arch/arm/boot/dts/qcom-apq8064-ifc6410.dts

   1 #include "qcom-apq8064-v2.0.dtsi"
   2 #include <dt-bindings/gpio/gpio.h>
   3
   4 / {
   5         model = "Qualcomm APQ8064/IFC6410";
   6         compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
   7
   8         aliases {
   9                 serial0 = &gsbi7_serial;
  10         };
  11
  12         soc {
  13                 pinctrl@800000 {
  14                         card_detect: card_detect {
  15                                 mux {
  16                                         pins = "gpio26";
  17                                         function = "gpio";
  18                                         bias-disable;
  19                                 };
  20                         };
  21                 };
  22
  23                 rpm@108000 {
  24                         regulators {
  25                                 vin_lvs1_3_6-supply = <&pm8921_s4>;
  26                                 vin_lvs2-supply = <&pm8921_s1>;
  27                                 vin_lvs4_5_7-supply = <&pm8921_s4>;
  28
  29                                 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
  30                                 vdd_l24-supply = <&pm8921_s1>;
  31                                 vdd_l25-supply = <&pm8921_s1>;
  32                                 vdd_l26-supply = <&pm8921_s7>;
  33                                 vdd_l27-supply = <&pm8921_s7>;
  34                                 vdd_l28-supply = <&pm8921_s7>;
  35
  36
  37                                 /* Buck SMPS */
  38                                 pm8921_s1: s1 {
  39                                         regulator-always-on;
  40                                         regulator-min-microvolt = <1225000>;
  41                                         regulator-max-microvolt = <1225000>;
  42                                         qcom,switch-mode-frequency = <3200000>;
  43                                         bias-pull-down;
  44                                 };
  45
  46                                 pm8921_s3: s3 {
  47                                         regulator-min-microvolt = <1000000>;
  48                                         regulator-max-microvolt = <1400000>;
  49                                         qcom,switch-mode-frequency = <4800000>;
  50                                 };
  51
  52                                 pm8921_s4: s4 {
  53                                         regulator-min-microvolt = <1800000>;
  54                                         regulator-max-microvolt = <1800000>;
  55                                         qcom,switch-mode-frequency = <3200000>;
  56                                 };
  57
  58                                 pm8921_s7: s7 {
  59                                         regulator-min-microvolt = <1300000>;
  60                                         regulator-max-microvolt = <1300000>;
  61                                         qcom,switch-mode-frequency = <3200000>;
  62                                 };
  63
  64                                 pm8921_l3: l3 {
  65                                         regulator-min-microvolt = <3050000>;
  66                                         regulator-max-microvolt = <3300000>;
  67                                         bias-pull-down;
  68                                 };
  69
  70                                 pm8921_l4: l4 {
  71                                         regulator-min-microvolt = <1000000>;
  72                                         regulator-max-microvolt = <1800000>;
  73                                         bias-pull-down;
  74                                 };
  75
  76                                 pm8921_l6: l6 {
  77                                         regulator-min-microvolt = <2950000>;
  78                                         regulator-max-microvolt = <2950000>;
  79                                         bias-pull-down;
  80                                 };
  81
  82                                 pm8921_l23: l23 {
  83                                         regulator-min-microvolt = <1700000>;
  84                                         regulator-max-microvolt = <1900000>;
  85                                         bias-pull-down;
  86                                 };
  87                         };
  88                 };
  89
  90                 gsbi3: gsbi@16200000 {
  91                         status = "okay";
  92                         qcom,mode = <GSBI_PROT_I2C>;
  93                         i2c3: i2c@16280000 {
  94                                 status = "okay";
  95                                 pinctrl-0 = <&i2c3_pins>;
  96                                 pinctrl-names = "default";
  97                         };
  98                 };
  99
 100                 gsbi@12440000 {
 101                         status = "okay";
 102                         qcom,mode = <GSBI_PROT_I2C>;
 103
 104                         i2c@12460000 {
 105                                 status = "okay";
 106                                 clock-frequency = <200000>;
 107                                 pinctrl-0 = <&i2c1_pins>;
 108                                 pinctrl-names = "default";
 109
 110                                 eeprom: eeprom@52 {
 111                                         compatible = "atmel,24c128";
 112                                         reg = <0x52>;
 113                                         pagesize = <32>;
 114                                 };
 115                         };
 116                 };
 117
 118                 gsbi@16600000 {
 119                         status = "ok";
 120                         qcom,mode = <GSBI_PROT_I2C_UART>;
 121                         serial@16640000 {
 122                                 status = "ok";
 123                         };
 124                 };
 125
 126                 sata_phy0: phy@1b400000 {
 127                         status = "okay";
 128                 };
 129
 130                 sata0: sata@29000000 {
 131                         status          = "okay";
 132                         target-supply   = <&pm8921_s4>;
 133                 };
 134
 135                 /* OTG */
 136                 usb1_phy: phy@12500000 {
 137                         status          = "okay";
 138                         vddcx-supply    = <&pm8921_s3>;
 139                         v3p3-supply     = <&pm8921_l3>;
 140                         v1p8-supply     = <&pm8921_l4>;
 141                 };
 142
 143                 usb3_phy: phy@12520000 {
 144                         status          = "okay";
 145                         vddcx-supply    = <&pm8921_s3>;
 146                         v3p3-supply     = <&pm8921_l3>;
 147                         v1p8-supply     = <&pm8921_l23>;
 148                 };
 149
 150                 usb4_phy: phy@12530000 {
 151                         status          = "okay";
 152                         vddcx-supply    = <&pm8921_s3>;
 153                         v3p3-supply     = <&pm8921_l3>;
 154                         v1p8-supply     = <&pm8921_l23>;
 155                 };
 156
 157                 gadget1: gadget@12500000 {
 158                         status = "okay";
 159                 };
 160
 161                 /* OTG */
 162                 usb1: usb@12500000 {
 163                         status = "okay";
 164                 };
 165
 166                 usb3: usb@12520000 {
 167                         status = "okay";
 168                 };
 169
 170                 usb4: usb@12530000 {
 171                         status = "okay";
 172                 };
 173
 174                 amba {
 175                         /* eMMC */
 176                         sdcc1: sdcc@12400000 {
 177                                 status = "okay";
 178                         };
 179
 180                         /* External micro SD card */
 181                         sdcc3: sdcc@12180000 {
 182                                 status = "okay";
 183                                 pinctrl-names   = "default";
 184                                 pinctrl-0       = <&card_detect>;
 185                                 cd-gpios        = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 186                         };
 187                         /* WLAN */
 188                         sdcc4: sdcc@121c0000 {
 189                                 status = "okay";
 190                         };
 191                 };
 192         };
 193 };