arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts

   1 #include "qcom-msm8974.dtsi"
   2 #include "qcom-pm8841.dtsi"
   3 #include "qcom-pm8941.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   7
   8 / {
   9         model = "Sony Xperia Z1";
  10         compatible = "sony,xperia-honami", "qcom,msm8974";
  11
  12         aliases {
  13                 serial0 = &blsp1_uart2;
  14         };
  15
  16         chosen {
  17                 stdout-path = "serial0:115200n8";
  18         };
  19
  20         gpio-keys {
  21                 compatible = "gpio-keys";
  22                 input-name = "gpio-keys";
  23
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&gpio_keys_pin_a>;
  26
  27                 volume-down {
  28                         label = "volume_down";
  29                         gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
  30                         linux,input-type = <1>;
  31                         linux,code = <KEY_VOLUMEDOWN>;
  32                 };
  33
  34                 camera-snapshot {
  35                         label = "camera_snapshot";
  36                         gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
  37                         linux,input-type = <1>;
  38                         linux,code = <KEY_CAMERA>;
  39                 };
  40
  41                 camera-focus {
  42                         label = "camera_focus";
  43                         gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
  44                         linux,input-type = <1>;
  45                         linux,code = <KEY_CAMERA_FOCUS>;
  46                 };
  47
  48                 volume-up {
  49                         label = "volume_up";
  50                         gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
  51                         linux,input-type = <1>;
  52                         linux,code = <KEY_VOLUMEUP>;
  53                 };
  54         };
  55
  56         memory@0 {
  57                 reg = <0 0x40000000>, <0x40000000 0x40000000>;
  58                 device_type = "memory";
  59         };
  60
  61         smd {
  62                 rpm {
  63                         rpm_requests {
  64                                 pm8841-regulators {
  65                                         s1 {
  66                                                 regulator-min-microvolt = <675000>;
  67                                                 regulator-max-microvolt = <1050000>;
  68                                         };
  69
  70                                         s2 {
  71                                                 regulator-min-microvolt = <500000>;
  72                                                 regulator-max-microvolt = <1050000>;
  73                                         };
  74
  75                                         s3 {
  76                                                 regulator-min-microvolt = <500000>;
  77                                                 regulator-max-microvolt = <1050000>;
  78                                         };
  79
  80                                         s4 {
  81                                                 regulator-min-microvolt = <500000>;
  82                                                 regulator-max-microvolt = <1050000>;
  83                                         };
  84                                 };
  85
  86                                 pm8941-regulators {
  87                                         vdd_l1_l3-supply = <&pm8941_s1>;
  88                                         vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
  89                                         vdd_l4_l11-supply = <&pm8941_s1>;
  90                                         vdd_l5_l7-supply = <&pm8941_s2>;
  91                                         vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
  92                                         vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
  93                                         vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
  94                                         vdd_l21-supply = <&vreg_boost>;
  95                                         vin_5vs-supply = <&pm8941_5v>;
  96
  97                                         s1 {
  98                                                 regulator-min-microvolt = <1300000>;
  99                                                 regulator-max-microvolt = <1300000>;
 100                                                 regulator-always-on;
 101                                                 regulator-boot-on;
 102                                         };
 103
 104                                         s2 {
 105                                                 regulator-min-microvolt = <2150000>;
 106                                                 regulator-max-microvolt = <2150000>;
 107                                                 regulator-boot-on;
 108                                         };
 109
 110                                         s3 {
 111                                                 regulator-min-microvolt = <1800000>;
 112                                                 regulator-max-microvolt = <1800000>;
 113                                                 regulator-always-on;
 114                                                 regulator-boot-on;
 115                                         };
 116
 117                                         s4 {
 118                                                 regulator-min-microvolt = <5000000>;
 119                                                 regulator-max-microvolt = <5000000>;
 120                                         };
 121
 122                                         l1 {
 123                                                 regulator-min-microvolt = <1225000>;
 124                                                 regulator-max-microvolt = <1225000>;
 125
 126                                                 regulator-always-on;
 127                                                 regulator-boot-on;
 128                                         };
 129
 130                                         l2 {
 131                                                 regulator-min-microvolt = <1200000>;
 132                                                 regulator-max-microvolt = <1200000>;
 133                                         };
 134
 135                                         l3 {
 136                                                 regulator-min-microvolt = <1200000>;
 137                                                 regulator-max-microvolt = <1200000>;
 138                                         };
 139
 140                                         l4 {
 141                                                 regulator-min-microvolt = <1225000>;
 142                                                 regulator-max-microvolt = <1225000>;
 143                                         };
 144
 145                                         l5 {
 146                                                 regulator-min-microvolt = <1800000>;
 147                                                 regulator-max-microvolt = <1800000>;
 148                                         };
 149
 150                                         l6 {
 151                                                 regulator-min-microvolt = <1800000>;
 152                                                 regulator-max-microvolt = <1800000>;
 153
 154                                                 regulator-boot-on;
 155                                         };
 156
 157                                         l7 {
 158                                                 regulator-min-microvolt = <1800000>;
 159                                                 regulator-max-microvolt = <1800000>;
 160
 161                                                 regulator-boot-on;
 162                                         };
 163
 164                                         l8 {
 165                                                 regulator-min-microvolt = <1800000>;
 166                                                 regulator-max-microvolt = <1800000>;
 167                                         };
 168
 169                                         l9 {
 170                                                 regulator-min-microvolt = <1800000>;
 171                                                 regulator-max-microvolt = <2950000>;
 172                                         };
 173
 174                                         l11 {
 175                                                 regulator-min-microvolt = <1300000>;
 176                                                 regulator-max-microvolt = <1350000>;
 177                                         };
 178
 179                                         l12 {
 180                                                 regulator-min-microvolt = <1800000>;
 181                                                 regulator-max-microvolt = <1800000>;
 182
 183                                                 regulator-always-on;
 184                                                 regulator-boot-on;
 185                                         };
 186
 187                                         l13 {
 188                                                 regulator-min-microvolt = <1800000>;
 189                                                 regulator-max-microvolt = <2950000>;
 190
 191                                                 regulator-boot-on;
 192                                         };
 193
 194                                         l14 {
 195                                                 regulator-min-microvolt = <1800000>;
 196                                                 regulator-max-microvolt = <1800000>;
 197                                         };
 198
 199                                         l15 {
 200                                                 regulator-min-microvolt = <2050000>;
 201                                                 regulator-max-microvolt = <2050000>;
 202                                         };
 203
 204                                         l16 {
 205                                                 regulator-min-microvolt = <2700000>;
 206                                                 regulator-max-microvolt = <2700000>;
 207                                         };
 208
 209                                         l17 {
 210                                                 regulator-min-microvolt = <2700000>;
 211                                                 regulator-max-microvolt = <2700000>;
 212                                         };
 213
 214                                         l18 {
 215                                                 regulator-min-microvolt = <2850000>;
 216                                                 regulator-max-microvolt = <2850000>;
 217                                         };
 218
 219                                         l19 {
 220                                                 regulator-min-microvolt = <3300000>;
 221                                                 regulator-max-microvolt = <3300000>;
 222                                         };
 223
 224                                         l20 {
 225                                                 regulator-min-microvolt = <2950000>;
 226                                                 regulator-max-microvolt = <2950000>;
 227
 228                                                 regulator-allow-set-load;
 229                                                 regulator-boot-on;
 230                                                 regulator-system-load = <200000>;
 231                                         };
 232
 233                                         l21 {
 234                                                 regulator-min-microvolt = <2950000>;
 235                                                 regulator-max-microvolt = <2950000>;
 236
 237                                                 regulator-boot-on;
 238                                         };
 239
 240                                         l22 {
 241                                                 regulator-min-microvolt = <3000000>;
 242                                                 regulator-max-microvolt = <3000000>;
 243                                         };
 244
 245                                         l23 {
 246                                                 regulator-min-microvolt = <2800000>;
 247                                                 regulator-max-microvolt = <2800000>;
 248                                         };
 249
 250                                         l24 {
 251                                                 regulator-min-microvolt = <3075000>;
 252                                                 regulator-max-microvolt = <3075000>;
 253
 254                                                 regulator-boot-on;
 255                                         };
 256                                 };
 257                         };
 258                 };
 259         };
 260
 261         vreg_boost: vreg-boost {
 262                 compatible = "regulator-fixed";
 263
 264                 regulator-name = "vreg-boost";
 265                 regulator-min-microvolt = <3150000>;
 266                 regulator-max-microvolt = <3150000>;
 267
 268                 regulator-always-on;
 269                 regulator-boot-on;
 270
 271                 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
 272                 enable-active-high;
 273
 274                 pinctrl-names = "default";
 275                 pinctrl-0 = <&boost_bypass_n_pin>;
 276      };
 277 };
 278
 279 &soc {
 280         sdhci@f9824900 {
 281                 status = "ok";
 282
 283                 vmmc-supply = <&pm8941_l20>;
 284                 vqmmc-supply = <&pm8941_s3>;
 285
 286                 bus-width = <8>;
 287                 non-removable;
 288
 289                 pinctrl-names = "default";
 290                 pinctrl-0 = <&sdhc1_pin_a>;
 291         };
 292
 293         sdhci@f98a4900 {
 294                 status = "ok";
 295
 296                 bus-width = <4>;
 297
 298                 vmmc-supply = <&pm8941_l21>;
 299                 vqmmc-supply = <&pm8941_l13>;
 300
 301                 cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
 302
 303                 pinctrl-names = "default";
 304                 pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
 305         };
 306
 307         serial@f991e000 {
 308                 status = "ok";
 309
 310                 pinctrl-names = "default";
 311                 pinctrl-0 = <&blsp1_uart2_pin_a>;
 312         };
 313
 314         i2c@f9924000 {
 315                 status = "ok";
 316
 317                 clock-frequency = <355000>;
 318                 qcom,src-freq = <50000000>;
 319
 320                 pinctrl-names = "default";
 321                 pinctrl-0 = <&i2c2_pins>;
 322
 323                 synaptics@2c {
 324                         compatible = "syna,rmi4-i2c";
 325                         reg = <0x2c>;
 326
 327                         interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
 328
 329                         #address-cells = <1>;
 330                         #size-cells = <0>;
 331
 332                         vdd-supply = <&pm8941_l22>;
 333                         vio-supply = <&pm8941_lvs3>;
 334
 335                         pinctrl-names = "default";
 336                         pinctrl-0 = <&ts_int_pin>;
 337
 338                         syna,startup-delay-ms = <10>;
 339
 340                         rmi4-f01@1 {
 341                                 reg = <0x1>;
 342                                 syna,nosleep-mode = <1>;
 343                         };
 344
 345                         rmi4-f11@11 {
 346                                 reg = <0x11>;
 347                                 touchscreen-inverted-x;
 348                                 syna,sensor-type = <1>;
 349                         };
 350                 };
 351         };
 352
 353         pinctrl@fd510000 {
 354                 blsp1_uart2_pin_a: blsp1-uart2-pin-active {
 355                         rx {
 356                                 pins = "gpio5";
 357                                 function = "blsp_uart2";
 358
 359                                 drive-strength = <2>;
 360                                 bias-pull-up;
 361                         };
 362
 363                         tx {
 364                                 pins = "gpio4";
 365                                 function = "blsp_uart2";
 366
 367                                 drive-strength = <4>;
 368                                 bias-disable;
 369                         };
 370                 };
 371
 372                 i2c2_pins: i2c2 {
 373                         mux {
 374                                 pins = "gpio6", "gpio7";
 375                                 function = "blsp_i2c2";
 376
 377                                 drive-strength = <2>;
 378                                 bias-disable;
 379                         };
 380                 };
 381
 382                 sdhc1_pin_a: sdhc1-pin-active {
 383                         clk {
 384                                 pins = "sdc1_clk";
 385                                 drive-strength = <16>;
 386                                 bias-disable;
 387                         };
 388
 389                         cmd-data {
 390                                 pins = "sdc1_cmd", "sdc1_data";
 391                                 drive-strength = <10>;
 392                                 bias-pull-up;
 393                         };
 394                 };
 395
 396                 sdhc2_cd_pin_a: sdhc2-cd-pin-active {
 397                         pins = "gpio62";
 398                         function = "gpio";
 399
 400                         drive-strength = <2>;
 401                         bias-disable;
 402                  };
 403
 404                 sdhc2_pin_a: sdhc2-pin-active {
 405                         clk {
 406                                 pins = "sdc2_clk";
 407                                 drive-strength = <10>;
 408                                 bias-disable;
 409                         };
 410
 411                         cmd-data {
 412                                 pins = "sdc2_cmd", "sdc2_data";
 413                                 drive-strength = <6>;
 414                                 bias-pull-up;
 415                         };
 416                 };
 417
 418                 ts_int_pin: touch-int {
 419                         pin {
 420                                 pins = "gpio61";
 421                                 function = "gpio";
 422
 423                                 drive-strength = <2>;
 424                                 bias-disable;
 425                                 input-enable;
 426                         };
 427                 };
 428         };
 429
 430         dma-controller@f9944000 {
 431                 qcom,controlled-remotely;
 432         };
 433 };
 434
 435 &spmi_bus {
 436         pm8941@0 {
 437                 charger@1000 {
 438                         qcom,fast-charge-safe-current = <1500000>;
 439                         qcom,fast-charge-current-limit = <1500000>;
 440                         qcom,dc-current-limit = <1800000>;
 441                         qcom,fast-charge-safe-voltage = <4400000>;
 442                         qcom,fast-charge-high-threshold-voltage = <4350000>;
 443                         qcom,fast-charge-low-threshold-voltage = <3400000>;
 444                         qcom,auto-recharge-threshold-voltage = <4200000>;
 445                         qcom,minimum-input-voltage = <4300000>;
 446                 };
 447
 448                 gpios@c000 {
 449                         boost_bypass_n_pin: boost-bypass {
 450                                 pins = "gpio21";
 451                                 function = "normal";
 452                         };
 453
 454                         gpio_keys_pin_a: gpio-keys-active {
 455                                 pins = "gpio2", "gpio3", "gpio4", "gpio5";
 456                                 function = "normal";
 457
 458                                 bias-pull-up;
 459                                 power-source = <PM8941_GPIO_S3>;
 460                         };
 461                 };
 462
 463                 coincell@2800 {
 464                         status = "ok";
 465                         qcom,rset-ohms = <2100>;
 466                         qcom,vset-millivolts = <3000>;
 467                 };
 468         };
 469
 470         pm8941@1 {
 471                 wled@d800 {
 472                         status = "ok";
 473
 474                         qcom,cs-out;
 475                         qcom,current-limit = <20>;
 476                         qcom,current-boost-limit = <805>;
 477                         qcom,switching-freq = <1600>;
 478                         qcom,ovp = <29>;
 479                         qcom,num-strings = <2>;
 480                 };
 481         };
 482 };