arch/arm/boot/dts/kirkwood-6282.dtsi

   1 / {
   2         ocp@f1000000 {
   3
   4                 pinctrl: pinctrl@10000 {
   5                         compatible = "marvell,88f6282-pinctrl";
   6                         reg = <0x10000 0x20>;
   7
   8                         pmx_nand: pmx-nand {
   9                                 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
  10                                                         "mpp4", "mpp5", "mpp18", "mpp19";
  11                                 marvell,function = "nand";
  12                         };
  13
  14                         pmx_sata0: pmx-sata0 {
  15                                 marvell,pins = "mpp5", "mpp21", "mpp23";
  16                                 marvell,function = "sata0";
  17                         };
  18                         pmx_sata1: pmx-sata1 {
  19                                 marvell,pins = "mpp4", "mpp20", "mpp22";
  20                                 marvell,function = "sata1";
  21                         };
  22                         pmx_spi: pmx-spi {
  23                                 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
  24                                 marvell,function = "spi";
  25                         };
  26                         pmx_twsi0: pmx-twsi0 {
  27                                 marvell,pins = "mpp8", "mpp9";
  28                                 marvell,function = "twsi0";
  29                         };
  30
  31                         pmx_twsi1: pmx-twsi1 {
  32                                 marvell,pins = "mpp36", "mpp37";
  33                                 marvell,function = "twsi1";
  34                         };
  35
  36                         pmx_uart0: pmx-uart0 {
  37                                 marvell,pins = "mpp10", "mpp11";
  38                                 marvell,function = "uart0";
  39                         };
  40
  41                         pmx_uart1: pmx-uart1 {
  42                                 marvell,pins = "mpp13", "mpp14";
  43                                 marvell,function = "uart1";
  44                         };
  45                         pmx_sdio: pmx-sdio {
  46                                 marvell,pins = "mpp12", "mpp13", "mpp14",
  47                                                "mpp15", "mpp16", "mpp17";
  48                                 marvell,function = "sdio";
  49                         };
  50                 };
  51
  52                 thermal@10078 {
  53                         compatible = "marvell,kirkwood-thermal";
  54                         reg = <0x10078 0x4>;
  55                         status = "okay";
  56                 };
  57
  58                 i2c@11100 {
  59                         compatible = "marvell,mv64xxx-i2c";
  60                         reg = <0x11100 0x20>;
  61                         #address-cells = <1>;
  62                         #size-cells = <0>;
  63                         interrupts = <32>;
  64                         clock-frequency = <100000>;
  65                         clocks = <&gate_clk 7>;
  66                         status = "disabled";
  67                 };
  68
  69                 pcie-controller {
  70                         compatible = "marvell,kirkwood-pcie";
  71                         status = "disabled";
  72                         device_type = "pci";
  73
  74                         #address-cells = <3>;
  75                         #size-cells = <2>;
  76
  77                         bus-range = <0x00 0xff>;
  78
  79                         ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
  80                                   0x82000000 0 0x00044000 0x00044000 0 0x00002000   /* Port 1.0 registers */
  81                                   0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
  82                                   0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
  83
  84                         pcie@1,0 {
  85                                 device_type = "pci";
  86                                 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
  87                                 reg = <0x0800 0 0 0 0>;
  88                                 #address-cells = <3>;
  89                                 #size-cells = <2>;
  90                                 #interrupt-cells = <1>;
  91                                 ranges;
  92                                 interrupt-map-mask = <0 0 0 0>;
  93                                 interrupt-map = <0 0 0 0 &intc 9>;
  94                                 marvell,pcie-port = <0>;
  95                                 marvell,pcie-lane = <0>;
  96                                 clocks = <&gate_clk 2>;
  97                                 status = "disabled";
  98                         };
  99
 100                         pcie@2,0 {
 101                                 device_type = "pci";
 102                                 assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
 103                                 reg = <0x1000 0 0 0 0>;
 104                                 #address-cells = <3>;
 105                                 #size-cells = <2>;
 106                                 #interrupt-cells = <1>;
 107                                 ranges;
 108                                 interrupt-map-mask = <0 0 0 0>;
 109                                 interrupt-map = <0 0 0 0 &intc 10>;
 110                                 marvell,pcie-port = <1>;
 111                                 marvell,pcie-lane = <0>;
 112                                 clocks = <&gate_clk 18>;
 113                                 status = "disabled";
 114                         };
 115                 };
 116         };
 117 };