arch/arm/boot/dts/imx25.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include "imx25-pinfunc.h"
  14
  15 / {
  16         aliases {
  17                 ethernet0 = &fec;
  18                 gpio0 = &gpio1;
  19                 gpio1 = &gpio2;
  20                 gpio2 = &gpio3;
  21                 gpio3 = &gpio4;
  22                 i2c0 = &i2c1;
  23                 i2c1 = &i2c2;
  24                 i2c2 = &i2c3;
  25                 mmc0 = &esdhc1;
  26                 mmc1 = &esdhc2;
  27                 pwm0 = &pwm1;
  28                 pwm1 = &pwm2;
  29                 pwm2 = &pwm3;
  30                 pwm3 = &pwm4;
  31                 serial0 = &uart1;
  32                 serial1 = &uart2;
  33                 serial2 = &uart3;
  34                 serial3 = &uart4;
  35                 serial4 = &uart5;
  36                 spi0 = &spi1;
  37                 spi1 = &spi2;
  38                 spi2 = &spi3;
  39                 usb0 = &usbotg;
  40                 usb1 = &usbhost1;
  41         };
  42
  43         cpus {
  44                 #address-cells = <0>;
  45                 #size-cells = <0>;
  46
  47                 cpu {
  48                         compatible = "arm,arm926ej-s";
  49                         device_type = "cpu";
  50                 };
  51         };
  52
  53         asic: asic-interrupt-controller@68000000 {
  54                 compatible = "fsl,imx25-asic", "fsl,avic";
  55                 interrupt-controller;
  56                 #interrupt-cells = <1>;
  57                 reg = <0x68000000 0x8000000>;
  58         };
  59
  60         clocks {
  61                 #address-cells = <1>;
  62                 #size-cells = <0>;
  63
  64                 osc {
  65                         compatible = "fsl,imx-osc", "fixed-clock";
  66                         #clock-cells = <0>;
  67                         clock-frequency = <24000000>;
  68                 };
  69         };
  70
  71         soc {
  72                 #address-cells = <1>;
  73                 #size-cells = <1>;
  74                 compatible = "simple-bus";
  75                 interrupt-parent = <&asic>;
  76                 ranges;
  77
  78                 aips@43f00000 { /* AIPS1 */
  79                         compatible = "fsl,aips-bus", "simple-bus";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82                         reg = <0x43f00000 0x100000>;
  83                         ranges;
  84
  85                         i2c1: i2c@43f80000 {
  86                                 #address-cells = <1>;
  87                                 #size-cells = <0>;
  88                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  89                                 reg = <0x43f80000 0x4000>;
  90                                 clocks = <&clks 48>;
  91                                 clock-names = "";
  92                                 interrupts = <3>;
  93                                 status = "disabled";
  94                         };
  95
  96                         i2c3: i2c@43f84000 {
  97                                 #address-cells = <1>;
  98                                 #size-cells = <0>;
  99                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 100                                 reg = <0x43f84000 0x4000>;
 101                                 clocks = <&clks 48>;
 102                                 clock-names = "";
 103                                 interrupts = <10>;
 104                                 status = "disabled";
 105                         };
 106
 107                         can1: can@43f88000 {
 108                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 109                                 reg = <0x43f88000 0x4000>;
 110                                 interrupts = <43>;
 111                                 clocks = <&clks 75>, <&clks 75>;
 112                                 clock-names = "ipg", "per";
 113                                 status = "disabled";
 114                         };
 115
 116                         can2: can@43f8c000 {
 117                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 118                                 reg = <0x43f8c000 0x4000>;
 119                                 interrupts = <44>;
 120                                 clocks = <&clks 76>, <&clks 76>;
 121                                 clock-names = "ipg", "per";
 122                                 status = "disabled";
 123                         };
 124
 125                         uart1: serial@43f90000 {
 126                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 127                                 reg = <0x43f90000 0x4000>;
 128                                 interrupts = <45>;
 129                                 clocks = <&clks 120>, <&clks 57>;
 130                                 clock-names = "ipg", "per";
 131                                 status = "disabled";
 132                         };
 133
 134                         uart2: serial@43f94000 {
 135                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 136                                 reg = <0x43f94000 0x4000>;
 137                                 interrupts = <32>;
 138                                 clocks = <&clks 121>, <&clks 57>;
 139                                 clock-names = "ipg", "per";
 140                                 status = "disabled";
 141                         };
 142
 143                         i2c2: i2c@43f98000 {
 144                                 #address-cells = <1>;
 145                                 #size-cells = <0>;
 146                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 147                                 reg = <0x43f98000 0x4000>;
 148                                 clocks = <&clks 48>;
 149                                 clock-names = "";
 150                                 interrupts = <4>;
 151                                 status = "disabled";
 152                         };
 153
 154                         owire@43f9c000 {
 155                                 #address-cells = <1>;
 156                                 #size-cells = <0>;
 157                                 reg = <0x43f9c000 0x4000>;
 158                                 clocks = <&clks 51>;
 159                                 clock-names = "";
 160                                 interrupts = <2>;
 161                                 status = "disabled";
 162                         };
 163
 164                         spi1: cspi@43fa4000 {
 165                                 #address-cells = <1>;
 166                                 #size-cells = <0>;
 167                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 168                                 reg = <0x43fa4000 0x4000>;
 169                                 clocks = <&clks 78>, <&clks 78>;
 170                                 clock-names = "ipg", "per";
 171                                 interrupts = <14>;
 172                                 status = "disabled";
 173                         };
 174
 175                         kpp: kpp@43fa8000 {
 176                                 #address-cells = <1>;
 177                                 #size-cells = <0>;
 178                                 compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 179                                 reg = <0x43fa8000 0x4000>;
 180                                 clocks = <&clks 102>;
 181                                 clock-names = "";
 182                                 interrupts = <24>;
 183                                 status = "disabled";
 184                         };
 185
 186                         iomuxc: iomuxc@43fac000 {
 187                                 compatible = "fsl,imx25-iomuxc";
 188                                 reg = <0x43fac000 0x4000>;
 189                         };
 190
 191                         audmux: audmux@43fb0000 {
 192                                 compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
 193                                 reg = <0x43fb0000 0x4000>;
 194                                 status = "disabled";
 195                         };
 196                 };
 197
 198                 spba@50000000 {
 199                         compatible = "fsl,spba-bus", "simple-bus";
 200                         #address-cells = <1>;
 201                         #size-cells = <1>;
 202                         reg = <0x50000000 0x40000>;
 203                         ranges;
 204
 205                         spi3: cspi@50004000 {
 206                                 #address-cells = <1>;
 207                                 #size-cells = <0>;
 208                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 209                                 reg = <0x50004000 0x4000>;
 210                                 interrupts = <0>;
 211                                 clocks = <&clks 80>, <&clks 80>;
 212                                 clock-names = "ipg", "per";
 213                                 status = "disabled";
 214                         };
 215
 216                         uart4: serial@50008000 {
 217                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 218                                 reg = <0x50008000 0x4000>;
 219                                 interrupts = <5>;
 220                                 clocks = <&clks 123>, <&clks 57>;
 221                                 clock-names = "ipg", "per";
 222                                 status = "disabled";
 223                         };
 224
 225                         uart3: serial@5000c000 {
 226                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 227                                 reg = <0x5000c000 0x4000>;
 228                                 interrupts = <18>;
 229                                 clocks = <&clks 122>, <&clks 57>;
 230                                 clock-names = "ipg", "per";
 231                                 status = "disabled";
 232                         };
 233
 234                         spi2: cspi@50010000 {
 235                                 #address-cells = <1>;
 236                                 #size-cells = <0>;
 237                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 238                                 reg = <0x50010000 0x4000>;
 239                                 clocks = <&clks 79>, <&clks 79>;
 240                                 clock-names = "ipg", "per";
 241                                 interrupts = <13>;
 242                                 status = "disabled";
 243                         };
 244
 245                         ssi2: ssi@50014000 {
 246                                 #sound-dai-cells = <0>;
 247                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 248                                 reg = <0x50014000 0x4000>;
 249                                 interrupts = <11>;
 250                                 clocks = <&clks 118>;
 251                                 clock-names = "ipg";
 252                                 dmas = <&sdma 24 1 0>,
 253                                        <&sdma 25 1 0>;
 254                                 dma-names = "rx", "tx";
 255                                 status = "disabled";
 256                         };
 257
 258                         esai@50018000 {
 259                                 reg = <0x50018000 0x4000>;
 260                                 interrupts = <7>;
 261                         };
 262
 263                         uart5: serial@5002c000 {
 264                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 265                                 reg = <0x5002c000 0x4000>;
 266                                 interrupts = <40>;
 267                                 clocks = <&clks 124>, <&clks 57>;
 268                                 clock-names = "ipg", "per";
 269                                 status = "disabled";
 270                         };
 271
 272                         tscadc: tscadc@50030000 {
 273                                 compatible = "fsl,imx25-tsadc";
 274                                 reg = <0x50030000 0xc>;
 275                                 interrupts = <46>;
 276                                 clocks = <&clks 119>;
 277                                 clock-names = "ipg";
 278                                 interrupt-controller;
 279                                 #interrupt-cells = <1>;
 280                                 #address-cells = <1>;
 281                                 #size-cells = <1>;
 282                                 status = "disabled";
 283
 284                                 adc: adc@50030800 {
 285                                         compatible = "fsl,imx25-gcq";
 286                                         reg = <0x50030800 0x60>;
 287                                         interrupt-parent = <&tscadc>;
 288                                         interrupts = <1>;
 289                                         #address-cells = <1>;
 290                                         #size-cells = <0>;
 291                                         status = "disabled";
 292                                 };
 293
 294                                 tsc: tcq@50030400 {
 295                                         compatible = "fsl,imx25-tcq";
 296                                         reg = <0x50030400 0x60>;
 297                                         interrupt-parent = <&tscadc>;
 298                                         interrupts = <0>;
 299                                         fsl,wires = <4>;
 300                                         status = "disabled";
 301                                 };
 302                         };
 303
 304                         ssi1: ssi@50034000 {
 305                                 #sound-dai-cells = <0>;
 306                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 307                                 reg = <0x50034000 0x4000>;
 308                                 interrupts = <12>;
 309                                 clocks = <&clks 117>;
 310                                 clock-names = "ipg";
 311                                 dmas = <&sdma 28 1 0>,
 312                                        <&sdma 29 1 0>;
 313                                 dma-names = "rx", "tx";
 314                                 status = "disabled";
 315                         };
 316
 317                         fec: ethernet@50038000 {
 318                                 compatible = "fsl,imx25-fec";
 319                                 reg = <0x50038000 0x4000>;
 320                                 interrupts = <57>;
 321                                 clocks = <&clks 88>, <&clks 65>;
 322                                 clock-names = "ipg", "ahb";
 323                                 status = "disabled";
 324                         };
 325                 };
 326
 327                 aips@53f00000 { /* AIPS2 */
 328                         compatible = "fsl,aips-bus", "simple-bus";
 329                         #address-cells = <1>;
 330                         #size-cells = <1>;
 331                         reg = <0x53f00000 0x100000>;
 332                         ranges;
 333
 334                         clks: ccm@53f80000 {
 335                                 compatible = "fsl,imx25-ccm";
 336                                 reg = <0x53f80000 0x4000>;
 337                                 interrupts = <31>;
 338                                 #clock-cells = <1>;
 339                         };
 340
 341                         gpt4: timer@53f84000 {
 342                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 343                                 reg = <0x53f84000 0x4000>;
 344                                 clocks = <&clks 95>, <&clks 47>;
 345                                 clock-names = "ipg", "per";
 346                                 interrupts = <1>;
 347                         };
 348
 349                         gpt3: timer@53f88000 {
 350                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 351                                 reg = <0x53f88000 0x4000>;
 352                                 clocks = <&clks 94>, <&clks 47>;
 353                                 clock-names = "ipg", "per";
 354                                 interrupts = <29>;
 355                         };
 356
 357                         gpt2: timer@53f8c000 {
 358                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 359                                 reg = <0x53f8c000 0x4000>;
 360                                 clocks = <&clks 93>, <&clks 47>;
 361                                 clock-names = "ipg", "per";
 362                                 interrupts = <53>;
 363                         };
 364
 365                         gpt1: timer@53f90000 {
 366                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 367                                 reg = <0x53f90000 0x4000>;
 368                                 clocks = <&clks 92>, <&clks 47>;
 369                                 clock-names = "ipg", "per";
 370                                 interrupts = <54>;
 371                         };
 372
 373                         epit1: timer@53f94000 {
 374                                 compatible = "fsl,imx25-epit";
 375                                 reg = <0x53f94000 0x4000>;
 376                                 interrupts = <28>;
 377                         };
 378
 379                         epit2: timer@53f98000 {
 380                                 compatible = "fsl,imx25-epit";
 381                                 reg = <0x53f98000 0x4000>;
 382                                 interrupts = <27>;
 383                         };
 384
 385                         gpio4: gpio@53f9c000 {
 386                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 387                                 reg = <0x53f9c000 0x4000>;
 388                                 interrupts = <23>;
 389                                 gpio-controller;
 390                                 #gpio-cells = <2>;
 391                                 interrupt-controller;
 392                                 #interrupt-cells = <2>;
 393                         };
 394
 395                         pwm2: pwm@53fa0000 {
 396                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 397                                 #pwm-cells = <2>;
 398                                 reg = <0x53fa0000 0x4000>;
 399                                 clocks = <&clks 106>, <&clks 52>;
 400                                 clock-names = "ipg", "per";
 401                                 interrupts = <36>;
 402                         };
 403
 404                         gpio3: gpio@53fa4000 {
 405                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 406                                 reg = <0x53fa4000 0x4000>;
 407                                 interrupts = <16>;
 408                                 gpio-controller;
 409                                 #gpio-cells = <2>;
 410                                 interrupt-controller;
 411                                 #interrupt-cells = <2>;
 412                         };
 413
 414                         pwm3: pwm@53fa8000 {
 415                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 416                                 #pwm-cells = <2>;
 417                                 reg = <0x53fa8000 0x4000>;
 418                                 clocks = <&clks 107>, <&clks 52>;
 419                                 clock-names = "ipg", "per";
 420                                 interrupts = <41>;
 421                         };
 422
 423                         scc: crypto@53fac000 {
 424                                 compatible = "fsl,imx25-scc";
 425                                 reg = <0x53fac000 0x4000>;
 426                                 clocks = <&clks 111>;
 427                                 clock-names = "ipg";
 428                                 interrupts = <49>, <50>;
 429                                 interrupt-names = "scm", "smn";
 430                         };
 431
 432                         esdhc1: esdhc@53fb4000 {
 433                                 compatible = "fsl,imx25-esdhc";
 434                                 reg = <0x53fb4000 0x4000>;
 435                                 interrupts = <9>;
 436                                 clocks = <&clks 86>, <&clks 63>, <&clks 45>;
 437                                 clock-names = "ipg", "ahb", "per";
 438                                 status = "disabled";
 439                         };
 440
 441                         esdhc2: esdhc@53fb8000 {
 442                                 compatible = "fsl,imx25-esdhc";
 443                                 reg = <0x53fb8000 0x4000>;
 444                                 interrupts = <8>;
 445                                 clocks = <&clks 87>, <&clks 64>, <&clks 46>;
 446                                 clock-names = "ipg", "ahb", "per";
 447                                 status = "disabled";
 448                         };
 449
 450                         lcdc: lcdc@53fbc000 {
 451                                 compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 452                                 reg = <0x53fbc000 0x4000>;
 453                                 interrupts = <39>;
 454                                 clocks = <&clks 103>, <&clks 66>, <&clks 49>;
 455                                 clock-names = "ipg", "ahb", "per";
 456                                 status = "disabled";
 457                         };
 458
 459                         slcdc@53fc0000 {
 460                                 reg = <0x53fc0000 0x4000>;
 461                                 interrupts = <38>;
 462                                 status = "disabled";
 463                         };
 464
 465                         pwm4: pwm@53fc8000 {
 466                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 467                                 #pwm-cells = <2>;
 468                                 reg = <0x53fc8000 0x4000>;
 469                                 clocks = <&clks 108>, <&clks 52>;
 470                                 clock-names = "ipg", "per";
 471                                 interrupts = <42>;
 472                         };
 473
 474                         gpio1: gpio@53fcc000 {
 475                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 476                                 reg = <0x53fcc000 0x4000>;
 477                                 interrupts = <52>;
 478                                 gpio-controller;
 479                                 #gpio-cells = <2>;
 480                                 interrupt-controller;
 481                                 #interrupt-cells = <2>;
 482                         };
 483
 484                         gpio2: gpio@53fd0000 {
 485                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 486                                 reg = <0x53fd0000 0x4000>;
 487                                 interrupts = <51>;
 488                                 gpio-controller;
 489                                 #gpio-cells = <2>;
 490                                 interrupt-controller;
 491                                 #interrupt-cells = <2>;
 492                         };
 493
 494                         sdma: sdma@53fd4000 {
 495                                 compatible = "fsl,imx25-sdma";
 496                                 reg = <0x53fd4000 0x4000>;
 497                                 clocks = <&clks 112>, <&clks 68>;
 498                                 clock-names = "ipg", "ahb";
 499                                 #dma-cells = <3>;
 500                                 interrupts = <34>;
 501                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
 502                         };
 503
 504                         wdog@53fdc000 {
 505                                 compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 506                                 reg = <0x53fdc000 0x4000>;
 507                                 clocks = <&clks 126>;
 508                                 clock-names = "";
 509                                 interrupts = <55>;
 510                         };
 511
 512                         pwm1: pwm@53fe0000 {
 513                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 514                                 #pwm-cells = <2>;
 515                                 reg = <0x53fe0000 0x4000>;
 516                                 clocks = <&clks 105>, <&clks 52>;
 517                                 clock-names = "ipg", "per";
 518                                 interrupts = <26>;
 519                         };
 520
 521                         iim: iim@53ff0000 {
 522                                 compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 523                                 reg = <0x53ff0000 0x4000>;
 524                                 interrupts = <19>;
 525                                 clocks = <&clks 99>;
 526                         };
 527
 528                         usbotg: usb@53ff4000 {
 529                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 530                                 reg = <0x53ff4000 0x0200>;
 531                                 interrupts = <37>;
 532                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 533                                 clock-names = "ipg", "ahb", "per";
 534                                 fsl,usbmisc = <&usbmisc 0>;
 535                                 fsl,usbphy = <&usbphy0>;
 536                                 status = "disabled";
 537                         };
 538
 539                         usbhost1: usb@53ff4400 {
 540                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 541                                 reg = <0x53ff4400 0x0200>;
 542                                 interrupts = <35>;
 543                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 544                                 clock-names = "ipg", "ahb", "per";
 545                                 fsl,usbmisc = <&usbmisc 1>;
 546                                 fsl,usbphy = <&usbphy1>;
 547                                 status = "disabled";
 548                         };
 549
 550                         usbmisc: usbmisc@53ff4600 {
 551                                 #index-cells = <1>;
 552                                 compatible = "fsl,imx25-usbmisc";
 553                                 reg = <0x53ff4600 0x00f>;
 554                         };
 555
 556                         dryice@53ffc000 {
 557                                 compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
 558                                 reg = <0x53ffc000 0x4000>;
 559                                 clocks = <&clks 81>;
 560                                 clock-names = "ipg";
 561                                 interrupts = <25>;
 562                         };
 563                 };
 564
 565                 iram: sram@78000000 {
 566                         compatible = "mmio-sram";
 567                         reg = <0x78000000 0x20000>;
 568                 };
 569
 570                 emi@80000000 {
 571                         compatible = "fsl,emi-bus", "simple-bus";
 572                         #address-cells = <1>;
 573                         #size-cells = <1>;
 574                         reg = <0x80000000 0x3b002000>;
 575                         ranges;
 576
 577                         nfc: nand@bb000000 {
 578                                 #address-cells = <1>;
 579                                 #size-cells = <1>;
 580
 581                                 compatible = "fsl,imx25-nand";
 582                                 reg = <0xbb000000 0x2000>;
 583                                 clocks = <&clks 50>;
 584                                 clock-names = "";
 585                                 interrupts = <33>;
 586                                 status = "disabled";
 587                         };
 588                 };
 589         };
 590
 591         usbphy {
 592                 compatible = "simple-bus";
 593                 #address-cells = <1>;
 594                 #size-cells = <0>;
 595
 596                 usbphy0: usb-phy@0 {
 597                         reg = <0>;
 598                         compatible = "usb-nop-xceiv";
 599                 };
 600
 601                 usbphy1: usb-phy@1 {
 602                         reg = <1>;
 603                         compatible = "usb-nop-xceiv";
 604                 };
 605         };
 606 };