arch/arm/boot/dts/omap3-tao3530.dtsi

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * published by the Free Software Foundation.
   8  */
   9 /dts-v1/;
  10
  11 #include "omap34xx-hs.dtsi"
  12
  13 / {
  14         cpus {
  15                 cpu@0 {
  16                         cpu0-supply = <&vcc>;
  17                 };
  18         };
  19
  20         memory {
  21                 device_type = "memory";
  22                 reg = <0x80000000 0x10000000>; /* 256 MB */
  23         };
  24
  25         /* HS USB Port 2 Power */
  26         hsusb2_power: hsusb2_power_reg {
  27                 compatible = "regulator-fixed";
  28                 regulator-name = "hsusb2_vbus";
  29                 regulator-min-microvolt = <3300000>;
  30                 regulator-max-microvolt = <3300000>;
  31                 gpio = <&twl_gpio 18 0>;        /* GPIO LEDA */
  32                 startup-delay-us = <70000>;
  33         };
  34
  35         /* HS USB Host PHY on PORT 2 */
  36         hsusb2_phy: hsusb2_phy {
  37                 compatible = "usb-nop-xceiv";
  38                 reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;       /* gpio_162 */
  39                 vcc-supply = <&hsusb2_power>;
  40         };
  41
  42         sound {
  43                 compatible = "ti,omap-twl4030";
  44                 ti,model = "omap3beagle";
  45
  46                 /* McBSP2 is used for onboard sound, same as on beagle */
  47                 ti,mcbsp = <&mcbsp2>;
  48                 ti,codec = <&twl_audio>;
  49         };
  50
  51         /* Regulator to enable/switch the vcc of the Wifi module */
  52         mmc2_sdio_poweron: regulator-mmc2-sdio-poweron {
  53                 compatible = "regulator-fixed";
  54                 regulator-name = "regulator-mmc2-sdio-poweron";
  55                 regulator-min-microvolt = <3150000>;
  56                 regulator-max-microvolt = <3150000>;
  57                 gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;             /* gpio_157 */
  58                 enable-active-low;
  59                 startup-delay-us = <10000>;
  60         };
  61 };
  62
  63 &omap3_pmx_core {
  64         hsusbb2_pins: pinmux_hsusbb2_pins {
  65                 pinctrl-single,pins = <
  66                         OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)               /* etk_d10.hsusb2_clk */
  67                         OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)               /* etk_d11.hsusb2_stp */
  68                         OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* etk_d12.hsusb2_dir */
  69                         OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* etk_d13.hsusb2_nxt */
  70                         OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* etk_d14.hsusb2_data0 */
  71                         OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* etk_d15.hsusb2_data1 */
  72                         OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
  73                         OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
  74                         OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
  75                         OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
  76                         OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
  77                         OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
  78                 >;
  79         };
  80
  81         mmc1_pins: pinmux_mmc1_pins {
  82                 pinctrl-single,pins = <
  83                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
  84                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
  85                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
  86                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
  87                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
  88                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
  89                         OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
  90                         OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
  91                         OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
  92                         OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
  93                 >;
  94         };
  95
  96         mmc2_pins: pinmux_mmc2_pins {
  97                 pinctrl-single,pins = <
  98                         OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
  99                         OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
 100                         OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
 101                         OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
 102                         OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
 103                         OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
 104                 >;
 105         };
 106
 107         /* wlan GPIO output for WLAN_EN */
 108         wlan_gpio: pinmux_wlan_gpio {
 109                 pinctrl-single,pins = <
 110                         OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)       /* mcbsp1_fsr gpio_157 */
 111                 >;
 112         };
 113
 114         uart3_pins: pinmux_uart3_pins {
 115                 pinctrl-single,pins = <
 116                         OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
 117                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)       /* uart3_tx_irtx.uart3_tx_irtx */
 118                 >;
 119         };
 120
 121         i2c3_pins: pinmux_i2c3_pins {
 122                 pinctrl-single,pins = <
 123                         OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */
 124                         OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */
 125                 >;
 126         };
 127
 128         mcspi1_pins: pinmux_mcspi1_pins {
 129                 pinctrl-single,pins = <
 130                         OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
 131                         OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
 132                         OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
 133                         OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
 134                 >;
 135         };
 136
 137         mcspi3_pins: pinmux_mcspi3_pins {
 138                 pinctrl-single,pins = <
 139                         OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1)       /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */
 140                         OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */
 141                         OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1)       /* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */
 142                         OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1)        /* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */
 143                 >;
 144         };
 145
 146         mcbsp3_pins: pinmux_mcbsp3_pins {
 147                 pinctrl-single,pins = <
 148                         OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)       /* mcbsp3_dx.uart2_cts */
 149                         OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)        /* mcbsp3_dr.uart2_rts */
 150                         OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)        /* mcbsp3_clk.uart2_tx */
 151                         OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)        /* mcbsp3_fsx.uart2_rx */
 152                 >;
 153         };
 154 };
 155
 156 /* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */
 157 &mcbsp1 {
 158         status = "disabled";
 159 };
 160
 161 &mcbsp2 {
 162         status = "okay";
 163 };
 164
 165 &i2c1 {
 166         clock-frequency = <2600000>;
 167
 168         twl: twl@48 {
 169                 reg = <0x48>;
 170                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 171                 interrupt-parent = <&intc>;
 172
 173                 twl_audio: audio {
 174                         compatible = "ti,twl4030-audio";
 175                         codec {
 176                         };
 177                 };
 178         };
 179 };
 180
 181 &i2c3 {
 182         clock-frequency = <100000>;
 183
 184         pinctrl-names = "default";
 185         pinctrl-0 = <&i2c3_pins>;
 186 };
 187
 188 &mcspi1 {
 189         pinctrl-names = "default";
 190         pinctrl-0 = <&mcspi1_pins>;
 191
 192         spidev@0 {
 193                 compatible = "spidev";
 194                 spi-max-frequency = <48000000>;
 195                 reg = <0>;
 196                 spi-cpha;
 197         };
 198 };
 199
 200 &mcspi3 {
 201         pinctrl-names = "default";
 202         pinctrl-0 = <&mcspi3_pins>;
 203
 204         spidev@0 {
 205                 compatible = "spidev";
 206                 spi-max-frequency = <48000000>;
 207                 reg = <0>;
 208                 spi-cpha;
 209         };
 210 };
 211
 212 #include "twl4030.dtsi"
 213 #include "twl4030_omap3.dtsi"
 214
 215 &mmc1 {
 216         pinctrl-names = "default";
 217         pinctrl-0 = <&mmc1_pins>;
 218         vmmc-supply = <&vmmc1>;
 219         vmmc_aux-supply = <&vsim>;
 220         cd-gpios = <&twl_gpio 0 0>;
 221         bus-width = <8>;
 222 };
 223
 224 // WiFi (Marvell 88W8686) on MMC2/SDIO
 225 &mmc2 {
 226         pinctrl-names = "default";
 227         pinctrl-0 = <&mmc2_pins>;
 228         vmmc-supply = <&mmc2_sdio_poweron>;
 229         non-removable;
 230         bus-width = <4>;
 231         cap-power-off-card;
 232 };
 233
 234 &mmc3 {
 235         status = "disabled";
 236 };
 237
 238 &usbhshost {
 239         port2-mode = "ehci-phy";
 240 };
 241
 242 &usbhsehci {
 243         phys = <0 &hsusb2_phy>;
 244 };
 245
 246 &twl_gpio {
 247         ti,use-leds;
 248         /* pullups: BIT(1) */
 249         ti,pullups = <0x000002>;
 250         /*
 251          * pulldowns:
 252          * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
 253          * BIT(15), BIT(16), BIT(17)
 254          */
 255         ti,pulldowns = <0x03a1c4>;
 256 };
 257
 258 &uart3 {
 259         pinctrl-names = "default";
 260         pinctrl-0 = <&uart3_pins>;
 261 };
 262
 263 &mcbsp3 {
 264         status = "okay";
 265         pinctrl-names = "default";
 266         pinctrl-0 = <&mcbsp3_pins>;
 267 };
 268
 269 &gpmc {
 270         ranges = <0 0 0x00000000 0x01000000>;
 271
 272         nand@0,0 {
 273                 reg = <0 0 0>; /* CS0, offset 0 */
 274                 nand-bus-width = <16>;
 275                 gpmc,device-width = <2>;        /* GPMC_DEVWIDTH_16BIT */
 276                 ti,nand-ecc-opt = "sw";
 277
 278                 gpmc,cs-on-ns = <0>;
 279                 gpmc,cs-rd-off-ns = <36>;
 280                 gpmc,cs-wr-off-ns = <36>;
 281                 gpmc,adv-on-ns = <6>;
 282                 gpmc,adv-rd-off-ns = <24>;
 283                 gpmc,adv-wr-off-ns = <36>;
 284                 gpmc,oe-on-ns = <6>;
 285                 gpmc,oe-off-ns = <48>;
 286                 gpmc,we-on-ns = <6>;
 287                 gpmc,we-off-ns = <30>;
 288                 gpmc,rd-cycle-ns = <72>;
 289                 gpmc,wr-cycle-ns = <72>;
 290                 gpmc,access-ns = <54>;
 291                 gpmc,wr-access-ns = <30>;
 292
 293                 #address-cells = <1>;
 294                 #size-cells = <1>;
 295
 296                 x-loader@0 {
 297                         label = "X-Loader";
 298                         reg = <0 0x80000>;
 299                 };
 300
 301                 bootloaders@80000 {
 302                         label = "U-Boot";
 303                         reg = <0x80000 0x1e0000>;
 304                 };
 305
 306                 bootloaders_env@260000 {
 307                         label = "U-Boot Env";
 308                         reg = <0x260000 0x20000>;
 309                 };
 310
 311                 kernel@280000 {
 312                         label = "Kernel";
 313                         reg = <0x280000 0x400000>;
 314                 };
 315
 316                 filesystem@680000 {
 317                         label = "File System";
 318                         reg = <0x680000 0xf980000>;
 319                 };
 320         };
 321 };
 322
 323 &usb_otg_hs {
 324         interface-type = <0>;
 325         usb-phy = <&usb2_phy>;
 326         phys = <&usb2_phy>;
 327         phy-names = "usb2-phy";
 328         mode = <3>;
 329         power = <50>;
 330 };
 331
 332 &vaux2 {
 333         regulator-name = "vdd_ehci";
 334         regulator-min-microvolt = <1800000>;
 335         regulator-max-microvolt = <1800000>;
 336         regulator-always-on;
 337 };