arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 gpio0 = &gpio0;
  19                 gpio1 = &gpio1;
  20                 gpio2 = &gpio2;
  21                 gpio3 = &gpio3;
  22                 gpio4 = &gpio4;
  23                 saif0 = &saif0;
  24                 saif1 = &saif1;
  25         };
  26
  27         cpus {
  28                 cpu@0 {
  29                         compatible = "arm,arm926ejs";
  30                 };
  31         };
  32
  33         apb@80000000 {
  34                 compatible = "simple-bus";
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37                 reg = <0x80000000 0x80000>;
  38                 ranges;
  39
  40                 apbh@80000000 {
  41                         compatible = "simple-bus";
  42                         #address-cells = <1>;
  43                         #size-cells = <1>;
  44                         reg = <0x80000000 0x3c900>;
  45                         ranges;
  46
  47                         icoll: interrupt-controller@80000000 {
  48                                 compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
  49                                 interrupt-controller;
  50                                 #interrupt-cells = <1>;
  51                                 reg = <0x80000000 0x2000>;
  52                         };
  53
  54                         hsadc@80002000 {
  55                                 reg = <0x80002000 2000>;
  56                                 interrupts = <13 87>;
  57                                 status = "disabled";
  58                         };
  59
  60                         dma-apbh@80004000 {
  61                                 compatible = "fsl,imx28-dma-apbh";
  62                                 reg = <0x80004000 2000>;
  63                         };
  64
  65                         perfmon@80006000 {
  66                                 reg = <0x80006000 800>;
  67                                 interrupts = <27>;
  68                                 status = "disabled";
  69                         };
  70
  71                         bch@8000a000 {
  72                                 reg = <0x8000a000 2000>;
  73                                 interrupts = <41>;
  74                                 status = "disabled";
  75                         };
  76
  77                         gpmi@8000c000 {
  78                                 reg = <0x8000c000 2000>;
  79                                 interrupts = <42 88>;
  80                                 status = "disabled";
  81                         };
  82
  83                         ssp0: ssp@80010000 {
  84                                 reg = <0x80010000 2000>;
  85                                 interrupts = <96 82>;
  86                                 fsl,ssp-dma-channel = <0>;
  87                                 status = "disabled";
  88                         };
  89
  90                         ssp1: ssp@80012000 {
  91                                 reg = <0x80012000 2000>;
  92                                 interrupts = <97 83>;
  93                                 fsl,ssp-dma-channel = <1>;
  94                                 status = "disabled";
  95                         };
  96
  97                         ssp2: ssp@80014000 {
  98                                 reg = <0x80014000 2000>;
  99                                 interrupts = <98 84>;
 100                                 fsl,ssp-dma-channel = <2>;
 101                                 status = "disabled";
 102                         };
 103
 104                         ssp3: ssp@80016000 {
 105                                 reg = <0x80016000 2000>;
 106                                 interrupts = <99 85>;
 107                                 fsl,ssp-dma-channel = <3>;
 108                                 status = "disabled";
 109                         };
 110
 111                         pinctrl@80018000 {
 112                                 #address-cells = <1>;
 113                                 #size-cells = <0>;
 114                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 115                                 reg = <0x80018000 2000>;
 116
 117                                 gpio0: gpio@0 {
 118                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 119                                         interrupts = <127>;
 120                                         gpio-controller;
 121                                         #gpio-cells = <2>;
 122                                         interrupt-controller;
 123                                         #interrupt-cells = <2>;
 124                                 };
 125
 126                                 gpio1: gpio@1 {
 127                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 128                                         interrupts = <126>;
 129                                         gpio-controller;
 130                                         #gpio-cells = <2>;
 131                                         interrupt-controller;
 132                                         #interrupt-cells = <2>;
 133                                 };
 134
 135                                 gpio2: gpio@2 {
 136                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 137                                         interrupts = <125>;
 138                                         gpio-controller;
 139                                         #gpio-cells = <2>;
 140                                         interrupt-controller;
 141                                         #interrupt-cells = <2>;
 142                                 };
 143
 144                                 gpio3: gpio@3 {
 145                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 146                                         interrupts = <124>;
 147                                         gpio-controller;
 148                                         #gpio-cells = <2>;
 149                                         interrupt-controller;
 150                                         #interrupt-cells = <2>;
 151                                 };
 152
 153                                 gpio4: gpio@4 {
 154                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 155                                         interrupts = <123>;
 156                                         gpio-controller;
 157                                         #gpio-cells = <2>;
 158                                         interrupt-controller;
 159                                         #interrupt-cells = <2>;
 160                                 };
 161
 162                                 duart_pins_a: duart@0 {
 163                                         reg = <0>;
 164                                         fsl,pinmux-ids = <0x3102 0x3112>;
 165                                         fsl,drive-strength = <0>;
 166                                         fsl,voltage = <1>;
 167                                         fsl,pull-up = <0>;
 168                                 };
 169
 170                                 mac0_pins_a: mac0@0 {
 171                                         reg = <0>;
 172                                         fsl,pinmux-ids = <0x4000 0x4010 0x4020
 173                                                 0x4030 0x4040 0x4060 0x4070
 174                                                 0x4080 0x4100>;
 175                                         fsl,drive-strength = <1>;
 176                                         fsl,voltage = <1>;
 177                                         fsl,pull-up = <1>;
 178                                 };
 179
 180                                 mac1_pins_a: mac1@0 {
 181                                         reg = <0>;
 182                                         fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
 183                                                 0x40e1 0x40b1 0x40c1>;
 184                                         fsl,drive-strength = <1>;
 185                                         fsl,voltage = <1>;
 186                                         fsl,pull-up = <1>;
 187                                 };
 188
 189                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 190                                         reg = <0>;
 191                                         fsl,pinmux-ids = <0x2000 0x2010 0x2020
 192                                                 0x2030 0x2040 0x2050 0x2060
 193                                                 0x2070 0x2080 0x2090 0x20a0>;
 194                                         fsl,drive-strength = <1>;
 195                                         fsl,voltage = <1>;
 196                                         fsl,pull-up = <1>;
 197                                 };
 198
 199                                 mmc0_cd_cfg: mmc0-cd-cfg {
 200                                         fsl,pinmux-ids = <0x2090>;
 201                                         fsl,pull-up = <0>;
 202                                 };
 203
 204                                 mmc0_sck_cfg: mmc0-sck-cfg {
 205                                         fsl,pinmux-ids = <0x20a0>;
 206                                         fsl,drive-strength = <2>;
 207                                         fsl,pull-up = <0>;
 208                                 };
 209
 210                                 i2c0_pins_a: i2c0@0 {
 211                                         reg = <0>;
 212                                         fsl,pinmux-ids = <0x3180 0x3190>;
 213                                         fsl,drive-strength = <1>;
 214                                         fsl,voltage = <1>;
 215                                         fsl,pull-up = <1>;
 216                                 };
 217
 218                                 saif0_pins_a: saif0@0 {
 219                                         reg = <0>;
 220                                         fsl,pinmux-ids =
 221                                                 <0x3140 0x3150 0x3160 0x3170>;
 222                                         fsl,drive-strength = <2>;
 223                                         fsl,voltage = <1>;
 224                                         fsl,pull-up = <1>;
 225                                 };
 226
 227                                 saif1_pins_a: saif1@0 {
 228                                         reg = <0>;
 229                                         fsl,pinmux-ids = <0x31a0>;
 230                                         fsl,drive-strength = <2>;
 231                                         fsl,voltage = <1>;
 232                                         fsl,pull-up = <1>;
 233                                 };
 234                         };
 235
 236                         digctl@8001c000 {
 237                                 reg = <0x8001c000 2000>;
 238                                 interrupts = <89>;
 239                                 status = "disabled";
 240                         };
 241
 242                         etm@80022000 {
 243                                 reg = <0x80022000 2000>;
 244                                 status = "disabled";
 245                         };
 246
 247                         dma-apbx@80024000 {
 248                                 compatible = "fsl,imx28-dma-apbx";
 249                                 reg = <0x80024000 2000>;
 250                         };
 251
 252                         dcp@80028000 {
 253                                 reg = <0x80028000 2000>;
 254                                 interrupts = <52 53 54>;
 255                                 status = "disabled";
 256                         };
 257
 258                         pxp@8002a000 {
 259                                 reg = <0x8002a000 2000>;
 260                                 interrupts = <39>;
 261                                 status = "disabled";
 262                         };
 263
 264                         ocotp@8002c000 {
 265                                 reg = <0x8002c000 2000>;
 266                                 status = "disabled";
 267                         };
 268
 269                         axi-ahb@8002e000 {
 270                                 reg = <0x8002e000 2000>;
 271                                 status = "disabled";
 272                         };
 273
 274                         lcdif@80030000 {
 275                                 reg = <0x80030000 2000>;
 276                                 interrupts = <38 86>;
 277                                 status = "disabled";
 278                         };
 279
 280                         can0: can@80032000 {
 281                                 reg = <0x80032000 2000>;
 282                                 interrupts = <8>;
 283                                 status = "disabled";
 284                         };
 285
 286                         can1: can@80034000 {
 287                                 reg = <0x80034000 2000>;
 288                                 interrupts = <9>;
 289                                 status = "disabled";
 290                         };
 291
 292                         simdbg@8003c000 {
 293                                 reg = <0x8003c000 200>;
 294                                 status = "disabled";
 295                         };
 296
 297                         simgpmisel@8003c200 {
 298                                 reg = <0x8003c200 100>;
 299                                 status = "disabled";
 300                         };
 301
 302                         simsspsel@8003c300 {
 303                                 reg = <0x8003c300 100>;
 304                                 status = "disabled";
 305                         };
 306
 307                         simmemsel@8003c400 {
 308                                 reg = <0x8003c400 100>;
 309                                 status = "disabled";
 310                         };
 311
 312                         gpiomon@8003c500 {
 313                                 reg = <0x8003c500 100>;
 314                                 status = "disabled";
 315                         };
 316
 317                         simenet@8003c700 {
 318                                 reg = <0x8003c700 100>;
 319                                 status = "disabled";
 320                         };
 321
 322                         armjtag@8003c800 {
 323                                 reg = <0x8003c800 100>;
 324                                 status = "disabled";
 325                         };
 326                 };
 327
 328                 apbx@80040000 {
 329                         compatible = "simple-bus";
 330                         #address-cells = <1>;
 331                         #size-cells = <1>;
 332                         reg = <0x80040000 0x40000>;
 333                         ranges;
 334
 335                         clkctl@80040000 {
 336                                 reg = <0x80040000 2000>;
 337                                 status = "disabled";
 338                         };
 339
 340                         saif0: saif@80042000 {
 341                                 compatible = "fsl,imx28-saif";
 342                                 reg = <0x80042000 2000>;
 343                                 interrupts = <59 80>;
 344                                 fsl,saif-dma-channel = <4>;
 345                                 status = "disabled";
 346                         };
 347
 348                         power@80044000 {
 349                                 reg = <0x80044000 2000>;
 350                                 status = "disabled";
 351                         };
 352
 353                         saif1: saif@80046000 {
 354                                 compatible = "fsl,imx28-saif";
 355                                 reg = <0x80046000 2000>;
 356                                 interrupts = <58 81>;
 357                                 fsl,saif-dma-channel = <5>;
 358                                 status = "disabled";
 359                         };
 360
 361                         lradc@80050000 {
 362                                 reg = <0x80050000 2000>;
 363                                 status = "disabled";
 364                         };
 365
 366                         spdif@80054000 {
 367                                 reg = <0x80054000 2000>;
 368                                 interrupts = <45 66>;
 369                                 status = "disabled";
 370                         };
 371
 372                         rtc@80056000 {
 373                                 reg = <0x80056000 2000>;
 374                                 interrupts = <28 29>;
 375                                 status = "disabled";
 376                         };
 377
 378                         i2c0: i2c@80058000 {
 379                                 #address-cells = <1>;
 380                                 #size-cells = <0>;
 381                                 compatible = "fsl,imx28-i2c";
 382                                 reg = <0x80058000 2000>;
 383                                 interrupts = <111 68>;
 384                                 status = "disabled";
 385                         };
 386
 387                         i2c1: i2c@8005a000 {
 388                                 #address-cells = <1>;
 389                                 #size-cells = <0>;
 390                                 compatible = "fsl,imx28-i2c";
 391                                 reg = <0x8005a000 2000>;
 392                                 interrupts = <110 69>;
 393                                 status = "disabled";
 394                         };
 395
 396                         pwm@80064000 {
 397                                 reg = <0x80064000 2000>;
 398                                 status = "disabled";
 399                         };
 400
 401                         timrot@80068000 {
 402                                 reg = <0x80068000 2000>;
 403                                 status = "disabled";
 404                         };
 405
 406                         auart0: serial@8006a000 {
 407                                 reg = <0x8006a000 0x2000>;
 408                                 interrupts = <112 70 71>;
 409                                 status = "disabled";
 410                         };
 411
 412                         auart1: serial@8006c000 {
 413                                 reg = <0x8006c000 0x2000>;
 414                                 interrupts = <113 72 73>;
 415                                 status = "disabled";
 416                         };
 417
 418                         auart2: serial@8006e000 {
 419                                 reg = <0x8006e000 0x2000>;
 420                                 interrupts = <114 74 75>;
 421                                 status = "disabled";
 422                         };
 423
 424                         auart3: serial@80070000 {
 425                                 reg = <0x80070000 0x2000>;
 426                                 interrupts = <115 76 77>;
 427                                 status = "disabled";
 428                         };
 429
 430                         auart4: serial@80072000 {
 431                                 reg = <0x80072000 0x2000>;
 432                                 interrupts = <116 78 79>;
 433                                 status = "disabled";
 434                         };
 435
 436                         duart: serial@80074000 {
 437                                 compatible = "arm,pl011", "arm,primecell";
 438                                 reg = <0x80074000 0x1000>;
 439                                 interrupts = <47>;
 440                                 status = "disabled";
 441                         };
 442
 443                         usbphy0: usbphy@8007c000 {
 444                                 reg = <0x8007c000 0x2000>;
 445                                 status = "disabled";
 446                         };
 447
 448                         usbphy1: usbphy@8007e000 {
 449                                 reg = <0x8007e000 0x2000>;
 450                                 status = "disabled";
 451                         };
 452                 };
 453         };
 454
 455         ahb@80080000 {
 456                 compatible = "simple-bus";
 457                 #address-cells = <1>;
 458                 #size-cells = <1>;
 459                 reg = <0x80080000 0x80000>;
 460                 ranges;
 461
 462                 usbctrl0: usbctrl@80080000 {
 463                         reg = <0x80080000 0x10000>;
 464                         status = "disabled";
 465                 };
 466
 467                 usbctrl1: usbctrl@80090000 {
 468                         reg = <0x80090000 0x10000>;
 469                         status = "disabled";
 470                 };
 471
 472                 dflpt@800c0000 {
 473                         reg = <0x800c0000 0x10000>;
 474                         status = "disabled";
 475                 };
 476
 477                 mac0: ethernet@800f0000 {
 478                         compatible = "fsl,imx28-fec";
 479                         reg = <0x800f0000 0x4000>;
 480                         interrupts = <101>;
 481                         status = "disabled";
 482                 };
 483
 484                 mac1: ethernet@800f4000 {
 485                         compatible = "fsl,imx28-fec";
 486                         reg = <0x800f4000 0x4000>;
 487                         interrupts = <102>;
 488                         status = "disabled";
 489                 };
 490
 491                 switch@800f8000 {
 492                         reg = <0x800f8000 0x8000>;
 493                         status = "disabled";
 494                 };
 495
 496         };
 497 };