arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 / {
  14         memory {
  15                 reg = <0x10000000 0x80000000>;
  16         };
  17 };
  18
  19 &ecspi1 {
  20         fsl,spi-num-chipselects = <1>;
  21         cs-gpios = <&gpio3 19 0>;
  22         pinctrl-names = "default";
  23         pinctrl-0 = <&pinctrl_ecspi1_1 &pinctrl_ecspi1_sabreauto>;
  24         status = "disabled"; /* pin conflict with WEIM NOR */
  25
  26         flash: m25p80@0 {
  27                 #address-cells = <1>;
  28                 #size-cells = <1>;
  29                 compatible = "st,m25p32";
  30                 spi-max-frequency = <20000000>;
  31                 reg = <0>;
  32         };
  33 };
  34
  35 &fec {
  36         pinctrl-names = "default";
  37         pinctrl-0 = <&pinctrl_enet_2>;
  38         phy-mode = "rgmii";
  39         status = "okay";
  40 };
  41
  42 &gpmi {
  43         pinctrl-names = "default";
  44         pinctrl-0 = <&pinctrl_gpmi_nand_1>;
  45         status = "okay";
  46 };
  47
  48 &uart4 {
  49         pinctrl-names = "default";
  50         pinctrl-0 = <&pinctrl_uart4_1>;
  51         status = "okay";
  52 };
  53
  54 &usdhc3 {
  55         pinctrl-names = "default";
  56         pinctrl-0 = <&pinctrl_usdhc3_1>;
  57         cd-gpios = <&gpio6 15 0>;
  58         wp-gpios = <&gpio1 13 0>;
  59         status = "okay";
  60 };
  61
  62 &weim {
  63         pinctrl-names = "default";
  64         pinctrl-0 = <&pinctrl_weim_nor_1 &pinctrl_weim_cs0_1>;
  65         #address-cells = <2>;
  66         #size-cells = <1>;
  67         ranges = <0 0 0x08000000 0x08000000>;
  68         status = "disabled"; /* pin conflict with SPI NOR */
  69
  70         nor@0,0 {
  71                 compatible = "cfi-flash";
  72                 reg = <0 0 0x02000000>;
  73                 #address-cells = <1>;
  74                 #size-cells = <1>;
  75                 bank-width = <2>;
  76                 fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
  77                                 0x0000c000 0x1404a38e 0x00000000>;
  78         };
  79 };