ARM: dts: enable PCIe support for Cygnus
[deliverable/linux.git] / arch / arm / boot / dts / r8a7779-marzen.dts
1 /*
2 * Device Tree Source for the Marzen board
3 *
4 * Copyright (C) 2013 Renesas Solutions Corp.
5 * Copyright (C) 2013 Simon Horman
6 *
7 * This file is licensed under the terms of the GNU General Public License
8 * version 2. This program is licensed "as is" without any warranty of any
9 * kind, whether express or implied.
10 */
11
12 /dts-v1/;
13 #include "r8a7779.dtsi"
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/interrupt-controller/irq.h>
16
17 / {
18 model = "marzen";
19 compatible = "renesas,marzen", "renesas,r8a7779";
20
21 aliases {
22 serial2 = &scif2;
23 serial4 = &scif4;
24 };
25
26 chosen {
27 bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
28 stdout-path = &scif2;
29 };
30
31 memory {
32 device_type = "memory";
33 reg = <0x60000000 0x40000000>;
34 };
35
36 fixedregulator3v3: fixedregulator@0 {
37 compatible = "regulator-fixed";
38 regulator-name = "fixed-3.3V";
39 regulator-min-microvolt = <3300000>;
40 regulator-max-microvolt = <3300000>;
41 regulator-boot-on;
42 regulator-always-on;
43 };
44
45 lan0@18000000 {
46 compatible = "smsc,lan9220", "smsc,lan9115";
47 reg = <0x18000000 0x100>;
48 pinctrl-0 = <&lan0_pins>;
49 pinctrl-names = "default";
50
51 phy-mode = "mii";
52 interrupt-parent = <&irqpin0>;
53 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
54 smsc,irq-push-pull;
55 reg-io-width = <4>;
56 vddvario-supply = <&fixedregulator3v3>;
57 vdd33a-supply = <&fixedregulator3v3>;
58 };
59
60 leds {
61 compatible = "gpio-leds";
62 led2 {
63 gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
64 };
65 led3 {
66 gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
67 };
68 led4 {
69 gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
70 };
71 };
72
73 vga-encoder {
74 compatible = "adi,adv7123";
75
76 ports {
77 #address-cells = <1>;
78 #size-cells = <0>;
79
80 port@0 {
81 reg = <0>;
82 vga_enc_in: endpoint {
83 remote-endpoint = <&du_out_rgb0>;
84 };
85 };
86 port@1 {
87 reg = <1>;
88 vga_enc_out: endpoint {
89 remote-endpoint = <&vga_in>;
90 };
91 };
92 };
93 };
94
95 vga {
96 compatible = "vga-connector";
97
98 port {
99 vga_in: endpoint {
100 remote-endpoint = <&vga_enc_out>;
101 };
102 };
103 };
104
105 lvds-encoder {
106 compatible = "thine,thc63lvdm83d";
107
108 ports {
109 #address-cells = <1>;
110 #size-cells = <0>;
111
112 port@0 {
113 reg = <0>;
114 lvds_enc_in: endpoint {
115 remote-endpoint = <&du_out_rgb1>;
116 };
117 };
118 port@1 {
119 reg = <1>;
120 lvds_connector: endpoint {
121 };
122 };
123 };
124 };
125 };
126
127 &du {
128 pinctrl-0 = <&du_pins>;
129 pinctrl-names = "default";
130 status = "okay";
131
132 ports {
133 port@0 {
134 endpoint {
135 remote-endpoint = <&vga_enc_in>;
136 };
137 };
138 port@1 {
139 endpoint {
140 remote-endpoint = <&lvds_enc_in>;
141 };
142 };
143 };
144 };
145
146 &irqpin0 {
147 status = "okay";
148 };
149
150 &extal_clk {
151 clock-frequency = <31250000>;
152 };
153
154 &tmu0 {
155 status = "okay";
156 };
157
158 &pfc {
159 du_pins: du {
160 du0 {
161 renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
162 renesas,function = "du0";
163 };
164 du1 {
165 renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
166 renesas,function = "du1";
167 };
168 };
169
170 lan0_pins: lan0 {
171 intc {
172 renesas,groups = "intc_irq1_b";
173 renesas,function = "intc";
174 };
175 lbsc {
176 renesas,groups = "lbsc_ex_cs0";
177 renesas,function = "lbsc";
178 };
179 };
180
181 scif2_pins: serial2 {
182 renesas,groups = "scif2_data_c";
183 renesas,function = "scif2";
184 };
185
186 scif4_pins: serial4 {
187 renesas,groups = "scif4_data";
188 renesas,function = "scif4";
189 };
190
191 sdhi0_pins: sd0 {
192 renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
193 renesas,function = "sdhi0";
194 };
195
196 hspi0_pins: hspi0 {
197 renesas,groups = "hspi0";
198 renesas,function = "hspi0";
199 };
200 };
201
202 &scif2 {
203 pinctrl-0 = <&scif2_pins>;
204 pinctrl-names = "default";
205
206 status = "okay";
207 };
208
209 &scif4 {
210 pinctrl-0 = <&scif4_pins>;
211 pinctrl-names = "default";
212
213 status = "okay";
214 };
215
216 &sdhi0 {
217 pinctrl-0 = <&sdhi0_pins>;
218 pinctrl-names = "default";
219
220 vmmc-supply = <&fixedregulator3v3>;
221 bus-width = <4>;
222 status = "okay";
223 };
224
225 &hspi0 {
226 pinctrl-0 = <&hspi0_pins>;
227 pinctrl-names = "default";
228 status = "okay";
229 };
This page took 0.035948 seconds and 5 git commands to generate.