arch/arm/boot/dts/imx6qdl-sabresd.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 #include <dt-bindings/gpio/gpio.h>
  14 #include <dt-bindings/input/input.h>
  15
  16 / {
  17         chosen {
  18                 stdout-path = &uart1;
  19         };
  20
  21         memory {
  22                 reg = <0x10000000 0x40000000>;
  23         };
  24
  25         regulators {
  26                 compatible = "simple-bus";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29
  30                 reg_usb_otg_vbus: regulator@0 {
  31                         compatible = "regulator-fixed";
  32                         reg = <0>;
  33                         regulator-name = "usb_otg_vbus";
  34                         regulator-min-microvolt = <5000000>;
  35                         regulator-max-microvolt = <5000000>;
  36                         gpio = <&gpio3 22 0>;
  37                         enable-active-high;
  38                         vin-supply = <&swbst_reg>;
  39                 };
  40
  41                 reg_usb_h1_vbus: regulator@1 {
  42                         compatible = "regulator-fixed";
  43                         reg = <1>;
  44                         regulator-name = "usb_h1_vbus";
  45                         regulator-min-microvolt = <5000000>;
  46                         regulator-max-microvolt = <5000000>;
  47                         gpio = <&gpio1 29 0>;
  48                         enable-active-high;
  49                         vin-supply = <&swbst_reg>;
  50                 };
  51
  52                 reg_audio: regulator@2 {
  53                         compatible = "regulator-fixed";
  54                         reg = <2>;
  55                         regulator-name = "wm8962-supply";
  56                         gpio = <&gpio4 10 0>;
  57                         enable-active-high;
  58                 };
  59
  60                 reg_pcie: regulator@3 {
  61                         compatible = "regulator-fixed";
  62                         reg = <3>;
  63                         pinctrl-names = "default";
  64                         pinctrl-0 = <&pinctrl_pcie_reg>;
  65                         regulator-name = "MPCIE_3V3";
  66                         regulator-min-microvolt = <3300000>;
  67                         regulator-max-microvolt = <3300000>;
  68                         gpio = <&gpio3 19 0>;
  69                         regulator-always-on;
  70                         enable-active-high;
  71                 };
  72         };
  73
  74         gpio-keys {
  75                 compatible = "gpio-keys";
  76                 pinctrl-names = "default";
  77                 pinctrl-0 = <&pinctrl_gpio_keys>;
  78
  79                 power {
  80                         label = "Power Button";
  81                         gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
  82                         wakeup-source;
  83                         linux,code = <KEY_POWER>;
  84                 };
  85
  86                 volume-up {
  87                         label = "Volume Up";
  88                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
  89                         wakeup-source;
  90                         linux,code = <KEY_VOLUMEUP>;
  91                 };
  92
  93                 volume-down {
  94                         label = "Volume Down";
  95                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  96                         wakeup-source;
  97                         linux,code = <KEY_VOLUMEDOWN>;
  98                 };
  99         };
 100
 101         sound {
 102                 compatible = "fsl,imx6q-sabresd-wm8962",
 103                            "fsl,imx-audio-wm8962";
 104                 model = "wm8962-audio";
 105                 ssi-controller = <&ssi2>;
 106                 audio-codec = <&codec>;
 107                 audio-routing =
 108                         "Headphone Jack", "HPOUTL",
 109                         "Headphone Jack", "HPOUTR",
 110                         "Ext Spk", "SPKOUTL",
 111                         "Ext Spk", "SPKOUTR",
 112                         "AMIC", "MICBIAS",
 113                         "IN3R", "AMIC";
 114                 mux-int-port = <2>;
 115                 mux-ext-port = <3>;
 116         };
 117
 118         backlight {
 119                 compatible = "pwm-backlight";
 120                 pwms = <&pwm1 0 5000000>;
 121                 brightness-levels = <0 4 8 16 32 64 128 255>;
 122                 default-brightness-level = <7>;
 123                 status = "okay";
 124         };
 125
 126         leds {
 127                 compatible = "gpio-leds";
 128                 pinctrl-names = "default";
 129                 pinctrl-0 = <&pinctrl_gpio_leds>;
 130
 131                 red {
 132                         gpios = <&gpio1 2 0>;
 133                         default-state = "on";
 134                 };
 135         };
 136 };
 137
 138 &audmux {
 139         pinctrl-names = "default";
 140         pinctrl-0 = <&pinctrl_audmux>;
 141         status = "okay";
 142 };
 143
 144 &clks {
 145         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 146                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 147         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 148                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 149 };
 150
 151 &ecspi1 {
 152         fsl,spi-num-chipselects = <1>;
 153         cs-gpios = <&gpio4 9 0>;
 154         pinctrl-names = "default";
 155         pinctrl-0 = <&pinctrl_ecspi1>;
 156         status = "okay";
 157
 158         flash: m25p80@0 {
 159                 #address-cells = <1>;
 160                 #size-cells = <1>;
 161                 compatible = "st,m25p32", "jedec,spi-nor";
 162                 spi-max-frequency = <20000000>;
 163                 reg = <0>;
 164         };
 165 };
 166
 167 &fec {
 168         pinctrl-names = "default";
 169         pinctrl-0 = <&pinctrl_enet>;
 170         phy-mode = "rgmii";
 171         phy-reset-gpios = <&gpio1 25 0>;
 172         status = "okay";
 173 };
 174
 175 &hdmi {
 176         ddc-i2c-bus = <&i2c2>;
 177         status = "okay";
 178 };
 179
 180 &i2c1 {
 181         clock-frequency = <100000>;
 182         pinctrl-names = "default";
 183         pinctrl-0 = <&pinctrl_i2c1>;
 184         status = "okay";
 185
 186         codec: wm8962@1a {
 187                 compatible = "wlf,wm8962";
 188                 reg = <0x1a>;
 189                 clocks = <&clks IMX6QDL_CLK_CKO>;
 190                 DCVDD-supply = <&reg_audio>;
 191                 DBVDD-supply = <&reg_audio>;
 192                 AVDD-supply = <&reg_audio>;
 193                 CPVDD-supply = <&reg_audio>;
 194                 MICVDD-supply = <&reg_audio>;
 195                 PLLVDD-supply = <&reg_audio>;
 196                 SPKVDD1-supply = <&reg_audio>;
 197                 SPKVDD2-supply = <&reg_audio>;
 198                 gpio-cfg = <
 199                         0x0000 /* 0:Default */
 200                         0x0000 /* 1:Default */
 201                         0x0013 /* 2:FN_DMICCLK */
 202                         0x0000 /* 3:Default */
 203                         0x8014 /* 4:FN_DMICCDAT */
 204                         0x0000 /* 5:Default */
 205                 >;
 206        };
 207 };
 208
 209 &i2c2 {
 210         clock-frequency = <100000>;
 211         pinctrl-names = "default";
 212         pinctrl-0 = <&pinctrl_i2c2>;
 213         status = "okay";
 214
 215         pmic: pfuze100@08 {
 216                 compatible = "fsl,pfuze100";
 217                 reg = <0x08>;
 218
 219                 regulators {
 220                         sw1a_reg: sw1ab {
 221                                 regulator-min-microvolt = <300000>;
 222                                 regulator-max-microvolt = <1875000>;
 223                                 regulator-boot-on;
 224                                 regulator-always-on;
 225                                 regulator-ramp-delay = <6250>;
 226                         };
 227
 228                         sw1c_reg: sw1c {
 229                                 regulator-min-microvolt = <300000>;
 230                                 regulator-max-microvolt = <1875000>;
 231                                 regulator-boot-on;
 232                                 regulator-always-on;
 233                                 regulator-ramp-delay = <6250>;
 234                         };
 235
 236                         sw2_reg: sw2 {
 237                                 regulator-min-microvolt = <800000>;
 238                                 regulator-max-microvolt = <3300000>;
 239                                 regulator-boot-on;
 240                                 regulator-always-on;
 241                                 regulator-ramp-delay = <6250>;
 242                         };
 243
 244                         sw3a_reg: sw3a {
 245                                 regulator-min-microvolt = <400000>;
 246                                 regulator-max-microvolt = <1975000>;
 247                                 regulator-boot-on;
 248                                 regulator-always-on;
 249                         };
 250
 251                         sw3b_reg: sw3b {
 252                                 regulator-min-microvolt = <400000>;
 253                                 regulator-max-microvolt = <1975000>;
 254                                 regulator-boot-on;
 255                                 regulator-always-on;
 256                         };
 257
 258                         sw4_reg: sw4 {
 259                                 regulator-min-microvolt = <800000>;
 260                                 regulator-max-microvolt = <3300000>;
 261                         };
 262
 263                         swbst_reg: swbst {
 264                                 regulator-min-microvolt = <5000000>;
 265                                 regulator-max-microvolt = <5150000>;
 266                         };
 267
 268                         snvs_reg: vsnvs {
 269                                 regulator-min-microvolt = <1000000>;
 270                                 regulator-max-microvolt = <3000000>;
 271                                 regulator-boot-on;
 272                                 regulator-always-on;
 273                         };
 274
 275                         vref_reg: vrefddr {
 276                                 regulator-boot-on;
 277                                 regulator-always-on;
 278                         };
 279
 280                         vgen1_reg: vgen1 {
 281                                 regulator-min-microvolt = <800000>;
 282                                 regulator-max-microvolt = <1550000>;
 283                         };
 284
 285                         vgen2_reg: vgen2 {
 286                                 regulator-min-microvolt = <800000>;
 287                                 regulator-max-microvolt = <1550000>;
 288                         };
 289
 290                         vgen3_reg: vgen3 {
 291                                 regulator-min-microvolt = <1800000>;
 292                                 regulator-max-microvolt = <3300000>;
 293                         };
 294
 295                         vgen4_reg: vgen4 {
 296                                 regulator-min-microvolt = <1800000>;
 297                                 regulator-max-microvolt = <3300000>;
 298                                 regulator-always-on;
 299                         };
 300
 301                         vgen5_reg: vgen5 {
 302                                 regulator-min-microvolt = <1800000>;
 303                                 regulator-max-microvolt = <3300000>;
 304                                 regulator-always-on;
 305                         };
 306
 307                         vgen6_reg: vgen6 {
 308                                 regulator-min-microvolt = <1800000>;
 309                                 regulator-max-microvolt = <3300000>;
 310                                 regulator-always-on;
 311                         };
 312                 };
 313         };
 314 };
 315
 316 &i2c3 {
 317         clock-frequency = <100000>;
 318         pinctrl-names = "default";
 319         pinctrl-0 = <&pinctrl_i2c3>;
 320         status = "okay";
 321
 322         egalax_ts@04 {
 323                 compatible = "eeti,egalax_ts";
 324                 reg = <0x04>;
 325                 interrupt-parent = <&gpio6>;
 326                 interrupts = <7 2>;
 327                 wakeup-gpios = <&gpio6 7 0>;
 328         };
 329 };
 330
 331 &iomuxc {
 332         pinctrl-names = "default";
 333         pinctrl-0 = <&pinctrl_hog>;
 334
 335         imx6qdl-sabresd {
 336                 pinctrl_hog: hoggrp {
 337                         fsl,pins = <
 338                                 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
 339                                 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
 340                                 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
 341                                 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
 342                                 MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
 343                                 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
 344                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
 345                                 MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
 346                                 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
 347                         >;
 348                 };
 349
 350                 pinctrl_audmux: audmuxgrp {
 351                         fsl,pins = <
 352                                 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
 353                                 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
 354                                 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
 355                                 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
 356                         >;
 357                 };
 358
 359                 pinctrl_ecspi1: ecspi1grp {
 360                         fsl,pins = <
 361                                 MX6QDL_PAD_KEY_COL1__ECSPI1_MISO        0x100b1
 362                                 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI        0x100b1
 363                                 MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK        0x100b1
 364                                 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09         0x1b0b0
 365                         >;
 366                 };
 367
 368                 pinctrl_enet: enetgrp {
 369                         fsl,pins = <
 370                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 371                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 372                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b0b0
 373                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b0b0
 374                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b0b0
 375                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b0b0
 376                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b0b0
 377                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
 378                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 379                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
 380                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
 381                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
 382                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
 383                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
 384                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
 385                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 386                         >;
 387                 };
 388
 389                 pinctrl_gpio_keys: gpio_keysgrp {
 390                         fsl,pins = <
 391                                 MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
 392                                 MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
 393                                 MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
 394                         >;
 395                 };
 396
 397                 pinctrl_i2c1: i2c1grp {
 398                         fsl,pins = <
 399                                 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA          0x4001b8b1
 400                                 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL          0x4001b8b1
 401                         >;
 402                 };
 403
 404                 pinctrl_i2c2: i2c2grp {
 405                         fsl,pins = <
 406                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 407                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 408                         >;
 409                 };
 410
 411                 pinctrl_i2c3: i2c3grp {
 412                         fsl,pins = <
 413                                 MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 414                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 415                         >;
 416                 };
 417
 418                 pinctrl_pcie: pciegrp {
 419                         fsl,pins = <
 420                                 MX6QDL_PAD_GPIO_17__GPIO7_IO12  0x1b0b0
 421                         >;
 422                 };
 423
 424                 pinctrl_pcie_reg: pciereggrp {
 425                         fsl,pins = <
 426                                 MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x1b0b0
 427                         >;
 428                 };
 429
 430                 pinctrl_pwm1: pwm1grp {
 431                         fsl,pins = <
 432                                 MX6QDL_PAD_SD1_DAT3__PWM1_OUT           0x1b0b1
 433                         >;
 434                 };
 435
 436                 pinctrl_uart1: uart1grp {
 437                         fsl,pins = <
 438                                 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA    0x1b0b1
 439                                 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1
 440                         >;
 441                 };
 442
 443                 pinctrl_usbotg: usbotggrp {
 444                         fsl,pins = <
 445                                 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
 446                         >;
 447                 };
 448
 449                 pinctrl_usdhc2: usdhc2grp {
 450                         fsl,pins = <
 451                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 452                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 453                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 454                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 455                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 456                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 457                                 MX6QDL_PAD_NANDF_D4__SD2_DATA4          0x17059
 458                                 MX6QDL_PAD_NANDF_D5__SD2_DATA5          0x17059
 459                                 MX6QDL_PAD_NANDF_D6__SD2_DATA6          0x17059
 460                                 MX6QDL_PAD_NANDF_D7__SD2_DATA7          0x17059
 461                         >;
 462                 };
 463
 464                 pinctrl_usdhc3: usdhc3grp {
 465                         fsl,pins = <
 466                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 467                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 468                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 469                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 470                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 471                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 472                                 MX6QDL_PAD_SD3_DAT4__SD3_DATA4          0x17059
 473                                 MX6QDL_PAD_SD3_DAT5__SD3_DATA5          0x17059
 474                                 MX6QDL_PAD_SD3_DAT6__SD3_DATA6          0x17059
 475                                 MX6QDL_PAD_SD3_DAT7__SD3_DATA7          0x17059
 476                         >;
 477                 };
 478
 479                 pinctrl_usdhc4: usdhc4grp {
 480                         fsl,pins = <
 481                                 MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 482                                 MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 483                                 MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 484                                 MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 485                                 MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 486                                 MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 487                                 MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 488                                 MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 489                                 MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 490                                 MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 491                         >;
 492                 };
 493         };
 494
 495         gpio_leds {
 496                 pinctrl_gpio_leds: gpioledsgrp {
 497                         fsl,pins = <
 498                                 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
 499                         >;
 500                 };
 501         };
 502 };
 503
 504 &ldb {
 505         status = "okay";
 506
 507         lvds-channel@1 {
 508                 fsl,data-mapping = "spwg";
 509                 fsl,data-width = <18>;
 510                 status = "okay";
 511
 512                 display-timings {
 513                         native-mode = <&timing0>;
 514                         timing0: hsd100pxn1 {
 515                                 clock-frequency = <65000000>;
 516                                 hactive = <1024>;
 517                                 vactive = <768>;
 518                                 hback-porch = <220>;
 519                                 hfront-porch = <40>;
 520                                 vback-porch = <21>;
 521                                 vfront-porch = <7>;
 522                                 hsync-len = <60>;
 523                                 vsync-len = <10>;
 524                         };
 525                 };
 526         };
 527 };
 528
 529 &pcie {
 530         pinctrl-names = "default";
 531         pinctrl-0 = <&pinctrl_pcie>;
 532         reset-gpio = <&gpio7 12 0>;
 533         status = "okay";
 534 };
 535
 536 &pwm1 {
 537         pinctrl-names = "default";
 538         pinctrl-0 = <&pinctrl_pwm1>;
 539         status = "okay";
 540 };
 541
 542 &snvs_poweroff {
 543         status = "okay";
 544 };
 545
 546 &ssi2 {
 547         status = "okay";
 548 };
 549
 550 &uart1 {
 551         pinctrl-names = "default";
 552         pinctrl-0 = <&pinctrl_uart1>;
 553         status = "okay";
 554 };
 555
 556 &usbh1 {
 557         vbus-supply = <&reg_usb_h1_vbus>;
 558         status = "okay";
 559 };
 560
 561 &usbotg {
 562         vbus-supply = <&reg_usb_otg_vbus>;
 563         pinctrl-names = "default";
 564         pinctrl-0 = <&pinctrl_usbotg>;
 565         disable-over-current;
 566         status = "okay";
 567 };
 568
 569 &usdhc2 {
 570         pinctrl-names = "default";
 571         pinctrl-0 = <&pinctrl_usdhc2>;
 572         bus-width = <8>;
 573         cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 574         wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 575         status = "okay";
 576 };
 577
 578 &usdhc3 {
 579         pinctrl-names = "default";
 580         pinctrl-0 = <&pinctrl_usdhc3>;
 581         bus-width = <8>;
 582         cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 583         wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 584         status = "okay";
 585 };
 586
 587 &usdhc4 {
 588         pinctrl-names = "default";
 589         pinctrl-0 = <&pinctrl_usdhc4>;
 590         bus-width = <8>;
 591         non-removable;
 592         no-1-8-v;
 593         status = "okay";
 594 };