arch/arm/boot/dts/imx23.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 gpio0 = &gpio0;
  19                 gpio1 = &gpio1;
  20                 gpio2 = &gpio2;
  21                 serial0 = &auart0;
  22                 serial1 = &auart1;
  23         };
  24
  25         cpus {
  26                 cpu@0 {
  27                         compatible = "arm,arm926ejs";
  28                 };
  29         };
  30
  31         apb@80000000 {
  32                 compatible = "simple-bus";
  33                 #address-cells = <1>;
  34                 #size-cells = <1>;
  35                 reg = <0x80000000 0x80000>;
  36                 ranges;
  37
  38                 apbh@80000000 {
  39                         compatible = "simple-bus";
  40                         #address-cells = <1>;
  41                         #size-cells = <1>;
  42                         reg = <0x80000000 0x40000>;
  43                         ranges;
  44
  45                         icoll: interrupt-controller@80000000 {
  46                                 compatible = "fsl,imx23-icoll", "fsl,mxs-icoll";
  47                                 interrupt-controller;
  48                                 #interrupt-cells = <1>;
  49                                 reg = <0x80000000 0x2000>;
  50                         };
  51
  52                         dma-apbh@80004000 {
  53                                 compatible = "fsl,imx23-dma-apbh";
  54                                 reg = <0x80004000 2000>;
  55                         };
  56
  57                         ecc@80008000 {
  58                                 reg = <0x80008000 2000>;
  59                                 status = "disabled";
  60                         };
  61
  62                         gpmi-nand@8000c000 {
  63                                 compatible = "fsl,imx23-gpmi-nand";
  64                                 #address-cells = <1>;
  65                                 #size-cells = <1>;
  66                                 reg = <0x8000c000 2000>, <0x8000a000 2000>;
  67                                 reg-names = "gpmi-nand", "bch";
  68                                 interrupts = <13>, <56>;
  69                                 interrupt-names = "gpmi-dma", "bch";
  70                                 fsl,gpmi-dma-channel = <4>;
  71                                 status = "disabled";
  72                         };
  73
  74                         ssp0: ssp@80010000 {
  75                                 reg = <0x80010000 2000>;
  76                                 interrupts = <15 14>;
  77                                 fsl,ssp-dma-channel = <1>;
  78                                 status = "disabled";
  79                         };
  80
  81                         etm@80014000 {
  82                                 reg = <0x80014000 2000>;
  83                                 status = "disabled";
  84                         };
  85
  86                         pinctrl@80018000 {
  87                                 #address-cells = <1>;
  88                                 #size-cells = <0>;
  89                                 compatible = "fsl,imx23-pinctrl", "simple-bus";
  90                                 reg = <0x80018000 2000>;
  91
  92                                 gpio0: gpio@0 {
  93                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
  94                                         interrupts = <16>;
  95                                         gpio-controller;
  96                                         #gpio-cells = <2>;
  97                                         interrupt-controller;
  98                                         #interrupt-cells = <2>;
  99                                 };
 100
 101                                 gpio1: gpio@1 {
 102                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
 103                                         interrupts = <17>;
 104                                         gpio-controller;
 105                                         #gpio-cells = <2>;
 106                                         interrupt-controller;
 107                                         #interrupt-cells = <2>;
 108                                 };
 109
 110                                 gpio2: gpio@2 {
 111                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
 112                                         interrupts = <18>;
 113                                         gpio-controller;
 114                                         #gpio-cells = <2>;
 115                                         interrupt-controller;
 116                                         #interrupt-cells = <2>;
 117                                 };
 118
 119                                 duart_pins_a: duart@0 {
 120                                         reg = <0>;
 121                                         fsl,pinmux-ids = <
 122                                                 0x11a2 /* MX23_PAD_PWM0__DUART_RX */
 123                                                 0x11b2 /* MX23_PAD_PWM1__DUART_TX */
 124                                         >;
 125                                         fsl,drive-strength = <0>;
 126                                         fsl,voltage = <1>;
 127                                         fsl,pull-up = <0>;
 128                                 };
 129
 130                                 auart0_pins_a: auart0@0 {
 131                                         reg = <0>;
 132                                         fsl,pinmux-ids = <
 133                                                 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
 134                                                 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
 135                                                 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
 136                                                 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
 137                                         >;
 138                                         fsl,drive-strength = <0>;
 139                                         fsl,voltage = <1>;
 140                                         fsl,pull-up = <0>;
 141                                 };
 142
 143                                 gpmi_pins_a: gpmi-nand@0 {
 144                                         reg = <0>;
 145                                         fsl,pinmux-ids = <
 146                                                 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
 147                                                 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
 148                                                 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
 149                                                 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
 150                                                 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
 151                                                 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
 152                                                 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
 153                                                 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
 154                                                 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
 155                                                 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
 156                                                 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
 157                                                 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
 158                                                 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
 159                                                 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
 160                                                 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
 161                                                 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
 162                                                 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */
 163                                         >;
 164                                         fsl,drive-strength = <0>;
 165                                         fsl,voltage = <1>;
 166                                         fsl,pull-up = <0>;
 167                                 };
 168
 169                                 gpmi_pins_fixup: gpmi-pins-fixup {
 170                                         fsl,pinmux-ids = <
 171                                                 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
 172                                                 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
 173                                                 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
 174                                         >;
 175                                         fsl,drive-strength = <2>;
 176                                 };
 177
 178                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 179                                         reg = <0>;
 180                                         fsl,pinmux-ids = <
 181                                                 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
 182                                                 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
 183                                                 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
 184                                                 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
 185                                                 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
 186                                                 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 187                                                 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 188                                         >;
 189                                         fsl,drive-strength = <1>;
 190                                         fsl,voltage = <1>;
 191                                         fsl,pull-up = <1>;
 192                                 };
 193
 194                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 195                                         reg = <0>;
 196                                         fsl,pinmux-ids = <
 197                                                 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
 198                                                 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
 199                                                 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
 200                                                 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
 201                                                 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
 202                                                 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
 203                                                 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
 204                                                 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
 205                                                 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
 206                                                 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 207                                                 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 208                                         >;
 209                                         fsl,drive-strength = <1>;
 210                                         fsl,voltage = <1>;
 211                                         fsl,pull-up = <1>;
 212                                 };
 213
 214                                 mmc0_pins_fixup: mmc0-pins-fixup {
 215                                         fsl,pinmux-ids = <
 216                                                 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 217                                                 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 218                                         >;
 219                                         fsl,pull-up = <0>;
 220                                 };
 221
 222                                 pwm2_pins_a: pwm2@0 {
 223                                         reg = <0>;
 224                                         fsl,pinmux-ids = <
 225                                                 0x11c0 /* MX23_PAD_PWM2__PWM2 */
 226                                         >;
 227                                         fsl,drive-strength = <0>;
 228                                         fsl,voltage = <1>;
 229                                         fsl,pull-up = <0>;
 230                                 };
 231
 232                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 233                                         reg = <0>;
 234                                         fsl,pinmux-ids = <
 235                                                 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
 236                                                 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
 237                                                 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
 238                                                 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
 239                                                 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
 240                                                 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
 241                                                 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
 242                                                 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
 243                                                 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
 244                                                 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
 245                                                 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
 246                                                 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
 247                                                 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
 248                                                 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
 249                                                 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
 250                                                 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
 251                                                 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
 252                                                 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
 253                                                 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
 254                                                 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
 255                                                 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
 256                                                 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
 257                                                 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
 258                                                 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
 259                                                 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
 260                                                 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
 261                                                 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
 262                                                 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
 263                                         >;
 264                                         fsl,drive-strength = <0>;
 265                                         fsl,voltage = <1>;
 266                                         fsl,pull-up = <0>;
 267                                 };
 268                         };
 269
 270                         digctl@8001c000 {
 271                                 reg = <0x8001c000 2000>;
 272                                 status = "disabled";
 273                         };
 274
 275                         emi@80020000 {
 276                                 reg = <0x80020000 2000>;
 277                                 status = "disabled";
 278                         };
 279
 280                         dma-apbx@80024000 {
 281                                 compatible = "fsl,imx23-dma-apbx";
 282                                 reg = <0x80024000 2000>;
 283                         };
 284
 285                         dcp@80028000 {
 286                                 reg = <0x80028000 2000>;
 287                                 status = "disabled";
 288                         };
 289
 290                         pxp@8002a000 {
 291                                 reg = <0x8002a000 2000>;
 292                                 status = "disabled";
 293                         };
 294
 295                         ocotp@8002c000 {
 296                                 reg = <0x8002c000 2000>;
 297                                 status = "disabled";
 298                         };
 299
 300                         axi-ahb@8002e000 {
 301                                 reg = <0x8002e000 2000>;
 302                                 status = "disabled";
 303                         };
 304
 305                         lcdif@80030000 {
 306                                 compatible = "fsl,imx23-lcdif";
 307                                 reg = <0x80030000 2000>;
 308                                 interrupts = <46 45>;
 309                                 status = "disabled";
 310                         };
 311
 312                         ssp1: ssp@80034000 {
 313                                 reg = <0x80034000 2000>;
 314                                 interrupts = <2 20>;
 315                                 fsl,ssp-dma-channel = <2>;
 316                                 status = "disabled";
 317                         };
 318
 319                         tvenc@80038000 {
 320                                 reg = <0x80038000 2000>;
 321                                 status = "disabled";
 322                         };
 323                 };
 324
 325                 apbx@80040000 {
 326                         compatible = "simple-bus";
 327                         #address-cells = <1>;
 328                         #size-cells = <1>;
 329                         reg = <0x80040000 0x40000>;
 330                         ranges;
 331
 332                         clkctl@80040000 {
 333                                 reg = <0x80040000 2000>;
 334                                 status = "disabled";
 335                         };
 336
 337                         saif0: saif@80042000 {
 338                                 reg = <0x80042000 2000>;
 339                                 status = "disabled";
 340                         };
 341
 342                         power@80044000 {
 343                                 reg = <0x80044000 2000>;
 344                                 status = "disabled";
 345                         };
 346
 347                         saif1: saif@80046000 {
 348                                 reg = <0x80046000 2000>;
 349                                 status = "disabled";
 350                         };
 351
 352                         audio-out@80048000 {
 353                                 reg = <0x80048000 2000>;
 354                                 status = "disabled";
 355                         };
 356
 357                         audio-in@8004c000 {
 358                                 reg = <0x8004c000 2000>;
 359                                 status = "disabled";
 360                         };
 361
 362                         lradc@80050000 {
 363                                 reg = <0x80050000 2000>;
 364                                 status = "disabled";
 365                         };
 366
 367                         spdif@80054000 {
 368                                 reg = <0x80054000 2000>;
 369                                 status = "disabled";
 370                         };
 371
 372                         i2c@80058000 {
 373                                 reg = <0x80058000 2000>;
 374                                 status = "disabled";
 375                         };
 376
 377                         rtc@8005c000 {
 378                                 compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
 379                                 reg = <0x8005c000 2000>;
 380                                 interrupts = <22>;
 381                         };
 382
 383                         pwm: pwm@80064000 {
 384                                 compatible = "fsl,imx23-pwm";
 385                                 reg = <0x80064000 2000>;
 386                                 #pwm-cells = <2>;
 387                                 fsl,pwm-number = <5>;
 388                                 status = "disabled";
 389                         };
 390
 391                         timrot@80068000 {
 392                                 reg = <0x80068000 2000>;
 393                                 status = "disabled";
 394                         };
 395
 396                         auart0: serial@8006c000 {
 397                                 compatible = "fsl,imx23-auart";
 398                                 reg = <0x8006c000 0x2000>;
 399                                 interrupts = <24 25 23>;
 400                                 status = "disabled";
 401                         };
 402
 403                         auart1: serial@8006e000 {
 404                                 compatible = "fsl,imx23-auart";
 405                                 reg = <0x8006e000 0x2000>;
 406                                 interrupts = <59 60 58>;
 407                                 status = "disabled";
 408                         };
 409
 410                         duart: serial@80070000 {
 411                                 compatible = "arm,pl011", "arm,primecell";
 412                                 reg = <0x80070000 0x2000>;
 413                                 interrupts = <0>;
 414                                 status = "disabled";
 415                         };
 416
 417                         usbphy@8007c000 {
 418                                 reg = <0x8007c000 0x2000>;
 419                                 status = "disabled";
 420                         };
 421                 };
 422         };
 423
 424         ahb@80080000 {
 425                 compatible = "simple-bus";
 426                 #address-cells = <1>;
 427                 #size-cells = <1>;
 428                 reg = <0x80080000 0x80000>;
 429                 ranges;
 430
 431                 usbctrl@80080000 {
 432                         reg = <0x80080000 0x10000>;
 433                         status = "disabled";
 434                 };
 435         };
 436 };