Merge remote-tracking branches 'asoc/topic/wm5100', 'asoc/topic/wm8523', 'asoc/topic...
[deliverable/linux.git] / arch / arm / boot / dts / moxart.dtsi
1 /* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
2 *
3 * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
4 *
5 * Licensed under GPLv2 or later.
6 */
7
8 /include/ "skeleton.dtsi"
9
10 / {
11 compatible = "moxa,moxart";
12 model = "MOXART";
13 interrupt-parent = <&intc>;
14
15 cpus {
16 #address-cells = <1>;
17 #size-cells = <0>;
18
19 cpu@0 {
20 device_type = "cpu";
21 compatible = "faraday,fa526";
22 reg = <0>;
23 };
24 };
25
26 clocks {
27 #address-cells = <1>;
28 #size-cells = <0>;
29 };
30
31 soc {
32 compatible = "simple-bus";
33 #address-cells = <1>;
34 #size-cells = <1>;
35 reg = <0x90000000 0x10000000>;
36 ranges;
37
38 intc: interrupt-controller@98800000 {
39 compatible = "moxa,moxart-ic";
40 reg = <0x98800000 0x38>;
41 interrupt-controller;
42 #interrupt-cells = <2>;
43 interrupt-mask = <0x00080000>;
44 };
45
46 clk_pll: clk_pll@98100000 {
47 compatible = "moxa,moxart-pll-clock";
48 #clock-cells = <0>;
49 reg = <0x98100000 0x34>;
50 };
51
52 clk_apb: clk_apb@98100000 {
53 compatible = "moxa,moxart-apb-clock";
54 #clock-cells = <0>;
55 reg = <0x98100000 0x34>;
56 clocks = <&clk_pll>;
57 };
58
59 timer: timer@98400000 {
60 compatible = "moxa,moxart-timer";
61 reg = <0x98400000 0x42>;
62 interrupts = <19 1>;
63 clocks = <&clk_apb>;
64 };
65
66 gpio: gpio@98700000 {
67 gpio-controller;
68 #gpio-cells = <2>;
69 compatible = "moxa,moxart-gpio";
70 reg = <0x98700000 0xC>;
71 };
72
73 rtc: rtc {
74 compatible = "moxa,moxart-rtc";
75 gpio-rtc-sclk = <&gpio 5 0>;
76 gpio-rtc-data = <&gpio 6 0>;
77 gpio-rtc-reset = <&gpio 7 0>;
78 };
79
80 dma: dma@90500000 {
81 compatible = "moxa,moxart-dma";
82 reg = <0x90500080 0x40>;
83 interrupts = <24 0>;
84 #dma-cells = <1>;
85 };
86
87 watchdog: watchdog@98500000 {
88 compatible = "moxa,moxart-watchdog";
89 reg = <0x98500000 0x10>;
90 clocks = <&clk_apb>;
91 };
92
93 sdhci: sdhci@98e00000 {
94 compatible = "moxa,moxart-sdhci";
95 reg = <0x98e00000 0x5C>;
96 interrupts = <5 0>;
97 clocks = <&clk_apb>;
98 dmas = <&dma 5>,
99 <&dma 5>;
100 dma-names = "tx", "rx";
101 status = "disabled";
102 };
103
104 mdio0: mdio@90900090 {
105 compatible = "moxa,moxart-mdio";
106 reg = <0x90900090 0x8>;
107 #address-cells = <1>;
108 #size-cells = <0>;
109 status = "disabled";
110 };
111
112 mdio1: mdio@92000090 {
113 compatible = "moxa,moxart-mdio";
114 reg = <0x92000090 0x8>;
115 #address-cells = <1>;
116 #size-cells = <0>;
117 status = "disabled";
118 };
119
120 mac0: mac@90900000 {
121 compatible = "moxa,moxart-mac";
122 reg = <0x90900000 0x90>;
123 interrupts = <25 0>;
124 phy-handle = <&ethphy0>;
125 phy-mode = "mii";
126 status = "disabled";
127 };
128
129 mac1: mac@92000000 {
130 compatible = "moxa,moxart-mac";
131 reg = <0x92000000 0x90>;
132 interrupts = <27 0>;
133 phy-handle = <&ethphy1>;
134 phy-mode = "mii";
135 status = "disabled";
136 };
137
138 uart0: uart@98200000 {
139 compatible = "ns16550a";
140 reg = <0x98200000 0x20>;
141 interrupts = <31 8>;
142 reg-shift = <2>;
143 reg-io-width = <4>;
144 clock-frequency = <14745600>;
145 status = "disabled";
146 };
147 };
148 };
This page took 0.036572 seconds and 6 git commands to generate.