2 * This file is licensed under the terms of the GNU General Public License
3 * version 2. This program is licensed "as is" without any warranty of any
4 * kind, whether express or implied.
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/pinctrl/omap.h>
10 #include "skeleton.dtsi"
13 compatible = "ti,dm816";
14 interrupt-parent = <&intc>;
30 compatible = "arm,cortex-a8";
37 compatible = "arm,cortex-a8-pmu";
42 * The soc node represents the soc top level view. It is used for IPs
43 * that are not memory mapped in the MPU view or for the MPU itself.
46 compatible = "ti,omap-infra";
48 compatible = "ti,omap3-mpu";
54 * XXX: Use a flat representation of the dm816x interconnect.
55 * The real dm816x interconnect network is quite complex. Since
56 * it will not bring real advantage to represent that in DT
57 * for the moment, just use a fake OCP bus entry to represent
58 * the whole bus hierarchy.
61 compatible = "ti,omap3-l3-smx", "simple-bus";
62 reg = <0x44000000 0x10000>;
67 ti,hwmods = "l3_main";
70 compatible = "ti,dm816-prcm";
71 reg = <0x48180000 0x4000>;
78 prcm_clockdomains: clockdomains {
83 compatible = "ti,dm816-scrm", "simple-bus";
84 reg = <0x48140000 0x21000>;
87 ranges = <0 0x48140000 0x21000>;
89 dm816x_pinmux: pinmux@800 {
90 compatible = "pinctrl-single";
94 pinctrl-single,register-width = <16>;
95 pinctrl-single,function-mask = <0xf>;
98 /* Device Configuration Registers */
99 scm_conf: syscon@600 {
100 compatible = "syscon", "simple-bus";
102 #address-cells = <1>;
104 ranges = <0 0x600 0x110>;
106 usb_phy0: usb-phy@20 {
107 compatible = "ti,dm8168-usb-phy";
110 clocks = <&main_fapll 6>;
111 clock-names = "refclk";
113 syscon = <&scm_conf>;
116 usb_phy1: usb-phy@28 {
117 compatible = "ti,dm8168-usb-phy";
120 clocks = <&main_fapll 6>;
121 clock-names = "refclk";
123 syscon = <&scm_conf>;
127 scrm_clocks: clocks {
128 #address-cells = <1>;
132 scrm_clockdomains: clockdomains {
136 edma: edma@49000000 {
137 compatible = "ti,edma3";
138 ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
139 reg = <0x49000000 0x10000>,
141 interrupts = <12 13 14>;
146 compatible = "ti,816-elm";
148 reg = <0x48080000 0x2000>;
152 gpio1: gpio@48032000 {
153 compatible = "ti,omap4-gpio";
156 reg = <0x48032000 0x1000>;
160 interrupt-controller;
161 #interrupt-cells = <2>;
164 gpio2: gpio@4804c000 {
165 compatible = "ti,omap4-gpio";
168 reg = <0x4804c000 0x1000>;
172 interrupt-controller;
173 #interrupt-cells = <2>;
176 gpmc: gpmc@50000000 {
177 compatible = "ti,am3352-gpmc";
179 reg = <0x50000000 0x2000>;
180 #address-cells = <2>;
184 gpmc,num-waitpins = <2>;
188 compatible = "ti,omap4-i2c";
190 reg = <0x48028000 0x1000>;
191 #address-cells = <1>;
194 dmas = <&edma 58 &edma 59>;
195 dma-names = "tx", "rx";
199 compatible = "ti,omap4-i2c";
201 reg = <0x4802a000 0x1000>;
202 #address-cells = <1>;
205 dmas = <&edma 60 &edma 61>;
206 dma-names = "tx", "rx";
209 intc: interrupt-controller@48200000 {
210 compatible = "ti,dm816-intc";
211 interrupt-controller;
212 #interrupt-cells = <1>;
213 reg = <0x48200000 0x1000>;
216 mailbox: mailbox@480c8000 {
217 compatible = "ti,omap4-mailbox";
218 reg = <0x480c8000 0x2000>;
220 ti,hwmods = "mailbox";
221 ti,mbox-num-users = <4>;
222 ti,mbox-num-fifos = <12>;
224 ti,mbox-tx = <3 0 0>;
225 ti,mbox-rx = <0 0 0>;
229 mdio: mdio@4a100800 {
230 compatible = "ti,davinci_mdio";
231 #address-cells = <1>;
233 reg = <0x4a100800 0x100>;
234 ti,hwmods = "davinci_mdio";
235 bus_freq = <1000000>;
236 phy0: ethernet-phy@0 {
239 phy1: ethernet-phy@1 {
244 eth0: ethernet@4a100000 {
245 compatible = "ti,dm816-emac";
247 reg = <0x4a100000 0x800
249 clocks = <&sysclk24_ck>;
250 syscon = <&scm_conf>;
251 ti,davinci-ctrl-reg-offset = <0>;
252 ti,davinci-ctrl-mod-reg-offset = <0x900>;
253 ti,davinci-ctrl-ram-offset = <0x2000>;
254 ti,davinci-ctrl-ram-size = <0x2000>;
255 interrupts = <40 41 42 43>;
256 phy-handle = <&phy0>;
259 eth1: ethernet@4a120000 {
260 compatible = "ti,dm816-emac";
262 reg = <0x4a120000 0x4000>;
263 clocks = <&sysclk24_ck>;
264 syscon = <&scm_conf>;
265 ti,davinci-ctrl-reg-offset = <0>;
266 ti,davinci-ctrl-mod-reg-offset = <0x900>;
267 ti,davinci-ctrl-ram-offset = <0x2000>;
268 ti,davinci-ctrl-ram-size = <0x2000>;
269 interrupts = <44 45 46 47>;
270 phy-handle = <&phy1>;
273 mcspi1: spi@48030000 {
274 compatible = "ti,omap4-mcspi";
275 reg = <0x48030000 0x1000>;
276 #address-cells = <1>;
280 ti,hwmods = "mcspi1";
281 dmas = <&edma 16 &edma 17
283 dma-names = "tx0", "rx0", "tx1", "rx1";
287 compatible = "ti,omap4-hsmmc";
288 reg = <0x48060000 0x11000>;
291 dmas = <&edma 24 &edma 25>;
292 dma-names = "tx", "rx";
295 timer1: timer@4802e000 {
296 compatible = "ti,dm816-timer";
297 reg = <0x4802e000 0x2000>;
299 ti,hwmods = "timer1";
303 timer2: timer@48040000 {
304 compatible = "ti,dm816-timer";
305 reg = <0x48040000 0x2000>;
307 ti,hwmods = "timer2";
310 timer3: timer@48042000 {
311 compatible = "ti,dm816-timer";
312 reg = <0x48042000 0x2000>;
314 ti,hwmods = "timer3";
317 timer4: timer@48044000 {
318 compatible = "ti,dm816-timer";
319 reg = <0x48044000 0x2000>;
321 ti,hwmods = "timer4";
324 timer5: timer@48046000 {
325 compatible = "ti,dm816-timer";
326 reg = <0x48046000 0x2000>;
328 ti,hwmods = "timer5";
331 timer6: timer@48048000 {
332 compatible = "ti,dm816-timer";
333 reg = <0x48048000 0x2000>;
335 ti,hwmods = "timer6";
338 timer7: timer@4804a000 {
339 compatible = "ti,dm816-timer";
340 reg = <0x4804a000 0x2000>;
342 ti,hwmods = "timer7";
345 uart1: uart@48020000 {
346 compatible = "ti,omap3-uart";
348 reg = <0x48020000 0x2000>;
349 clock-frequency = <48000000>;
351 dmas = <&edma 26 &edma 27>;
352 dma-names = "tx", "rx";
355 uart2: uart@48022000 {
356 compatible = "ti,omap3-uart";
358 reg = <0x48022000 0x2000>;
359 clock-frequency = <48000000>;
361 dmas = <&edma 28 &edma 29>;
362 dma-names = "tx", "rx";
365 uart3: uart@48024000 {
366 compatible = "ti,omap3-uart";
368 reg = <0x48024000 0x2000>;
369 clock-frequency = <48000000>;
371 dmas = <&edma 30 &edma 31>;
372 dma-names = "tx", "rx";
375 /* NOTE: USB needs a transceiver driver for phys to work */
376 usb: usb_otg_hs@47401000 {
377 compatible = "ti,am33xx-usb";
378 reg = <0x47401000 0x400000>;
380 #address-cells = <1>;
382 ti,hwmods = "usb_otg_hs";
385 compatible = "ti,musb-am33xx";
386 reg = <0x47401400 0x400
388 reg-names = "mc", "control";
390 interrupt-names = "mc";
392 interface-type = <0>;
394 phy-names = "usb2-phy";
395 mentor,multipoint = <1>;
396 mentor,num-eps = <16>;
397 mentor,ram-bits = <12>;
398 mentor,power = <500>;
402 compatible = "ti,musb-am33xx";
403 reg = <0x47401c00 0x400
405 reg-names = "mc", "control";
407 interrupt-names = "mc";
409 interface-type = <0>;
411 phy-names = "usb2-phy";
412 mentor,multipoint = <1>;
413 mentor,num-eps = <16>;
414 mentor,ram-bits = <12>;
415 mentor,power = <500>;
419 wd_timer2: wd_timer@480c2000 {
420 compatible = "ti,omap3-wdt";
421 ti,hwmods = "wd_timer";
422 reg = <0x480c2000 0x1000>;
428 #include "dm816x-clocks.dtsi"