2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/pinctrl/dra.h>
13 #include "skeleton.dtsi"
15 #define MAX_SOURCES 400
21 compatible = "ti,dra7xx";
22 interrupt-parent = <&crossbar_mpu>;
40 ethernet0 = &cpsw_emac0;
41 ethernet1 = &cpsw_emac1;
48 compatible = "arm,armv7-timer";
49 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
50 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
51 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
52 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
53 interrupt-parent = <&gic>;
56 gic: interrupt-controller@48211000 {
57 compatible = "arm,cortex-a15-gic";
59 #interrupt-cells = <3>;
60 reg = <0x0 0x48211000 0x0 0x1000>,
61 <0x0 0x48212000 0x0 0x1000>,
62 <0x0 0x48214000 0x0 0x2000>,
63 <0x0 0x48216000 0x0 0x2000>;
64 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
65 interrupt-parent = <&gic>;
68 wakeupgen: interrupt-controller@48281000 {
69 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
71 #interrupt-cells = <3>;
72 reg = <0x0 0x48281000 0x0 0x1000>;
73 interrupt-parent = <&gic>;
77 * The soc node represents the soc top level view. It is used for IPs
78 * that are not memory mapped in the MPU view or for the MPU itself.
81 compatible = "ti,omap-infra";
83 compatible = "ti,omap5-mpu";
89 * XXX: Use a flat representation of the SOC interconnect.
90 * The real OMAP interconnect network is quite complex.
91 * Since it will not bring real advantage to represent that in DT for
92 * the moment, just use a fake OCP bus entry to represent the whole bus
96 compatible = "ti,dra7-l3-noc", "simple-bus";
99 ranges = <0x0 0x0 0x0 0xc0000000>;
100 ti,hwmods = "l3_main_1", "l3_main_2";
101 reg = <0x0 0x44000000 0x0 0x1000000>,
102 <0x0 0x45000000 0x0 0x1000>;
103 interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
104 <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
106 l4_cfg: l4@4a000000 {
107 compatible = "ti,dra7-l4-cfg", "simple-bus";
108 #address-cells = <1>;
110 ranges = <0 0x4a000000 0x22c000>;
113 compatible = "ti,dra7-scm-core", "simple-bus";
114 reg = <0x2000 0x2000>;
115 #address-cells = <1>;
117 ranges = <0 0x2000 0x2000>;
119 scm_conf: scm_conf@0 {
120 compatible = "syscon", "simple-bus";
122 #address-cells = <1>;
124 ranges = <0 0x0 0x1400>;
126 pbias_regulator: pbias_regulator@e00 {
127 compatible = "ti,pbias-dra7", "ti,pbias-omap";
129 syscon = <&scm_conf>;
130 pbias_mmc_reg: pbias_mmc_omap5 {
131 regulator-name = "pbias_mmc_omap5";
132 regulator-min-microvolt = <1800000>;
133 regulator-max-microvolt = <3000000>;
137 scm_conf_clocks: clocks {
138 #address-cells = <1>;
143 dra7_pmx_core: pinmux@1400 {
144 compatible = "ti,dra7-padconf",
146 reg = <0x1400 0x0468>;
147 #address-cells = <1>;
149 #interrupt-cells = <1>;
150 interrupt-controller;
151 pinctrl-single,register-width = <32>;
152 pinctrl-single,function-mask = <0x3fffffff>;
155 scm_conf1: scm_conf@1c04 {
156 compatible = "syscon";
157 reg = <0x1c04 0x0020>;
160 scm_conf_pcie: scm_conf@1c24 {
161 compatible = "syscon";
162 reg = <0x1c24 0x0024>;
165 sdma_xbar: dma-router@b78 {
166 compatible = "ti,dra7-dma-crossbar";
169 dma-requests = <205>;
170 ti,dma-safe-map = <0>;
171 dma-masters = <&sdma>;
174 edma_xbar: dma-router@c78 {
175 compatible = "ti,dra7-dma-crossbar";
178 dma-requests = <204>;
179 ti,dma-safe-map = <0>;
180 dma-masters = <&edma>;
184 cm_core_aon: cm_core_aon@5000 {
185 compatible = "ti,dra7-cm-core-aon";
186 reg = <0x5000 0x2000>;
188 cm_core_aon_clocks: clocks {
189 #address-cells = <1>;
193 cm_core_aon_clockdomains: clockdomains {
197 cm_core: cm_core@8000 {
198 compatible = "ti,dra7-cm-core";
199 reg = <0x8000 0x3000>;
201 cm_core_clocks: clocks {
202 #address-cells = <1>;
206 cm_core_clockdomains: clockdomains {
211 l4_wkup: l4@4ae00000 {
212 compatible = "ti,dra7-l4-wkup", "simple-bus";
213 #address-cells = <1>;
215 ranges = <0 0x4ae00000 0x3f000>;
217 counter32k: counter@4000 {
218 compatible = "ti,omap-counter32k";
220 ti,hwmods = "counter_32k";
224 compatible = "ti,dra7-prm";
225 reg = <0x6000 0x3000>;
226 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
229 #address-cells = <1>;
233 prm_clockdomains: clockdomains {
239 compatible = "simple-bus";
241 #address-cells = <1>;
242 ranges = <0x51000000 0x51000000 0x3000
243 0x0 0x20000000 0x10000000>;
244 pcie1: pcie@51000000 {
245 compatible = "ti,dra7-pcie";
246 reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
247 reg-names = "rc_dbics", "ti_conf", "config";
248 interrupts = <0 232 0x4>, <0 233 0x4>;
249 #address-cells = <3>;
252 ranges = <0x81000000 0 0 0x03000 0 0x00010000
253 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
254 #interrupt-cells = <1>;
258 phy-names = "pcie-phy0";
259 interrupt-map-mask = <0 0 0 7>;
260 interrupt-map = <0 0 0 1 &pcie1_intc 1>,
261 <0 0 0 2 &pcie1_intc 2>,
262 <0 0 0 3 &pcie1_intc 3>,
263 <0 0 0 4 &pcie1_intc 4>;
264 pcie1_intc: interrupt-controller {
265 interrupt-controller;
266 #address-cells = <0>;
267 #interrupt-cells = <1>;
273 compatible = "simple-bus";
275 #address-cells = <1>;
276 ranges = <0x51800000 0x51800000 0x3000
277 0x0 0x30000000 0x10000000>;
280 compatible = "ti,dra7-pcie";
281 reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
282 reg-names = "rc_dbics", "ti_conf", "config";
283 interrupts = <0 355 0x4>, <0 356 0x4>;
284 #address-cells = <3>;
287 ranges = <0x81000000 0 0 0x03000 0 0x00010000
288 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
289 #interrupt-cells = <1>;
293 phy-names = "pcie-phy0";
294 interrupt-map-mask = <0 0 0 7>;
295 interrupt-map = <0 0 0 1 &pcie2_intc 1>,
296 <0 0 0 2 &pcie2_intc 2>,
297 <0 0 0 3 &pcie2_intc 3>,
298 <0 0 0 4 &pcie2_intc 4>;
299 pcie2_intc: interrupt-controller {
300 interrupt-controller;
301 #address-cells = <0>;
302 #interrupt-cells = <1>;
307 bandgap: bandgap@4a0021e0 {
308 reg = <0x4a0021e0 0xc
314 compatible = "ti,dra752-bandgap";
315 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
316 #thermal-sensor-cells = <1>;
319 dsp1_system: dsp_system@40d00000 {
320 compatible = "syscon";
321 reg = <0x40d00000 0x100>;
324 sdma: dma-controller@4a056000 {
325 compatible = "ti,omap4430-sdma";
326 reg = <0x4a056000 0x1000>;
327 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
328 <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
329 <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
330 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
333 dma-requests = <127>;
336 edma: edma@43300000 {
337 compatible = "ti,edma3-tpcc";
339 reg = <0x43300000 0x100000>;
340 reg-names = "edma3_cc";
341 interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
342 <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
343 <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
344 interrupt-names = "edma3_ccint", "emda3_mperr",
349 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
352 * memcpy is disabled, can be enabled with:
353 * ti,edma-memcpy-channels = <20 21>;
354 * for example. Note that these channels need to be
355 * masked in the xbar as well.
359 edma_tptc0: tptc@43400000 {
360 compatible = "ti,edma3-tptc";
362 reg = <0x43400000 0x100000>;
363 interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
364 interrupt-names = "edma3_tcerrint";
367 edma_tptc1: tptc@43500000 {
368 compatible = "ti,edma3-tptc";
370 reg = <0x43500000 0x100000>;
371 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
372 interrupt-names = "edma3_tcerrint";
375 gpio1: gpio@4ae10000 {
376 compatible = "ti,omap4-gpio";
377 reg = <0x4ae10000 0x200>;
378 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
382 interrupt-controller;
383 #interrupt-cells = <2>;
386 gpio2: gpio@48055000 {
387 compatible = "ti,omap4-gpio";
388 reg = <0x48055000 0x200>;
389 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
393 interrupt-controller;
394 #interrupt-cells = <2>;
397 gpio3: gpio@48057000 {
398 compatible = "ti,omap4-gpio";
399 reg = <0x48057000 0x200>;
400 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
404 interrupt-controller;
405 #interrupt-cells = <2>;
408 gpio4: gpio@48059000 {
409 compatible = "ti,omap4-gpio";
410 reg = <0x48059000 0x200>;
411 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
415 interrupt-controller;
416 #interrupt-cells = <2>;
419 gpio5: gpio@4805b000 {
420 compatible = "ti,omap4-gpio";
421 reg = <0x4805b000 0x200>;
422 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
426 interrupt-controller;
427 #interrupt-cells = <2>;
430 gpio6: gpio@4805d000 {
431 compatible = "ti,omap4-gpio";
432 reg = <0x4805d000 0x200>;
433 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
437 interrupt-controller;
438 #interrupt-cells = <2>;
441 gpio7: gpio@48051000 {
442 compatible = "ti,omap4-gpio";
443 reg = <0x48051000 0x200>;
444 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
448 interrupt-controller;
449 #interrupt-cells = <2>;
452 gpio8: gpio@48053000 {
453 compatible = "ti,omap4-gpio";
454 reg = <0x48053000 0x200>;
455 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
459 interrupt-controller;
460 #interrupt-cells = <2>;
463 uart1: serial@4806a000 {
464 compatible = "ti,dra742-uart", "ti,omap4-uart";
465 reg = <0x4806a000 0x100>;
466 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
468 clock-frequency = <48000000>;
470 dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
471 dma-names = "tx", "rx";
474 uart2: serial@4806c000 {
475 compatible = "ti,dra742-uart", "ti,omap4-uart";
476 reg = <0x4806c000 0x100>;
477 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
479 clock-frequency = <48000000>;
481 dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
482 dma-names = "tx", "rx";
485 uart3: serial@48020000 {
486 compatible = "ti,dra742-uart", "ti,omap4-uart";
487 reg = <0x48020000 0x100>;
488 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
490 clock-frequency = <48000000>;
492 dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
493 dma-names = "tx", "rx";
496 uart4: serial@4806e000 {
497 compatible = "ti,dra742-uart", "ti,omap4-uart";
498 reg = <0x4806e000 0x100>;
499 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
501 clock-frequency = <48000000>;
503 dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
504 dma-names = "tx", "rx";
507 uart5: serial@48066000 {
508 compatible = "ti,dra742-uart", "ti,omap4-uart";
509 reg = <0x48066000 0x100>;
510 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
512 clock-frequency = <48000000>;
514 dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
515 dma-names = "tx", "rx";
518 uart6: serial@48068000 {
519 compatible = "ti,dra742-uart", "ti,omap4-uart";
520 reg = <0x48068000 0x100>;
521 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
523 clock-frequency = <48000000>;
525 dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
526 dma-names = "tx", "rx";
529 uart7: serial@48420000 {
530 compatible = "ti,dra742-uart", "ti,omap4-uart";
531 reg = <0x48420000 0x100>;
532 interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
534 clock-frequency = <48000000>;
538 uart8: serial@48422000 {
539 compatible = "ti,dra742-uart", "ti,omap4-uart";
540 reg = <0x48422000 0x100>;
541 interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
543 clock-frequency = <48000000>;
547 uart9: serial@48424000 {
548 compatible = "ti,dra742-uart", "ti,omap4-uart";
549 reg = <0x48424000 0x100>;
550 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
552 clock-frequency = <48000000>;
556 uart10: serial@4ae2b000 {
557 compatible = "ti,dra742-uart", "ti,omap4-uart";
558 reg = <0x4ae2b000 0x100>;
559 interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
560 ti,hwmods = "uart10";
561 clock-frequency = <48000000>;
565 mailbox1: mailbox@4a0f4000 {
566 compatible = "ti,omap4-mailbox";
567 reg = <0x4a0f4000 0x200>;
568 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
569 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
570 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
571 ti,hwmods = "mailbox1";
573 ti,mbox-num-users = <3>;
574 ti,mbox-num-fifos = <8>;
578 mailbox2: mailbox@4883a000 {
579 compatible = "ti,omap4-mailbox";
580 reg = <0x4883a000 0x200>;
581 interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
582 <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
583 <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
584 <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
585 ti,hwmods = "mailbox2";
587 ti,mbox-num-users = <4>;
588 ti,mbox-num-fifos = <12>;
592 mailbox3: mailbox@4883c000 {
593 compatible = "ti,omap4-mailbox";
594 reg = <0x4883c000 0x200>;
595 interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
596 <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
597 <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
598 <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
599 ti,hwmods = "mailbox3";
601 ti,mbox-num-users = <4>;
602 ti,mbox-num-fifos = <12>;
606 mailbox4: mailbox@4883e000 {
607 compatible = "ti,omap4-mailbox";
608 reg = <0x4883e000 0x200>;
609 interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
610 <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
611 <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
612 <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
613 ti,hwmods = "mailbox4";
615 ti,mbox-num-users = <4>;
616 ti,mbox-num-fifos = <12>;
620 mailbox5: mailbox@48840000 {
621 compatible = "ti,omap4-mailbox";
622 reg = <0x48840000 0x200>;
623 interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
624 <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
625 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
626 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
627 ti,hwmods = "mailbox5";
629 ti,mbox-num-users = <4>;
630 ti,mbox-num-fifos = <12>;
634 mailbox6: mailbox@48842000 {
635 compatible = "ti,omap4-mailbox";
636 reg = <0x48842000 0x200>;
637 interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
638 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
639 <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
640 <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
641 ti,hwmods = "mailbox6";
643 ti,mbox-num-users = <4>;
644 ti,mbox-num-fifos = <12>;
648 mailbox7: mailbox@48844000 {
649 compatible = "ti,omap4-mailbox";
650 reg = <0x48844000 0x200>;
651 interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
652 <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
653 <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
654 <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
655 ti,hwmods = "mailbox7";
657 ti,mbox-num-users = <4>;
658 ti,mbox-num-fifos = <12>;
662 mailbox8: mailbox@48846000 {
663 compatible = "ti,omap4-mailbox";
664 reg = <0x48846000 0x200>;
665 interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
666 <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
667 <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
668 <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
669 ti,hwmods = "mailbox8";
671 ti,mbox-num-users = <4>;
672 ti,mbox-num-fifos = <12>;
676 mailbox9: mailbox@4885e000 {
677 compatible = "ti,omap4-mailbox";
678 reg = <0x4885e000 0x200>;
679 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
680 <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
681 <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
682 <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
683 ti,hwmods = "mailbox9";
685 ti,mbox-num-users = <4>;
686 ti,mbox-num-fifos = <12>;
690 mailbox10: mailbox@48860000 {
691 compatible = "ti,omap4-mailbox";
692 reg = <0x48860000 0x200>;
693 interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
694 <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
695 <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
696 <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
697 ti,hwmods = "mailbox10";
699 ti,mbox-num-users = <4>;
700 ti,mbox-num-fifos = <12>;
704 mailbox11: mailbox@48862000 {
705 compatible = "ti,omap4-mailbox";
706 reg = <0x48862000 0x200>;
707 interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
708 <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
709 <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
710 <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
711 ti,hwmods = "mailbox11";
713 ti,mbox-num-users = <4>;
714 ti,mbox-num-fifos = <12>;
718 mailbox12: mailbox@48864000 {
719 compatible = "ti,omap4-mailbox";
720 reg = <0x48864000 0x200>;
721 interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
722 <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
723 <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
724 <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
725 ti,hwmods = "mailbox12";
727 ti,mbox-num-users = <4>;
728 ti,mbox-num-fifos = <12>;
732 mailbox13: mailbox@48802000 {
733 compatible = "ti,omap4-mailbox";
734 reg = <0x48802000 0x200>;
735 interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
736 <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
737 <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
738 <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
739 ti,hwmods = "mailbox13";
741 ti,mbox-num-users = <4>;
742 ti,mbox-num-fifos = <12>;
746 timer1: timer@4ae18000 {
747 compatible = "ti,omap5430-timer";
748 reg = <0x4ae18000 0x80>;
749 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
750 ti,hwmods = "timer1";
754 timer2: timer@48032000 {
755 compatible = "ti,omap5430-timer";
756 reg = <0x48032000 0x80>;
757 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
758 ti,hwmods = "timer2";
761 timer3: timer@48034000 {
762 compatible = "ti,omap5430-timer";
763 reg = <0x48034000 0x80>;
764 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
765 ti,hwmods = "timer3";
768 timer4: timer@48036000 {
769 compatible = "ti,omap5430-timer";
770 reg = <0x48036000 0x80>;
771 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
772 ti,hwmods = "timer4";
775 timer5: timer@48820000 {
776 compatible = "ti,omap5430-timer";
777 reg = <0x48820000 0x80>;
778 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
779 ti,hwmods = "timer5";
782 timer6: timer@48822000 {
783 compatible = "ti,omap5430-timer";
784 reg = <0x48822000 0x80>;
785 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
786 ti,hwmods = "timer6";
789 timer7: timer@48824000 {
790 compatible = "ti,omap5430-timer";
791 reg = <0x48824000 0x80>;
792 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
793 ti,hwmods = "timer7";
796 timer8: timer@48826000 {
797 compatible = "ti,omap5430-timer";
798 reg = <0x48826000 0x80>;
799 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
800 ti,hwmods = "timer8";
803 timer9: timer@4803e000 {
804 compatible = "ti,omap5430-timer";
805 reg = <0x4803e000 0x80>;
806 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
807 ti,hwmods = "timer9";
810 timer10: timer@48086000 {
811 compatible = "ti,omap5430-timer";
812 reg = <0x48086000 0x80>;
813 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
814 ti,hwmods = "timer10";
817 timer11: timer@48088000 {
818 compatible = "ti,omap5430-timer";
819 reg = <0x48088000 0x80>;
820 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
821 ti,hwmods = "timer11";
824 timer12: timer@4ae20000 {
825 compatible = "ti,omap5430-timer";
826 reg = <0x4ae20000 0x80>;
827 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
828 ti,hwmods = "timer12";
833 timer13: timer@48828000 {
834 compatible = "ti,omap5430-timer";
835 reg = <0x48828000 0x80>;
836 interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
837 ti,hwmods = "timer13";
840 timer14: timer@4882a000 {
841 compatible = "ti,omap5430-timer";
842 reg = <0x4882a000 0x80>;
843 interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
844 ti,hwmods = "timer14";
847 timer15: timer@4882c000 {
848 compatible = "ti,omap5430-timer";
849 reg = <0x4882c000 0x80>;
850 interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
851 ti,hwmods = "timer15";
854 timer16: timer@4882e000 {
855 compatible = "ti,omap5430-timer";
856 reg = <0x4882e000 0x80>;
857 interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
858 ti,hwmods = "timer16";
862 compatible = "ti,omap3-wdt";
863 reg = <0x4ae14000 0x80>;
864 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
865 ti,hwmods = "wd_timer2";
868 hwspinlock: spinlock@4a0f6000 {
869 compatible = "ti,omap4-hwspinlock";
870 reg = <0x4a0f6000 0x1000>;
871 ti,hwmods = "spinlock";
876 compatible = "ti,omap5-dmm";
877 reg = <0x4e000000 0x800>;
878 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
883 compatible = "ti,omap4-i2c";
884 reg = <0x48070000 0x100>;
885 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
886 #address-cells = <1>;
893 compatible = "ti,omap4-i2c";
894 reg = <0x48072000 0x100>;
895 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
896 #address-cells = <1>;
903 compatible = "ti,omap4-i2c";
904 reg = <0x48060000 0x100>;
905 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
906 #address-cells = <1>;
913 compatible = "ti,omap4-i2c";
914 reg = <0x4807a000 0x100>;
915 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
916 #address-cells = <1>;
923 compatible = "ti,omap4-i2c";
924 reg = <0x4807c000 0x100>;
925 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
926 #address-cells = <1>;
933 compatible = "ti,omap4-hsmmc";
934 reg = <0x4809c000 0x400>;
935 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
938 ti,needs-special-reset;
939 dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
940 dma-names = "tx", "rx";
942 pbias-supply = <&pbias_mmc_reg>;
946 compatible = "ti,omap4-hsmmc";
947 reg = <0x480b4000 0x400>;
948 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
950 ti,needs-special-reset;
951 dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
952 dma-names = "tx", "rx";
957 compatible = "ti,omap4-hsmmc";
958 reg = <0x480ad000 0x400>;
959 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
961 ti,needs-special-reset;
962 dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
963 dma-names = "tx", "rx";
968 compatible = "ti,omap4-hsmmc";
969 reg = <0x480d1000 0x400>;
970 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
972 ti,needs-special-reset;
973 dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
974 dma-names = "tx", "rx";
978 mmu0_dsp1: mmu@40d01000 {
979 compatible = "ti,dra7-dsp-iommu";
980 reg = <0x40d01000 0x100>;
981 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
982 ti,hwmods = "mmu0_dsp1";
984 ti,syscon-mmuconfig = <&dsp1_system 0x0>;
988 mmu1_dsp1: mmu@40d02000 {
989 compatible = "ti,dra7-dsp-iommu";
990 reg = <0x40d02000 0x100>;
991 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
992 ti,hwmods = "mmu1_dsp1";
994 ti,syscon-mmuconfig = <&dsp1_system 0x1>;
998 mmu_ipu1: mmu@58882000 {
999 compatible = "ti,dra7-iommu";
1000 reg = <0x58882000 0x100>;
1001 interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
1002 ti,hwmods = "mmu_ipu1";
1004 ti,iommu-bus-err-back;
1005 status = "disabled";
1008 mmu_ipu2: mmu@55082000 {
1009 compatible = "ti,dra7-iommu";
1010 reg = <0x55082000 0x100>;
1011 interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
1012 ti,hwmods = "mmu_ipu2";
1014 ti,iommu-bus-err-back;
1015 status = "disabled";
1018 abb_mpu: regulator-abb-mpu {
1019 compatible = "ti,abb-v3";
1020 regulator-name = "abb_mpu";
1021 #address-cells = <0>;
1023 clocks = <&sys_clkin1>;
1024 ti,settling-time = <50>;
1025 ti,clock-cycles = <16>;
1027 reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
1028 <0x4ae06014 0x4>, <0x4a003b20 0xc>,
1030 reg-names = "setup-address", "control-address",
1031 "int-address", "efuse-address",
1033 ti,tranxdone-status-mask = <0x80>;
1034 /* LDOVBBMPU_FBB_MUX_CTRL */
1035 ti,ldovbb-override-mask = <0x400>;
1036 /* LDOVBBMPU_FBB_VSET_OUT */
1037 ti,ldovbb-vset-mask = <0x1F>;
1040 * NOTE: only FBB mode used but actual vset will
1041 * determine final biasing
1044 /*uV ABB efuse rbb_m fbb_m vset_m*/
1045 1060000 0 0x0 0 0x02000000 0x01F00000
1046 1160000 0 0x4 0 0x02000000 0x01F00000
1047 1210000 0 0x8 0 0x02000000 0x01F00000
1051 abb_ivahd: regulator-abb-ivahd {
1052 compatible = "ti,abb-v3";
1053 regulator-name = "abb_ivahd";
1054 #address-cells = <0>;
1056 clocks = <&sys_clkin1>;
1057 ti,settling-time = <50>;
1058 ti,clock-cycles = <16>;
1060 reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
1061 <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
1063 reg-names = "setup-address", "control-address",
1064 "int-address", "efuse-address",
1066 ti,tranxdone-status-mask = <0x40000000>;
1067 /* LDOVBBIVA_FBB_MUX_CTRL */
1068 ti,ldovbb-override-mask = <0x400>;
1069 /* LDOVBBIVA_FBB_VSET_OUT */
1070 ti,ldovbb-vset-mask = <0x1F>;
1073 * NOTE: only FBB mode used but actual vset will
1074 * determine final biasing
1077 /*uV ABB efuse rbb_m fbb_m vset_m*/
1078 1055000 0 0x0 0 0x02000000 0x01F00000
1079 1150000 0 0x4 0 0x02000000 0x01F00000
1080 1250000 0 0x8 0 0x02000000 0x01F00000
1084 abb_dspeve: regulator-abb-dspeve {
1085 compatible = "ti,abb-v3";
1086 regulator-name = "abb_dspeve";
1087 #address-cells = <0>;
1089 clocks = <&sys_clkin1>;
1090 ti,settling-time = <50>;
1091 ti,clock-cycles = <16>;
1093 reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
1094 <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
1096 reg-names = "setup-address", "control-address",
1097 "int-address", "efuse-address",
1099 ti,tranxdone-status-mask = <0x20000000>;
1100 /* LDOVBBDSPEVE_FBB_MUX_CTRL */
1101 ti,ldovbb-override-mask = <0x400>;
1102 /* LDOVBBDSPEVE_FBB_VSET_OUT */
1103 ti,ldovbb-vset-mask = <0x1F>;
1106 * NOTE: only FBB mode used but actual vset will
1107 * determine final biasing
1110 /*uV ABB efuse rbb_m fbb_m vset_m*/
1111 1055000 0 0x0 0 0x02000000 0x01F00000
1112 1150000 0 0x4 0 0x02000000 0x01F00000
1113 1250000 0 0x8 0 0x02000000 0x01F00000
1117 abb_gpu: regulator-abb-gpu {
1118 compatible = "ti,abb-v3";
1119 regulator-name = "abb_gpu";
1120 #address-cells = <0>;
1122 clocks = <&sys_clkin1>;
1123 ti,settling-time = <50>;
1124 ti,clock-cycles = <16>;
1126 reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
1127 <0x4ae06010 0x4>, <0x4a003b08 0xc>,
1129 reg-names = "setup-address", "control-address",
1130 "int-address", "efuse-address",
1132 ti,tranxdone-status-mask = <0x10000000>;
1133 /* LDOVBBGPU_FBB_MUX_CTRL */
1134 ti,ldovbb-override-mask = <0x400>;
1135 /* LDOVBBGPU_FBB_VSET_OUT */
1136 ti,ldovbb-vset-mask = <0x1F>;
1139 * NOTE: only FBB mode used but actual vset will
1140 * determine final biasing
1143 /*uV ABB efuse rbb_m fbb_m vset_m*/
1144 1090000 0 0x0 0 0x02000000 0x01F00000
1145 1210000 0 0x4 0 0x02000000 0x01F00000
1146 1280000 0 0x8 0 0x02000000 0x01F00000
1150 mcspi1: spi@48098000 {
1151 compatible = "ti,omap4-mcspi";
1152 reg = <0x48098000 0x200>;
1153 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
1154 #address-cells = <1>;
1156 ti,hwmods = "mcspi1";
1157 ti,spi-num-cs = <4>;
1158 dmas = <&sdma_xbar 35>,
1166 dma-names = "tx0", "rx0", "tx1", "rx1",
1167 "tx2", "rx2", "tx3", "rx3";
1168 status = "disabled";
1171 mcspi2: spi@4809a000 {
1172 compatible = "ti,omap4-mcspi";
1173 reg = <0x4809a000 0x200>;
1174 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
1175 #address-cells = <1>;
1177 ti,hwmods = "mcspi2";
1178 ti,spi-num-cs = <2>;
1179 dmas = <&sdma_xbar 43>,
1183 dma-names = "tx0", "rx0", "tx1", "rx1";
1184 status = "disabled";
1187 mcspi3: spi@480b8000 {
1188 compatible = "ti,omap4-mcspi";
1189 reg = <0x480b8000 0x200>;
1190 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1191 #address-cells = <1>;
1193 ti,hwmods = "mcspi3";
1194 ti,spi-num-cs = <2>;
1195 dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
1196 dma-names = "tx0", "rx0";
1197 status = "disabled";
1200 mcspi4: spi@480ba000 {
1201 compatible = "ti,omap4-mcspi";
1202 reg = <0x480ba000 0x200>;
1203 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1204 #address-cells = <1>;
1206 ti,hwmods = "mcspi4";
1207 ti,spi-num-cs = <1>;
1208 dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
1209 dma-names = "tx0", "rx0";
1210 status = "disabled";
1213 qspi: qspi@4b300000 {
1214 compatible = "ti,dra7xxx-qspi";
1215 reg = <0x4b300000 0x100>,
1216 <0x5c000000 0x4000000>;
1217 reg-names = "qspi_base", "qspi_mmap";
1218 syscon-chipselects = <&scm_conf 0x558>;
1219 #address-cells = <1>;
1222 clocks = <&qspi_gfclk_div>;
1223 clock-names = "fck";
1225 interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
1226 status = "disabled";
1231 compatible = "ti,omap-ocp2scp";
1232 #address-cells = <1>;
1235 reg = <0x4a090000 0x20>;
1236 ti,hwmods = "ocp2scp3";
1237 sata_phy: phy@4A096000 {
1238 compatible = "ti,phy-pipe3-sata";
1239 reg = <0x4A096000 0x80>, /* phy_rx */
1240 <0x4A096400 0x64>, /* phy_tx */
1241 <0x4A096800 0x40>; /* pll_ctrl */
1242 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1243 syscon-phy-power = <&scm_conf 0x374>;
1244 clocks = <&sys_clkin1>, <&sata_ref_clk>;
1245 clock-names = "sysclk", "refclk";
1246 syscon-pllreset = <&scm_conf 0x3fc>;
1250 pcie1_phy: pciephy@4a094000 {
1251 compatible = "ti,phy-pipe3-pcie";
1252 reg = <0x4a094000 0x80>, /* phy_rx */
1253 <0x4a094400 0x64>; /* phy_tx */
1254 reg-names = "phy_rx", "phy_tx";
1255 syscon-phy-power = <&scm_conf_pcie 0x1c>;
1256 syscon-pcs = <&scm_conf_pcie 0x10>;
1257 clocks = <&dpll_pcie_ref_ck>,
1258 <&dpll_pcie_ref_m2ldo_ck>,
1259 <&optfclk_pciephy1_32khz>,
1260 <&optfclk_pciephy1_clk>,
1261 <&optfclk_pciephy1_div_clk>,
1262 <&optfclk_pciephy_div>,
1264 clock-names = "dpll_ref", "dpll_ref_m2",
1265 "wkupclk", "refclk",
1266 "div-clk", "phy-div", "sysclk";
1270 pcie2_phy: pciephy@4a095000 {
1271 compatible = "ti,phy-pipe3-pcie";
1272 reg = <0x4a095000 0x80>, /* phy_rx */
1273 <0x4a095400 0x64>; /* phy_tx */
1274 reg-names = "phy_rx", "phy_tx";
1275 syscon-phy-power = <&scm_conf_pcie 0x20>;
1276 syscon-pcs = <&scm_conf_pcie 0x10>;
1277 clocks = <&dpll_pcie_ref_ck>,
1278 <&dpll_pcie_ref_m2ldo_ck>,
1279 <&optfclk_pciephy2_32khz>,
1280 <&optfclk_pciephy2_clk>,
1281 <&optfclk_pciephy2_div_clk>,
1282 <&optfclk_pciephy_div>,
1284 clock-names = "dpll_ref", "dpll_ref_m2",
1285 "wkupclk", "refclk",
1286 "div-clk", "phy-div", "sysclk";
1288 status = "disabled";
1292 sata: sata@4a141100 {
1293 compatible = "snps,dwc-ahci";
1294 reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
1295 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1297 phy-names = "sata-phy";
1298 clocks = <&sata_ref_clk>;
1303 compatible = "ti,am3352-rtc";
1304 reg = <0x48838000 0x100>;
1305 interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
1306 <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
1307 ti,hwmods = "rtcss";
1308 clocks = <&sys_32k_ck>;
1313 compatible = "ti,omap-ocp2scp";
1314 #address-cells = <1>;
1317 reg = <0x4a080000 0x20>;
1318 ti,hwmods = "ocp2scp1";
1320 usb2_phy1: phy@4a084000 {
1321 compatible = "ti,omap-usb2";
1322 reg = <0x4a084000 0x400>;
1323 syscon-phy-power = <&scm_conf 0x300>;
1324 clocks = <&usb_phy1_always_on_clk32k>,
1325 <&usb_otg_ss1_refclk960m>;
1326 clock-names = "wkupclk",
1331 usb2_phy2: phy@4a085000 {
1332 compatible = "ti,dra7x-usb2-phy2",
1334 reg = <0x4a085000 0x400>;
1335 syscon-phy-power = <&scm_conf 0xe74>;
1336 clocks = <&usb_phy2_always_on_clk32k>,
1337 <&usb_otg_ss2_refclk960m>;
1338 clock-names = "wkupclk",
1343 usb3_phy1: phy@4a084400 {
1344 compatible = "ti,omap-usb3";
1345 reg = <0x4a084400 0x80>,
1348 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1349 syscon-phy-power = <&scm_conf 0x370>;
1350 clocks = <&usb_phy3_always_on_clk32k>,
1352 <&usb_otg_ss1_refclk960m>;
1353 clock-names = "wkupclk",
1360 omap_dwc3_1: omap_dwc3_1@48880000 {
1361 compatible = "ti,dwc3";
1362 ti,hwmods = "usb_otg_ss1";
1363 reg = <0x48880000 0x10000>;
1364 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1365 #address-cells = <1>;
1369 usb1: usb@48890000 {
1370 compatible = "snps,dwc3";
1371 reg = <0x48890000 0x17000>;
1372 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1373 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1374 <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1375 interrupt-names = "peripheral",
1378 phys = <&usb2_phy1>, <&usb3_phy1>;
1379 phy-names = "usb2-phy", "usb3-phy";
1380 maximum-speed = "super-speed";
1382 snps,dis_u3_susphy_quirk;
1383 snps,dis_u2_susphy_quirk;
1387 omap_dwc3_2: omap_dwc3_2@488c0000 {
1388 compatible = "ti,dwc3";
1389 ti,hwmods = "usb_otg_ss2";
1390 reg = <0x488c0000 0x10000>;
1391 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1392 #address-cells = <1>;
1396 usb2: usb@488d0000 {
1397 compatible = "snps,dwc3";
1398 reg = <0x488d0000 0x17000>;
1399 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1400 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1401 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1402 interrupt-names = "peripheral",
1405 phys = <&usb2_phy2>;
1406 phy-names = "usb2-phy";
1407 maximum-speed = "high-speed";
1409 snps,dis_u3_susphy_quirk;
1410 snps,dis_u2_susphy_quirk;
1414 /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
1415 omap_dwc3_3: omap_dwc3_3@48900000 {
1416 compatible = "ti,dwc3";
1417 ti,hwmods = "usb_otg_ss3";
1418 reg = <0x48900000 0x10000>;
1419 interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1420 #address-cells = <1>;
1424 status = "disabled";
1425 usb3: usb@48910000 {
1426 compatible = "snps,dwc3";
1427 reg = <0x48910000 0x17000>;
1428 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1429 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1430 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1431 interrupt-names = "peripheral",
1434 maximum-speed = "high-speed";
1436 snps,dis_u3_susphy_quirk;
1437 snps,dis_u2_susphy_quirk;
1442 compatible = "ti,am3352-elm";
1443 reg = <0x48078000 0xfc0>; /* device IO registers */
1444 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
1446 status = "disabled";
1449 gpmc: gpmc@50000000 {
1450 compatible = "ti,am3352-gpmc";
1452 reg = <0x50000000 0x37c>; /* device IO registers */
1453 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1455 gpmc,num-waitpins = <2>;
1456 #address-cells = <2>;
1458 interrupt-controller;
1459 #interrupt-cells = <2>;
1462 status = "disabled";
1466 compatible = "ti,dra7-atl";
1467 reg = <0x4843c000 0x3ff>;
1469 ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
1470 <&atl_clkin2_ck>, <&atl_clkin3_ck>;
1471 clocks = <&atl_gfclk_mux>;
1472 clock-names = "fck";
1473 status = "disabled";
1476 mcasp1: mcasp@48460000 {
1477 compatible = "ti,dra7-mcasp-audio";
1478 ti,hwmods = "mcasp1";
1479 reg = <0x48460000 0x2000>,
1480 <0x45800000 0x1000>;
1481 reg-names = "mpu","dat";
1482 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1483 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
1484 interrupt-names = "tx", "rx";
1485 dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
1486 dma-names = "tx", "rx";
1487 clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
1488 <&mcasp1_ahclkr_mux>;
1489 clock-names = "fck", "ahclkx", "ahclkr";
1490 status = "disabled";
1493 mcasp2: mcasp@48464000 {
1494 compatible = "ti,dra7-mcasp-audio";
1495 ti,hwmods = "mcasp2";
1496 reg = <0x48464000 0x2000>,
1497 <0x45c00000 0x1000>;
1498 reg-names = "mpu","dat";
1499 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
1500 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
1501 interrupt-names = "tx", "rx";
1502 dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
1503 dma-names = "tx", "rx";
1504 clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
1505 <&mcasp2_ahclkr_mux>;
1506 clock-names = "fck", "ahclkx", "ahclkr";
1507 status = "disabled";
1510 mcasp3: mcasp@48468000 {
1511 compatible = "ti,dra7-mcasp-audio";
1512 ti,hwmods = "mcasp3";
1513 reg = <0x48468000 0x2000>,
1514 <0x46000000 0x1000>;
1515 reg-names = "mpu","dat";
1516 interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
1517 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
1518 interrupt-names = "tx", "rx";
1519 dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
1520 dma-names = "tx", "rx";
1521 clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
1522 clock-names = "fck", "ahclkx";
1523 status = "disabled";
1526 mcasp4: mcasp@4846c000 {
1527 compatible = "ti,dra7-mcasp-audio";
1528 ti,hwmods = "mcasp4";
1529 reg = <0x4846c000 0x2000>,
1530 <0x48436000 0x1000>;
1531 reg-names = "mpu","dat";
1532 interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
1533 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
1534 interrupt-names = "tx", "rx";
1535 dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
1536 dma-names = "tx", "rx";
1537 clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
1538 clock-names = "fck", "ahclkx";
1539 status = "disabled";
1542 mcasp5: mcasp@48470000 {
1543 compatible = "ti,dra7-mcasp-audio";
1544 ti,hwmods = "mcasp5";
1545 reg = <0x48470000 0x2000>,
1546 <0x4843a000 0x1000>;
1547 reg-names = "mpu","dat";
1548 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
1549 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
1550 interrupt-names = "tx", "rx";
1551 dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
1552 dma-names = "tx", "rx";
1553 clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
1554 clock-names = "fck", "ahclkx";
1555 status = "disabled";
1558 mcasp6: mcasp@48474000 {
1559 compatible = "ti,dra7-mcasp-audio";
1560 ti,hwmods = "mcasp6";
1561 reg = <0x48474000 0x2000>,
1562 <0x4844c000 0x1000>;
1563 reg-names = "mpu","dat";
1564 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
1565 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
1566 interrupt-names = "tx", "rx";
1567 dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
1568 dma-names = "tx", "rx";
1569 clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
1570 clock-names = "fck", "ahclkx";
1571 status = "disabled";
1574 mcasp7: mcasp@48478000 {
1575 compatible = "ti,dra7-mcasp-audio";
1576 ti,hwmods = "mcasp7";
1577 reg = <0x48478000 0x2000>,
1578 <0x48450000 0x1000>;
1579 reg-names = "mpu","dat";
1580 interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
1581 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
1582 interrupt-names = "tx", "rx";
1583 dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
1584 dma-names = "tx", "rx";
1585 clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
1586 clock-names = "fck", "ahclkx";
1587 status = "disabled";
1590 mcasp8: mcasp@4847c000 {
1591 compatible = "ti,dra7-mcasp-audio";
1592 ti,hwmods = "mcasp8";
1593 reg = <0x4847c000 0x2000>,
1594 <0x48454000 0x1000>;
1595 reg-names = "mpu","dat";
1596 interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
1597 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
1598 interrupt-names = "tx", "rx";
1599 dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
1600 dma-names = "tx", "rx";
1601 clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
1602 clock-names = "fck", "ahclkx";
1603 status = "disabled";
1606 crossbar_mpu: crossbar@4a002a48 {
1607 compatible = "ti,irq-crossbar";
1608 reg = <0x4a002a48 0x130>;
1609 interrupt-controller;
1610 interrupt-parent = <&wakeupgen>;
1611 #interrupt-cells = <3>;
1612 ti,max-irqs = <160>;
1613 ti,max-crossbar-sources = <MAX_SOURCES>;
1615 ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
1616 ti,irqs-skip = <10 133 139 140>;
1617 ti,irqs-safe-map = <0>;
1620 mac: ethernet@48484000 {
1621 compatible = "ti,dra7-cpsw","ti,cpsw";
1623 clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
1624 clock-names = "fck", "cpts";
1625 cpdma_channels = <8>;
1626 ale_entries = <1024>;
1627 bd_ram_size = <0x2000>;
1630 mac_control = <0x20>;
1633 cpts_clock_mult = <0x80000000>;
1634 cpts_clock_shift = <29>;
1635 reg = <0x48484000 0x1000
1637 #address-cells = <1>;
1641 * Do not allow gating of cpsw clock as workaround
1642 * for errata i877. Keeping internal clock disabled
1643 * causes the device switching characteristics
1644 * to degrade over time and eventually fail to meet
1645 * the data manual delay time/skew specs.
1655 interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1656 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1657 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1658 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
1660 syscon = <&scm_conf>;
1661 status = "disabled";
1663 davinci_mdio: mdio@48485000 {
1664 compatible = "ti,davinci_mdio";
1665 #address-cells = <1>;
1667 ti,hwmods = "davinci_mdio";
1668 bus_freq = <1000000>;
1669 reg = <0x48485000 0x100>;
1672 cpsw_emac0: slave@48480200 {
1673 /* Filled in by U-Boot */
1674 mac-address = [ 00 00 00 00 00 00 ];
1677 cpsw_emac1: slave@48480300 {
1678 /* Filled in by U-Boot */
1679 mac-address = [ 00 00 00 00 00 00 ];
1682 phy_sel: cpsw-phy-sel@4a002554 {
1683 compatible = "ti,dra7xx-cpsw-phy-sel";
1684 reg= <0x4a002554 0x4>;
1685 reg-names = "gmii-sel";
1689 dcan1: can@481cc000 {
1690 compatible = "ti,dra7-d_can";
1691 ti,hwmods = "dcan1";
1692 reg = <0x4ae3c000 0x2000>;
1693 syscon-raminit = <&scm_conf 0x558 0>;
1694 interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
1695 clocks = <&dcan1_sys_clk_mux>;
1696 status = "disabled";
1699 dcan2: can@481d0000 {
1700 compatible = "ti,dra7-d_can";
1701 ti,hwmods = "dcan2";
1702 reg = <0x48480000 0x2000>;
1703 syscon-raminit = <&scm_conf 0x558 1>;
1704 interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
1705 clocks = <&sys_clkin1>;
1706 status = "disabled";
1710 compatible = "ti,dra7-dss";
1711 /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
1712 /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
1713 status = "disabled";
1714 ti,hwmods = "dss_core";
1715 /* CTRL_CORE_DSS_PLL_CONTROL */
1716 syscon-pll-ctrl = <&scm_conf 0x538>;
1717 #address-cells = <1>;
1722 compatible = "ti,dra7-dispc";
1723 reg = <0x58001000 0x1000>;
1724 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
1725 ti,hwmods = "dss_dispc";
1726 clocks = <&dss_dss_clk>;
1727 clock-names = "fck";
1728 /* CTRL_CORE_SMA_SW_1 */
1729 syscon-pol = <&scm_conf 0x534>;
1732 hdmi: encoder@58060000 {
1733 compatible = "ti,dra7-hdmi";
1734 reg = <0x58040000 0x200>,
1737 <0x58060000 0x19000>;
1738 reg-names = "wp", "pll", "phy", "core";
1739 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1740 status = "disabled";
1741 ti,hwmods = "dss_hdmi";
1742 clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
1743 clock-names = "fck", "sys_clk";
1748 thermal_zones: thermal-zones {
1749 #include "omap4-cpu-thermal.dtsi"
1750 #include "omap5-gpu-thermal.dtsi"
1751 #include "omap5-core-thermal.dtsi"
1752 #include "dra7-dspeve-thermal.dtsi"
1753 #include "dra7-iva-thermal.dtsi"
1759 polling-delay = <500>; /* milliseconds */
1762 /include/ "dra7xx-clocks.dtsi"