2 * Device Tree Source for the Lager board
4 * Copyright (C) 2013-2014 Renesas Solutions Corp.
5 * Copyright (C) 2014 Cogent Embedded, Inc.
7 * This file is licensed under the terms of the GNU General Public License
8 * version 2. This program is licensed "as is" without any warranty of any
9 * kind, whether express or implied.
13 #include "r8a7790.dtsi"
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/input/input.h>
19 compatible = "renesas,lager", "renesas,r8a7790";
27 bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
28 stdout-path = &scifa0;
32 device_type = "memory";
33 reg = <0 0x40000000 0 0x40000000>;
37 device_type = "memory";
38 reg = <1 0x40000000 0 0xc0000000>;
47 compatible = "gpio-keys";
53 debounce-interval = <20>;
54 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
60 debounce-interval = <20>;
61 gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
67 debounce-interval = <20>;
68 gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
74 debounce-interval = <20>;
75 gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
80 compatible = "gpio-leds";
82 gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
85 gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
88 gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
92 fixedregulator3v3: fixedregulator@0 {
93 compatible = "regulator-fixed";
94 regulator-name = "fixed-3.3V";
95 regulator-min-microvolt = <3300000>;
96 regulator-max-microvolt = <3300000>;
101 vcc_sdhi0: regulator@1 {
102 compatible = "regulator-fixed";
104 regulator-name = "SDHI0 Vcc";
105 regulator-min-microvolt = <3300000>;
106 regulator-max-microvolt = <3300000>;
108 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
112 vccq_sdhi0: regulator@2 {
113 compatible = "regulator-gpio";
115 regulator-name = "SDHI0 VccQ";
116 regulator-min-microvolt = <1800000>;
117 regulator-max-microvolt = <3300000>;
119 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
125 vcc_sdhi2: regulator@3 {
126 compatible = "regulator-fixed";
128 regulator-name = "SDHI2 Vcc";
129 regulator-min-microvolt = <3300000>;
130 regulator-max-microvolt = <3300000>;
132 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
136 vccq_sdhi2: regulator@4 {
137 compatible = "regulator-gpio";
139 regulator-name = "SDHI2 VccQ";
140 regulator-min-microvolt = <1800000>;
141 regulator-max-microvolt = <3300000>;
143 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
151 clock-frequency = <20000000>;
155 pinctrl-0 = <&du_pins>;
156 pinctrl-names = "default";
159 renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
160 renesas,function = "du";
163 scif0_pins: serial0 {
164 renesas,groups = "scif0_data";
165 renesas,function = "scif0";
169 renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
170 renesas,function = "eth";
174 renesas,groups = "intc_irq0";
175 renesas,function = "intc";
178 scif1_pins: serial1 {
179 renesas,groups = "scif1_data";
180 renesas,function = "scif1";
184 renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
185 renesas,function = "sdhi0";
189 renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
190 renesas,function = "sdhi2";
194 renesas,groups = "mmc1_data8", "mmc1_ctrl";
195 renesas,function = "mmc1";
199 renesas,groups = "qspi_ctrl", "qspi_data4";
200 renesas,function = "qspi";
204 renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
206 renesas,function = "msiof1";
210 renesas,groups = "iic1";
211 renesas,function = "iic1";
215 renesas,groups = "iic2";
216 renesas,function = "iic2";
220 renesas,groups = "iic3";
221 renesas,function = "iic3";
225 renesas,groups = "usb0";
226 renesas,function = "usb0";
230 renesas,groups = "usb1";
231 renesas,function = "usb1";
235 renesas,groups = "usb2";
236 renesas,function = "usb2";
240 renesas,groups = "vin1_data8", "vin1_clk";
241 renesas,function = "vin1";
246 pinctrl-0 = <ðer_pins &phy1_pins>;
247 pinctrl-names = "default";
249 phy-handle = <&phy1>;
250 renesas,ether-link-active-low;
253 phy1: ethernet-phy@1 {
255 interrupt-parent = <&irqc0>;
256 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
257 micrel,led-mode = <1>;
266 pinctrl-0 = <&mmc1_pins>;
267 pinctrl-names = "default";
269 vmmc-supply = <&fixedregulator3v3>;
280 pinctrl-0 = <&qspi_pins>;
281 pinctrl-names = "default";
286 #address-cells = <1>;
288 compatible = "spansion,s25fl512s";
290 spi-max-frequency = <30000000>;
291 spi-tx-bus-width = <4>;
292 spi-rx-bus-width = <4>;
297 reg = <0x00000000 0x00040000>;
302 reg = <0x00040000 0x00400000>;
307 reg = <0x00440000 0x03bc0000>;
313 pinctrl-0 = <&scif0_pins>;
314 pinctrl-names = "default";
320 pinctrl-0 = <&scif1_pins>;
321 pinctrl-names = "default";
327 pinctrl-0 = <&msiof1_pins>;
328 pinctrl-names = "default";
333 compatible = "renesas,r2a11302ft";
335 spi-max-frequency = <6000000>;
342 pinctrl-0 = <&sdhi0_pins>;
343 pinctrl-names = "default";
345 vmmc-supply = <&vcc_sdhi0>;
346 vqmmc-supply = <&vccq_sdhi0>;
347 cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
352 pinctrl-0 = <&sdhi2_pins>;
353 pinctrl-names = "default";
355 vmmc-supply = <&vcc_sdhi2>;
356 vqmmc-supply = <&vccq_sdhi2>;
357 cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
362 cpu0-supply = <&vdd_dvfs>;
371 pinctrl-0 = <&iic1_pins>;
372 pinctrl-names = "default";
377 pinctrl-0 = <&iic2_pins>;
378 pinctrl-names = "default";
381 compatible = "adi,adv7180";
388 remote-endpoint = <&vin1ep0>;
395 pinctrl-names = "default";
396 pinctrl-0 = <&iic3_pins>;
399 vdd_dvfs: regulator@68 {
400 compatible = "dlg,da9210";
403 regulator-min-microvolt = <1000000>;
404 regulator-max-microvolt = <1000000>;
412 pinctrl-0 = <&usb0_pins>;
413 pinctrl-names = "default";
418 pinctrl-0 = <&usb1_pins>;
419 pinctrl-names = "default";
424 pinctrl-0 = <&usb2_pins>;
425 pinctrl-names = "default";
428 /* composite video input */
430 pinctrl-0 = <&vin1_pins>;
431 pinctrl-names = "default";
436 #address-cells = <1>;
440 remote-endpoint = <&adv7180>;