arch/arm/boot/dts/bcm958625k.dts

   1 /*
   2  *  BSD LICENSE
   3  *
   4  *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
   5  *
   6  *  Redistribution and use in source and binary forms, with or without
   7  *  modification, are permitted provided that the following conditions
   8  *  are met:
   9  *
  10  *    * Redistributions of source code must retain the above copyright
  11  *      notice, this list of conditions and the following disclaimer.
  12  *    * Redistributions in binary form must reproduce the above copyright
  13  *      notice, this list of conditions and the following disclaimer in
  14  *      the documentation and/or other materials provided with the
  15  *      distribution.
  16  *    * Neither the name of Broadcom Corporation nor the names of its
  17  *      contributors may be used to endorse or promote products derived
  18  *      from this software without specific prior written permission.
  19  *
  20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  24  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  30  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31  */
  32
  33 /dts-v1/;
  34
  35 #include "bcm-nsp.dtsi"
  36
  37 / {
  38         model = "NorthStar Plus SVK (BCM958625K)";
  39         compatible = "brcm,bcm58625", "brcm,nsp";
  40
  41         aliases {
  42                 serial0 = &uart0;
  43                 serial1 = &uart1;
  44         };
  45
  46         chosen {
  47                 stdout-path = "serial0:115200n8";
  48         };
  49 };
  50
  51 &uart0 {
  52         status = "okay";
  53 };
  54
  55 &uart1 {
  56         status = "okay";
  57 };
  58
  59 &pcie0 {
  60         status = "okay";
  61 };
  62
  63 &pcie1 {
  64         status = "okay";
  65 };
  66
  67 &pcie2 {
  68         status = "okay";
  69 };
  70
  71 &sata_phy0 {
  72         status = "okay";
  73 };
  74
  75 &sata_phy1 {
  76         status = "okay";
  77 };
  78
  79 &sata {
  80         status = "okay";
  81 };
  82
  83 &nand {
  84         nandcs@0 {
  85                 compatible = "brcm,nandcs";
  86                 reg = <0>;
  87                 nand-on-flash-bbt;
  88
  89                 #address-cells = <1>;
  90                 #size-cells = <1>;
  91
  92                 nand-ecc-strength = <24>;
  93                 nand-ecc-step-size = <1024>;
  94
  95                 brcm,nand-oob-sector-size = <27>;
  96
  97                 partition@0 {
  98                         label = "nboot";
  99                         reg = <0x00000000 0x00200000>;
 100                         read-only;
 101                 };
 102                 partition@1 {
 103                         label = "nenv";
 104                         reg = <0x00200000 0x00400000>;
 105                 };
 106                 partition@2 {
 107                         label = "nsystem";
 108                         reg = <0x00600000 0x00a00000>;
 109                 };
 110                 partition@3 {
 111                         label = "nrootfs";
 112                         reg = <0x01000000 0x03000000>;
 113                 };
 114                 partition@4 {
 115                         label = "ncustfs";
 116                         reg = <0x04000000 0x3c000000>;
 117                 };
 118         };
 119 };
 120
 121 &pinctrl {
 122         pinctrl-names = "default";
 123         pinctrl-0 = <&nand_sel>;
 124         nand_sel: nand_sel {
 125                 function = "nand";
 126                 groups = "nand_grp";
 127         };
 128 };