arch/arm/boot/dts/imx23.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 gpio0 = &gpio0;
  19                 gpio1 = &gpio1;
  20                 gpio2 = &gpio2;
  21         };
  22
  23         cpus {
  24                 cpu@0 {
  25                         compatible = "arm,arm926ejs";
  26                 };
  27         };
  28
  29         apb@80000000 {
  30                 compatible = "simple-bus";
  31                 #address-cells = <1>;
  32                 #size-cells = <1>;
  33                 reg = <0x80000000 0x80000>;
  34                 ranges;
  35
  36                 apbh@80000000 {
  37                         compatible = "simple-bus";
  38                         #address-cells = <1>;
  39                         #size-cells = <1>;
  40                         reg = <0x80000000 0x40000>;
  41                         ranges;
  42
  43                         icoll: interrupt-controller@80000000 {
  44                                 compatible = "fsl,imx23-icoll", "fsl,mxs-icoll";
  45                                 interrupt-controller;
  46                                 #interrupt-cells = <1>;
  47                                 reg = <0x80000000 0x2000>;
  48                         };
  49
  50                         dma-apbh@80004000 {
  51                                 compatible = "fsl,imx23-dma-apbh";
  52                                 reg = <0x80004000 2000>;
  53                         };
  54
  55                         ecc@80008000 {
  56                                 reg = <0x80008000 2000>;
  57                                 status = "disabled";
  58                         };
  59
  60                         bch@8000a000 {
  61                                 reg = <0x8000a000 2000>;
  62                                 status = "disabled";
  63                         };
  64
  65                         gpmi@8000c000 {
  66                                 reg = <0x8000c000 2000>;
  67                                 status = "disabled";
  68                         };
  69
  70                         ssp0: ssp@80010000 {
  71                                 reg = <0x80010000 2000>;
  72                                 interrupts = <15 14>;
  73                                 fsl,ssp-dma-channel = <1>;
  74                                 status = "disabled";
  75                         };
  76
  77                         etm@80014000 {
  78                                 reg = <0x80014000 2000>;
  79                                 status = "disabled";
  80                         };
  81
  82                         pinctrl@80018000 {
  83                                 #address-cells = <1>;
  84                                 #size-cells = <0>;
  85                                 compatible = "fsl,imx23-pinctrl", "simple-bus";
  86                                 reg = <0x80018000 2000>;
  87
  88                                 gpio0: gpio@0 {
  89                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
  90                                         interrupts = <16>;
  91                                         gpio-controller;
  92                                         #gpio-cells = <2>;
  93                                         interrupt-controller;
  94                                         #interrupt-cells = <2>;
  95                                 };
  96
  97                                 gpio1: gpio@1 {
  98                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
  99                                         interrupts = <17>;
 100                                         gpio-controller;
 101                                         #gpio-cells = <2>;
 102                                         interrupt-controller;
 103                                         #interrupt-cells = <2>;
 104                                 };
 105
 106                                 gpio2: gpio@2 {
 107                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
 108                                         interrupts = <18>;
 109                                         gpio-controller;
 110                                         #gpio-cells = <2>;
 111                                         interrupt-controller;
 112                                         #interrupt-cells = <2>;
 113                                 };
 114
 115                                 duart_pins_a: duart@0 {
 116                                         reg = <0>;
 117                                         fsl,pinmux-ids = <0x11a2 0x11b2>;
 118                                         fsl,drive-strength = <0>;
 119                                         fsl,voltage = <1>;
 120                                         fsl,pull-up = <0>;
 121                                 };
 122
 123                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 124                                         reg = <0>;
 125                                         fsl,pinmux-ids = <0x2020 0x2030 0x2040
 126                                                 0x2050 0x0082 0x0092 0x00a2
 127                                                 0x00b2 0x2000 0x2010 0x2060>;
 128                                         fsl,drive-strength = <1>;
 129                                         fsl,voltage = <1>;
 130                                         fsl,pull-up = <1>;
 131                                 };
 132
 133                                 mmc0_pins_fixup: mmc0-pins-fixup {
 134                                         fsl,pinmux-ids = <0x2010 0x2060>;
 135                                         fsl,pull-up = <0>;
 136                                 };
 137                         };
 138
 139                         digctl@8001c000 {
 140                                 reg = <0x8001c000 2000>;
 141                                 status = "disabled";
 142                         };
 143
 144                         emi@80020000 {
 145                                 reg = <0x80020000 2000>;
 146                                 status = "disabled";
 147                         };
 148
 149                         dma-apbx@80024000 {
 150                                 compatible = "fsl,imx23-dma-apbx";
 151                                 reg = <0x80024000 2000>;
 152                         };
 153
 154                         dcp@80028000 {
 155                                 reg = <0x80028000 2000>;
 156                                 status = "disabled";
 157                         };
 158
 159                         pxp@8002a000 {
 160                                 reg = <0x8002a000 2000>;
 161                                 status = "disabled";
 162                         };
 163
 164                         ocotp@8002c000 {
 165                                 reg = <0x8002c000 2000>;
 166                                 status = "disabled";
 167                         };
 168
 169                         axi-ahb@8002e000 {
 170                                 reg = <0x8002e000 2000>;
 171                                 status = "disabled";
 172                         };
 173
 174                         lcdif@80030000 {
 175                                 reg = <0x80030000 2000>;
 176                                 status = "disabled";
 177                         };
 178
 179                         ssp1: ssp@80034000 {
 180                                 reg = <0x80034000 2000>;
 181                                 interrupts = <2 20>;
 182                                 fsl,ssp-dma-channel = <2>;
 183                                 status = "disabled";
 184                         };
 185
 186                         tvenc@80038000 {
 187                                 reg = <0x80038000 2000>;
 188                                 status = "disabled";
 189                         };
 190                 };
 191
 192                 apbx@80040000 {
 193                         compatible = "simple-bus";
 194                         #address-cells = <1>;
 195                         #size-cells = <1>;
 196                         reg = <0x80040000 0x40000>;
 197                         ranges;
 198
 199                         clkctl@80040000 {
 200                                 reg = <0x80040000 2000>;
 201                                 status = "disabled";
 202                         };
 203
 204                         saif0: saif@80042000 {
 205                                 reg = <0x80042000 2000>;
 206                                 status = "disabled";
 207                         };
 208
 209                         power@80044000 {
 210                                 reg = <0x80044000 2000>;
 211                                 status = "disabled";
 212                         };
 213
 214                         saif1: saif@80046000 {
 215                                 reg = <0x80046000 2000>;
 216                                 status = "disabled";
 217                         };
 218
 219                         audio-out@80048000 {
 220                                 reg = <0x80048000 2000>;
 221                                 status = "disabled";
 222                         };
 223
 224                         audio-in@8004c000 {
 225                                 reg = <0x8004c000 2000>;
 226                                 status = "disabled";
 227                         };
 228
 229                         lradc@80050000 {
 230                                 reg = <0x80050000 2000>;
 231                                 status = "disabled";
 232                         };
 233
 234                         spdif@80054000 {
 235                                 reg = <0x80054000 2000>;
 236                                 status = "disabled";
 237                         };
 238
 239                         i2c@80058000 {
 240                                 reg = <0x80058000 2000>;
 241                                 status = "disabled";
 242                         };
 243
 244                         rtc@8005c000 {
 245                                 reg = <0x8005c000 2000>;
 246                                 status = "disabled";
 247                         };
 248
 249                         pwm@80064000 {
 250                                 reg = <0x80064000 2000>;
 251                                 status = "disabled";
 252                         };
 253
 254                         timrot@80068000 {
 255                                 reg = <0x80068000 2000>;
 256                                 status = "disabled";
 257                         };
 258
 259                         auart0: serial@8006c000 {
 260                                 reg = <0x8006c000 0x2000>;
 261                                 status = "disabled";
 262                         };
 263
 264                         auart1: serial@8006e000 {
 265                                 reg = <0x8006e000 0x2000>;
 266                                 status = "disabled";
 267                         };
 268
 269                         duart: serial@80070000 {
 270                                 compatible = "arm,pl011", "arm,primecell";
 271                                 reg = <0x80070000 0x2000>;
 272                                 interrupts = <0>;
 273                                 status = "disabled";
 274                         };
 275
 276                         usbphy@8007c000 {
 277                                 reg = <0x8007c000 0x2000>;
 278                                 status = "disabled";
 279                         };
 280                 };
 281         };
 282
 283         ahb@80080000 {
 284                 compatible = "simple-bus";
 285                 #address-cells = <1>;
 286                 #size-cells = <1>;
 287                 reg = <0x80080000 0x80000>;
 288                 ranges;
 289
 290                 usbctrl@80080000 {
 291                         reg = <0x80080000 0x10000>;
 292                         status = "disabled";
 293                 };
 294         };
 295 };