arch/arm/boot/dts/imx53.dtsi

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 /include/ "skeleton.dtsi"
  14
  15 / {
  16         aliases {
  17                 serial0 = &uart1;
  18                 serial1 = &uart2;
  19                 serial2 = &uart3;
  20                 serial3 = &uart4;
  21                 serial4 = &uart5;
  22         };
  23
  24         tzic: tz-interrupt-controller@0fffc000 {
  25                 compatible = "fsl,imx53-tzic", "fsl,tzic";
  26                 interrupt-controller;
  27                 #interrupt-cells = <1>;
  28                 reg = <0x0fffc000 0x4000>;
  29         };
  30
  31         clocks {
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34
  35                 ckil {
  36                         compatible = "fsl,imx-ckil", "fixed-clock";
  37                         clock-frequency = <32768>;
  38                 };
  39
  40                 ckih1 {
  41                         compatible = "fsl,imx-ckih1", "fixed-clock";
  42                         clock-frequency = <22579200>;
  43                 };
  44
  45                 ckih2 {
  46                         compatible = "fsl,imx-ckih2", "fixed-clock";
  47                         clock-frequency = <0>;
  48                 };
  49
  50                 osc {
  51                         compatible = "fsl,imx-osc", "fixed-clock";
  52                         clock-frequency = <24000000>;
  53                 };
  54         };
  55
  56         soc {
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59                 compatible = "simple-bus";
  60                 interrupt-parent = <&tzic>;
  61                 ranges;
  62
  63                 aips@50000000 { /* AIPS1 */
  64                         compatible = "fsl,aips-bus", "simple-bus";
  65                         #address-cells = <1>;
  66                         #size-cells = <1>;
  67                         reg = <0x50000000 0x10000000>;
  68                         ranges;
  69
  70                         spba@50000000 {
  71                                 compatible = "fsl,spba-bus", "simple-bus";
  72                                 #address-cells = <1>;
  73                                 #size-cells = <1>;
  74                                 reg = <0x50000000 0x40000>;
  75                                 ranges;
  76
  77                                 esdhc@50004000 { /* ESDHC1 */
  78                                         compatible = "fsl,imx53-esdhc";
  79                                         reg = <0x50004000 0x4000>;
  80                                         interrupts = <1>;
  81                                         status = "disabled";
  82                                 };
  83
  84                                 esdhc@50008000 { /* ESDHC2 */
  85                                         compatible = "fsl,imx53-esdhc";
  86                                         reg = <0x50008000 0x4000>;
  87                                         interrupts = <2>;
  88                                         status = "disabled";
  89                                 };
  90
  91                                 uart3: serial@5000c000 {
  92                                         compatible = "fsl,imx53-uart", "fsl,imx21-uart";
  93                                         reg = <0x5000c000 0x4000>;
  94                                         interrupts = <33>;
  95                                         status = "disabled";
  96                                 };
  97
  98                                 ecspi@50010000 { /* ECSPI1 */
  99                                         #address-cells = <1>;
 100                                         #size-cells = <0>;
 101                                         compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 102                                         reg = <0x50010000 0x4000>;
 103                                         interrupts = <36>;
 104                                         status = "disabled";
 105                                 };
 106
 107                                 ssi2: ssi@50014000 {
 108                                         compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
 109                                         reg = <0x50014000 0x4000>;
 110                                         interrupts = <30>;
 111                                         fsl,fifo-depth = <15>;
 112                                         fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
 113                                         status = "disabled";
 114                                 };
 115
 116                                 esdhc@50020000 { /* ESDHC3 */
 117                                         compatible = "fsl,imx53-esdhc";
 118                                         reg = <0x50020000 0x4000>;
 119                                         interrupts = <3>;
 120                                         status = "disabled";
 121                                 };
 122
 123                                 esdhc@50024000 { /* ESDHC4 */
 124                                         compatible = "fsl,imx53-esdhc";
 125                                         reg = <0x50024000 0x4000>;
 126                                         interrupts = <4>;
 127                                         status = "disabled";
 128                                 };
 129                         };
 130
 131                         gpio1: gpio@53f84000 {
 132                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 133                                 reg = <0x53f84000 0x4000>;
 134                                 interrupts = <50 51>;
 135                                 gpio-controller;
 136                                 #gpio-cells = <2>;
 137                                 interrupt-controller;
 138                                 #interrupt-cells = <2>;
 139                         };
 140
 141                         gpio2: gpio@53f88000 {
 142                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 143                                 reg = <0x53f88000 0x4000>;
 144                                 interrupts = <52 53>;
 145                                 gpio-controller;
 146                                 #gpio-cells = <2>;
 147                                 interrupt-controller;
 148                                 #interrupt-cells = <2>;
 149                         };
 150
 151                         gpio3: gpio@53f8c000 {
 152                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 153                                 reg = <0x53f8c000 0x4000>;
 154                                 interrupts = <54 55>;
 155                                 gpio-controller;
 156                                 #gpio-cells = <2>;
 157                                 interrupt-controller;
 158                                 #interrupt-cells = <2>;
 159                         };
 160
 161                         gpio4: gpio@53f90000 {
 162                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 163                                 reg = <0x53f90000 0x4000>;
 164                                 interrupts = <56 57>;
 165                                 gpio-controller;
 166                                 #gpio-cells = <2>;
 167                                 interrupt-controller;
 168                                 #interrupt-cells = <2>;
 169                         };
 170
 171                         wdog@53f98000 { /* WDOG1 */
 172                                 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 173                                 reg = <0x53f98000 0x4000>;
 174                                 interrupts = <58>;
 175                                 status = "disabled";
 176                         };
 177
 178                         wdog@53f9c000 { /* WDOG2 */
 179                                 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 180                                 reg = <0x53f9c000 0x4000>;
 181                                 interrupts = <59>;
 182                                 status = "disabled";
 183                         };
 184
 185                         uart1: serial@53fbc000 {
 186                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 187                                 reg = <0x53fbc000 0x4000>;
 188                                 interrupts = <31>;
 189                                 status = "disabled";
 190                         };
 191
 192                         uart2: serial@53fc0000 {
 193                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 194                                 reg = <0x53fc0000 0x4000>;
 195                                 interrupts = <32>;
 196                                 status = "disabled";
 197                         };
 198
 199                         gpio5: gpio@53fdc000 {
 200                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 201                                 reg = <0x53fdc000 0x4000>;
 202                                 interrupts = <103 104>;
 203                                 gpio-controller;
 204                                 #gpio-cells = <2>;
 205                                 interrupt-controller;
 206                                 #interrupt-cells = <2>;
 207                         };
 208
 209                         gpio6: gpio@53fe0000 {
 210                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 211                                 reg = <0x53fe0000 0x4000>;
 212                                 interrupts = <105 106>;
 213                                 gpio-controller;
 214                                 #gpio-cells = <2>;
 215                                 interrupt-controller;
 216                                 #interrupt-cells = <2>;
 217                         };
 218
 219                         gpio7: gpio@53fe4000 {
 220                                 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 221                                 reg = <0x53fe4000 0x4000>;
 222                                 interrupts = <107 108>;
 223                                 gpio-controller;
 224                                 #gpio-cells = <2>;
 225                                 interrupt-controller;
 226                                 #interrupt-cells = <2>;
 227                         };
 228
 229                         i2c@53fec000 { /* I2C3 */
 230                                 #address-cells = <1>;
 231                                 #size-cells = <0>;
 232                                 compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
 233                                 reg = <0x53fec000 0x4000>;
 234                                 interrupts = <64>;
 235                                 status = "disabled";
 236                         };
 237
 238                         uart4: serial@53ff0000 {
 239                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 240                                 reg = <0x53ff0000 0x4000>;
 241                                 interrupts = <13>;
 242                                 status = "disabled";
 243                         };
 244                 };
 245
 246                 aips@60000000 { /* AIPS2 */
 247                         compatible = "fsl,aips-bus", "simple-bus";
 248                         #address-cells = <1>;
 249                         #size-cells = <1>;
 250                         reg = <0x60000000 0x10000000>;
 251                         ranges;
 252
 253                         uart5: serial@63f90000 {
 254                                 compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 255                                 reg = <0x63f90000 0x4000>;
 256                                 interrupts = <86>;
 257                                 status = "disabled";
 258                         };
 259
 260                         ecspi@63fac000 { /* ECSPI2 */
 261                                 #address-cells = <1>;
 262                                 #size-cells = <0>;
 263                                 compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 264                                 reg = <0x63fac000 0x4000>;
 265                                 interrupts = <37>;
 266                                 status = "disabled";
 267                         };
 268
 269                         sdma@63fb0000 {
 270                                 compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 271                                 reg = <0x63fb0000 0x4000>;
 272                                 interrupts = <6>;
 273                         };
 274
 275                         cspi@63fc0000 {
 276                                 #address-cells = <1>;
 277                                 #size-cells = <0>;
 278                                 compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
 279                                 reg = <0x63fc0000 0x4000>;
 280                                 interrupts = <38>;
 281                                 status = "disabled";
 282                         };
 283
 284                         i2c@63fc4000 { /* I2C2 */
 285                                 #address-cells = <1>;
 286                                 #size-cells = <0>;
 287                                 compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
 288                                 reg = <0x63fc4000 0x4000>;
 289                                 interrupts = <63>;
 290                                 status = "disabled";
 291                         };
 292
 293                         i2c@63fc8000 { /* I2C1 */
 294                                 #address-cells = <1>;
 295                                 #size-cells = <0>;
 296                                 compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
 297                                 reg = <0x63fc8000 0x4000>;
 298                                 interrupts = <62>;
 299                                 status = "disabled";
 300                         };
 301
 302                         ssi1: ssi@63fcc000 {
 303                                 compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
 304                                 reg = <0x63fcc000 0x4000>;
 305                                 interrupts = <29>;
 306                                 fsl,fifo-depth = <15>;
 307                                 fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
 308                                 status = "disabled";
 309                         };
 310
 311                         audmux@63fd0000 {
 312                                 compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
 313                                 reg = <0x63fd0000 0x4000>;
 314                                 status = "disabled";
 315                         };
 316
 317                         ssi3: ssi@63fe8000 {
 318                                 compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
 319                                 reg = <0x63fe8000 0x4000>;
 320                                 interrupts = <96>;
 321                                 fsl,fifo-depth = <15>;
 322                                 fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
 323                                 status = "disabled";
 324                         };
 325
 326                         ethernet@63fec000 {
 327                                 compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 328                                 reg = <0x63fec000 0x4000>;
 329                                 interrupts = <87>;
 330                                 status = "disabled";
 331                         };
 332                 };
 333         };
 334 };