Merge git://git.infradead.org/intel-iommu
[deliverable/linux.git] / arch / arm / boot / dts / exynos5250-arndale.dts
1 /*
2 * Samsung's Exynos5250 based Arndale board device tree source
3 *
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12 /dts-v1/;
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/interrupt-controller/irq.h>
15 #include <dt-bindings/input/input.h>
16 #include "exynos5250.dtsi"
17
18 / {
19 model = "Insignal Arndale evaluation board based on EXYNOS5250";
20 compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
21
22 memory {
23 reg = <0x40000000 0x80000000>;
24 };
25
26 chosen {
27 bootargs = "console=ttySAC2,115200";
28 };
29
30 gpio_keys {
31 compatible = "gpio-keys";
32
33 menu {
34 label = "SW-TACT2";
35 gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
36 linux,code = <KEY_MENU>;
37 wakeup-source;
38 };
39
40 home {
41 label = "SW-TACT3";
42 gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_HOME>;
44 wakeup-source;
45 };
46
47 up {
48 label = "SW-TACT4";
49 gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_UP>;
51 wakeup-source;
52 };
53
54 down {
55 label = "SW-TACT5";
56 gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_DOWN>;
58 wakeup-source;
59 };
60
61 back {
62 label = "SW-TACT6";
63 gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_BACK>;
65 wakeup-source;
66 };
67
68 wakeup {
69 label = "SW-TACT7";
70 gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
71 linux,code = <KEY_WAKEUP>;
72 wakeup-source;
73 };
74 };
75
76 regulators {
77 compatible = "simple-bus";
78 #address-cells = <1>;
79 #size-cells = <0>;
80
81 main_dc_reg: regulator@0 {
82 compatible = "regulator-fixed";
83 reg = <0>;
84 regulator-name = "MAIN_DC";
85 };
86
87 mmc_reg: regulator@1 {
88 compatible = "regulator-fixed";
89 reg = <1>;
90 regulator-name = "VDD_33ON_2.8V";
91 regulator-min-microvolt = <2800000>;
92 regulator-max-microvolt = <2800000>;
93 gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
94 enable-active-high;
95 };
96
97 reg_hdmi_en: regulator@2 {
98 compatible = "regulator-fixed";
99 reg = <2>;
100 regulator-name = "hdmi-en";
101 };
102 };
103
104 fixed-rate-clocks {
105 xxti {
106 compatible = "samsung,clock-xxti";
107 clock-frequency = <24000000>;
108 };
109 };
110
111 // SMSC USB3503 connected in hardware only mode as a PHY
112 usb_hub: usb-hub {
113 compatible = "smsc,usb3503a";
114
115 reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
116 connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
117 };
118 };
119
120 &cpu0 {
121 cpu0-supply = <&buck2_reg>;
122 };
123
124 &dp {
125 status = "okay";
126 samsung,color-space = <0>;
127 samsung,color-depth = <1>;
128 samsung,link-rate = <0x0a>;
129 samsung,lane-count = <4>;
130
131 display-timings {
132 native-mode = <&timing0>;
133
134 timing0: timing {
135 /* 2560x1600 DP panel */
136 clock-frequency = <50000>;
137 hactive = <2560>;
138 vactive = <1600>;
139 hfront-porch = <48>;
140 hback-porch = <80>;
141 hsync-len = <32>;
142 vback-porch = <16>;
143 vfront-porch = <8>;
144 vsync-len = <6>;
145 };
146 };
147 };
148
149 &fimd {
150 status = "okay";
151 };
152
153 &hdmi {
154 hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
155 vdd_osc-supply = <&ldo10_reg>;
156 vdd_pll-supply = <&ldo8_reg>;
157 vdd-supply = <&ldo8_reg>;
158 };
159
160 &i2c_0 {
161 status = "okay";
162 samsung,i2c-sda-delay = <100>;
163 samsung,i2c-max-bus-freq = <20000>;
164 samsung,i2c-slave-addr = <0x66>;
165
166 s5m8767_pmic@66 {
167 compatible = "samsung,s5m8767-pmic";
168 reg = <0x66>;
169 interrupt-parent = <&gpx3>;
170 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
171
172 vinb1-supply = <&main_dc_reg>;
173 vinb2-supply = <&main_dc_reg>;
174 vinb3-supply = <&main_dc_reg>;
175 vinb4-supply = <&main_dc_reg>;
176 vinb5-supply = <&main_dc_reg>;
177 vinb6-supply = <&main_dc_reg>;
178 vinb7-supply = <&main_dc_reg>;
179 vinb8-supply = <&main_dc_reg>;
180 vinb9-supply = <&main_dc_reg>;
181
182 vinl1-supply = <&buck7_reg>;
183 vinl2-supply = <&buck7_reg>;
184 vinl3-supply = <&buck7_reg>;
185 vinl4-supply = <&main_dc_reg>;
186 vinl5-supply = <&main_dc_reg>;
187 vinl6-supply = <&main_dc_reg>;
188 vinl7-supply = <&main_dc_reg>;
189 vinl8-supply = <&buck8_reg>;
190 vinl9-supply = <&buck8_reg>;
191
192 s5m8767,pmic-buck2-dvs-voltage = <1300000>;
193 s5m8767,pmic-buck3-dvs-voltage = <1100000>;
194 s5m8767,pmic-buck4-dvs-voltage = <1200000>;
195 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
196 <&gpd1 1 GPIO_ACTIVE_HIGH>,
197 <&gpd1 2 GPIO_ACTIVE_HIGH>;
198 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
199 <&gpx2 4 GPIO_ACTIVE_HIGH>,
200 <&gpx2 5 GPIO_ACTIVE_HIGH>;
201
202 regulators {
203 ldo1_reg: LDO1 {
204 regulator-name = "VDD_ALIVE_1.0V";
205 regulator-min-microvolt = <1100000>;
206 regulator-max-microvolt = <1100000>;
207 regulator-always-on;
208 regulator-boot-on;
209 op_mode = <1>;
210 };
211
212 ldo2_reg: LDO2 {
213 regulator-name = "VDD_28IO_DP_1.35V";
214 regulator-min-microvolt = <1200000>;
215 regulator-max-microvolt = <1200000>;
216 regulator-always-on;
217 regulator-boot-on;
218 op_mode = <1>;
219 };
220
221 ldo3_reg: LDO3 {
222 regulator-name = "VDD_COMMON1_1.8V";
223 regulator-min-microvolt = <1800000>;
224 regulator-max-microvolt = <1800000>;
225 regulator-always-on;
226 regulator-boot-on;
227 op_mode = <1>;
228 };
229
230 ldo4_reg: LDO4 {
231 regulator-name = "VDD_IOPERI_1.8V";
232 regulator-min-microvolt = <1800000>;
233 regulator-max-microvolt = <1800000>;
234 regulator-always-on;
235 op_mode = <1>;
236 };
237
238 ldo5_reg: LDO5 {
239 regulator-name = "VDD_EXT_1.8V";
240 regulator-min-microvolt = <1800000>;
241 regulator-max-microvolt = <1800000>;
242 regulator-always-on;
243 regulator-boot-on;
244 op_mode = <1>;
245 };
246
247 ldo6_reg: LDO6 {
248 regulator-name = "VDD_MPLL_1.1V";
249 regulator-min-microvolt = <1100000>;
250 regulator-max-microvolt = <1100000>;
251 regulator-always-on;
252 regulator-boot-on;
253 op_mode = <1>;
254 };
255
256 ldo7_reg: LDO7 {
257 regulator-name = "VDD_XPLL_1.1V";
258 regulator-min-microvolt = <1100000>;
259 regulator-max-microvolt = <1100000>;
260 regulator-always-on;
261 regulator-boot-on;
262 op_mode = <1>;
263 };
264
265 ldo8_reg: LDO8 {
266 regulator-name = "VDD_COMMON2_1.0V";
267 regulator-min-microvolt = <1000000>;
268 regulator-max-microvolt = <1000000>;
269 regulator-always-on;
270 regulator-boot-on;
271 op_mode = <1>;
272 };
273
274 ldo9_reg: LDO9 {
275 regulator-name = "VDD_33ON_3.0V";
276 regulator-min-microvolt = <3000000>;
277 regulator-max-microvolt = <3000000>;
278 op_mode = <1>;
279 };
280
281 ldo10_reg: LDO10 {
282 regulator-name = "VDD_COMMON3_1.8V";
283 regulator-min-microvolt = <1800000>;
284 regulator-max-microvolt = <1800000>;
285 regulator-always-on;
286 regulator-boot-on;
287 op_mode = <1>;
288 };
289
290 ldo11_reg: LDO11 {
291 regulator-name = "VDD_ABB2_1.8V";
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <1800000>;
294 regulator-always-on;
295 regulator-boot-on;
296 op_mode = <1>;
297 };
298
299 ldo12_reg: LDO12 {
300 regulator-name = "VDD_USB_3.0V";
301 regulator-min-microvolt = <3000000>;
302 regulator-max-microvolt = <3000000>;
303 regulator-always-on;
304 regulator-boot-on;
305 op_mode = <1>;
306 };
307
308 ldo13_reg: LDO13 {
309 regulator-name = "VDDQ_C2C_W_1.8V";
310 regulator-min-microvolt = <1800000>;
311 regulator-max-microvolt = <1800000>;
312 regulator-always-on;
313 regulator-boot-on;
314 op_mode = <1>;
315 };
316
317 ldo14_reg: LDO14 {
318 regulator-name = "VDD18_ABB0_3_1.8V";
319 regulator-min-microvolt = <1800000>;
320 regulator-max-microvolt = <1800000>;
321 regulator-always-on;
322 regulator-boot-on;
323 op_mode = <1>;
324 };
325
326 ldo15_reg: LDO15 {
327 regulator-name = "VDD10_COMMON4_1.0V";
328 regulator-min-microvolt = <1000000>;
329 regulator-max-microvolt = <1000000>;
330 regulator-always-on;
331 regulator-boot-on;
332 op_mode = <1>;
333 };
334
335 ldo16_reg: LDO16 {
336 regulator-name = "VDD18_HSIC_1.8V";
337 regulator-min-microvolt = <1800000>;
338 regulator-max-microvolt = <1800000>;
339 regulator-always-on;
340 regulator-boot-on;
341 op_mode = <1>;
342 };
343
344 ldo17_reg: LDO17 {
345 regulator-name = "VDDQ_MMC2_3_2.8V";
346 regulator-min-microvolt = <2800000>;
347 regulator-max-microvolt = <2800000>;
348 regulator-always-on;
349 regulator-boot-on;
350 op_mode = <1>;
351 };
352
353 ldo18_reg: LDO18 {
354 regulator-name = "VDD_33ON_2.8V";
355 regulator-min-microvolt = <2800000>;
356 regulator-max-microvolt = <2800000>;
357 op_mode = <1>;
358 };
359
360 ldo22_reg: LDO22 {
361 regulator-name = "EXT_33_OFF";
362 regulator-min-microvolt = <3300000>;
363 regulator-max-microvolt = <3300000>;
364 op_mode = <1>;
365 };
366
367 ldo23_reg: LDO23 {
368 regulator-name = "EXT_28_OFF";
369 regulator-min-microvolt = <2800000>;
370 regulator-max-microvolt = <2800000>;
371 op_mode = <1>;
372 };
373
374 ldo25_reg: LDO25 {
375 regulator-name = "PVDD_LDO25";
376 regulator-min-microvolt = <1200000>;
377 regulator-max-microvolt = <1200000>;
378 op_mode = <1>;
379 };
380
381 ldo26_reg: LDO26 {
382 regulator-name = "EXT_18_OFF";
383 regulator-min-microvolt = <1800000>;
384 regulator-max-microvolt = <1800000>;
385 op_mode = <1>;
386 };
387
388 buck1_reg: BUCK1 {
389 regulator-name = "vdd_mif";
390 regulator-min-microvolt = <950000>;
391 regulator-max-microvolt = <1200000>;
392 regulator-always-on;
393 regulator-boot-on;
394 op_mode = <1>;
395 };
396
397 buck2_reg: BUCK2 {
398 regulator-name = "vdd_arm";
399 regulator-min-microvolt = <912500>;
400 regulator-max-microvolt = <1300000>;
401 regulator-always-on;
402 regulator-boot-on;
403 op_mode = <1>;
404 };
405
406 buck3_reg: BUCK3 {
407 regulator-name = "vdd_int";
408 regulator-min-microvolt = <900000>;
409 regulator-max-microvolt = <1200000>;
410 regulator-always-on;
411 regulator-boot-on;
412 op_mode = <1>;
413 };
414
415 buck4_reg: BUCK4 {
416 regulator-name = "vdd_g3d";
417 regulator-min-microvolt = <1000000>;
418 regulator-max-microvolt = <1000000>;
419 regulator-always-on;
420 regulator-boot-on;
421 op_mode = <1>;
422 };
423
424 buck5_reg: BUCK5 {
425 regulator-name = "VDD_MEM_1.35V";
426 regulator-min-microvolt = <750000>;
427 regulator-max-microvolt = <1355000>;
428 regulator-always-on;
429 regulator-boot-on;
430 op_mode = <1>;
431 };
432
433 buck7_reg: BUCK7 {
434 regulator-name = "PVDD_BUCK7";
435 regulator-always-on;
436 op_mode = <1>;
437 };
438
439 buck8_reg: BUCK8 {
440 regulator-name = "PVDD_BUCK8";
441 regulator-always-on;
442 op_mode = <1>;
443 };
444
445 buck9_reg: BUCK9 {
446 regulator-name = "VDD_33_OFF_EXT1";
447 regulator-min-microvolt = <750000>;
448 regulator-max-microvolt = <3000000>;
449 op_mode = <1>;
450 };
451 };
452 };
453 };
454
455 &i2c_2 {
456 status = "okay";
457
458 samsung,i2c-sda-delay = <100>;
459 samsung,i2c-max-bus-freq = <66000>;
460 samsung,i2c-slave-addr = <0x50>;
461
462 hdmiddc@50 {
463 compatible = "samsung,exynos4210-hdmiddc";
464 reg = <0x50>;
465 };
466 };
467
468 &i2c_3 {
469 status = "okay";
470
471 wm1811a@1a {
472 compatible = "wlf,wm1811";
473 reg = <0x1a>;
474
475 AVDD2-supply = <&main_dc_reg>;
476 CPVDD-supply = <&main_dc_reg>;
477 DBVDD1-supply = <&main_dc_reg>;
478 DBVDD2-supply = <&main_dc_reg>;
479 DBVDD3-supply = <&main_dc_reg>;
480 LDO1VDD-supply = <&main_dc_reg>;
481 SPKVDD1-supply = <&main_dc_reg>;
482 SPKVDD2-supply = <&main_dc_reg>;
483
484 wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
485 wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
486 };
487 };
488
489 &i2c_8 {
490 status = "okay";
491
492 samsung,i2c-sda-delay = <100>;
493 samsung,i2c-max-bus-freq = <66000>;
494 samsung,i2c-slave-addr = <0x38>;
495
496 hdmiphy@38 {
497 compatible = "samsung,exynos4212-hdmiphy";
498 reg = <0x38>;
499 };
500 };
501
502 &i2c_9 {
503 status = "okay";
504 samsung,i2c-sda-delay = <100>;
505 samsung,i2c-max-bus-freq = <40000>;
506 samsung,i2c-slave-addr = <0x38>;
507
508 sata_phy_i2c:sata-phy@38 {
509 compatible = "samsung,exynos-sataphy-i2c";
510 reg = <0x38>;
511 };
512 };
513
514 &i2s0 {
515 status = "okay";
516 };
517
518 &mfc {
519 samsung,mfc-r = <0x43000000 0x800000>;
520 samsung,mfc-l = <0x51000000 0x800000>;
521 };
522
523 &mmc_0 {
524 status = "okay";
525 num-slots = <1>;
526 broken-cd;
527 card-detect-delay = <200>;
528 samsung,dw-mshc-ciu-div = <3>;
529 samsung,dw-mshc-sdr-timing = <2 3>;
530 samsung,dw-mshc-ddr-timing = <1 2>;
531 vmmc-supply = <&mmc_reg>;
532 pinctrl-names = "default";
533 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
534 bus-width = <8>;
535 cap-mmc-highspeed;
536 };
537
538 &mmc_2 {
539 status = "okay";
540 num-slots = <1>;
541 card-detect-delay = <200>;
542 samsung,dw-mshc-ciu-div = <3>;
543 samsung,dw-mshc-sdr-timing = <2 3>;
544 samsung,dw-mshc-ddr-timing = <1 2>;
545 vmmc-supply = <&mmc_reg>;
546 pinctrl-names = "default";
547 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
548 bus-width = <4>;
549 disable-wp;
550 cap-sd-highspeed;
551 };
552
553 &rtc {
554 status = "okay";
555 };
556
557 &sata {
558 status = "okay";
559 };
560
561 &sata_phy {
562 status = "okay";
563 samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
564 };
This page took 0.044224 seconds and 5 git commands to generate.