projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
ARM: mvebu: add crypto related nodes to armada-xp.dtsi
[deliverable/linux.git] / arch / arm / boot / dts / imx53.dtsi
1 /*
2 * Copyright 2011 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
4 *
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
8 *
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
11 */
12
13 #include "skeleton.dtsi"
14 #include "imx53-pinfunc.h"
15 #include <dt-bindings/clock/imx5-clock.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/input/input.h>
18
19 / {
20 aliases {
21 ethernet0 = &fec;
22 gpio0 = &gpio1;
23 gpio1 = &gpio2;
24 gpio2 = &gpio3;
25 gpio3 = &gpio4;
26 gpio4 = &gpio5;
27 gpio5 = &gpio6;
28 gpio6 = &gpio7;
29 i2c0 = &i2c1;
30 i2c1 = &i2c2;
31 i2c2 = &i2c3;
32 mmc0 = &esdhc1;
33 mmc1 = &esdhc2;
34 mmc2 = &esdhc3;
35 mmc3 = &esdhc4;
36 serial0 = &uart1;
37 serial1 = &uart2;
38 serial2 = &uart3;
39 serial3 = &uart4;
40 serial4 = &uart5;
41 spi0 = &ecspi1;
42 spi1 = &ecspi2;
43 spi2 = &cspi;
44 };
45
46 cpus {
47 #address-cells = <1>;
48 #size-cells = <0>;
49 cpu0: cpu@0 {
50 device_type = "cpu";
51 compatible = "arm,cortex-a8";
52 reg = <0x0>;
53 clocks = <&clks IMX5_CLK_ARM>;
54 clock-latency = <61036>;
55 voltage-tolerance = <5>;
56 operating-points = <
57 /* kHz */
58 166666 850000
59 400000 900000
60 800000 1050000
61 1000000 1200000
62 1200000 1300000
63 >;
64 };
65 };
66
67 display-subsystem {
68 compatible = "fsl,imx-display-subsystem";
69 ports = <&ipu_di0>, <&ipu_di1>;
70 };
71
72 tzic: tz-interrupt-controller@0fffc000 {
73 compatible = "fsl,imx53-tzic", "fsl,tzic";
74 interrupt-controller;
75 #interrupt-cells = <1>;
76 reg = <0x0fffc000 0x4000>;
77 };
78
79 clocks {
80 #address-cells = <1>;
81 #size-cells = <0>;
82
83 ckil {
84 compatible = "fsl,imx-ckil", "fixed-clock";
85 #clock-cells = <0>;
86 clock-frequency = <32768>;
87 };
88
89 ckih1 {
90 compatible = "fsl,imx-ckih1", "fixed-clock";
91 #clock-cells = <0>;
92 clock-frequency = <22579200>;
93 };
94
95 ckih2 {
96 compatible = "fsl,imx-ckih2", "fixed-clock";
97 #clock-cells = <0>;
98 clock-frequency = <0>;
99 };
100
101 osc {
102 compatible = "fsl,imx-osc", "fixed-clock";
103 #clock-cells = <0>;
104 clock-frequency = <24000000>;
105 };
106 };
107
108 soc {
109 #address-cells = <1>;
110 #size-cells = <1>;
111 compatible = "simple-bus";
112 interrupt-parent = <&tzic>;
113 ranges;
114
115 sata: sata@10000000 {
116 compatible = "fsl,imx53-ahci";
117 reg = <0x10000000 0x1000>;
118 interrupts = <28>;
119 clocks = <&clks IMX5_CLK_SATA_GATE>,
120 <&clks IMX5_CLK_SATA_REF>,
121 <&clks IMX5_CLK_AHB>;
122 clock-names = "sata", "sata_ref", "ahb";
123 status = "disabled";
124 };
125
126 ipu: ipu@18000000 {
127 #address-cells = <1>;
128 #size-cells = <0>;
129 compatible = "fsl,imx53-ipu";
130 reg = <0x18000000 0x08000000>;
131 interrupts = <11 10>;
132 clocks = <&clks IMX5_CLK_IPU_GATE>,
133 <&clks IMX5_CLK_IPU_DI0_GATE>,
134 <&clks IMX5_CLK_IPU_DI1_GATE>;
135 clock-names = "bus", "di0", "di1";
136 resets = <&src 2>;
137
138 ipu_di0: port@2 {
139 #address-cells = <1>;
140 #size-cells = <0>;
141 reg = <2>;
142
143 ipu_di0_disp0: endpoint@0 {
144 reg = <0>;
145 };
146
147 ipu_di0_lvds0: endpoint@1 {
148 reg = <1>;
149 remote-endpoint = <&lvds0_in>;
150 };
151 };
152
153 ipu_di1: port@3 {
154 #address-cells = <1>;
155 #size-cells = <0>;
156 reg = <3>;
157
158 ipu_di1_disp1: endpoint@0 {
159 reg = <0>;
160 };
161
162 ipu_di1_lvds1: endpoint@1 {
163 reg = <1>;
164 remote-endpoint = <&lvds1_in>;
165 };
166
167 ipu_di1_tve: endpoint@2 {
168 reg = <2>;
169 remote-endpoint = <&tve_in>;
170 };
171 };
172 };
173
174 aips@50000000 { /* AIPS1 */
175 compatible = "fsl,aips-bus", "simple-bus";
176 #address-cells = <1>;
177 #size-cells = <1>;
178 reg = <0x50000000 0x10000000>;
179 ranges;
180
181 spba@50000000 {
182 compatible = "fsl,spba-bus", "simple-bus";
183 #address-cells = <1>;
184 #size-cells = <1>;
185 reg = <0x50000000 0x40000>;
186 ranges;
187
188 esdhc1: esdhc@50004000 {
189 compatible = "fsl,imx53-esdhc";
190 reg = <0x50004000 0x4000>;
191 interrupts = <1>;
192 clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
193 <&clks IMX5_CLK_DUMMY>,
194 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
195 clock-names = "ipg", "ahb", "per";
196 bus-width = <4>;
197 status = "disabled";
198 };
199
200 esdhc2: esdhc@50008000 {
201 compatible = "fsl,imx53-esdhc";
202 reg = <0x50008000 0x4000>;
203 interrupts = <2>;
204 clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
205 <&clks IMX5_CLK_DUMMY>,
206 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
207 clock-names = "ipg", "ahb", "per";
208 bus-width = <4>;
209 status = "disabled";
210 };
211
212 uart3: serial@5000c000 {
213 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
214 reg = <0x5000c000 0x4000>;
215 interrupts = <33>;
216 clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
217 <&clks IMX5_CLK_UART3_PER_GATE>;
218 clock-names = "ipg", "per";
219 status = "disabled";
220 };
221
222 ecspi1: ecspi@50010000 {
223 #address-cells = <1>;
224 #size-cells = <0>;
225 compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
226 reg = <0x50010000 0x4000>;
227 interrupts = <36>;
228 clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
229 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
230 clock-names = "ipg", "per";
231 status = "disabled";
232 };
233
234 ssi2: ssi@50014000 {
235 #sound-dai-cells = <0>;
236 compatible = "fsl,imx53-ssi",
237 "fsl,imx51-ssi",
238 "fsl,imx21-ssi";
239 reg = <0x50014000 0x4000>;
240 interrupts = <30>;
241 clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
242 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
243 clock-names = "ipg", "baud";
244 dmas = <&sdma 24 1 0>,
245 <&sdma 25 1 0>;
246 dma-names = "rx", "tx";
247 fsl,fifo-depth = <15>;
248 status = "disabled";
249 };
250
251 esdhc3: esdhc@50020000 {
252 compatible = "fsl,imx53-esdhc";
253 reg = <0x50020000 0x4000>;
254 interrupts = <3>;
255 clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
256 <&clks IMX5_CLK_DUMMY>,
257 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
258 clock-names = "ipg", "ahb", "per";
259 bus-width = <4>;
260 status = "disabled";
261 };
262
263 esdhc4: esdhc@50024000 {
264 compatible = "fsl,imx53-esdhc";
265 reg = <0x50024000 0x4000>;
266 interrupts = <4>;
267 clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
268 <&clks IMX5_CLK_DUMMY>,
269 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
270 clock-names = "ipg", "ahb", "per";
271 bus-width = <4>;
272 status = "disabled";
273 };
274 };
275
276 aipstz1: bridge@53f00000 {
277 compatible = "fsl,imx53-aipstz";
278 reg = <0x53f00000 0x60>;
279 };
280
281 usbphy0: usbphy@0 {
282 compatible = "usb-nop-xceiv";
283 clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
284 clock-names = "main_clk";
285 status = "okay";
286 };
287
288 usbphy1: usbphy@1 {
289 compatible = "usb-nop-xceiv";
290 clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
291 clock-names = "main_clk";
292 status = "okay";
293 };
294
295 usbotg: usb@53f80000 {
296 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
297 reg = <0x53f80000 0x0200>;
298 interrupts = <18>;
299 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
300 fsl,usbmisc = <&usbmisc 0>;
301 fsl,usbphy = <&usbphy0>;
302 status = "disabled";
303 };
304
305 usbh1: usb@53f80200 {
306 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
307 reg = <0x53f80200 0x0200>;
308 interrupts = <14>;
309 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
310 fsl,usbmisc = <&usbmisc 1>;
311 fsl,usbphy = <&usbphy1>;
312 dr_mode = "host";
313 status = "disabled";
314 };
315
316 usbh2: usb@53f80400 {
317 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
318 reg = <0x53f80400 0x0200>;
319 interrupts = <16>;
320 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
321 fsl,usbmisc = <&usbmisc 2>;
322 dr_mode = "host";
323 status = "disabled";
324 };
325
326 usbh3: usb@53f80600 {
327 compatible = "fsl,imx53-usb", "fsl,imx27-usb";
328 reg = <0x53f80600 0x0200>;
329 interrupts = <17>;
330 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
331 fsl,usbmisc = <&usbmisc 3>;
332 dr_mode = "host";
333 status = "disabled";
334 };
335
336 usbmisc: usbmisc@53f80800 {
337 #index-cells = <1>;
338 compatible = "fsl,imx53-usbmisc";
339 reg = <0x53f80800 0x200>;
340 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
341 };
342
343 gpio1: gpio@53f84000 {
344 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
345 reg = <0x53f84000 0x4000>;
346 interrupts = <50 51>;
347 gpio-controller;
348 #gpio-cells = <2>;
349 interrupt-controller;
350 #interrupt-cells = <2>;
351 };
352
353 gpio2: gpio@53f88000 {
354 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
355 reg = <0x53f88000 0x4000>;
356 interrupts = <52 53>;
357 gpio-controller;
358 #gpio-cells = <2>;
359 interrupt-controller;
360 #interrupt-cells = <2>;
361 };
362
363 gpio3: gpio@53f8c000 {
364 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
365 reg = <0x53f8c000 0x4000>;
366 interrupts = <54 55>;
367 gpio-controller;
368 #gpio-cells = <2>;
369 interrupt-controller;
370 #interrupt-cells = <2>;
371 };
372
373 gpio4: gpio@53f90000 {
374 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
375 reg = <0x53f90000 0x4000>;
376 interrupts = <56 57>;
377 gpio-controller;
378 #gpio-cells = <2>;
379 interrupt-controller;
380 #interrupt-cells = <2>;
381 };
382
383 kpp: kpp@53f94000 {
384 compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
385 reg = <0x53f94000 0x4000>;
386 interrupts = <60>;
387 clocks = <&clks IMX5_CLK_DUMMY>;
388 status = "disabled";
389 };
390
391 wdog1: wdog@53f98000 {
392 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
393 reg = <0x53f98000 0x4000>;
394 interrupts = <58>;
395 clocks = <&clks IMX5_CLK_DUMMY>;
396 };
397
398 wdog2: wdog@53f9c000 {
399 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
400 reg = <0x53f9c000 0x4000>;
401 interrupts = <59>;
402 clocks = <&clks IMX5_CLK_DUMMY>;
403 status = "disabled";
404 };
405
406 gpt: timer@53fa0000 {
407 compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
408 reg = <0x53fa0000 0x4000>;
409 interrupts = <39>;
410 clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
411 <&clks IMX5_CLK_GPT_HF_GATE>;
412 clock-names = "ipg", "per";
413 };
414
415 iomuxc: iomuxc@53fa8000 {
416 compatible = "fsl,imx53-iomuxc";
417 reg = <0x53fa8000 0x4000>;
418 };
419
420 gpr: iomuxc-gpr@53fa8000 {
421 compatible = "fsl,imx53-iomuxc-gpr", "syscon";
422 reg = <0x53fa8000 0xc>;
423 };
424
425 ldb: ldb@53fa8008 {
426 #address-cells = <1>;
427 #size-cells = <0>;
428 compatible = "fsl,imx53-ldb";
429 reg = <0x53fa8008 0x4>;
430 gpr = <&gpr>;
431 clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
432 <&clks IMX5_CLK_LDB_DI1_SEL>,
433 <&clks IMX5_CLK_IPU_DI0_SEL>,
434 <&clks IMX5_CLK_IPU_DI1_SEL>,
435 <&clks IMX5_CLK_LDB_DI0_GATE>,
436 <&clks IMX5_CLK_LDB_DI1_GATE>;
437 clock-names = "di0_pll", "di1_pll",
438 "di0_sel", "di1_sel",
439 "di0", "di1";
440 status = "disabled";
441
442 lvds-channel@0 {
443 #address-cells = <1>;
444 #size-cells = <0>;
445 reg = <0>;
446 status = "disabled";
447
448 port@0 {
449 reg = <0>;
450
451 lvds0_in: endpoint {
452 remote-endpoint = <&ipu_di0_lvds0>;
453 };
454 };
455 };
456
457 lvds-channel@1 {
458 #address-cells = <1>;
459 #size-cells = <0>;
460 reg = <1>;
461 status = "disabled";
462
463 port@1 {
464 reg = <1>;
465
466 lvds1_in: endpoint {
467 remote-endpoint = <&ipu_di1_lvds1>;
468 };
469 };
470 };
471 };
472
473 pwm1: pwm@53fb4000 {
474 #pwm-cells = <2>;
475 compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
476 reg = <0x53fb4000 0x4000>;
477 clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
478 <&clks IMX5_CLK_PWM1_HF_GATE>;
479 clock-names = "ipg", "per";
480 interrupts = <61>;
481 };
482
483 pwm2: pwm@53fb8000 {
484 #pwm-cells = <2>;
485 compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
486 reg = <0x53fb8000 0x4000>;
487 clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
488 <&clks IMX5_CLK_PWM2_HF_GATE>;
489 clock-names = "ipg", "per";
490 interrupts = <94>;
491 };
492
493 uart1: serial@53fbc000 {
494 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
495 reg = <0x53fbc000 0x4000>;
496 interrupts = <31>;
497 clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
498 <&clks IMX5_CLK_UART1_PER_GATE>;
499 clock-names = "ipg", "per";
500 status = "disabled";
501 };
502
503 uart2: serial@53fc0000 {
504 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
505 reg = <0x53fc0000 0x4000>;
506 interrupts = <32>;
507 clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
508 <&clks IMX5_CLK_UART2_PER_GATE>;
509 clock-names = "ipg", "per";
510 status = "disabled";
511 };
512
513 can1: can@53fc8000 {
514 compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
515 reg = <0x53fc8000 0x4000>;
516 interrupts = <82>;
517 clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
518 <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
519 clock-names = "ipg", "per";
520 status = "disabled";
521 };
522
523 can2: can@53fcc000 {
524 compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
525 reg = <0x53fcc000 0x4000>;
526 interrupts = <83>;
527 clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
528 <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
529 clock-names = "ipg", "per";
530 status = "disabled";
531 };
532
533 src: src@53fd0000 {
534 compatible = "fsl,imx53-src", "fsl,imx51-src";
535 reg = <0x53fd0000 0x4000>;
536 #reset-cells = <1>;
537 };
538
539 clks: ccm@53fd4000{
540 compatible = "fsl,imx53-ccm";
541 reg = <0x53fd4000 0x4000>;
542 interrupts = <0 71 0x04 0 72 0x04>;
543 #clock-cells = <1>;
544 };
545
546 gpio5: gpio@53fdc000 {
547 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
548 reg = <0x53fdc000 0x4000>;
549 interrupts = <103 104>;
550 gpio-controller;
551 #gpio-cells = <2>;
552 interrupt-controller;
553 #interrupt-cells = <2>;
554 };
555
556 gpio6: gpio@53fe0000 {
557 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
558 reg = <0x53fe0000 0x4000>;
559 interrupts = <105 106>;
560 gpio-controller;
561 #gpio-cells = <2>;
562 interrupt-controller;
563 #interrupt-cells = <2>;
564 };
565
566 gpio7: gpio@53fe4000 {
567 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
568 reg = <0x53fe4000 0x4000>;
569 interrupts = <107 108>;
570 gpio-controller;
571 #gpio-cells = <2>;
572 interrupt-controller;
573 #interrupt-cells = <2>;
574 };
575
576 i2c3: i2c@53fec000 {
577 #address-cells = <1>;
578 #size-cells = <0>;
579 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
580 reg = <0x53fec000 0x4000>;
581 interrupts = <64>;
582 clocks = <&clks IMX5_CLK_I2C3_GATE>;
583 status = "disabled";
584 };
585
586 uart4: serial@53ff0000 {
587 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
588 reg = <0x53ff0000 0x4000>;
589 interrupts = <13>;
590 clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
591 <&clks IMX5_CLK_UART4_PER_GATE>;
592 clock-names = "ipg", "per";
593 status = "disabled";
594 };
595 };
596
597 aips@60000000 { /* AIPS2 */
598 compatible = "fsl,aips-bus", "simple-bus";
599 #address-cells = <1>;
600 #size-cells = <1>;
601 reg = <0x60000000 0x10000000>;
602 ranges;
603
604 aipstz2: bridge@63f00000 {
605 compatible = "fsl,imx53-aipstz";
606 reg = <0x63f00000 0x60>;
607 };
608
609 iim: iim@63f98000 {
610 compatible = "fsl,imx53-iim", "fsl,imx27-iim";
611 reg = <0x63f98000 0x4000>;
612 interrupts = <69>;
613 clocks = <&clks IMX5_CLK_IIM_GATE>;
614 };
615
616 uart5: serial@63f90000 {
617 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
618 reg = <0x63f90000 0x4000>;
619 interrupts = <86>;
620 clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
621 <&clks IMX5_CLK_UART5_PER_GATE>;
622 clock-names = "ipg", "per";
623 status = "disabled";
624 };
625
626 owire: owire@63fa4000 {
627 compatible = "fsl,imx53-owire", "fsl,imx21-owire";
628 reg = <0x63fa4000 0x4000>;
629 clocks = <&clks IMX5_CLK_OWIRE_GATE>;
630 status = "disabled";
631 };
632
633 ecspi2: ecspi@63fac000 {
634 #address-cells = <1>;
635 #size-cells = <0>;
636 compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
637 reg = <0x63fac000 0x4000>;
638 interrupts = <37>;
639 clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
640 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
641 clock-names = "ipg", "per";
642 status = "disabled";
643 };
644
645 sdma: sdma@63fb0000 {
646 compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
647 reg = <0x63fb0000 0x4000>;
648 interrupts = <6>;
649 clocks = <&clks IMX5_CLK_SDMA_GATE>,
650 <&clks IMX5_CLK_SDMA_GATE>;
651 clock-names = "ipg", "ahb";
652 #dma-cells = <3>;
653 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
654 };
655
656 cspi: cspi@63fc0000 {
657 #address-cells = <1>;
658 #size-cells = <0>;
659 compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
660 reg = <0x63fc0000 0x4000>;
661 interrupts = <38>;
662 clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
663 <&clks IMX5_CLK_CSPI_IPG_GATE>;
664 clock-names = "ipg", "per";
665 status = "disabled";
666 };
667
668 i2c2: i2c@63fc4000 {
669 #address-cells = <1>;
670 #size-cells = <0>;
671 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
672 reg = <0x63fc4000 0x4000>;
673 interrupts = <63>;
674 clocks = <&clks IMX5_CLK_I2C2_GATE>;
675 status = "disabled";
676 };
677
678 i2c1: i2c@63fc8000 {
679 #address-cells = <1>;
680 #size-cells = <0>;
681 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
682 reg = <0x63fc8000 0x4000>;
683 interrupts = <62>;
684 clocks = <&clks IMX5_CLK_I2C1_GATE>;
685 status = "disabled";
686 };
687
688 ssi1: ssi@63fcc000 {
689 #sound-dai-cells = <0>;
690 compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
691 "fsl,imx21-ssi";
692 reg = <0x63fcc000 0x4000>;
693 interrupts = <29>;
694 clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
695 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
696 clock-names = "ipg", "baud";
697 dmas = <&sdma 28 0 0>,
698 <&sdma 29 0 0>;
699 dma-names = "rx", "tx";
700 fsl,fifo-depth = <15>;
701 status = "disabled";
702 };
703
704 audmux: audmux@63fd0000 {
705 compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
706 reg = <0x63fd0000 0x4000>;
707 status = "disabled";
708 };
709
710 nfc: nand@63fdb000 {
711 compatible = "fsl,imx53-nand";
712 reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
713 interrupts = <8>;
714 clocks = <&clks IMX5_CLK_NFC_GATE>;
715 status = "disabled";
716 };
717
718 ssi3: ssi@63fe8000 {
719 #sound-dai-cells = <0>;
720 compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
721 "fsl,imx21-ssi";
722 reg = <0x63fe8000 0x4000>;
723 interrupts = <96>;
724 clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
725 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
726 clock-names = "ipg", "baud";
727 dmas = <&sdma 46 0 0>,
728 <&sdma 47 0 0>;
729 dma-names = "rx", "tx";
730 fsl,fifo-depth = <15>;
731 status = "disabled";
732 };
733
734 fec: ethernet@63fec000 {
735 compatible = "fsl,imx53-fec", "fsl,imx25-fec";
736 reg = <0x63fec000 0x4000>;
737 interrupts = <87>;
738 clocks = <&clks IMX5_CLK_FEC_GATE>,
739 <&clks IMX5_CLK_FEC_GATE>,
740 <&clks IMX5_CLK_FEC_GATE>;
741 clock-names = "ipg", "ahb", "ptp";
742 status = "disabled";
743 };
744
745 tve: tve@63ff0000 {
746 compatible = "fsl,imx53-tve";
747 reg = <0x63ff0000 0x1000>;
748 interrupts = <92>;
749 clocks = <&clks IMX5_CLK_TVE_GATE>,
750 <&clks IMX5_CLK_IPU_DI1_SEL>;
751 clock-names = "tve", "di_sel";
752 status = "disabled";
753
754 port {
755 tve_in: endpoint {
756 remote-endpoint = <&ipu_di1_tve>;
757 };
758 };
759 };
760
761 vpu: vpu@63ff4000 {
762 compatible = "fsl,imx53-vpu", "cnm,coda7541";
763 reg = <0x63ff4000 0x1000>;
764 interrupts = <9>;
765 clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
766 <&clks IMX5_CLK_VPU_GATE>;
767 clock-names = "per", "ahb";
768 resets = <&src 1>;
769 iram = <&ocram>;
770 };
771
772 sahara: crypto@63ff8000 {
773 compatible = "fsl,imx53-sahara";
774 reg = <0x63ff8000 0x4000>;
775 interrupts = <19 20>;
776 clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
777 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
778 clock-names = "ipg", "ahb";
779 };
780 };
781
782 ocram: sram@f8000000 {
783 compatible = "mmio-sram";
784 reg = <0xf8000000 0x20000>;
785 clocks = <&clks IMX5_CLK_OCRAM>;
786 };
787
788 pmu {
789 compatible = "arm,cortex-a8-pmu";
790 interrupts = <77>;
791 };
792 };
793 };
Linux kernel - Deliverables
This page took 0.046893 seconds and 5 git commands to generate.