
568 };
569
570 mmc0 {
571 pinctrl_mmc0_clk: mmc0_clk-0 {
572 atmel,pins =
573 <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */
574 };
575
576 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
577 atmel,pins =
578 <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
579 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA6 periph A with pullup */
580 };
581
582 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
583 atmel,pins =
584 <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */
585 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */
586 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */
587 };
588
589 pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
590 atmel,pins =
591 <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA1 periph B with pullup */
592 AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA0 periph B with pullup */
593 };
594
595 pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
596 atmel,pins =
597 <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */
598 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA4 periph B with pullup */
599 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA3 periph B with pullup */
600 };
601 };
602
603 ssc0 {
604 pinctrl_ssc0_tx: ssc0_tx-0 {
605 atmel,pins =
606 <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
607 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A */
608 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */
609 };
610
611 pinctrl_ssc0_rx: ssc0_rx-0 {
612 atmel,pins =
613 <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */
614 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB20 periph A */
615 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */
616 };
617 };
618
619 spi0 {
620 pinctrl_spi0: spi0-0 {
621 atmel,pins =
622 <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */
623 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */
624 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */
625 };
626 };
627
628 spi1 {
629 pinctrl_spi1: spi1-0 {
630 atmel,pins =
631 <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI1_MISO pin */
632 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI1_MOSI pin */
633 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI1_SPCK pin */
634 };
635 };
636
637 i2c_gpio0 {
638 pinctrl_i2c_gpio0: i2c_gpio0-0 {
639 atmel,pins =
640 <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
641 AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
642 };
643 };
644
645 tcb0 {
646 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
647 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
648 };
649
650 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
651 atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
652 };
653
654 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
655 atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
656 };
657
658 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
659 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
660 };
661
662 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
663 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
664 };
665
666 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
667 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
668 };
669
670 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
671 atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
672 };
673
674 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
675 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
676 };
677
678 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
679 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
680 };
681 };
682
683 tcb1 {
684 pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
685 atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
686 };
687
688 pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
689 atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
690 };
691
692 pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
693 atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
694 };
695
696 pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
697 atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
698 };
699
700 pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
701 atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
702 };
703
704 pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
705 atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
706 };
707
708 pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
709 atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
710 };
711
712 pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
713 atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
714 };
715
716 pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
717 atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
718 };
719 };
720
721 pioA: gpio@fffff400 {
722 compatible = "atmel,at91rm9200-gpio";
723 reg = <0xfffff400 0x200>;
724 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
725 #gpio-cells = <2>;
726 gpio-controller;
727 interrupt-controller;
728 #interrupt-cells = <2>;
729 clocks = <&pioA_clk>;
730 };
731
732 pioB: gpio@fffff600 {
733 compatible = "atmel,at91rm9200-gpio";
734 reg = <0xfffff600 0x200>;
735 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
736 #gpio-cells = <2>;
737 gpio-controller;
738 interrupt-controller;
739 #interrupt-cells = <2>;
740 clocks = <&pioB_clk>;
741 };
742
743 pioC: gpio@fffff800 {
744 compatible = "atmel,at91rm9200-gpio";
745 reg = <0xfffff800 0x200>;
746 interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
747 #gpio-cells = <2>;
748 gpio-controller;
749 interrupt-controller;
750 #interrupt-cells = <2>;
751 clocks = <&pioC_clk>;
752 };
753 };
754
755 dbgu: serial@fffff200 {
756 compatible = "atmel,at91sam9260-usart";
757 reg = <0xfffff200 0x200>;
758 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
759 pinctrl-names = "default";
760 pinctrl-0 = <&pinctrl_dbgu>;
761 clocks = <&mck>;
762 clock-names = "usart";
763 status = "disabled";
764 };
765
766 usart0: serial@fffb0000 {
767 compatible = "atmel,at91sam9260-usart";
768 reg = <0xfffb0000 0x200>;
769 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
770 atmel,use-dma-rx;
771 atmel,use-dma-tx;
772 pinctrl-names = "default";
773 pinctrl-0 = <&pinctrl_usart0>;
774 clocks = <&usart0_clk>;
775 clock-names = "usart";
776 status = "disabled";
777 };
778
779 usart1: serial@fffb4000 {
780 compatible = "atmel,at91sam9260-usart";
781 reg = <0xfffb4000 0x200>;
782 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
783 atmel,use-dma-rx;
784 atmel,use-dma-tx;
785 pinctrl-names = "default";
786 pinctrl-0 = <&pinctrl_usart1>;
787 clocks = <&usart1_clk>;
788 clock-names = "usart";
789 status = "disabled";
790 };
791
792 usart2: serial@fffb8000 {
793 compatible = "atmel,at91sam9260-usart";
794 reg = <0xfffb8000 0x200>;
795 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
796 atmel,use-dma-rx;
797 atmel,use-dma-tx;
798 pinctrl-names = "default";
799 pinctrl-0 = <&pinctrl_usart2>;
800 clocks = <&usart2_clk>;
801 clock-names = "usart";
802 status = "disabled";
803 };
804
805 usart3: serial@fffd0000 {
806 compatible = "atmel,at91sam9260-usart";
807 reg = <0xfffd0000 0x200>;
808 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
809 atmel,use-dma-rx;
810 atmel,use-dma-tx;
811 pinctrl-names = "default";
812 pinctrl-0 = <&pinctrl_usart3>;
813 clocks = <&usart3_clk>;
814 clock-names = "usart";
815 status = "disabled";
816 };
817
818 uart0: serial@fffd4000 {
819 compatible = "atmel,at91sam9260-usart";
820 reg = <0xfffd4000 0x200>;
821 interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
822 atmel,use-dma-rx;
823 atmel,use-dma-tx;
824 pinctrl-names = "default";
825 pinctrl-0 = <&pinctrl_uart0>;
826 clocks = <&uart0_clk>;
827 clock-names = "usart";
828 status = "disabled";
829 };
830
831 uart1: serial@fffd8000 {
832 compatible = "atmel,at91sam9260-usart";
833 reg = <0xfffd8000 0x200>;
834 interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
835 atmel,use-dma-rx;
836 atmel,use-dma-tx;
837 pinctrl-names = "default";
838 pinctrl-0 = <&pinctrl_uart1>;
839 clocks = <&uart1_clk>;
840 clock-names = "usart";
841 status = "disabled";
842 };
843
844 macb0: ethernet@fffc4000 {
845 compatible = "cdns,at32ap7000-macb", "cdns,macb";
846 reg = <0xfffc4000 0x100>;
847 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
848 pinctrl-names = "default";
849 pinctrl-0 = <&pinctrl_macb_rmii>;
850 clocks = <&macb0_clk>, <&macb0_clk>;
851 clock-names = "hclk", "pclk";
852 status = "disabled";
853 };
854
855 usb1: gadget@fffa4000 {
856 compatible = "atmel,at91rm9200-udc";
857 reg = <0xfffa4000 0x4000>;
858 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
859 clocks = <&udc_clk>, <&udpck>;
860 clock-names = "pclk", "hclk";
861 status = "disabled";
862 };
863
864 i2c0: i2c@fffac000 {
865 compatible = "atmel,at91sam9260-i2c";
866 reg = <0xfffac000 0x100>;
867 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
868 #address-cells = <1>;
869 #size-cells = <0>;
870 clocks = <&twi0_clk>;
871 status = "disabled";
872 };
873
874 mmc0: mmc@fffa8000 {
875 compatible = "atmel,hsmci";
876 reg = <0xfffa8000 0x600>;
877 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
878 #address-cells = <1>;
879 #size-cells = <0>;
880 pinctrl-names = "default";
881 clocks = <&mci0_clk>;
882 clock-names = "mci_clk";
883 status = "disabled";
884 };
885
886 ssc0: ssc@fffbc000 {
887 compatible = "atmel,at91rm9200-ssc";
888 reg = <0xfffbc000 0x4000>;
889 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
890 pinctrl-names = "default";
891 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
892 clocks = <&ssc0_clk>;
893 clock-names = "pclk";
894 status = "disabled";
895 };
896
897 spi0: spi@fffc8000 {
898 #address-cells = <1>;
899 #size-cells = <0>;
900 compatible = "atmel,at91rm9200-spi";
901 reg = <0xfffc8000 0x200>;
902 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
903 pinctrl-names = "default";
904 pinctrl-0 = <&pinctrl_spi0>;
905 clocks = <&spi0_clk>;
906 clock-names = "spi_clk";
907 status = "disabled";
908 };
909
910 spi1: spi@fffcc000 {
911 #address-cells = <1>;
912 #size-cells = <0>;
913 compatible = "atmel,at91rm9200-spi";
914 reg = <0xfffcc000 0x200>;
915 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
916 pinctrl-names = "default";
917 pinctrl-0 = <&pinctrl_spi1>;
918 clocks = <&spi1_clk>;
919 clock-names = "spi_clk";
920 status = "disabled";
921 };
922
923 adc0: adc@fffe0000 {
924 #address-cells = <1>;
925 #size-cells = <0>;
926 compatible = "atmel,at91sam9260-adc";
927 reg = <0xfffe0000 0x100>;
928 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
929 clocks = <&adc_clk>, <&adc_op_clk>;
930 clock-names = "adc_clk", "adc_op_clk";
931 atmel,adc-use-external-triggers;
932 atmel,adc-channels-used = <0xf>;
933 atmel,adc-vref = <3300>;
934 atmel,adc-startup-time = <15>;
935 atmel,adc-res = <8 10>;
936 atmel,adc-res-names = "lowres", "highres";
937 atmel,adc-use-res = "highres";
938
939 trigger@0 {
940 reg = <0>;
941 trigger-name = "timer-counter-0";
942 trigger-value = <0x1>;
943 };
944 trigger@1 {
945 reg = <1>;
946 trigger-name = "timer-counter-1";
947 trigger-value = <0x3>;
948 };
949
950 trigger@2 {
951 reg = <2>;
952 trigger-name = "timer-counter-2";
953 trigger-value = <0x5>;
954 };
955
956 trigger@3 {
957 reg = <3>;
958 trigger-name = "external";
959 trigger-value = <0xd>;
960 trigger-external;
961 };
962 };
963
964 rtc@fffffd20 {
965 compatible = "atmel,at91sam9260-rtt";
966 reg = <0xfffffd20 0x10>;
967 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
968 clocks = <&clk32k>;
969 status = "disabled";
970 };
971
972 watchdog@fffffd40 {
973 compatible = "atmel,at91sam9260-wdt";
974 reg = <0xfffffd40 0x10>;
975 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
976 atmel,watchdog-type = "hardware";
977 atmel,reset-type = "all";
978 atmel,dbg-halt;
979 atmel,idle-halt;
980 status = "disabled";
981 };
982
983 gpbr: syscon@fffffd50 {
984 compatible = "atmel,at91sam9260-gpbr", "syscon";
985 reg = <0xfffffd50 0x10>;
986 status = "disabled";
987 };
988 };
989
990 nand0: nand@40000000 {
991 compatible = "atmel,at91rm9200-nand";
992 #address-cells = <1>;
993 #size-cells = <1>;
994 reg = <0x40000000 0x10000000
995 0xffffe800 0x200
996 >;
997 atmel,nand-addr-offset = <21>;
998 atmel,nand-cmd-offset = <22>;
999 pinctrl-names = "default";
1000 pinctrl-0 = <&pinctrl_nand>;
1001 gpios = <&pioC 13 GPIO_ACTIVE_HIGH
1002 &pioC 14 GPIO_ACTIVE_HIGH
1003 0
1004 >;
1005 status = "disabled";
1006 };
1007
1008 usb0: ohci@00500000 {
1009 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1010 reg = <0x00500000 0x100000>;
1011 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
1012 clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
1013 clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
1014 status = "disabled";
1015 };
1016 };
1017
1018 i2c@0 {
1019 compatible = "i2c-gpio";
1020 gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
1021 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
1022 >;
1023 i2c-gpio,sda-open-drain;
1024 i2c-gpio,scl-open-drain;
1025 i2c-gpio,delay-us = <2>; /* ~100 kHz */
1026 #address-cells = <1>;
1027 #size-cells = <0>;
1028 pinctrl-names = "default";
1029 pinctrl-0 = <&pinctrl_i2c_gpio0>;
1030 status = "disabled";
1031 };
1032 };
Linux kernel - Deliverables
This page took 0.0532049999999999 seconds and 5 git commands to generate.