ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards
[deliverable/linux.git] / arch / arm / boot / dts / exynos3250-monk.dts
1 /*
2 * Samsung's Exynos3250 based Monk board device tree source
3 *
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 *
7 * Device tree source file for Samsung's Monk board which is based on
8 * Samsung Exynos3250 SoC.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15 /dts-v1/;
16 #include "exynos3250.dtsi"
17 #include <dt-bindings/input/input.h>
18 #include <dt-bindings/gpio/gpio.h>
19
20 / {
21 model = "Samsung Monk board";
22 compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
23
24 aliases {
25 i2c7 = &i2c_max77836;
26 };
27
28 memory {
29 reg = <0x40000000 0x1ff00000>;
30 };
31
32 firmware@0205F000 {
33 compatible = "samsung,secure-firmware";
34 reg = <0x0205F000 0x1000>;
35 };
36
37 gpio_keys {
38 compatible = "gpio-keys";
39
40 power_key {
41 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_POWER>;
43 label = "power key";
44 debounce-interval = <10>;
45 gpio-key,wakeup;
46 };
47 };
48
49 vemmc_reg: voltage-regulator-0 {
50 compatible = "regulator-fixed";
51 regulator-name = "V_EMMC_2.8V-fixed";
52 regulator-min-microvolt = <2800000>;
53 regulator-max-microvolt = <2800000>;
54 gpio = <&gpk0 2 0>;
55 enable-active-high;
56 };
57
58 i2c_max77836: i2c-gpio-0 {
59 compatible = "i2c-gpio";
60 gpios = <&gpd0 2 0>, <&gpd0 3 0>;
61 #address-cells = <1>;
62 #size-cells = <0>;
63
64 max77836: subpmic@25 {
65 compatible = "maxim,max77836";
66 interrupt-parent = <&gpx1>;
67 interrupts = <5 0>;
68 reg = <0x25>;
69 wakeup;
70
71 muic: max77836-muic {
72 compatible = "maxim,max77836-muic";
73 };
74
75 regulators {
76 compatible = "maxim,max77836-regulator";
77 safeout_reg: SAFEOUT {
78 regulator-name = "SAFEOUT";
79 };
80
81 charger_reg: CHARGER {
82 regulator-name = "CHARGER";
83 regulator-min-microamp = <45000>;
84 regulator-max-microamp = <475000>;
85 regulator-boot-on;
86 };
87
88 motor_reg: LDO1 {
89 regulator-name = "MOT_2.7V";
90 regulator-min-microvolt = <1100000>;
91 regulator-max-microvolt = <2700000>;
92 };
93
94 LDO2 {
95 regulator-name = "UNUSED_LDO2";
96 regulator-min-microvolt = <800000>;
97 regulator-max-microvolt = <3950000>;
98 };
99 };
100
101 charger {
102 compatible = "maxim,max77836-charger";
103
104 maxim,constant-uvolt = <4350000>;
105 maxim,fast-charge-uamp = <225000>;
106 maxim,eoc-uamp = <7500>;
107 maxim,ovp-uvolt = <6500000>;
108 };
109 };
110 };
111 };
112
113 &adc {
114 vdd-supply = <&ldo3_reg>;
115 status = "okay";
116 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
117 assigned-clock-rates = <6000000>;
118
119 thermistor-ap {
120 compatible = "ntc,ncp15wb473";
121 pullup-uv = <1800000>;
122 pullup-ohm = <100000>;
123 pulldown-ohm = <100000>;
124 io-channels = <&adc 0>;
125 };
126
127 thermistor-battery {
128 compatible = "ntc,ncp15wb473";
129 pullup-uv = <1800000>;
130 pullup-ohm = <100000>;
131 pulldown-ohm = <100000>;
132 io-channels = <&adc 1>;
133 };
134 };
135
136 &exynos_usbphy {
137 status = "okay";
138 };
139
140 &hsotg {
141 vusb_d-supply = <&ldo15_reg>;
142 vusb_a-supply = <&ldo12_reg>;
143 dr_mode = "peripheral";
144 status = "okay";
145 };
146
147 &i2c_0 {
148 #address-cells = <1>;
149 #size-cells = <0>;
150 samsung,i2c-sda-delay = <100>;
151 samsung,i2c-slave-addr = <0x10>;
152 samsung,i2c-max-bus-freq = <100000>;
153 status = "okay";
154
155 s2mps14_pmic@66 {
156 compatible = "samsung,s2mps14-pmic";
157 interrupt-parent = <&gpx0>;
158 interrupts = <7 0>;
159 reg = <0x66>;
160 wakeup;
161
162 s2mps14_osc: clocks {
163 compatible = "samsung,s2mps14-clk";
164 #clock-cells = <1>;
165 clock-output-names = "s2mps14_ap", "unused",
166 "s2mps14_bt";
167 };
168
169 regulators {
170 ldo1_reg: LDO1 {
171 regulator-name = "VAP_ALIVE_1.0V";
172 regulator-min-microvolt = <1000000>;
173 regulator-max-microvolt = <1000000>;
174 regulator-always-on;
175 };
176
177 ldo2_reg: LDO2 {
178 regulator-name = "VAP_M1_1.2V";
179 regulator-min-microvolt = <1200000>;
180 regulator-max-microvolt = <1200000>;
181 regulator-always-on;
182 };
183
184 ldo3_reg: LDO3 {
185 regulator-name = "VCC_AP_1.8V";
186 regulator-min-microvolt = <1800000>;
187 regulator-max-microvolt = <1800000>;
188 regulator-always-on;
189 };
190
191 ldo4_reg: LDO4 {
192 regulator-name = "VAP_AVDD_PLL1";
193 regulator-min-microvolt = <1800000>;
194 regulator-max-microvolt = <1800000>;
195 regulator-always-on;
196 };
197
198 ldo5_reg: LDO5 {
199 regulator-name = "VAP_PLL_ISO_1.0V";
200 regulator-min-microvolt = <1000000>;
201 regulator-max-microvolt = <1000000>;
202 regulator-always-on;
203 };
204
205 ldo6_reg: LDO6 {
206 regulator-name = "VAP_MIPI_1.0V";
207 regulator-min-microvolt = <1000000>;
208 regulator-max-microvolt = <1000000>;
209 };
210
211 ldo7_reg: LDO7 {
212 regulator-name = "VAP_AVDD_1.8V";
213 regulator-min-microvolt = <1800000>;
214 regulator-max-microvolt = <1800000>;
215 regulator-always-on;
216 };
217
218 ldo8_reg: LDO8 {
219 regulator-name = "VAP_USB_3.0V";
220 regulator-min-microvolt = <3000000>;
221 regulator-max-microvolt = <3000000>;
222 regulator-always-on;
223 };
224
225 ldo9_reg: LDO9 {
226 regulator-name = "V_LPDDR_1.2V";
227 regulator-min-microvolt = <1200000>;
228 regulator-max-microvolt = <1200000>;
229 regulator-always-on;
230 };
231
232 ldo10_reg: LDO10 {
233 regulator-name = "UNUSED_LDO10";
234 regulator-min-microvolt = <1000000>;
235 regulator-max-microvolt = <1000000>;
236 };
237
238 ldo11_reg: LDO11 {
239 regulator-name = "V_EMMC_1.8V";
240 regulator-min-microvolt = <1800000>;
241 regulator-max-microvolt = <1800000>;
242 samsung,ext-control-gpios = <&gpk0 2 0>;
243 };
244
245 ldo12_reg: LDO12 {
246 regulator-name = "V_EMMC_2.8V";
247 regulator-min-microvolt = <2800000>;
248 regulator-max-microvolt = <2800000>;
249 samsung,ext-control-gpios = <&gpk0 2 0>;
250 };
251
252 ldo13_reg: LDO13 {
253 regulator-name = "VSENSOR_2.85V";
254 regulator-min-microvolt = <2850000>;
255 regulator-max-microvolt = <2850000>;
256 regulator-always-on;
257 };
258
259 ldo14_reg: LDO14 {
260 regulator-name = "UNUSED_LDO14";
261 regulator-min-microvolt = <1800000>;
262 regulator-max-microvolt = <1800000>;
263 };
264
265 ldo15_reg: LDO15 {
266 regulator-name = "TSP_AVDD_3.3V";
267 regulator-min-microvolt = <3300000>;
268 regulator-max-microvolt = <3300000>;
269 };
270
271 ldo16_reg: LDO16 {
272 regulator-name = "LCD_VDD_3.3V";
273 regulator-min-microvolt = <3300000>;
274 regulator-max-microvolt = <3300000>;
275 };
276
277 ldo17_reg: LDO17 {
278 regulator-name = "UNUSED_LDO17";
279 regulator-min-microvolt = <1800000>;
280 regulator-max-microvolt = <1800000>;
281 };
282
283 ldo18_reg: LDO18 {
284 regulator-name = "UNUSED_LDO18";
285 regulator-min-microvolt = <1800000>;
286 regulator-max-microvolt = <1800000>;
287 };
288
289 ldo19_reg: LDO19 {
290 regulator-name = "TSP_VDD_1.8V";
291 regulator-min-microvolt = <1800000>;
292 regulator-max-microvolt = <1800000>;
293 };
294
295 ldo20_reg: LDO20 {
296 regulator-name = "LCD_VDD_1.8V";
297 regulator-min-microvolt = <1800000>;
298 regulator-max-microvolt = <1800000>;
299 };
300
301 ldo21_reg: LDO21 {
302 regulator-name = "UNUSED_LDO21";
303 regulator-min-microvolt = <1000000>;
304 regulator-max-microvolt = <1000000>;
305 };
306
307 ldo22_reg: LDO22 {
308 regulator-name = "UNUSED_LDO22";
309 regulator-min-microvolt = <1000000>;
310 regulator-max-microvolt = <1000000>;
311 };
312
313 ldo23_reg: LDO23 {
314 regulator-name = "UNUSED_LDO23";
315 regulator-min-microvolt = <1000000>;
316 regulator-max-microvolt = <1000000>;
317 regulator-always-on;
318 };
319
320 ldo24_reg: LDO24 {
321 regulator-name = "UNUSED_LDO24";
322 regulator-min-microvolt = <1800000>;
323 regulator-max-microvolt = <1800000>;
324 };
325
326 ldo25_reg: LDO25 {
327 regulator-name = "UNUSED_LDO25";
328 regulator-min-microvolt = <1800000>;
329 regulator-max-microvolt = <1800000>;
330 };
331
332 buck1_reg: BUCK1 {
333 regulator-name = "VAP_MIF_1.0V";
334 regulator-min-microvolt = <800000>;
335 regulator-max-microvolt = <900000>;
336 regulator-always-on;
337 };
338
339 buck2_reg: BUCK2 {
340 regulator-name = "VAP_ARM_1.0V";
341 regulator-min-microvolt = <850000>;
342 regulator-max-microvolt = <1150000>;
343 regulator-always-on;
344 };
345
346 buck3_reg: BUCK3 {
347 regulator-name = "VAP_INT3D_1.0V";
348 regulator-min-microvolt = <850000>;
349 regulator-max-microvolt = <1000000>;
350 regulator-always-on;
351 };
352
353 buck4_reg: BUCK4 {
354 regulator-name = "VCC_SUB_1.95V";
355 regulator-min-microvolt = <1950000>;
356 regulator-max-microvolt = <1950000>;
357 regulator-always-on;
358 };
359
360 buck5_reg: BUCK5 {
361 regulator-name = "VCC_SUB_1.35V";
362 regulator-min-microvolt = <1350000>;
363 regulator-max-microvolt = <1350000>;
364 regulator-always-on;
365 };
366 };
367 };
368 };
369
370 &i2c_1 {
371 #address-cells = <1>;
372 #size-cells = <0>;
373 samsung,i2c-sda-delay = <100>;
374 samsung,i2c-slave-addr = <0x10>;
375 samsung,i2c-max-bus-freq = <400000>;
376 status = "okay";
377
378 fuelgauge@36 {
379 compatible = "maxim,max77836-battery";
380 interrupt-parent = <&gpx1>;
381 interrupts = <2 8>;
382 reg = <0x36>;
383 };
384 };
385
386 &i2s2 {
387 status = "okay";
388 };
389
390 &mshc_0 {
391 #address-cells = <1>;
392 #size-cells = <0>;
393 num-slots = <1>;
394 broken-cd;
395 non-removable;
396 cap-mmc-highspeed;
397 desc-num = <4>;
398 mmc-hs200-1_8v;
399 card-detect-delay = <200>;
400 vmmc-supply = <&vemmc_reg>;
401 clock-frequency = <100000000>;
402 clock-freq-min-max = <400000 100000000>;
403 samsung,dw-mshc-ciu-div = <1>;
404 samsung,dw-mshc-sdr-timing = <0 1>;
405 samsung,dw-mshc-ddr-timing = <1 2>;
406 pinctrl-names = "default";
407 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
408 bus-width = <8>;
409 status = "okay";
410 };
411
412 &serial_0 {
413 assigned-clocks = <&cmu CLK_SCLK_UART0>;
414 assigned-clock-rates = <100000000>;
415 status = "okay";
416 };
417
418 &serial_1 {
419 status = "okay";
420 };
421
422 &tmu {
423 vtmu-supply = <&ldo7_reg>;
424 status = "okay";
425 };
426
427 &rtc {
428 clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
429 clock-names = "rtc", "rtc_src";
430 status = "okay";
431 };
432
433 &xusbxti {
434 clock-frequency = <24000000>;
435 };
436
437 &pinctrl_0 {
438 pinctrl-names = "default";
439 pinctrl-0 = <&sleep0>;
440
441 sleep0: sleep-state {
442 PIN_SLP(gpa0-0, INPUT, DOWN);
443 PIN_SLP(gpa0-1, INPUT, DOWN);
444 PIN_SLP(gpa0-2, INPUT, DOWN);
445 PIN_SLP(gpa0-3, INPUT, DOWN);
446 PIN_SLP(gpa0-4, INPUT, DOWN);
447 PIN_SLP(gpa0-5, INPUT, DOWN);
448 PIN_SLP(gpa0-6, INPUT, DOWN);
449 PIN_SLP(gpa0-7, INPUT, DOWN);
450
451 PIN_SLP(gpa1-0, INPUT, DOWN);
452 PIN_SLP(gpa1-1, INPUT, DOWN);
453 PIN_SLP(gpa1-2, INPUT, DOWN);
454 PIN_SLP(gpa1-3, INPUT, DOWN);
455 PIN_SLP(gpa1-4, INPUT, DOWN);
456 PIN_SLP(gpa1-5, INPUT, DOWN);
457
458 PIN_SLP(gpb-0, PREV, NONE);
459 PIN_SLP(gpb-1, PREV, NONE);
460 PIN_SLP(gpb-2, PREV, NONE);
461 PIN_SLP(gpb-3, PREV, NONE);
462 PIN_SLP(gpb-4, INPUT, DOWN);
463 PIN_SLP(gpb-5, INPUT, DOWN);
464 PIN_SLP(gpb-6, INPUT, DOWN);
465 PIN_SLP(gpb-7, INPUT, DOWN);
466
467 PIN_SLP(gpc0-0, INPUT, DOWN);
468 PIN_SLP(gpc0-1, INPUT, DOWN);
469 PIN_SLP(gpc0-2, INPUT, DOWN);
470 PIN_SLP(gpc0-3, INPUT, DOWN);
471 PIN_SLP(gpc0-4, INPUT, DOWN);
472
473 PIN_SLP(gpc1-0, INPUT, DOWN);
474 PIN_SLP(gpc1-1, INPUT, DOWN);
475 PIN_SLP(gpc1-2, INPUT, DOWN);
476 PIN_SLP(gpc1-3, INPUT, DOWN);
477 PIN_SLP(gpc1-4, INPUT, DOWN);
478
479 PIN_SLP(gpd0-0, INPUT, DOWN);
480 PIN_SLP(gpd0-1, INPUT, DOWN);
481 PIN_SLP(gpd0-2, INPUT, NONE);
482 PIN_SLP(gpd0-3, INPUT, NONE);
483
484 PIN_SLP(gpd1-0, INPUT, NONE);
485 PIN_SLP(gpd1-1, INPUT, NONE);
486 PIN_SLP(gpd1-2, INPUT, NONE);
487 PIN_SLP(gpd1-3, INPUT, NONE);
488 };
489 };
490
491 &pinctrl_1 {
492 pinctrl-names = "default";
493 pinctrl-0 = <&sleep1>;
494
495 sleep1: sleep-state {
496 PIN_SLP(gpe0-0, PREV, NONE);
497 PIN_SLP(gpe0-1, PREV, NONE);
498 PIN_SLP(gpe0-2, INPUT, DOWN);
499 PIN_SLP(gpe0-3, INPUT, DOWN);
500 PIN_SLP(gpe0-4, PREV, NONE);
501 PIN_SLP(gpe0-5, INPUT, DOWN);
502 PIN_SLP(gpe0-6, INPUT, DOWN);
503 PIN_SLP(gpe0-7, INPUT, DOWN);
504
505 PIN_SLP(gpe1-0, INPUT, DOWN);
506 PIN_SLP(gpe1-1, PREV, NONE);
507 PIN_SLP(gpe1-2, INPUT, DOWN);
508 PIN_SLP(gpe1-3, INPUT, DOWN);
509 PIN_SLP(gpe1-4, INPUT, DOWN);
510 PIN_SLP(gpe1-5, INPUT, DOWN);
511 PIN_SLP(gpe1-6, INPUT, DOWN);
512 PIN_SLP(gpe1-7, INPUT, NONE);
513
514 PIN_SLP(gpe2-0, INPUT, NONE);
515 PIN_SLP(gpe2-1, INPUT, NONE);
516 PIN_SLP(gpe2-2, INPUT, NONE);
517
518 PIN_SLP(gpk0-0, INPUT, DOWN);
519 PIN_SLP(gpk0-1, INPUT, DOWN);
520 PIN_SLP(gpk0-2, OUT0, NONE);
521 PIN_SLP(gpk0-3, INPUT, DOWN);
522 PIN_SLP(gpk0-4, INPUT, DOWN);
523 PIN_SLP(gpk0-5, INPUT, DOWN);
524 PIN_SLP(gpk0-6, INPUT, DOWN);
525 PIN_SLP(gpk0-7, INPUT, DOWN);
526
527 PIN_SLP(gpk1-0, PREV, NONE);
528 PIN_SLP(gpk1-1, PREV, NONE);
529 PIN_SLP(gpk1-2, INPUT, DOWN);
530 PIN_SLP(gpk1-3, PREV, NONE);
531 PIN_SLP(gpk1-4, PREV, NONE);
532 PIN_SLP(gpk1-5, PREV, NONE);
533 PIN_SLP(gpk1-6, PREV, NONE);
534
535 PIN_SLP(gpk2-0, INPUT, DOWN);
536 PIN_SLP(gpk2-1, INPUT, DOWN);
537 PIN_SLP(gpk2-2, INPUT, DOWN);
538 PIN_SLP(gpk2-3, INPUT, DOWN);
539 PIN_SLP(gpk2-4, INPUT, DOWN);
540 PIN_SLP(gpk2-5, INPUT, DOWN);
541 PIN_SLP(gpk2-6, INPUT, DOWN);
542
543 PIN_SLP(gpl0-0, INPUT, DOWN);
544 PIN_SLP(gpl0-1, INPUT, DOWN);
545 PIN_SLP(gpl0-2, INPUT, DOWN);
546 PIN_SLP(gpl0-3, INPUT, DOWN);
547
548 PIN_SLP(gpm0-0, INPUT, DOWN);
549 PIN_SLP(gpm0-1, INPUT, DOWN);
550 PIN_SLP(gpm0-2, INPUT, DOWN);
551 PIN_SLP(gpm0-3, INPUT, DOWN);
552 PIN_SLP(gpm0-4, INPUT, DOWN);
553 PIN_SLP(gpm0-5, INPUT, DOWN);
554 PIN_SLP(gpm0-6, INPUT, DOWN);
555 PIN_SLP(gpm0-7, INPUT, DOWN);
556
557 PIN_SLP(gpm1-0, INPUT, DOWN);
558 PIN_SLP(gpm1-1, INPUT, DOWN);
559 PIN_SLP(gpm1-2, INPUT, DOWN);
560 PIN_SLP(gpm1-3, INPUT, DOWN);
561 PIN_SLP(gpm1-4, INPUT, DOWN);
562 PIN_SLP(gpm1-5, INPUT, DOWN);
563 PIN_SLP(gpm1-6, INPUT, DOWN);
564
565 PIN_SLP(gpm2-0, INPUT, DOWN);
566 PIN_SLP(gpm2-1, INPUT, DOWN);
567 PIN_SLP(gpm2-2, INPUT, DOWN);
568 PIN_SLP(gpm2-3, INPUT, DOWN);
569 PIN_SLP(gpm2-4, INPUT, DOWN);
570
571 PIN_SLP(gpm3-0, INPUT, DOWN);
572 PIN_SLP(gpm3-1, INPUT, DOWN);
573 PIN_SLP(gpm3-2, INPUT, DOWN);
574 PIN_SLP(gpm3-3, INPUT, DOWN);
575 PIN_SLP(gpm3-4, INPUT, DOWN);
576 PIN_SLP(gpm3-5, INPUT, DOWN);
577 PIN_SLP(gpm3-6, INPUT, DOWN);
578 PIN_SLP(gpm3-7, INPUT, DOWN);
579
580 PIN_SLP(gpm4-0, INPUT, DOWN);
581 PIN_SLP(gpm4-1, INPUT, DOWN);
582 PIN_SLP(gpm4-2, INPUT, DOWN);
583 PIN_SLP(gpm4-3, INPUT, DOWN);
584 PIN_SLP(gpm4-4, INPUT, DOWN);
585 PIN_SLP(gpm4-5, INPUT, DOWN);
586 PIN_SLP(gpm4-6, INPUT, DOWN);
587 PIN_SLP(gpm4-7, INPUT, DOWN);
588 };
589 };
This page took 0.043135 seconds and 5 git commands to generate.