projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
[deliverable/linux.git] / arch / arm / boot / dts / exynos4412-trats2.dts
1 /*
2 * Samsung's Exynos4412 based Trats 2 board device tree source
3 *
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 *
7 * Device tree source file for Samsung's Trats 2 board which is based on
8 * Samsung's Exynos4412 SoC.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15 /dts-v1/;
16 #include "exynos4412.dtsi"
17 #include <dt-bindings/gpio/gpio.h>
18
19 / {
20 model = "Samsung Trats 2 based on Exynos4412";
21 compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
22
23 aliases {
24 i2c9 = &i2c_ak8975;
25 i2c10 = &i2c_cm36651;
26 i2c11 = &i2c_max77693;
27 };
28
29 memory {
30 reg = <0x40000000 0x40000000>;
31 };
32
33 chosen {
34 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
35 };
36
37 firmware@0204F000 {
38 compatible = "samsung,secure-firmware";
39 reg = <0x0204F000 0x1000>;
40 };
41
42 fixed-rate-clocks {
43 xxti {
44 compatible = "samsung,clock-xxti", "fixed-clock";
45 clock-frequency = <0>;
46 };
47
48 xusbxti {
49 compatible = "samsung,clock-xusbxti", "fixed-clock";
50 clock-frequency = <24000000>;
51 };
52 };
53
54 regulators {
55 compatible = "simple-bus";
56 #address-cells = <1>;
57 #size-cells = <0>;
58
59 vemmc_reg: regulator-0 {
60 compatible = "regulator-fixed";
61 regulator-name = "VMEM_VDD_2.8V";
62 regulator-min-microvolt = <2800000>;
63 regulator-max-microvolt = <2800000>;
64 gpio = <&gpk0 2 0>;
65 enable-active-high;
66 };
67
68 cam_io_reg: voltage-regulator-1 {
69 compatible = "regulator-fixed";
70 regulator-name = "CAM_SENSOR_A";
71 regulator-min-microvolt = <2800000>;
72 regulator-max-microvolt = <2800000>;
73 gpio = <&gpm0 2 0>;
74 enable-active-high;
75 };
76
77 lcd_vdd3_reg: voltage-regulator-2 {
78 compatible = "regulator-fixed";
79 regulator-name = "LCD_VDD_2.2V";
80 regulator-min-microvolt = <2200000>;
81 regulator-max-microvolt = <2200000>;
82 gpio = <&gpc0 1 0>;
83 enable-active-high;
84 };
85
86 cam_af_reg: voltage-regulator-3 {
87 compatible = "regulator-fixed";
88 regulator-name = "CAM_AF";
89 regulator-min-microvolt = <2800000>;
90 regulator-max-microvolt = <2800000>;
91 gpio = <&gpm0 4 0>;
92 enable-active-high;
93 };
94
95 cam_isp_core_reg: voltage-regulator-4 {
96 compatible = "regulator-fixed";
97 regulator-name = "CAM_ISP_CORE_1.2V_EN";
98 regulator-min-microvolt = <1200000>;
99 regulator-max-microvolt = <1200000>;
100 gpio = <&gpm0 3 0>;
101 enable-active-high;
102 regulator-always-on;
103 };
104
105 ps_als_reg: voltage-regulator-5 {
106 compatible = "regulator-fixed";
107 regulator-name = "LED_A_3.0V";
108 regulator-min-microvolt = <3000000>;
109 regulator-max-microvolt = <3000000>;
110 gpio = <&gpj0 5 0>;
111 enable-active-high;
112 };
113 };
114
115 gpio-keys {
116 compatible = "gpio-keys";
117
118 key-down {
119 gpios = <&gpx3 3 1>;
120 linux,code = <114>;
121 label = "volume down";
122 debounce-interval = <10>;
123 };
124
125 key-up {
126 gpios = <&gpx2 2 1>;
127 linux,code = <115>;
128 label = "volume up";
129 debounce-interval = <10>;
130 };
131
132 key-power {
133 gpios = <&gpx2 7 1>;
134 linux,code = <116>;
135 label = "power";
136 debounce-interval = <10>;
137 gpio-key,wakeup;
138 };
139
140 key-ok {
141 gpios = <&gpx0 1 1>;
142 linux,code = <139>;
143 label = "ok";
144 debounce-inteval = <10>;
145 gpio-key,wakeup;
146 };
147 };
148
149 adc: adc@126C0000 {
150 vdd-supply = <&ldo3_reg>;
151 status = "okay";
152 };
153
154 i2c@13890000 {
155 samsung,i2c-sda-delay = <100>;
156 samsung,i2c-slave-addr = <0x10>;
157 samsung,i2c-max-bus-freq = <400000>;
158 pinctrl-0 = <&i2c3_bus>;
159 pinctrl-names = "default";
160 status = "okay";
161
162 mms114-touchscreen@48 {
163 compatible = "melfas,mms114";
164 reg = <0x48>;
165 interrupt-parent = <&gpm2>;
166 interrupts = <3 2>;
167 x-size = <720>;
168 y-size = <1280>;
169 avdd-supply = <&ldo23_reg>;
170 vdd-supply = <&ldo24_reg>;
171 };
172 };
173
174 i2c_0: i2c@13860000 {
175 samsung,i2c-sda-delay = <100>;
176 samsung,i2c-slave-addr = <0x10>;
177 samsung,i2c-max-bus-freq = <400000>;
178 pinctrl-0 = <&i2c0_bus>;
179 pinctrl-names = "default";
180 status = "okay";
181
182 s5c73m3@3c {
183 compatible = "samsung,s5c73m3";
184 reg = <0x3c>;
185 standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
186 xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
187 vdd-int-supply = <&buck9_reg>;
188 vddio-cis-supply = <&ldo9_reg>;
189 vdda-supply = <&ldo17_reg>;
190 vddio-host-supply = <&ldo18_reg>;
191 vdd-af-supply = <&cam_af_reg>;
192 vdd-reg-supply = <&cam_io_reg>;
193 clock-frequency = <24000000>;
194 /* CAM_A_CLKOUT */
195 clocks = <&camera 0>;
196 clock-names = "cis_extclk";
197 port {
198 s5c73m3_ep: endpoint {
199 remote-endpoint = <&csis0_ep>;
200 data-lanes = <1 2 3 4>;
201 };
202 };
203 };
204 };
205
206 i2c@138D0000 {
207 samsung,i2c-sda-delay = <100>;
208 samsung,i2c-slave-addr = <0x10>;
209 samsung,i2c-max-bus-freq = <100000>;
210 pinctrl-0 = <&i2c7_bus>;
211 pinctrl-names = "default";
212 status = "okay";
213
214 max77686_pmic@09 {
215 compatible = "maxim,max77686";
216 interrupt-parent = <&gpx0>;
217 interrupts = <7 0>;
218 reg = <0x09>;
219 #clock-cells = <1>;
220
221 voltage-regulators {
222 ldo1_reg: ldo1 {
223 regulator-compatible = "LDO1";
224 regulator-name = "VALIVE_1.0V_AP";
225 regulator-min-microvolt = <1000000>;
226 regulator-max-microvolt = <1000000>;
227 regulator-always-on;
228 regulator-mem-on;
229 };
230
231 ldo2_reg: ldo2 {
232 regulator-compatible = "LDO2";
233 regulator-name = "VM1M2_1.2V_AP";
234 regulator-min-microvolt = <1200000>;
235 regulator-max-microvolt = <1200000>;
236 regulator-always-on;
237 regulator-mem-on;
238 };
239
240 ldo3_reg: ldo3 {
241 regulator-compatible = "LDO3";
242 regulator-name = "VCC_1.8V_AP";
243 regulator-min-microvolt = <1800000>;
244 regulator-max-microvolt = <1800000>;
245 regulator-always-on;
246 regulator-mem-on;
247 };
248
249 ldo4_reg: ldo4 {
250 regulator-compatible = "LDO4";
251 regulator-name = "VCC_2.8V_AP";
252 regulator-min-microvolt = <2800000>;
253 regulator-max-microvolt = <2800000>;
254 regulator-always-on;
255 regulator-mem-on;
256 };
257
258 ldo5_reg: ldo5 {
259 regulator-compatible = "LDO5";
260 regulator-name = "VCC_1.8V_IO";
261 regulator-min-microvolt = <1800000>;
262 regulator-max-microvolt = <1800000>;
263 regulator-always-on;
264 regulator-mem-on;
265 };
266
267 ldo6_reg: ldo6 {
268 regulator-compatible = "LDO6";
269 regulator-name = "VMPLL_1.0V_AP";
270 regulator-min-microvolt = <1000000>;
271 regulator-max-microvolt = <1000000>;
272 regulator-always-on;
273 regulator-mem-on;
274 };
275
276 ldo7_reg: ldo7 {
277 regulator-compatible = "LDO7";
278 regulator-name = "VPLL_1.0V_AP";
279 regulator-min-microvolt = <1000000>;
280 regulator-max-microvolt = <1000000>;
281 regulator-always-on;
282 regulator-mem-on;
283 };
284
285 ldo8_reg: ldo8 {
286 regulator-compatible = "LDO8";
287 regulator-name = "VMIPI_1.0V";
288 regulator-min-microvolt = <1000000>;
289 regulator-max-microvolt = <1000000>;
290 regulator-mem-off;
291 };
292
293 ldo9_reg: ldo9 {
294 regulator-compatible = "LDO9";
295 regulator-name = "CAM_ISP_MIPI_1.2V";
296 regulator-min-microvolt = <1200000>;
297 regulator-max-microvolt = <1200000>;
298 regulator-mem-idle;
299 };
300
301 ldo10_reg: ldo10 {
302 regulator-compatible = "LDO10";
303 regulator-name = "VMIPI_1.8V";
304 regulator-min-microvolt = <1800000>;
305 regulator-max-microvolt = <1800000>;
306 regulator-mem-off;
307 };
308
309 ldo11_reg: ldo11 {
310 regulator-compatible = "LDO11";
311 regulator-name = "VABB1_1.95V";
312 regulator-min-microvolt = <1950000>;
313 regulator-max-microvolt = <1950000>;
314 regulator-always-on;
315 regulator-mem-off;
316 };
317
318 ldo12_reg: ldo12 {
319 regulator-compatible = "LDO12";
320 regulator-name = "VUOTG_3.0V";
321 regulator-min-microvolt = <3000000>;
322 regulator-max-microvolt = <3000000>;
323 regulator-mem-off;
324 };
325
326 ldo13_reg: ldo13 {
327 regulator-compatible = "LDO13";
328 regulator-name = "NFC_AVDD_1.8V";
329 regulator-min-microvolt = <1800000>;
330 regulator-max-microvolt = <1800000>;
331 regulator-mem-idle;
332 };
333
334 ldo14_reg: ldo14 {
335 regulator-compatible = "LDO14";
336 regulator-name = "VABB2_1.95V";
337 regulator-min-microvolt = <1950000>;
338 regulator-max-microvolt = <1950000>;
339 regulator-always-on;
340 regulator-mem-off;
341 };
342
343 ldo15_reg: ldo15 {
344 regulator-compatible = "LDO15";
345 regulator-name = "VHSIC_1.0V";
346 regulator-min-microvolt = <1000000>;
347 regulator-max-microvolt = <1000000>;
348 regulator-mem-off;
349 };
350
351 ldo16_reg: ldo16 {
352 regulator-compatible = "LDO16";
353 regulator-name = "VHSIC_1.8V";
354 regulator-min-microvolt = <1800000>;
355 regulator-max-microvolt = <1800000>;
356 regulator-mem-off;
357 };
358
359 ldo17_reg: ldo17 {
360 regulator-compatible = "LDO17";
361 regulator-name = "CAM_SENSOR_CORE_1.2V";
362 regulator-min-microvolt = <1200000>;
363 regulator-max-microvolt = <1200000>;
364 regulator-mem-idle;
365 };
366
367 ldo18_reg: ldo18 {
368 regulator-compatible = "LDO18";
369 regulator-name = "CAM_ISP_SEN_IO_1.8V";
370 regulator-min-microvolt = <1800000>;
371 regulator-max-microvolt = <1800000>;
372 regulator-mem-idle;
373 };
374
375 ldo19_reg: ldo19 {
376 regulator-compatible = "LDO19";
377 regulator-name = "VT_CAM_1.8V";
378 regulator-min-microvolt = <1800000>;
379 regulator-max-microvolt = <1800000>;
380 regulator-mem-idle;
381 };
382
383 ldo20_reg: ldo20 {
384 regulator-compatible = "LDO20";
385 regulator-name = "VDDQ_PRE_1.8V";
386 regulator-min-microvolt = <1800000>;
387 regulator-max-microvolt = <1800000>;
388 regulator-mem-idle;
389 };
390
391 ldo21_reg: ldo21 {
392 regulator-compatible = "LDO21";
393 regulator-name = "VTF_2.8V";
394 regulator-min-microvolt = <2800000>;
395 regulator-max-microvolt = <2800000>;
396 regulator-mem-idle;
397 };
398
399 ldo22_reg: ldo22 {
400 regulator-compatible = "LDO22";
401 regulator-name = "VMEM_VDD_2.8V";
402 regulator-min-microvolt = <2800000>;
403 regulator-max-microvolt = <2800000>;
404 };
405
406 ldo23_reg: ldo23 {
407 regulator-compatible = "LDO23";
408 regulator-name = "TSP_AVDD_3.3V";
409 regulator-min-microvolt = <3300000>;
410 regulator-max-microvolt = <3300000>;
411 regulator-mem-idle;
412 };
413
414 ldo24_reg: ldo24 {
415 regulator-compatible = "LDO24";
416 regulator-name = "TSP_VDD_1.8V";
417 regulator-min-microvolt = <1800000>;
418 regulator-max-microvolt = <1800000>;
419 regulator-mem-idle;
420 };
421
422 ldo25_reg: ldo25 {
423 regulator-compatible = "LDO25";
424 regulator-name = "LCD_VCC_3.3V";
425 regulator-min-microvolt = <2800000>;
426 regulator-max-microvolt = <2800000>;
427 regulator-mem-idle;
428 };
429
430 ldo26_reg: ldo26 {
431 regulator-compatible = "LDO26";
432 regulator-name = "MOTOR_VCC_3.0V";
433 regulator-min-microvolt = <3000000>;
434 regulator-max-microvolt = <3000000>;
435 regulator-mem-idle;
436 };
437
438 buck1_reg: buck1 {
439 regulator-compatible = "BUCK1";
440 regulator-name = "vdd_mif";
441 regulator-min-microvolt = <850000>;
442 regulator-max-microvolt = <1100000>;
443 regulator-always-on;
444 regulator-boot-on;
445 regulator-mem-off;
446 };
447
448 buck2_reg: buck2 {
449 regulator-compatible = "BUCK2";
450 regulator-name = "vdd_arm";
451 regulator-min-microvolt = <850000>;
452 regulator-max-microvolt = <1500000>;
453 regulator-always-on;
454 regulator-boot-on;
455 regulator-mem-off;
456 };
457
458 buck3_reg: buck3 {
459 regulator-compatible = "BUCK3";
460 regulator-name = "vdd_int";
461 regulator-min-microvolt = <850000>;
462 regulator-max-microvolt = <1150000>;
463 regulator-always-on;
464 regulator-boot-on;
465 regulator-mem-off;
466 };
467
468 buck4_reg: buck4 {
469 regulator-compatible = "BUCK4";
470 regulator-name = "vdd_g3d";
471 regulator-min-microvolt = <850000>;
472 regulator-max-microvolt = <1150000>;
473 regulator-boot-on;
474 regulator-mem-off;
475 };
476
477 buck5_reg: buck5 {
478 regulator-compatible = "BUCK5";
479 regulator-name = "VMEM_1.2V_AP";
480 regulator-min-microvolt = <1200000>;
481 regulator-max-microvolt = <1200000>;
482 regulator-always-on;
483 };
484
485 buck6_reg: buck6 {
486 regulator-compatible = "BUCK6";
487 regulator-name = "VCC_SUB_1.35V";
488 regulator-min-microvolt = <1350000>;
489 regulator-max-microvolt = <1350000>;
490 regulator-always-on;
491 };
492
493 buck7_reg: buck7 {
494 regulator-compatible = "BUCK7";
495 regulator-name = "VCC_SUB_2.0V";
496 regulator-min-microvolt = <2000000>;
497 regulator-max-microvolt = <2000000>;
498 regulator-always-on;
499 };
500
501 buck8_reg: buck8 {
502 regulator-compatible = "BUCK8";
503 regulator-name = "VMEM_VDDF_3.0V";
504 regulator-min-microvolt = <2850000>;
505 regulator-max-microvolt = <2850000>;
506 };
507
508 buck9_reg: buck9 {
509 regulator-compatible = "BUCK9";
510 regulator-name = "CAM_ISP_CORE_1.2V";
511 regulator-min-microvolt = <1000000>;
512 regulator-max-microvolt = <1200000>;
513 regulator-mem-off;
514 };
515 };
516 };
517 };
518
519 i2c_max77693: i2c-gpio-1 {
520 compatible = "i2c-gpio";
521 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
522 i2c-gpio,delay-us = <2>;
523 #address-cells = <1>;
524 #size-cells = <0>;
525 status = "okay";
526
527 max77693@66 {
528 compatible = "maxim,max77693";
529 interrupt-parent = <&gpx1>;
530 interrupts = <5 2>;
531 reg = <0x66>;
532
533 regulators {
534 esafeout1_reg: ESAFEOUT1@1 {
535 regulator-name = "ESAFEOUT1";
536 };
537 esafeout2_reg: ESAFEOUT2@2 {
538 regulator-name = "ESAFEOUT2";
539 };
540 charger_reg: CHARGER@0 {
541 regulator-name = "CHARGER";
542 regulator-min-microamp = <60000>;
543 regulator-max-microamp = <2580000>;
544 };
545 };
546
547 max77693_haptic {
548 compatible = "maxim,max77693-haptic";
549 haptic-supply = <&ldo26_reg>;
550 pwms = <&pwm 0 38022 0>;
551 };
552 };
553 };
554
555 mmc@12550000 {
556 num-slots = <1>;
557 broken-cd;
558 non-removable;
559 card-detect-delay = <200>;
560 vmmc-supply = <&vemmc_reg>;
561 clock-frequency = <400000000>;
562 samsung,dw-mshc-ciu-div = <0>;
563 samsung,dw-mshc-sdr-timing = <2 3>;
564 samsung,dw-mshc-ddr-timing = <1 2>;
565 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
566 pinctrl-names = "default";
567 status = "okay";
568 bus-width = <8>;
569 cap-mmc-highspeed;
570 };
571
572 sdhci@12530000 {
573 bus-width = <4>;
574 cd-gpios = <&gpx3 4 0>;
575 cd-inverted;
576 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
577 pinctrl-names = "default";
578 vmmc-supply = <&ldo21_reg>;
579 status = "okay";
580 };
581
582 serial@13800000 {
583 status = "okay";
584 };
585
586 serial@13810000 {
587 status = "okay";
588 };
589
590 serial@13820000 {
591 status = "okay";
592 };
593
594 serial@13830000 {
595 status = "okay";
596 };
597
598 tmu@100C0000 {
599 vtmu-supply = <&ldo10_reg>;
600 status = "okay";
601 };
602
603 i2c_ak8975: i2c-gpio-0 {
604 compatible = "i2c-gpio";
605 gpios = <&gpy2 4 0>, <&gpy2 5 0>;
606 i2c-gpio,delay-us = <2>;
607 #address-cells = <1>;
608 #size-cells = <0>;
609 status = "okay";
610
611 ak8975@0c {
612 compatible = "asahi-kasei,ak8975";
613 reg = <0x0c>;
614 gpios = <&gpj0 7 0>;
615 };
616 };
617
618 i2c_cm36651: i2c-gpio-2 {
619 compatible = "i2c-gpio";
620 gpios = <&gpf0 0 1>, <&gpf0 1 1>;
621 i2c-gpio,delay-us = <2>;
622 #address-cells = <1>;
623 #size-cells = <0>;
624
625 cm36651@18 {
626 compatible = "capella,cm36651";
627 reg = <0x18>;
628 interrupt-parent = <&gpx0>;
629 interrupts = <2 2>;
630 vled-supply = <&ps_als_reg>;
631 };
632 };
633
634 spi_1: spi@13930000 {
635 pinctrl-names = "default";
636 pinctrl-0 = <&spi1_bus>;
637 cs-gpios = <&gpb 5 0>;
638 status = "okay";
639
640 s5c73m3_spi: s5c73m3 {
641 compatible = "samsung,s5c73m3";
642 spi-max-frequency = <50000000>;
643 reg = <0>;
644 controller-data {
645 samsung,spi-feedback-delay = <2>;
646 };
647 };
648 };
649
650 pwm: pwm@139D0000 {
651 pinctrl-0 = <&pwm0_out>;
652 pinctrl-names = "default";
653 samsung,pwm-outputs = <0>;
654 status = "okay";
655 };
656
657 dsi_0: dsi@11C80000 {
658 vddcore-supply = <&ldo8_reg>;
659 vddio-supply = <&ldo10_reg>;
660 samsung,pll-clock-frequency = <24000000>;
661 status = "okay";
662
663 ports {
664 #address-cells = <1>;
665 #size-cells = <0>;
666
667 port@1 {
668 reg = <1>;
669
670 dsi_out: endpoint {
671 remote-endpoint = <&dsi_in>;
672 samsung,burst-clock-frequency = <500000000>;
673 samsung,esc-clock-frequency = <20000000>;
674 };
675 };
676 };
677
678 panel@0 {
679 compatible = "samsung,s6e8aa0";
680 reg = <0>;
681 vdd3-supply = <&lcd_vdd3_reg>;
682 vci-supply = <&ldo25_reg>;
683 reset-gpios = <&gpy4 5 0>;
684 power-on-delay= <50>;
685 reset-delay = <100>;
686 init-delay = <100>;
687 flip-horizontal;
688 flip-vertical;
689 panel-width-mm = <58>;
690 panel-height-mm = <103>;
691
692 display-timings {
693 timing-0 {
694 clock-frequency = <0>;
695 hactive = <720>;
696 vactive = <1280>;
697 hfront-porch = <5>;
698 hback-porch = <5>;
699 hsync-len = <5>;
700 vfront-porch = <13>;
701 vback-porch = <1>;
702 vsync-len = <2>;
703 };
704 };
705
706 port {
707 dsi_in: endpoint {
708 remote-endpoint = <&dsi_out>;
709 };
710 };
711 };
712 };
713
714 fimd@11c00000 {
715 status = "okay";
716 };
717
718 camera: camera {
719 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
720 pinctrl-names = "default";
721 status = "okay";
722 assigned-clocks = <&clock CLK_MOUT_CAM0>,
723 <&clock CLK_MOUT_CAM1>;
724 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>,
725 <&clock CLK_MOUT_MPLL_USER_T>;
726
727 fimc_0: fimc@11800000 {
728 status = "okay";
729 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
730 <&clock CLK_SCLK_FIMC0>;
731 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
732 assigned-clock-rates = <0>, <176000000>;
733 };
734
735 fimc_1: fimc@11810000 {
736 status = "okay";
737 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
738 <&clock CLK_SCLK_FIMC1>;
739 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
740 assigned-clock-rates = <0>, <176000000>;
741 };
742
743 fimc_2: fimc@11820000 {
744 status = "okay";
745 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
746 <&clock CLK_SCLK_FIMC2>;
747 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
748 assigned-clock-rates = <0>, <176000000>;
749 };
750
751 fimc_3: fimc@11830000 {
752 status = "okay";
753 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
754 <&clock CLK_SCLK_FIMC3>;
755 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
756 assigned-clock-rates = <0>, <176000000>;
757 };
758
759 csis_0: csis@11880000 {
760 status = "okay";
761 vddcore-supply = <&ldo8_reg>;
762 vddio-supply = <&ldo10_reg>;
763 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
764 <&clock CLK_SCLK_CSIS0>;
765 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
766 assigned-clock-rates = <0>, <176000000>;
767
768 /* Camera C (3) MIPI CSI-2 (CSIS0) */
769 port@3 {
770 reg = <3>;
771 csis0_ep: endpoint {
772 remote-endpoint = <&s5c73m3_ep>;
773 data-lanes = <1 2 3 4>;
774 samsung,csis-hs-settle = <12>;
775 };
776 };
777 };
778
779 csis_1: csis@11890000 {
780 status = "okay";
781 vddcore-supply = <&ldo8_reg>;
782 vddio-supply = <&ldo10_reg>;
783 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
784 <&clock CLK_SCLK_CSIS1>;
785 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
786 assigned-clock-rates = <0>, <176000000>;
787
788 /* Camera D (4) MIPI CSI-2 (CSIS1) */
789 port@4 {
790 reg = <4>;
791 csis1_ep: endpoint {
792 remote-endpoint = <&is_s5k6a3_ep>;
793 data-lanes = <1>;
794 samsung,csis-hs-settle = <18>;
795 samsung,csis-wclk;
796 };
797 };
798 };
799
800 fimc_lite_0: fimc-lite@12390000 {
801 status = "okay";
802 };
803
804 fimc_lite_1: fimc-lite@123A0000 {
805 status = "okay";
806 };
807
808 fimc-is@12000000 {
809 pinctrl-0 = <&fimc_is_uart>;
810 pinctrl-names = "default";
811 status = "okay";
812
813 i2c1_isp: i2c-isp@12140000 {
814 pinctrl-0 = <&fimc_is_i2c1>;
815 pinctrl-names = "default";
816
817 s5k6a3@10 {
818 compatible = "samsung,s5k6a3";
819 reg = <0x10>;
820 svdda-supply = <&cam_io_reg>;
821 svddio-supply = <&ldo19_reg>;
822 afvdd-supply = <&ldo19_reg>;
823 clock-frequency = <24000000>;
824 /* CAM_B_CLKOUT */
825 clocks = <&camera 1>;
826 clock-names = "extclk";
827 samsung,camclk-out = <1>;
828 gpios = <&gpm1 6 0>;
829
830 port {
831 is_s5k6a3_ep: endpoint {
832 remote-endpoint = <&csis1_ep>;
833 data-lanes = <1>;
834 };
835 };
836 };
837 };
838 };
839 };
840
841 exynos-usbphy@125B0000 {
842 status = "okay";
843 };
844
845 hsotg@12480000 {
846 vusb_d-supply = <&ldo15_reg>;
847 vusb_a-supply = <&ldo12_reg>;
848 status = "okay";
849 };
850
851 thermistor-ap@0 {
852 compatible = "ntc,ncp15wb473";
853 pullup-uv = <1800000>; /* VCC_1.8V_AP */
854 pullup-ohm = <100000>; /* 100K */
855 pulldown-ohm = <100000>; /* 100K */
856 io-channels = <&adc 1>; /* AP temperature */
857 };
858
859 thermistor-battery@1 {
860 compatible = "ntc,ncp15wb473";
861 pullup-uv = <1800000>; /* VCC_1.8V_AP */
862 pullup-ohm = <100000>; /* 100K */
863 pulldown-ohm = <100000>; /* 100K */
864 io-channels = <&adc 2>; /* Battery temperature */
865 };
866 };
867
868 &pinctrl_0 {
869 pinctrl-names = "default";
870 pinctrl-0 = <&sleep0>;
871
872 sleep0: sleep-states {
873 PIN_SLP(gpa0-0, INPUT, NONE);
874 PIN_SLP(gpa0-1, OUT0, NONE);
875 PIN_SLP(gpa0-2, INPUT, NONE);
876 PIN_SLP(gpa0-3, INPUT, UP);
877 PIN_SLP(gpa0-4, INPUT, NONE);
878 PIN_SLP(gpa0-5, INPUT, DOWN);
879 PIN_SLP(gpa0-6, INPUT, DOWN);
880 PIN_SLP(gpa0-7, INPUT, UP);
881
882 PIN_SLP(gpa1-0, INPUT, DOWN);
883 PIN_SLP(gpa1-1, INPUT, DOWN);
884 PIN_SLP(gpa1-2, INPUT, DOWN);
885 PIN_SLP(gpa1-3, INPUT, DOWN);
886 PIN_SLP(gpa1-4, INPUT, DOWN);
887 PIN_SLP(gpa1-5, INPUT, DOWN);
888
889 PIN_SLP(gpb-0, INPUT, NONE);
890 PIN_SLP(gpb-1, INPUT, NONE);
891 PIN_SLP(gpb-2, INPUT, NONE);
892 PIN_SLP(gpb-3, INPUT, NONE);
893 PIN_SLP(gpb-4, INPUT, DOWN);
894 PIN_SLP(gpb-5, INPUT, UP);
895 PIN_SLP(gpb-6, INPUT, DOWN);
896 PIN_SLP(gpb-7, INPUT, DOWN);
897
898 PIN_SLP(gpc0-0, INPUT, DOWN);
899 PIN_SLP(gpc0-1, INPUT, DOWN);
900 PIN_SLP(gpc0-2, INPUT, DOWN);
901 PIN_SLP(gpc0-3, INPUT, DOWN);
902 PIN_SLP(gpc0-4, INPUT, DOWN);
903
904 PIN_SLP(gpc1-0, INPUT, NONE);
905 PIN_SLP(gpc1-1, PREV, NONE);
906 PIN_SLP(gpc1-2, INPUT, NONE);
907 PIN_SLP(gpc1-3, INPUT, NONE);
908 PIN_SLP(gpc1-4, INPUT, NONE);
909
910 PIN_SLP(gpd0-0, INPUT, DOWN);
911 PIN_SLP(gpd0-1, INPUT, DOWN);
912 PIN_SLP(gpd0-2, INPUT, NONE);
913 PIN_SLP(gpd0-3, INPUT, NONE);
914
915 PIN_SLP(gpd1-0, INPUT, DOWN);
916 PIN_SLP(gpd1-1, INPUT, DOWN);
917 PIN_SLP(gpd1-2, INPUT, NONE);
918 PIN_SLP(gpd1-3, INPUT, NONE);
919
920 PIN_SLP(gpf0-0, INPUT, NONE);
921 PIN_SLP(gpf0-1, INPUT, NONE);
922 PIN_SLP(gpf0-2, INPUT, DOWN);
923 PIN_SLP(gpf0-3, INPUT, DOWN);
924 PIN_SLP(gpf0-4, INPUT, NONE);
925 PIN_SLP(gpf0-5, INPUT, DOWN);
926 PIN_SLP(gpf0-6, INPUT, NONE);
927 PIN_SLP(gpf0-7, INPUT, DOWN);
928
929 PIN_SLP(gpf1-0, INPUT, DOWN);
930 PIN_SLP(gpf1-1, INPUT, DOWN);
931 PIN_SLP(gpf1-2, INPUT, DOWN);
932 PIN_SLP(gpf1-3, INPUT, DOWN);
933 PIN_SLP(gpf1-4, INPUT, NONE);
934 PIN_SLP(gpf1-5, INPUT, NONE);
935 PIN_SLP(gpf1-6, INPUT, DOWN);
936 PIN_SLP(gpf1-7, PREV, NONE);
937
938 PIN_SLP(gpf2-0, PREV, NONE);
939 PIN_SLP(gpf2-1, INPUT, DOWN);
940 PIN_SLP(gpf2-2, INPUT, DOWN);
941 PIN_SLP(gpf2-3, INPUT, DOWN);
942 PIN_SLP(gpf2-4, INPUT, DOWN);
943 PIN_SLP(gpf2-5, INPUT, DOWN);
944 PIN_SLP(gpf2-6, INPUT, NONE);
945 PIN_SLP(gpf2-7, INPUT, NONE);
946
947 PIN_SLP(gpf3-0, INPUT, NONE);
948 PIN_SLP(gpf3-1, PREV, NONE);
949 PIN_SLP(gpf3-2, PREV, NONE);
950 PIN_SLP(gpf3-3, PREV, NONE);
951 PIN_SLP(gpf3-4, OUT1, NONE);
952 PIN_SLP(gpf3-5, INPUT, DOWN);
953
954 PIN_SLP(gpj0-0, PREV, NONE);
955 PIN_SLP(gpj0-1, PREV, NONE);
956 PIN_SLP(gpj0-2, PREV, NONE);
957 PIN_SLP(gpj0-3, INPUT, DOWN);
958 PIN_SLP(gpj0-4, PREV, NONE);
959 PIN_SLP(gpj0-5, PREV, NONE);
960 PIN_SLP(gpj0-6, INPUT, DOWN);
961 PIN_SLP(gpj0-7, INPUT, DOWN);
962
963 PIN_SLP(gpj1-0, INPUT, DOWN);
964 PIN_SLP(gpj1-1, PREV, NONE);
965 PIN_SLP(gpj1-2, PREV, NONE);
966 PIN_SLP(gpj1-3, INPUT, DOWN);
967 PIN_SLP(gpj1-4, INPUT, DOWN);
968 };
969 };
970
971 &pinctrl_1 {
972 pinctrl-names = "default";
973 pinctrl-0 = <&sleep1>;
974
975 sleep1: sleep-states {
976 PIN_SLP(gpk0-0, PREV, NONE);
977 PIN_SLP(gpk0-1, PREV, NONE);
978 PIN_SLP(gpk0-2, OUT0, NONE);
979 PIN_SLP(gpk0-3, PREV, NONE);
980 PIN_SLP(gpk0-4, PREV, NONE);
981 PIN_SLP(gpk0-5, PREV, NONE);
982 PIN_SLP(gpk0-6, PREV, NONE);
983
984 PIN_SLP(gpk1-0, INPUT, DOWN);
985 PIN_SLP(gpk1-1, INPUT, DOWN);
986 PIN_SLP(gpk1-2, INPUT, DOWN);
987 PIN_SLP(gpk1-3, PREV, NONE);
988 PIN_SLP(gpk1-4, PREV, NONE);
989 PIN_SLP(gpk1-5, PREV, NONE);
990 PIN_SLP(gpk1-6, PREV, NONE);
991
992 PIN_SLP(gpk2-0, INPUT, DOWN);
993 PIN_SLP(gpk2-1, INPUT, DOWN);
994 PIN_SLP(gpk2-2, INPUT, DOWN);
995 PIN_SLP(gpk2-3, INPUT, DOWN);
996 PIN_SLP(gpk2-4, INPUT, DOWN);
997 PIN_SLP(gpk2-5, INPUT, DOWN);
998 PIN_SLP(gpk2-6, INPUT, DOWN);
999
1000 PIN_SLP(gpk3-0, OUT0, NONE);
1001 PIN_SLP(gpk3-1, INPUT, NONE);
1002 PIN_SLP(gpk3-2, INPUT, DOWN);
1003 PIN_SLP(gpk3-3, INPUT, NONE);
1004 PIN_SLP(gpk3-4, INPUT, NONE);
1005 PIN_SLP(gpk3-5, INPUT, NONE);
1006 PIN_SLP(gpk3-6, INPUT, NONE);
1007
1008 PIN_SLP(gpl0-0, INPUT, DOWN);
1009 PIN_SLP(gpl0-1, INPUT, DOWN);
1010 PIN_SLP(gpl0-2, INPUT, DOWN);
1011 PIN_SLP(gpl0-3, INPUT, DOWN);
1012 PIN_SLP(gpl0-4, PREV, NONE);
1013 PIN_SLP(gpl0-6, PREV, NONE);
1014
1015 PIN_SLP(gpl1-0, INPUT, DOWN);
1016 PIN_SLP(gpl1-1, INPUT, DOWN);
1017 PIN_SLP(gpl2-0, INPUT, DOWN);
1018 PIN_SLP(gpl2-1, INPUT, DOWN);
1019 PIN_SLP(gpl2-2, INPUT, DOWN);
1020 PIN_SLP(gpl2-3, INPUT, DOWN);
1021 PIN_SLP(gpl2-4, INPUT, DOWN);
1022 PIN_SLP(gpl2-5, INPUT, DOWN);
1023 PIN_SLP(gpl2-6, PREV, NONE);
1024 PIN_SLP(gpl2-7, INPUT, DOWN);
1025
1026 PIN_SLP(gpm0-0, INPUT, DOWN);
1027 PIN_SLP(gpm0-1, INPUT, DOWN);
1028 PIN_SLP(gpm0-2, INPUT, DOWN);
1029 PIN_SLP(gpm0-3, INPUT, DOWN);
1030 PIN_SLP(gpm0-4, INPUT, DOWN);
1031 PIN_SLP(gpm0-5, INPUT, DOWN);
1032 PIN_SLP(gpm0-6, INPUT, DOWN);
1033 PIN_SLP(gpm0-7, INPUT, DOWN);
1034
1035 PIN_SLP(gpm1-0, INPUT, DOWN);
1036 PIN_SLP(gpm1-1, INPUT, DOWN);
1037 PIN_SLP(gpm1-2, INPUT, NONE);
1038 PIN_SLP(gpm1-3, INPUT, NONE);
1039 PIN_SLP(gpm1-4, INPUT, NONE);
1040 PIN_SLP(gpm1-5, INPUT, NONE);
1041 PIN_SLP(gpm1-6, INPUT, DOWN);
1042
1043 PIN_SLP(gpm2-0, INPUT, NONE);
1044 PIN_SLP(gpm2-1, INPUT, NONE);
1045 PIN_SLP(gpm2-2, INPUT, DOWN);
1046 PIN_SLP(gpm2-3, INPUT, DOWN);
1047 PIN_SLP(gpm2-4, INPUT, DOWN);
1048
1049 PIN_SLP(gpm3-0, PREV, NONE);
1050 PIN_SLP(gpm3-1, PREV, NONE);
1051 PIN_SLP(gpm3-2, PREV, NONE);
1052 PIN_SLP(gpm3-3, OUT1, NONE);
1053 PIN_SLP(gpm3-4, INPUT, DOWN);
1054 PIN_SLP(gpm3-5, INPUT, DOWN);
1055 PIN_SLP(gpm3-6, INPUT, DOWN);
1056 PIN_SLP(gpm3-7, INPUT, DOWN);
1057
1058 PIN_SLP(gpm4-0, INPUT, DOWN);
1059 PIN_SLP(gpm4-1, INPUT, DOWN);
1060 PIN_SLP(gpm4-2, INPUT, DOWN);
1061 PIN_SLP(gpm4-3, INPUT, DOWN);
1062 PIN_SLP(gpm4-4, INPUT, DOWN);
1063 PIN_SLP(gpm4-5, INPUT, DOWN);
1064 PIN_SLP(gpm4-6, INPUT, DOWN);
1065 PIN_SLP(gpm4-7, INPUT, DOWN);
1066
1067 PIN_SLP(gpy0-0, INPUT, DOWN);
1068 PIN_SLP(gpy0-1, INPUT, DOWN);
1069 PIN_SLP(gpy0-2, INPUT, DOWN);
1070 PIN_SLP(gpy0-3, INPUT, DOWN);
1071 PIN_SLP(gpy0-4, INPUT, DOWN);
1072 PIN_SLP(gpy0-5, INPUT, DOWN);
1073
1074 PIN_SLP(gpy1-0, INPUT, DOWN);
1075 PIN_SLP(gpy1-1, INPUT, DOWN);
1076 PIN_SLP(gpy1-2, INPUT, DOWN);
1077 PIN_SLP(gpy1-3, INPUT, DOWN);
1078
1079 PIN_SLP(gpy2-0, PREV, NONE);
1080 PIN_SLP(gpy2-1, INPUT, DOWN);
1081 PIN_SLP(gpy2-2, INPUT, NONE);
1082 PIN_SLP(gpy2-3, INPUT, NONE);
1083 PIN_SLP(gpy2-4, INPUT, NONE);
1084 PIN_SLP(gpy2-5, INPUT, NONE);
1085
1086 PIN_SLP(gpy3-0, INPUT, DOWN);
1087 PIN_SLP(gpy3-1, INPUT, DOWN);
1088 PIN_SLP(gpy3-2, INPUT, DOWN);
1089 PIN_SLP(gpy3-3, INPUT, DOWN);
1090 PIN_SLP(gpy3-4, INPUT, DOWN);
1091 PIN_SLP(gpy3-5, INPUT, DOWN);
1092 PIN_SLP(gpy3-6, INPUT, DOWN);
1093 PIN_SLP(gpy3-7, INPUT, DOWN);
1094
1095 PIN_SLP(gpy4-0, INPUT, DOWN);
1096 PIN_SLP(gpy4-1, INPUT, DOWN);
1097 PIN_SLP(gpy4-2, INPUT, DOWN);
1098 PIN_SLP(gpy4-3, INPUT, DOWN);
1099 PIN_SLP(gpy4-4, INPUT, DOWN);
1100 PIN_SLP(gpy4-5, INPUT, DOWN);
1101 PIN_SLP(gpy4-6, INPUT, DOWN);
1102 PIN_SLP(gpy4-7, INPUT, DOWN);
1103
1104 PIN_SLP(gpy5-0, INPUT, DOWN);
1105 PIN_SLP(gpy5-1, INPUT, DOWN);
1106 PIN_SLP(gpy5-2, INPUT, DOWN);
1107 PIN_SLP(gpy5-3, INPUT, DOWN);
1108 PIN_SLP(gpy5-4, INPUT, DOWN);
1109 PIN_SLP(gpy5-5, INPUT, DOWN);
1110 PIN_SLP(gpy5-6, INPUT, DOWN);
1111 PIN_SLP(gpy5-7, INPUT, DOWN);
1112
1113 PIN_SLP(gpy6-0, INPUT, DOWN);
1114 PIN_SLP(gpy6-1, INPUT, DOWN);
1115 PIN_SLP(gpy6-2, INPUT, DOWN);
1116 PIN_SLP(gpy6-3, INPUT, DOWN);
1117 PIN_SLP(gpy6-4, INPUT, DOWN);
1118 PIN_SLP(gpy6-5, INPUT, DOWN);
1119 PIN_SLP(gpy6-6, INPUT, DOWN);
1120 PIN_SLP(gpy6-7, INPUT, DOWN);
1121 };
1122 };
1123
1124 &pinctrl_2 {
1125 pinctrl-names = "default";
1126 pinctrl-0 = <&sleep2>;
1127
1128 sleep2: sleep-states {
1129 PIN_SLP(gpz-0, INPUT, DOWN);
1130 PIN_SLP(gpz-1, INPUT, DOWN);
1131 PIN_SLP(gpz-2, INPUT, DOWN);
1132 PIN_SLP(gpz-3, INPUT, DOWN);
1133 PIN_SLP(gpz-4, INPUT, DOWN);
1134 PIN_SLP(gpz-5, INPUT, DOWN);
1135 PIN_SLP(gpz-6, INPUT, DOWN);
1136 };
1137 };
1138
1139 &pinctrl_3 {
1140 pinctrl-names = "default";
1141 pinctrl-0 = <&sleep3>;
1142
1143 sleep3: sleep-states {
1144 PIN_SLP(gpv0-0, INPUT, DOWN);
1145 PIN_SLP(gpv0-1, INPUT, DOWN);
1146 PIN_SLP(gpv0-2, INPUT, DOWN);
1147 PIN_SLP(gpv0-3, INPUT, DOWN);
1148 PIN_SLP(gpv0-4, INPUT, DOWN);
1149 PIN_SLP(gpv0-5, INPUT, DOWN);
1150 PIN_SLP(gpv0-6, INPUT, DOWN);
1151 PIN_SLP(gpv0-7, INPUT, DOWN);
1152
1153 PIN_SLP(gpv1-0, INPUT, DOWN);
1154 PIN_SLP(gpv1-1, INPUT, DOWN);
1155 PIN_SLP(gpv1-2, INPUT, DOWN);
1156 PIN_SLP(gpv1-3, INPUT, DOWN);
1157 PIN_SLP(gpv1-4, INPUT, DOWN);
1158 PIN_SLP(gpv1-5, INPUT, DOWN);
1159 PIN_SLP(gpv1-6, INPUT, DOWN);
1160 PIN_SLP(gpv1-7, INPUT, DOWN);
1161
1162 PIN_SLP(gpv2-0, INPUT, DOWN);
1163 PIN_SLP(gpv2-1, INPUT, DOWN);
1164 PIN_SLP(gpv2-2, INPUT, DOWN);
1165 PIN_SLP(gpv2-3, INPUT, DOWN);
1166 PIN_SLP(gpv2-4, INPUT, DOWN);
1167 PIN_SLP(gpv2-5, INPUT, DOWN);
1168 PIN_SLP(gpv2-6, INPUT, DOWN);
1169 PIN_SLP(gpv2-7, INPUT, DOWN);
1170
1171 PIN_SLP(gpv3-0, INPUT, DOWN);
1172 PIN_SLP(gpv3-1, INPUT, DOWN);
1173 PIN_SLP(gpv3-2, INPUT, DOWN);
1174 PIN_SLP(gpv3-3, INPUT, DOWN);
1175 PIN_SLP(gpv3-4, INPUT, DOWN);
1176 PIN_SLP(gpv3-5, INPUT, DOWN);
1177 PIN_SLP(gpv3-6, INPUT, DOWN);
1178 PIN_SLP(gpv3-7, INPUT, DOWN);
1179
1180 PIN_SLP(gpv4-0, INPUT, DOWN);
1181 };
1182 };
Linux kernel - Deliverables
This page took 0.072388 seconds and 6 git commands to generate.