2 * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
4 * This file is licensed under the terms of the GNU General Public
5 * License version 2. This program is licensed "as is" without any
6 * warranty of any kind, whether express or implied.
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include "kirkwood.dtsi"
14 #include "kirkwood-6192.dtsi"
17 model = "LaCie LaPlug";
18 compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
21 device_type = "memory";
22 reg = <0x00000000 0x8000000>; /* 128 MB */
26 bootargs = "console=ttyS0,115200n8 earlyprintk";
40 pinctrl-0 = <&pmx_uart0>;
41 pinctrl-names = "default";
46 pinctrl-0 = <&pmx_twsi0>;
47 pinctrl-names = "default";
51 compatible = "at,24c04";
57 pinctrl: pinctrl@10000 {
58 pmx_usb_power_enable: pmx-usb-power-enable {
59 marvell,pins = "mpp14";
60 marvell,function = "gpio";
66 compatible = "gpio-keys";
69 label = "Power push button";
70 linux,code = <KEY_POWER>;
71 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
76 compatible = "gpio-leds";
79 label = "laplug_v2:red:power";
80 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
83 label = "laplug_v2:blue:power";
84 gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
85 linux,default-trigger = "default-on";
90 compatible = "gpio-poweroff";
91 gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
95 compatible = "simple-bus";
98 pinctrl-0 = <&pmx_usb_power_enable>;
99 pinctrl-names = "default";
101 usb_power_back1: regulator@1 {
102 compatible = "regulator-fixed";
104 regulator-name = "USB Power Back 1";
105 regulator-min-microvolt = <5000000>;
106 regulator-max-microvolt = <5000000>;
110 gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
113 usb_power_back2: regulator@2 {
114 compatible = "regulator-fixed";
116 regulator-name = "USB Power Back 2";
117 regulator-min-microvolt = <5000000>;
118 regulator-max-microvolt = <5000000>;
122 gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
125 usb_power_front: regulator@3 {
126 compatible = "regulator-fixed";
128 regulator-name = "USB Power Front";
129 regulator-min-microvolt = <5000000>;
130 regulator-max-microvolt = <5000000>;
134 gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
140 /* Total size : 512MB */
142 pinctrl-0 = <&pmx_nand>;
146 reg = <0x0 0x100000>; /* 1MB */
152 reg = <0x100000 0x1000000>; /* 16MB */
157 reg = <0x1100000 0x1EF00000>; /* 495MB */
164 ethphy0: ethernet-phy@0 {
165 device_type = "ethernet-phy";
173 phy-handle = <ðphy0>;