2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
11 * Carveout for multimedia usecases
12 * It should be the last 48MB of the first 512MB memory part
13 * In theory, it should not even exist. That zone should be reserved
14 * dynamically during the .reserve callback.
16 /memreserve/ 0x9d000000 0x03000000;
18 /include/ "skeleton.dtsi"
21 compatible = "ti,omap5";
22 interrupt-parent = <&gic>;
35 compatible = "arm,cortex-a15";
37 compatible = "arm,armv7-timer";
38 /* 14th PPI IRQ, active low level-sensitive */
39 interrupts = <1 14 0x308>;
40 clock-frequency = <6144000>;
44 compatible = "arm,cortex-a15";
46 compatible = "arm,armv7-timer";
47 /* 14th PPI IRQ, active low level-sensitive */
48 interrupts = <1 14 0x308>;
49 clock-frequency = <6144000>;
55 * The soc node represents the soc top level view. It is uses for IPs
56 * that are not memory mapped in the MPU view or for the MPU itself.
59 compatible = "ti,omap-infra";
61 compatible = "ti,omap5-mpu";
67 * XXX: Use a flat representation of the OMAP3 interconnect.
68 * The real OMAP interconnect network is quite complex.
69 * Since that will not bring real advantage to represent that in DT for
70 * the moment, just use a fake OCP bus entry to represent the whole bus
74 compatible = "ti,omap4-l3-noc", "simple-bus";
78 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
80 counter32k: counter@4ae04000 {
81 compatible = "ti,omap-counter32k";
82 reg = <0x4ae04000 0x40>;
83 ti,hwmods = "counter_32k";
86 omap5_pmx_core: pinmux@4a002840 {
87 compatible = "ti,omap4-padconf", "pinctrl-single";
88 reg = <0x4a002840 0x01b6>;
91 pinctrl-single,register-width = <16>;
92 pinctrl-single,function-mask = <0x7fff>;
94 omap5_pmx_wkup: pinmux@4ae0c840 {
95 compatible = "ti,omap4-padconf", "pinctrl-single";
96 reg = <0x4ae0c840 0x0038>;
99 pinctrl-single,register-width = <16>;
100 pinctrl-single,function-mask = <0x7fff>;
103 gic: interrupt-controller@48211000 {
104 compatible = "arm,cortex-a15-gic";
105 interrupt-controller;
106 #interrupt-cells = <3>;
107 reg = <0x48211000 0x1000>,
111 sdma: dma-controller@4a056000 {
112 compatible = "ti,omap4430-sdma";
113 reg = <0x4a056000 0x1000>;
114 interrupts = <0 12 0x4>,
119 #dma-channels = <32>;
120 #dma-requests = <127>;
123 gpio1: gpio@4ae10000 {
124 compatible = "ti,omap4-gpio";
125 reg = <0x4ae10000 0x200>;
126 interrupts = <0 29 0x4>;
130 interrupt-controller;
131 #interrupt-cells = <1>;
134 gpio2: gpio@48055000 {
135 compatible = "ti,omap4-gpio";
136 reg = <0x48055000 0x200>;
137 interrupts = <0 30 0x4>;
141 interrupt-controller;
142 #interrupt-cells = <1>;
145 gpio3: gpio@48057000 {
146 compatible = "ti,omap4-gpio";
147 reg = <0x48057000 0x200>;
148 interrupts = <0 31 0x4>;
152 interrupt-controller;
153 #interrupt-cells = <1>;
156 gpio4: gpio@48059000 {
157 compatible = "ti,omap4-gpio";
158 reg = <0x48059000 0x200>;
159 interrupts = <0 32 0x4>;
163 interrupt-controller;
164 #interrupt-cells = <1>;
167 gpio5: gpio@4805b000 {
168 compatible = "ti,omap4-gpio";
169 reg = <0x4805b000 0x200>;
170 interrupts = <0 33 0x4>;
174 interrupt-controller;
175 #interrupt-cells = <1>;
178 gpio6: gpio@4805d000 {
179 compatible = "ti,omap4-gpio";
180 reg = <0x4805d000 0x200>;
181 interrupts = <0 34 0x4>;
185 interrupt-controller;
186 #interrupt-cells = <1>;
189 gpio7: gpio@48051000 {
190 compatible = "ti,omap4-gpio";
191 reg = <0x48051000 0x200>;
192 interrupts = <0 35 0x4>;
196 interrupt-controller;
197 #interrupt-cells = <1>;
200 gpio8: gpio@48053000 {
201 compatible = "ti,omap4-gpio";
202 reg = <0x48053000 0x200>;
203 interrupts = <0 121 0x4>;
207 interrupt-controller;
208 #interrupt-cells = <1>;
211 gpmc: gpmc@50000000 {
212 compatible = "ti,omap4430-gpmc";
213 reg = <0x50000000 0x1000>;
214 #address-cells = <2>;
216 interrupts = <0 20 0x4>;
218 gpmc,num-waitpins = <4>;
223 compatible = "ti,omap4-i2c";
224 reg = <0x48070000 0x100>;
225 interrupts = <0 56 0x4>;
226 #address-cells = <1>;
232 compatible = "ti,omap4-i2c";
233 reg = <0x48072000 0x100>;
234 interrupts = <0 57 0x4>;
235 #address-cells = <1>;
241 compatible = "ti,omap4-i2c";
242 reg = <0x48060000 0x100>;
243 interrupts = <0 61 0x4>;
244 #address-cells = <1>;
250 compatible = "ti,omap4-i2c";
251 reg = <0x4807a000 0x100>;
252 interrupts = <0 62 0x4>;
253 #address-cells = <1>;
259 compatible = "ti,omap4-i2c";
260 reg = <0x4807c000 0x100>;
261 interrupts = <0 60 0x4>;
262 #address-cells = <1>;
267 mcspi1: spi@48098000 {
268 compatible = "ti,omap4-mcspi";
269 reg = <0x48098000 0x200>;
270 interrupts = <0 65 0x4>;
271 #address-cells = <1>;
273 ti,hwmods = "mcspi1";
283 dma-names = "tx0", "rx0", "tx1", "rx1",
284 "tx2", "rx2", "tx3", "rx3";
287 mcspi2: spi@4809a000 {
288 compatible = "ti,omap4-mcspi";
289 reg = <0x4809a000 0x200>;
290 interrupts = <0 66 0x4>;
291 #address-cells = <1>;
293 ti,hwmods = "mcspi2";
299 dma-names = "tx0", "rx0", "tx1", "rx1";
302 mcspi3: spi@480b8000 {
303 compatible = "ti,omap4-mcspi";
304 reg = <0x480b8000 0x200>;
305 interrupts = <0 91 0x4>;
306 #address-cells = <1>;
308 ti,hwmods = "mcspi3";
310 dmas = <&sdma 15>, <&sdma 16>;
311 dma-names = "tx0", "rx0";
314 mcspi4: spi@480ba000 {
315 compatible = "ti,omap4-mcspi";
316 reg = <0x480ba000 0x200>;
317 interrupts = <0 48 0x4>;
318 #address-cells = <1>;
320 ti,hwmods = "mcspi4";
322 dmas = <&sdma 70>, <&sdma 71>;
323 dma-names = "tx0", "rx0";
326 uart1: serial@4806a000 {
327 compatible = "ti,omap4-uart";
328 reg = <0x4806a000 0x100>;
329 interrupts = <0 72 0x4>;
331 clock-frequency = <48000000>;
334 uart2: serial@4806c000 {
335 compatible = "ti,omap4-uart";
336 reg = <0x4806c000 0x100>;
337 interrupts = <0 73 0x4>;
339 clock-frequency = <48000000>;
342 uart3: serial@48020000 {
343 compatible = "ti,omap4-uart";
344 reg = <0x48020000 0x100>;
345 interrupts = <0 74 0x4>;
347 clock-frequency = <48000000>;
350 uart4: serial@4806e000 {
351 compatible = "ti,omap4-uart";
352 reg = <0x4806e000 0x100>;
353 interrupts = <0 70 0x4>;
355 clock-frequency = <48000000>;
358 uart5: serial@48066000 {
359 compatible = "ti,omap4-uart";
360 reg = <0x48066000 0x100>;
361 interrupts = <0 105 0x4>;
363 clock-frequency = <48000000>;
366 uart6: serial@48068000 {
367 compatible = "ti,omap4-uart";
368 reg = <0x48068000 0x100>;
369 interrupts = <0 106 0x4>;
371 clock-frequency = <48000000>;
375 compatible = "ti,omap4-hsmmc";
376 reg = <0x4809c000 0x400>;
377 interrupts = <0 83 0x4>;
380 ti,needs-special-reset;
381 dmas = <&sdma 61>, <&sdma 62>;
382 dma-names = "tx", "rx";
386 compatible = "ti,omap4-hsmmc";
387 reg = <0x480b4000 0x400>;
388 interrupts = <0 86 0x4>;
390 ti,needs-special-reset;
391 dmas = <&sdma 47>, <&sdma 48>;
392 dma-names = "tx", "rx";
396 compatible = "ti,omap4-hsmmc";
397 reg = <0x480ad000 0x400>;
398 interrupts = <0 94 0x4>;
400 ti,needs-special-reset;
401 dmas = <&sdma 77>, <&sdma 78>;
402 dma-names = "tx", "rx";
406 compatible = "ti,omap4-hsmmc";
407 reg = <0x480d1000 0x400>;
408 interrupts = <0 96 0x4>;
410 ti,needs-special-reset;
411 dmas = <&sdma 57>, <&sdma 58>;
412 dma-names = "tx", "rx";
416 compatible = "ti,omap4-hsmmc";
417 reg = <0x480d5000 0x400>;
418 interrupts = <0 59 0x4>;
420 ti,needs-special-reset;
421 dmas = <&sdma 59>, <&sdma 60>;
422 dma-names = "tx", "rx";
425 keypad: keypad@4ae1c000 {
426 compatible = "ti,omap4-keypad";
430 mcpdm: mcpdm@40132000 {
431 compatible = "ti,omap4-mcpdm";
432 reg = <0x40132000 0x7f>, /* MPU private access */
433 <0x49032000 0x7f>; /* L3 Interconnect */
434 reg-names = "mpu", "dma";
435 interrupts = <0 112 0x4>;
439 dmic: dmic@4012e000 {
440 compatible = "ti,omap4-dmic";
441 reg = <0x4012e000 0x7f>, /* MPU private access */
442 <0x4902e000 0x7f>; /* L3 Interconnect */
443 reg-names = "mpu", "dma";
444 interrupts = <0 114 0x4>;
448 mcbsp1: mcbsp@40122000 {
449 compatible = "ti,omap4-mcbsp";
450 reg = <0x40122000 0xff>, /* MPU private access */
451 <0x49022000 0xff>; /* L3 Interconnect */
452 reg-names = "mpu", "dma";
453 interrupts = <0 17 0x4>;
454 interrupt-names = "common";
455 ti,buffer-size = <128>;
456 ti,hwmods = "mcbsp1";
459 mcbsp2: mcbsp@40124000 {
460 compatible = "ti,omap4-mcbsp";
461 reg = <0x40124000 0xff>, /* MPU private access */
462 <0x49024000 0xff>; /* L3 Interconnect */
463 reg-names = "mpu", "dma";
464 interrupts = <0 22 0x4>;
465 interrupt-names = "common";
466 ti,buffer-size = <128>;
467 ti,hwmods = "mcbsp2";
470 mcbsp3: mcbsp@40126000 {
471 compatible = "ti,omap4-mcbsp";
472 reg = <0x40126000 0xff>, /* MPU private access */
473 <0x49026000 0xff>; /* L3 Interconnect */
474 reg-names = "mpu", "dma";
475 interrupts = <0 23 0x4>;
476 interrupt-names = "common";
477 ti,buffer-size = <128>;
478 ti,hwmods = "mcbsp3";
481 timer1: timer@4ae18000 {
482 compatible = "ti,omap2-timer";
483 reg = <0x4ae18000 0x80>;
484 interrupts = <0 37 0x4>;
485 ti,hwmods = "timer1";
489 timer2: timer@48032000 {
490 compatible = "ti,omap2-timer";
491 reg = <0x48032000 0x80>;
492 interrupts = <0 38 0x4>;
493 ti,hwmods = "timer2";
496 timer3: timer@48034000 {
497 compatible = "ti,omap2-timer";
498 reg = <0x48034000 0x80>;
499 interrupts = <0 39 0x4>;
500 ti,hwmods = "timer3";
503 timer4: timer@48036000 {
504 compatible = "ti,omap2-timer";
505 reg = <0x48036000 0x80>;
506 interrupts = <0 40 0x4>;
507 ti,hwmods = "timer4";
510 timer5: timer@40138000 {
511 compatible = "ti,omap2-timer";
512 reg = <0x40138000 0x80>,
514 interrupts = <0 41 0x4>;
515 ti,hwmods = "timer5";
519 timer6: timer@4013a000 {
520 compatible = "ti,omap2-timer";
521 reg = <0x4013a000 0x80>,
523 interrupts = <0 42 0x4>;
524 ti,hwmods = "timer6";
529 timer7: timer@4013c000 {
530 compatible = "ti,omap2-timer";
531 reg = <0x4013c000 0x80>,
533 interrupts = <0 43 0x4>;
534 ti,hwmods = "timer7";
538 timer8: timer@4013e000 {
539 compatible = "ti,omap2-timer";
540 reg = <0x4013e000 0x80>,
542 interrupts = <0 44 0x4>;
543 ti,hwmods = "timer8";
548 timer9: timer@4803e000 {
549 compatible = "ti,omap2-timer";
550 reg = <0x4803e000 0x80>;
551 interrupts = <0 45 0x4>;
552 ti,hwmods = "timer9";
555 timer10: timer@48086000 {
556 compatible = "ti,omap2-timer";
557 reg = <0x48086000 0x80>;
558 interrupts = <0 46 0x4>;
559 ti,hwmods = "timer10";
562 timer11: timer@48088000 {
563 compatible = "ti,omap2-timer";
564 reg = <0x48088000 0x80>;
565 interrupts = <0 47 0x4>;
566 ti,hwmods = "timer11";
570 emif1: emif@0x4c000000 {
571 compatible = "ti,emif-4d5";
573 phy-type = <2>; /* DDR PHY type: Intelli PHY */
574 reg = <0x4c000000 0x400>;
575 interrupts = <0 110 0x4>;
576 hw-caps-read-idle-ctrl;
577 hw-caps-ll-interface;
581 emif2: emif@0x4d000000 {
582 compatible = "ti,emif-4d5";
584 phy-type = <2>; /* DDR PHY type: Intelli PHY */
585 reg = <0x4d000000 0x400>;
586 interrupts = <0 111 0x4>;
587 hw-caps-read-idle-ctrl;
588 hw-caps-ll-interface;
592 omap_control_usb: omap-control-usb@4a002300 {
593 compatible = "ti,omap-control-usb";
594 reg = <0x4a002300 0x4>,
596 reg-names = "control_dev_conf", "phy_power_usb";
601 compatible = "ti,dwc3";
602 ti,hwmods = "usb_otg_ss";
603 reg = <0x4a020000 0x1000>;
604 interrupts = <0 93 4>;
605 #address-cells = <1>;
610 compatible = "synopsys,dwc3";
611 reg = <0x4a030000 0x1000>;
612 interrupts = <0 92 4>;
613 usb-phy = <&usb2_phy>, <&usb3_phy>;
619 compatible = "ti,omap-ocp2scp";
620 #address-cells = <1>;
623 ti,hwmods = "ocp2scp1";
624 usb2_phy: usb2phy@4a084000 {
625 compatible = "ti,omap-usb2";
626 reg = <0x4a084000 0x7c>;
627 ctrl-module = <&omap_control_usb>;
630 usb3_phy: usb3phy@4a084400 {
631 compatible = "ti,omap-usb3";
632 reg = <0x4a084400 0x80>,
635 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
636 ctrl-module = <&omap_control_usb>;